The title say all i want to know XD
Where can i Obtain CWM and how i Can Install it?
I read other thread but i don't understand all what i must do
PS sorry for the english
Go to CWM thread : here
You must root your device, and install busybox on your 2.1 Stock firmware.
thanks for the reply
I use a cm and i don't know if it incorporate cwm. How i can found it? What appened if i install in a cm that don't incorporate it?
If you have the latest cm then it has cwm included, best way to check is reboot to recovery, if recovery text is blue its xrecovery, if its orange then you already have cwm
Sent from my X10mini using XDA App
thanks to all for the info
No worries
Sent from my X10mini using XDA App
Related
Hi..
i am new here and i have one question..
How to install any rom..when i go to the recovery i cant find install zip from sd card....any idea?
Tnx
Sent from my GT-I9100 using XDA App
probably u have the standard kernel and no custom kernel with clockwork mod on your phone. "install from zip" is only supported in cwm
dzontra11 said:
Hi..
i am new here and i have one question..
How to install any rom..when i go to the recovery i cant find install zip from sd card....any idea?
Tnx
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
To install a ROM you MUST read the instructions in the thread where you got it. It's not just 1 procedure for all different ROMs.
Seriously, if you've not read the installation instructions in the ROM thread, DO NOT try and install it!!!
Try to understand ,,my English its not good enough..
Also ,,i never have a Galaxy before (only HTc phones) and flasing and root its totaly diferent then Htc....so because of that i need help.
TNx
Hi XDA'ers does anyone know if I can flash xRecovery from within CWM5 as my x10 USB port is bust (no repair possible) I am running the FXP50 kernel with BlackEditionHD ICS ROM and I can't flash any of my o other ROM's from within CWM5 as they're all GB based ROM's and CWM5 gives me a error I want to flash my old RevolutionHD ROM so not sure if will run on FXP50 all help appreciated, thanks in advance
Sent from my X10i using XDA App
XeX_DuBwoofer_x said:
Hi XDA'ers does anyone know if I can flash xRecovery from within CWM5 as my x10 USB port is bust (no repair possible) I am running the FXP50 kernel with BlackEditionHD ICS ROM and I can't flash any of my o other ROM's from within CWM5 as they're all GB based ROM's and CWM5 gives me a error I want to flash my old RevolutionHD ROM so not sure if will run on FXP50 all help appreciated, thanks in advance
Sent from my X10i using XDA App
Click to expand...
Click to collapse
U may be able to install xrec as a zip with root explorer. You'd have to place it in right place I'm system somewhere and set permissions for it manually (not sure how to do this but a member called Milton.bain has dome it few times try asking him for help)
Sent from my X10i using XDA App
laneyofdeath said:
U may be able to install xrec as a zip with root explorer. You'd have to place it in right place I'm system somewhere and set permissions for it manually (not sure how to do this but a member called Milton.bain has dome it few times try asking him for help)
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thanks for the info, i will look him up
Hello guys,
I´m new here, and this is my first thread. Yes, I am a noob and I hate myself. And I have searched for the answer to this question myself, however, I could not find it, so if anybody could please steer me in the right direction ´Thanks´ will be obtained by all who have helped
I have:
Xperia X10i Dutch T-mobile branded.
I have rooted it WITHOUT opening bootloader.
It has Busybox from the market on it, it has Titanium backup on it. It has the Xrecovery 0.3.zip on the sdcard.
But this first sentence in the installationprocess puzzles me:
A: Install the zip package via your current recovery
How can I do this? As far as I know, I have no recovery program installed, and if I do, I am not aware of it. Do I need to install some other recovery in order to install Xrecovery 0.3, or am I missing a vital piece of information here?
(I tried using the installer app. It gave me 3 red crosses, saying the first file was already there and the other two were 'read-only' if I am not mistaking)
Any help is appreciated
Did you use flashtool to root your phone?
Rom= Dixperia 7' avenger
Kernel= zdzihu
sent from my x10i using xda premium app
Also you can check if you have xrecovery by rebooting your phone and when boot hit back button until it enters xrecovery.
Rom= Dixperia 7' avenger
Kernel= zdzihu
sent from my x10i using xda premium app
z28tovette said:
Did you use flashtool to root your phone?
Rom= Dixperia 7' avenger
Kernel= zdzihu
sent from my x10i using xda premium app
Click to expand...
Click to collapse
No, I used a small program named Root_Unroot Sony 1.5
It was a really quick and easy thing, just had to open the program, turn USB debugging on, enable install other apps, put screen time on more then 1 minute, plug in the phone, and press Root on the program. After that it had Superuser and some version of Busybox installed. I added Titanium Backup and downloaded Busybox from the market again, since the thread on Xrecovery was very clear that I needed that version.
OK than you need to use flashtool.
Rom= Dixperia 7' avenger
Kernel= zdzihu
sent from my x10i using xda premium app
Like said earlier,you should install the latest flashtool as youll probably need that later.
Then you can install recovery and do a lot more.On my phone,when I switch it on,I wait for the blue led to light up,then I press the back button to enter xrecovery...
Sent from my X10i using xda premium
Ok thanks guys,
When I get home I will try Flashtool. I already have it op my pc but because I used that other program to Root I haven't used it yet.
(PS These Captcha's are HARD to read )
Here are a couple of guides i found helpful...
Flashtool guide...
http://forum.xda-developers.com/showthread.php?t=928343
youtube video...
http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps
I'm sure it will be helpful With all this easterstuff I haven't gotten around to anything else yet I'm afraid
Because mine sxs cannot be unlocked boot loader, I can't find the file anywhere... please if u do post them here... thanks so much
Sent from my Nexus 7 using xda premium
did you try to use the search button??
http://forum.xda-developers.com/showthread.php?t=1886460
I did, and this isnt s flashable zip, this is script to root on pc, flashable is in cwm?
Sent from my LT26i using xda premium
and how do you want to flash it?? there's a superuser flashable zip in the dev section (I think) but you need cwm installed, and to install cwm you need root, so you first have to use that pc script I posted.
With that you don't need the flashable superuser, but is still necessary after you flash some custom rom
let me get this straight...
u can't unlock your bootloader and yet u're asking for a flashable zip for CWM?????
uhh... enlighten everyone of us here please... we are all very confused if that's the case...
Thanks so much for ur post
For u who confuse, i cant unlock my bootloader, but i can root and than install cwm, than i flash a rom, but without bootloader unlocked, after u flash a rom, cwm and superuser will not work, which is why i need to reflash the zip of these two right after i flashed a rom
Cheers!
Sent from my LT26i using xda premium
and you can also use the root kit with the custom rom
regards
Which tool kit u talking about?
Sent from my LT26i using xda premium
waiflih said:
and how do you want to flash it?? there's a superuser flashable zip in the dev section (I think) but you need cwm installed, and to install cwm you need root, so you first have to use that pc script I posted.
With that you don't need the flashable superuser, but is still necessary after you flash some custom rom
Click to expand...
Click to collapse
Hi,
This "cwm-recovery.rar" it works on xperia miro?
I routed the phone, but still do not have the cwm. :crying:
Regards,
Jorge Moreira
goku16 said:
Which tool kit u talking about?
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
Bin4ry's
Jorge Moreira said:
Hi,
This "cwm-recovery.rar" it works on xperia miro?
I routed the phone, but still do not have the cwm. :crying:
Regards,
Jorge Moreira
Click to expand...
Click to collapse
No idea, you can try
waiflih said:
Bin4ry's
No idea, you can try
Click to expand...
Click to collapse
Hi,
Many thanks for your awnser.
If you do not give the phone continues to function properly, right?
Sorry to ask this, but I'm a dummy on the matter.
Kind regards,
Jorge Moreira
i cant root nether with doomlord su kit nor with root_with_restore_by_bin4ry_v13 my lt22i. i have a locked bootloader because it says 'wrong code' when i try to unlock it and i want to install a CWM/TWRP recovery. my sony lt22i has 6.2.A.1.100 build number. PLEASE I NEED YOUR HELP!!!
Hello guys,
When i flash the rom Cyanogen mod, i have got this output:installation aborted. What is problem ?
Thanks
gigitux said:
Hello guys,
When i flash the rom Cyanogen mod, i have got this output:installation aborted. What is problem ?
Thanks
Click to expand...
Click to collapse
You did not come from stock ics but from custom rom. Just read the instructions.
Sent from my ST25i using xda app-developers app
troullis2004 said:
You did not come from stock ics but from custom rom. Just read the instructions.
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
How do I install correctly cyanogenmod ?
Is it so hard to read the title of the first few threads ?
Thread moved to Q & A section, consider yourself warned.
hey guys, i have 2 simle maybe stupid questions but i would really apprecciate an answer:
1. can some tell me the difference between the fxp-144a-kumquat and fxp144-kumquat; what does that "a" mean?
2. if somebody knows if cm9 for xperia u has inbuild cwm or some recovery; and if yes, what recovery?
1.144a means it is later version than 144
2.It has CWM 6
Sent from my MT27i using xda app-developers app
installation aborted
Hey guys. I too am getting this same "aborted" message. I will admit, I had a custom ROM installed, but then I rebooted into the backup that cwmrecovery had created from the original Samsung ROM. It was from there that I tried to install the cyanogenmod. No luck... why? I followed all the instructions...
Guys, to install CM you must have Unlocked bootloader, stock ICS, CWM installed. Put the zip into your memory, reboot in CWM and install the zip, wipe data, cash and dalvick cashe and reboot.
pure2maestro said:
Hey guys. I too am getting this same "aborted" message. I will admit, I had a custom ROM installed, but then I rebooted into the backup that cwmrecovery had created from the original Samsung ROM. It was from there that I tried to install the cyanogenmod. No luck... why? I followed all the instructions...
Click to expand...
Click to collapse
Flash the boot.img from the CM9 zip using fastboot then flash the Rom
Tapatalked !
K thanks. I ended up fixing it by upgrading the new clockwork mod touch version. I think its required for cyanogen mod 10.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app