Hi, I'm using Eugene's froyo rom and currently getting only 8 hours tops of battery and many bugs along that. I'm wondering what I should do, should I go back to stock 2.1 or does anyone recommend a good rom? Also will flashing back to a 2.1 rom wipe my internal space like it did when I went to a 2.2 rom?
Sent from my GT-I9000 using XDA App
Try Bionix Fusion it gets great battery life. I flashed Eugenes Froyo and lost everything. When I went back to Fusion it did not wipe.
icandy75 said:
Try Bionix Fusion it gets great battery life. I flashed Eugenes Froyo and lost everything. When I went back to Fusion it did not wipe.
Click to expand...
Click to collapse
Then how you can flash back to 2.1? usin CWM.. fuzion.zip, flash done?
icandy75 said:
Try Bionix Fusion it gets great battery life. I flashed Eugenes Froyo and lost everything. When I went back to Fusion it did not wipe.
Click to expand...
Click to collapse
What do you mean when you said you lost everything? Did you loose the contents of /sdcard and /sdcard/sd ???
Both Eugene's and Som's ROM's wipe the data clean, and do not touch /sdcard and /sdcard/sd where all your personal stuff is usually stored.
@OP: are you running Eugene's ROM on the original Galaxy S or the Vibrant US variant?
I use Bionix Final i get 20+ hours of life, and i use it like non stop.
TR88 said:
Hi, I'm using Eugene's froyo rom and currently getting only 8 hours tops of battery and many bugs along that. I'm wondering what I should do, should I go back to stock 2.1 or does anyone recommend a good rom? Also will flashing back to a 2.1 rom wipe my internal space like it did when I went to a 2.2 rom?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Which version of Eugene's Froyo are you using? He's got two separate Froyo Rom's out and only updating one of them. Have you tried the lastest JPA Macnut?
Also, whenever I flash a new ROM I always wipe the battery stats thru ClockworkRecovery to get the most out of my battery life. As far as recommended ROM's go, I'm sticking with 2.1 ROMs for now since I need the GPS on my daily driver. Hope this helps a bit.
~SB
I just upgraded from my old Droid Eris to a new fascinate last friday and I've been messing around with it trying out different ROMs and such and i decided to install the ED01 v1.2 rom today. I was enjoying it until i found out that i couldn't recieve texts and when i sent them all it would send was a blank text...
I've since reverted back to stock and I was wondering if anyone could help me out because I was really enjoying the rom until i realized I wasnt getting texts.
What modem did you flash when you were running UKB 1.2?
*You should be running the EC01 or the ED01 modem. You can find the ODIN file for EC01 modem in the forums. Sadly, in order to have the ED01 radio, you need to go through Adrynalyne's process of retrieving it (which you can also find in the forums).
I think I was just running the EI01 regular baseband. I didn't know that was even a factor. I'm going to try to find everything you just mentioned haha, wish me luck
brooksryan19 said:
I just upgraded from my old Droid Eris to a new fascinate last friday and I've been messing around with it trying out different ROMs and such and i decided to install the ED01 v1.2 rom today. I was enjoying it until i found out that i couldn't recieve texts and when i sent them all it would send was a blank text...
I've since reverted back to stock and I was wondering if anyone could help me out because I was really enjoying the rom until i realized I wasnt getting texts.
Click to expand...
Click to collapse
actually i run into the same problem.. im on ec01 radio comm 1.2, i live in an area with poor service.. but i could usually send messages.. now if i lose service for more than 5-10 minutes.. i have to reboot phone to get them to send/recieve.. not even toggling airplane mode will bring it back.. ive tried *228 with no improvement
Ok so I reflashed a stock fully bloated 100% original rom and took the OTA update to Froyo which upgrades the modem to ED01 right? So i should be able to flash the community rom fine now without any problems right? or am i completely wrong?
brooksryan19 said:
Ok so I reflashed a stock fully bloated 100% original rom and took the OTA update to Froyo which upgrades the modem to ED01 right? So i should be able to flash the community rom fine now without any problems right? or am i completely wrong?
Click to expand...
Click to collapse
It should work if you followed adrynalyne's steps to getting ED01 with ED01 radio. Good luck!
Hey folks
Well I have had my share of messups with my vzn fsc.
Things are settled now as I have been Ble to figure out the stuff.
So after trying superclen, evilfascination, and community rom I have come to the conclusion that personally (and no offence to no one) I like the stock roms more but without the samsung and verizon bloatware.
Could you great guyz suggest me the best debloated and all stock rom which is smooth to operate, has great battery life and doesnt hVe any known issues.
I would b highly thankful for the help, pl link me to the threads guyz.
Regards
UPDATE : guyz the kind suggestion given my dnoyeb here in the second post is really awesome and i suggest all should try this.
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Click to expand...
Click to collapse
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt click here
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing click here
Install imnuts -100 voodoo (or -50 or stock voltage) click here
Installed latest su zip pack (probably not needed) click here
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package click here
The shortlight package click here
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
bmeek said:
That's exactly where I ended up before trying the miuiwiz rom... For some reason that I've yet to identify, I'm getting better battery life on miuiwiz. Launcher Pro, perhaps?
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
lord dredd said:
Thats awesome, how long hVe u been using it?
Also I actually want things as stock as poasible without the bloat.
Anything else u feel would be like that?
Click to expand...
Click to collapse
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
dnoyeb said:
Just leave off my last two steps and its about as stock as you can get.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
actually updating is gonna be an issue ;P
i am using the handset in India and have added Indian operator's settings in it so update via SETTINGS>ABOUT PHONE >SYSTEM UPDATES aint possible
so practically no way to flash the ed03 i guess
ED01 is not gonna be any issue as i can go back to dl09 eclair of adreyn anytime and then update to ed01 stock through his EA28 and ED01 updates.
after that ed03 ?????? i donno from where and how
if you have any other way of accomplishing all ur stuff then pl help
regards
dnoyeb said:
I ended up in going back to pure stock via odin. Then did the ota updates to ed03. From there did the following:
Odin cwm 2.5 from jt
3 finger on first boot into cwm
Install adryn's ed01 debloat/debing
Install imnuts -100 voodoo
Installed latest su zip pack (probably not needed)
Booted up, voodoo conversion
Then rebooted back to recovery, which is now 3.x after installing imnuts, installed following:
Sbrissen's tsm mod package
The shortlight package
Rebooted, all done.
Great battery life, runs great with launcherpro
Do you have the link to Sbrissen's TSM mod package? And, what is the shortlight package? Thanx!
Do you have the link for Sbrissen's TSM mod? And, what is the shortlight package? Thanx.
Sent from my SCH-I500
Click to expand...
Click to collapse
dnoyeb said:
Personally I like my scrollable widgets way to much to do miui.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
then install aluncher pro on miui
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
lord dredd said:
come on folks
just help me out here find a debloated ed01 ( without verizon crap ) and the method to update from evil fascination 3.5.x to it
regards
Click to expand...
Click to collapse
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
landshark68 said:
What more do you want than dnoyeb's instructions? It doesn't get more simple than that.
Click to expand...
Click to collapse
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
lord dredd said:
ok i am gonna try this out , but as i mentioned earlier i cant do OTA to ed03 as the handset is being used in India with indian operator settings
what i am gonna do is i ll update to ed01 as has been advised by adreyn ( that is stock dl09 then ea28 and then ed01)
after that i ll follow this thread
http://forum.xda-developers.com/showthread.php?t=1097355
and update the radio to ed03
is that alright ???
and if thats right then i ll follow the further instructions .
regards
EDIT 1 :
ok i couldnt wait for the replies to my post here and my Pms to you good guys as i have to go so i did the following
updated to Ed01 thru this
http://forum.xda-developers.com/showthread.php?t=1044474
then flashed the full Odin package of ed03 by imnut
then followed the process told by dnoyeb here
http://forum.xda-developers.com/showpost.php?p=14034421&postcount=2
at boot time verizon and android both were flashing but i still waited so now the system is fully booted
and i am gonna use it now
but the thing is the baseband and everything showz ed01 and not ed03 ???
regards
Click to expand...
Click to collapse
If you followed the steps by dnoyeb, then you are correctly set up on a debloated/deodexed ED01 ROM. Your baseband is the modem/radio and would not have changed after you followed Adrynalyne's post to get to ED01 quickly. You flashed imnuts' ED03 ODIN package which would have given you the stock ED03 ROM and kernel, but not the ED03 modem so you were still at ED01 modem which is fine. Then you followed dneyob's steps to flash the ED01 Debloated/Deodexed ROM which would have changed you to the ED01 build from ED03 build. For all intents and purposes ED01 and ED03 are the same thing. ED03 simply added in a fix for those people who could not receive the ED01 OTA update. The verizon and android both flashing at the same time is just an overlapping boot animation that happened because as I recall you could not do a complete data wipe/factory reset for fear of losing the verizon network while you are in India. So other than that little quirk of the overlapping boot animations, you should be exactly where you wanted to end up - a debloated ED01 ROM and with imnuts' -100mv kernel you should see better battery life if your phone can handle the undervolting.
Congrats!
i guess i did exactly as you have outlined,
i am now gonna caliberate the battery and will revert tomorrow about the backup and stuff
love ya
regards
when i first was learning how to root and flash, the thread for the evilfascination rom taught me everything i know. it does a great job in describing the steps to root and then flash the rom. i personally stuck with the evil fascination because its been so stable from the getgo and i love the overall theme of it. I kept getting peculiar bugs with comrom that i did not know enough yet to try and fix.
I suggest you go to the fascinate android development forum, and read the evil fascination thread.
I updated my post on the first page with links incase anyone else was looking at a quick rundown with links on how to get to a fully rooted / debinged / debloated type setup quickly.
Thanks a bunch matey.
God bless.
sent from my vzn fsc 1474 quadrant score
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Snakehn said:
for what is worth it, i did OTA to ED03, then flashed CWM and installed SU package, from there i debloated it myself with root explorer, replaced the few apk for the apps i wanted AOSP, cant get any cleaner than that.
Click to expand...
Click to collapse
so you mean u didnt go for debloated ed01 from adryn and not even the kernal ?
if yes then someday i might also wanna try this out, coz as and when i use 3G my battery drains like hell with the debloated setup as well.
would appreciate some more suggestions.
regards
with EA28 and ED04 + PBJ sv 531 kernal i get pretty much good backup and good 3g speeds too.
missed call was the issue which i am trying to solve with softlocker, seems to work
I flashed CM7 using ODIN and everything went perfectly. I have had a few issues with my new rom but it is still much better than stock. Now That im thinking about upgrading to cm9, i need to make a nandroid back up. Do I flash CWM in rom manager and make a nandroid that way? secondly, can i install cm9 over cm7 or do i need to revert back to stock then flash cm9?
Check out droidstyles guide to flashing from stock
Sent from my SCH-I500 using Tapatalk
Hey guys I'm having some trouble flashing jb roms. It always freezes during the install. I'm currently on ics.
Sent from my SGH-T959 using Tapatalk 2
I never flashed from ICS that I recall. However, you could Odin back to stock. Flash a good stable froyo and try to flash up from there.
I don't remember now if GB boot loader is 100% required but I have it on mine.
I'm getting ready to take an exam, if you haven't got it sorted before I return, I'll help you get running.
Thanks for the reply, I do have the gb bootloaders and I tried going back to stock and still no luck. I get a soft brick every time.
Sent from my SGH-T959 using Tapatalk 2
Which ICS ROM are you coming from, and are you doing full wipe?
I had a chance to think about it, and I had trouble getting up to 4.1 the first time I tried. I ended up stepping up gradually.
Odin'd to stock then went up to bionic, skipped GB, went up to latest CM ICS I believe... Then from there onto JB. Been fine since.
Its been a while but that's best as my memory cares to serve me.
I don't think its a real common problem, but occasionally something doesn't jive somewhere.
Hi,
Its not necessary BUT it will always work Odin back to stock and continuing. Once I tried to flash ICZen from FROYO but no luck. Then I ODIN back to stock then CM7 in the middle and ICS on top of it and it WORKED. I have flashed GB bootloaders to get easy key mapping (Anyway u have to flash it if it is required by the ROM) I have flahed JB 4.2.2 Avatar ROM on top of ICZen which has worked for me. woody has a [Guide] How to install ICS **EVERYTHING you need to know how to install them** so you can get an idea Sometimes you have to flash the ROM twice b/c CWM updation
Always do a CLEAN flash (FULL wipe) before flashing a new ROM
Hope u would get JB ROM flashed successfully
tc
Flash it twice
Sent from my SGH-T959 using xda app-developers app
testomat said:
Flash it twice
Sent from my SGH-T959 using xda app-developers app
Click to expand...
Click to collapse
Yes, this is good advice.