I tried the CM7.0.3 final of jerpelea with the custom kernel k012.
Now i want to restore my old 2.1 rom,but i can't find the way to restore the stock kernel.
How can i restore the stock kernel?
l_anfeta92 said:
I tried the CM7.0.3 final of jerpelea with the custom kernel k012.
Now i want to restore my old 2.1 rom,but i can't find the way to restore the stock kernel.
How can i restore the stock kernel?
Click to expand...
Click to collapse
Aww, don't use stock kernel... that's pure bullcrap,
Use this kernel- FreeKernel Mod 3.60 by Goro
This kernel is very stable and works on almost every baseband!
101% stock behaviour!
Private message me if you need stock, absolutely need it, I don;t want to post here and victimize all other poor fellows!
Install SEUS from Sony and do a full repair to install the stock kernel and stock everything.
Thanks to everything
Related
Hi there, i am currently using Wolfbreak's TW009 with BB.54 and zKernel, but i want to switch to Goro's 3.60 kernel (or 3.62) can i just flash Goro's kernel over zkernel or do i need to go back to Stock kernel first?, in that case is there a way to go back to stock kernel without resetting the whole thing? o.o
EDIT: i just flashed the new custom kernel over the old custom kernel, it worked
CescVicious said:
Hi there, i am currently using Wolfbreak's TW009 with BB.54 and zKernel, but i want to switch to Goro's 3.60 kernel (or 3.62) can i just flash Goro's kernel over zkernel or do i need to go back to Stock kernel first?, in that case is there a way to go back to stock kernel without resetting the whole thing? o.o
EDIT: i just flashed the new custom kernel over the old custom kernel, it worked
Click to expand...
Click to collapse
hi, i need help, i want on gb with unlocked bootloader and custom kernel and rom for live with walkman , i want to switch to ics , what should i do first ? flash the rom first or flash the ics ftf. file first ?
kokzhanjia said:
hi, i need help, i want on gb with unlocked bootloader and custom kernel and rom for live with walkman , i want to switch to ics , what should i do first ? flash the rom first or flash the ics ftf. file first ?
Click to expand...
Click to collapse
Make sure ya get all files needed before doing anything Ya need to (1) unlock bootloader, then (2)flash required Kernel for ICS. Then (3)get to the recovery mode provided along with the Kernel.Next, (4)flash the ROM and there ya go, (5)Reboot and Enjoy. Hope Helps
Whitefang
CescVicious said:
Hi there, i am currently using Wolfbreak's TW009 with BB.54 and zKernel, but i want to switch to Goro's 3.60 kernel (or 3.62) can i just flash Goro's kernel over zkernel or do i need to go back to Stock kernel first?, in that case is there a way to go back to stock kernel without resetting the whole thing? o.o
EDIT: i just flashed the new custom kernel over the old custom kernel, it worked
Click to expand...
Click to collapse
To be precise, If ya in locked bootloader status, full wipe and clear cache partition (note these action will getya System Data wiped along) will get ya back to stock kernel everytime. If ya in unlocked bootloader status, just get ya Stock Kernel for Unlocked Bootloader X10 to be flashed via flashtool, then ya will get it worked, your ROM won't be affected. Just RAM and governors and little tweak added within the kernel you flashed. Hope helps
whitefang
Hey there,
I have a Xperia neo with unlocked bootloader and Inteks clean Kernel and Stock Rom.
Before i went back to stock rom i was using different custom Roms Like miui or Cynagenmod. Now that im back to Stock i noticed that my wifi-connection is not that good like with a custom rom.
I always wipe my data before flashing another rom, so that shouln´t be the problem.
My question is now ? Is there way to get the Wifi library/apk from the custom rom and simply install it to custom rom ?
If yes where do i get these files
Pät said:
Hey there,
I have a Xperia neo with unlocked bootloader and Inteks clean Kernel and Stock Rom.
Before i went back to stock rom i was using different custom Roms Like miui or Cynagenmod. Now that im back to Stock i noticed that my wifi-connection is not that good like with a custom rom.
I always wipe my data before flashing another rom, so that shouln´t be the problem.
My question is now ? Is there way to get the Wifi library/apk from the custom rom and simply install it to custom rom ?
If yes where do i get these files
Click to expand...
Click to collapse
You will need modded kernel to get the libs...
adridu59 said:
You will need modded kernel to get the libs...
Click to expand...
Click to collapse
Right now i have Inteks Kernel, so you mean, if i get the wifi.lib from a miui rom i will need the specific Kernel for this rom e.g. Jasonsteins Kernel.
Then stock rom would work with the new wifi lib, but probaly nothing else : ?
So I am currently using slade's Zombie kernal and GinTonic rom on my x10 mini pro.
Sorry if this has already been asked but I want to switch over to nAa's MiniCM9.
Whats the best way to do it? Do I need to revert back to stock first? Should I flash the kernal first, then the rom?
Do I need to update CWM? Currently on CWM v 3.2 (Haven't flashed nor switched rom's etc in a long time)
confuserr said:
So I am currently using slade's Zombie kernal and GinTonic rom on my x10 mini pro.
Sorry if this has already been asked but I want to switch over to nAa's MiniCM9.
Whats the best way to do it? Do I need to revert back to stock first? Should I flash the kernal first, then the rom?
Do I need to update CWM? Currently on CWM v 3.2 (Haven't flashed nor switched rom's etc in a long time)
Click to expand...
Click to collapse
You don't need to revert to stock first.
You flash the kernel first, it is pre-loaded with the latest CWM.
At first boot off the new kernel, go into CWM and install MiniCM9.
that's it really
Could someone please host xperia mini pro sk17i 4.0.2.A.0.58 stock kernel, just the kernel. I've made a nandroid backup, but when i'm trying to restore it, i'm having a bootloop, i guess i need to flash the kernel after i flash with a custom one. Tried to search in this forum, but no success. Or is it any other method to which i can extract the kernel from nandroid backup? Currently i'm using kamarush v3 kernel with cwm v5.0.27. thanks in advance.
irfan.zee said:
Could someone please host xperia mini pro sk17i 4.0.2.A.0.58 stock kernel, just the kernel. I've made a nandroid backup, but when i'm trying to restore it, i'm having a bootloop, i guess i need to flash the kernel after i flash with a custom one. Tried to search in this forum, but no success. Or is it any other method to which i can extract the kernel from nandroid backup? Currently i'm using kamarush v3 kernel with cwm v5.0.27. thanks in advance.
Click to expand...
Click to collapse
I searched for the kernel, too. Just flash the kernel.sin from the .58 ftf.
Or try Rage Kernel for 2.3.4 or X kernel
Download this ftf file
http://forum.xda-developers.com/showthread.php?t=1341460
and use Flashtool to flash just kernel.sin .(uncheck everything else )
That should be equivalent to flashing stock kernel
mihahn said:
I searched for the kernel, too. Just try Rage Kernel for 2.3.4 or X kernel
Click to expand...
Click to collapse
can stock rom using a custom kernel? i dont want to brick my phone again...
karandpr said:
Download this ftf file
http://forum.xda-developers.com/showthread.php?t=1341460
and use Flashtool to flash just kernel.sin .(uncheck everything else )
That should be equivalent to flashing stock kernel
Click to expand...
Click to collapse
i've read those thread, but that's not what i'm looking for. The whole ftf file is 260 mb while the kernel only would be aroud 10-15 mb in size. What I'm looking for is stock GB kernel only.
irfan.zee said:
can stock rom using a custom kernel? i dont want to brick my phone again...
i've read those thread, but that's not what i'm looking for. The whole ftf file is 260 mb while the kernel only would be aroud 10-15 mb in size. What I'm looking for is stock GB kernel only.
Click to expand...
Click to collapse
Yes it works with rage kernel for 2.3.4. It works great, I tried it!
The thing with the kernel is okay, but if it doesn't work flash the whole rom, don't exclude anything, your phone will boot up. Root it and install cwm. Then you can restore your old backup...
mihahn said:
Yes it works with rage kernel for 2.3.4. It works great, I tried it!
The thing with the kernel is okay, but if it doesn't work flash the whole rom, don't exclude anything, your phone will boot up. Root it and install cwm. Then you can restore your old backup...
Click to expand...
Click to collapse
ok i'll try... Thanks
Finally found a stock kernel, although wasn't I expected. Link to thread here
I have installed CM9 and not really satisfied after using it for 1 day... its quite unstable... now i want to downgrade to my stock rom. Is that possible? Please help.
tpteam6 said:
I have installed CM9 and not really satisfied after using it for 1 day... its quite unstable... now i want to downgrade to my stock rom. Is that possible? Please help.
Click to expand...
Click to collapse
You are joking right?
Have you tried this CM9/
Neo
Neo V
Its the OFFICIAL STABLE cyanogenmod for the NEO. It is VERY STABLE and has everything working.
Apart from that, to revert back to stock, just flash a stock kernel (Or any modded kernel for stock) and restore the backup you made before flashing the cm9 rom.
tahnks
gregbradley said:
You are joking right?
Have you tried this CM9/
http://download.cyanogenmod.com/?type=stable&device=hallon
Its the OFFICIAL STABLE cyanogenmod for the NEO. It is VERY STABLE and has everything working.
Apart from that, to revert back to stock, just flash a stock kernel (Or any modded kernel for stock) and restore the backup you made before flashing the cm9 rom.
Click to expand...
Click to collapse
The roms that you have suggested are for "neo". i am using "neo v" and the reson i wanna go back to stock is because i con not onnect to my gmail account with cm9 over data connection. Its giving me some sort of an error: can not establish reliable connection....."...
now for going back to stock ics can i just flash it via cwm and i will be back in stock ics? dont i need to flash karnel or anything like that?
tpteam6 said:
The roms that you have suggested are for "neo". i am using "neo v" and the reson i wanna go back to stock is because i con not onnect to my gmail account with cm9 over data connection. Its giving me some sort of an error: can not establish reliable connection....."...
now for going back to stock ics can i just flash it via cwm and i will be back in stock ics? dont i need to flash karnel or anything like that?
Click to expand...
Click to collapse
I just added the link for the neo v
Yes, you need stock kernel.(or modded kernel for stock roms)
The kernel for CM will not work with stock rom.
My suggestion is to try the stable cm9 for neo v from my link. If you are still unhappy then download a stock kernel, flash it it fastboot then restore your stock backup in recovery.
Do remember, if you flash stock kernel you will have to install a recovery. Or you can flash the alliance kernel from this thread
Tahnks
gregbradley said:
I just added the link for the neo v
Yes, you need stock kernel.(or modded kernel for stock roms)
The kernel for CM will not work with stock rom.
My suggestion is to try the stable cm9 for neo v from my link. If you are still unhappy then download a stock kernel, flash it it fastboot then restore your stock backup in recovery.
Do remember, if you flash stock kernel you will have to install a recovery. Or you can flash the alliance kernel from this thread
Click to expand...
Click to collapse
well i think im in trouble now... i havent kept any backup of the stock rom. So cant i just flash the stock karnel then install the stock rom via cwm?
tpteam6 said:
well i think im in trouble now... i havent kept any backup of the stock rom. So cant i just flash the stock karnel then install the stock rom via cwm?
Click to expand...
Click to collapse
Rule number 1
Always backup, just in case you **** up!
Anyway, no problem, there are several options.
Find a stock .ftf in the dev section and flash that in flashtool after you have flashed the stock kernel.
Or, repair phone software using PCCompanion.
This will revert your phone to factory settings (Out of the box).
Or just follow the instructions in any "stock" based custom rom. I recommend Ice cream Pureness. Its a very good stock ICS based rom, fully functional and stable
tutorial
gregbradley said:
Rule number 1
Always backup, just in case you **** up!
Anyway, no problem, there are several options.
Find a stock .ftf in the dev section and flash that in flashtool after you have flashed the stock kernel.
Or, repair phone software using PCCompanion.
This will revert your phone to factory settings (Out of the box).
Or just follow the instructions in any "stock" based custom rom. I recommend Ice cream Pureness. Its a very good stock ICS based rom, fully functional and stable
Click to expand...
Click to collapse
is there is any specific tutorial on this? or download links for .ftf, stock karnel?
thanks... i have flashed stock karnel then installed stock rom... it worked like charm!!...