I was flashing cwm recovery thru odin and my phone got stuck on boot screen. Now I CAN'T get into recovery, but I CAN get into odin mode. But when I try to flash a rom in odin, it fails and says, "Complete(Write) operation failed." Does anyone have an idea how to get my GS2 working?
dvice19 said:
I was flashing cwm recovery
Explain file what you are flashing for CWM recovery .
Reads as you have flashed a CWM file through ODIN .
jje
Click to expand...
Click to collapse
I suppose you can get it to work as a paperweight...
I was trying to flash:
[KERNEL][2.3.4][cwm4.0.0.8] ⇒☆Jame Bond☆♡Care Bear♡ v①.⑦.③★Clockwork-Ra★
thru odin
http://forum.xda-developers.com/showthread.php?t=1108499
or
Via Odin and download mode flash a stock rom is all i can suggest .
jje
ya I'm screwed
try choosing a different file. question though, do you have a nandroid back up?
I did this on my SGS.
I removed the battery, put it back after a while and then I could access download mode. Flashed a stock ROM via Odin and it went fine.
Good luck!
I tried flashing a few different files thru odin. It's kinda weird, if I flash a kernel, it will work and go green and pass. But any rom I try will go red and fail and give that error.
I did have nandroid backup from a long time ago. But there is no way I can get to that cuz I cant boot into recovery.
Thank god!! Thanks for your help folks!! Got it working with another usb cable!!! That was scary
Well done! And welcome to the "flash-a-cwm-mod-in-Odin-club"...
A (hopefully) small, exclusive and dumb club
Related
Hi all
I have recived a I9100 from a friend and I am trying to fix it for her... It went dead after she flashed a costum rom to her device...
Recovery does not work either
What I have tried
flashing a stock rom
flashing a kernel
flashing bootloader
flashing unbrick file using ASB box
flashing the handset with SPT box
flashing .pit
repartion
---------------------------------
SPT box flashing log
Detect Phone Connect ...
Connect Phone OK.
Get PIT for Mapping ...
Sending Boot Data ...
Sending Sbl Data ...
Sending Param Data ...
Sending zImage Data ...
Sending Factoryfs Data ...
Sending Data Data ...
Sending Cache Data ...
Sending Hidden Data ...
Please Wait Reboot Phone ...
Update Flash OK!
Total Time: 146.4 s
My guess is that it is NAND rw problem, and I will have to wait for my riff box service cables to arrive, so I can jtag it back to life (I have the box, they forgot to ship the service cables)
Any ideas is appriciated
Best regards
You actually see the logo? Can you get into Download mode? Not recovery.
If not you either need to Jtag or she has somehow triggered the super brick bug. Then the device can't even be repaired with the RIFF box.
TheSniperFan said:
You actually see the logo? Can you get into Download mode? Not recovery.
If not you either need to Jtag or she has somehow triggered the super brick bug. Then the device can't even be repaired with the RIFF box.
Click to expand...
Click to collapse
Yup, it is stuck at the Samsung GSII logo...
I can easily get into Download mode... But I have no recovery... Im thinking that it is a eMMC fault, I am trying to find a place to buy the eMMC and get it replaced/reballed
Well if you can get into Download mode, I'd suggest you try flashing the CM9 resurrection edition. It's the only "custom Rom installation package" I know that comes with everything to start from every base.
If it's really a broken emmc chip, you better have the knowledge to replace it yourself (or know someone who has). It's neither an easy nor cheap procedure.
TheSniperFan said:
Well if you can get into Download mode, I'd suggest you try flashing the CM9 resurrection edition. It's the only "custom Rom installation package" I know that comes with everything to start from every base.
If it's really a broken emmc chip, you better have the knowledge to replace it yourself (or know someone who has). It's neither an easy nor cheap procedure.
Click to expand...
Click to collapse
My brother has the right equipment at work...
I will try to flash that to it... Could you post a link??
Btw how am I supposed to flash it, as I have no recovery mode??
CM9 Resurrection is flashed via Odin in download mode.
MistahBungle said:
CM9 Resurrection is flashed via Odin in download mode.
Click to expand...
Click to collapse
Hmm can you post a link then?? I get a .zip that is CWM flashable
Ratata82 said:
Hmm can you post a link then?? I get a .zip that is CWM flashable
Click to expand...
Click to collapse
Im at a loss here... Why do you keep on going on about recovery mode," Hmm can you post a link then?? I get a .zip that is CWM flashable ", when you say you have none but can easily get into download mode!!!!.
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
Read the Galaxy S2 guide here how to use Odin is also there.
How to fix a soft brick is here
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
bored_stupid said:
Im at a loss here... Why do you keep on going on about recovery mode," Hmm can you post a link then?? I get a .zip that is CWM flashable ", when you say you have none but can easily get into download mode!!!!.
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
Read the Galaxy S2 guide here how to use Odin is also there.
How to fix a soft brick is here
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
Click to expand...
Click to collapse
I apparently only found the CWM files, instead of the tar, that's why I was talking about CWM... but it is still dead...
Okay, you must have misunderstood me... I know how to use Odin, I know how to recover from a Soft brick, I know how to recover from hardbricks using JTAG... I am not a noob
I have all Samsung professional tools, riff, SPT, medusa, asb etc...
Ratata82 said:
I apparently only found the CWM files, instead of the tar, that's why I was talking about CWM... but it is still dead...
Okay, you must have misunderstood me... I know how to use Odin, I know how to recover from a Soft brick, I know how to recover from hardbricks using JTAG... I am not a noob
I have all Samsung professional tools, riff, SPT, medusa, asb etc...
Click to expand...
Click to collapse
Then accept my appologies. the link to the CM9 odin flashable is live and it is a .tar file.
Good luck
bored_stupid said:
Then accept my appologies. the link to the CM9 odin flashable is live and it is a .tar file.
Good luck
Click to expand...
Click to collapse
Hehe, it is just okay...
When I flashed the CM9 to it, I got the kernel panic uploade mode... So my guess is still NAND/eMMC fault...
Strange one. It seems like a hardware fault. Good luck with repairing that. Usually a motherboard replacement would be the way to go.
Can you check if you're able to get into stock recovery after flashing a stock ROM?
I have had similar problems on both SGS2 and on Gtab 8.9 after performing factory reset in latest CWM. The only solution was flashing a stock ROM and then factory reset from stock recovery (and then flashing whatever ROM I wanted to flash in the first place)
Could be worth trying.
podumal said:
Can you check if you're able to get into stock recovery after flashing a stock ROM?
I have had similar problems on both SGS2 and on Gtab 8.9 after performing factory reset in latest CWM. The only solution was flashing a stock ROM and then factory reset from stock recovery (and then flashing whatever ROM I wanted to flash in the first place)
Could be worth trying.
Click to expand...
Click to collapse
It was a HW failure... I got it fixed under warranty, and they changed the PCB... Way more simple than changing the eMMC...
Best regards
bored_stupid said:
As Mistahbungle said," CM9 Resurrection is flashed via Odin in download mode ".
And CM9 Resurrection is here flashable via Odin
Hope you know what your doing.
Click to expand...
Click to collapse
Had the same problem, stuck in logo. I tried flashing stock ROM, but it didn't save my situation. So I tried flashing CM9 Resurrection and managed to get into recovery mode. Then I reflashed the custom ROM I had earlier on and everything went up again. Thanks a lot.
same issue
I am also stuck at Samsung logo, i9100
I can get into recovery. I installed stock many times - no help. (I9100XWMS1_I9100XXMS4_I9100NEELS1_HOME.tar.md5)
I was missing my IMEI so I guess it is the efs folder fault.
I tried to fix the efs with backups, I have zipped EFS, but I can not go to system and replace the files.
If you have any ideas - please share it with me!
I also had a nandroid backup - no help as well.
my sgs2 is softbricked and I have download AND recovery mode, and still can't fix it ;(
did you try this guide?
forum.xda-developers.com/galaxy-s2/help/guide-26-12-flash-stock-firmware-rom-t2365701
I tried to flash Devils kernel but got stuck in Odin 3.04 at NAND Write Start.
its been that way for at least 15 minutes now. What do I do? Do I disconnect and try to flash another kernel or what? From posts I've read it looks like I've bricked my S3. What do you guys suggest?
Melhisedek said:
I tried to flash Devils kernel but got stuck in Odin 3.04 at NAND Write Start.
its been that way for at least 15 minutes now. What do I do? Do I disconnect and try to flash another kernel or what? From posts I've read it looks like I've bricked my S3. What do you guys suggest?
Click to expand...
Click to collapse
can enter recovery mode? if yes, put the devl kernel.zip on the sd card and flash it from the recovery. by the way which rom are you using?
Looks like I was lucky this time. I pulled the cable and tried to restart the phone. It restarted without problems. Afterwards I entered recovery mode and flashed the kernel. Works without a problem now
I think it never really started updating. Anyway I'm happy
good! so you need to wait before posting a query hurrily cool
also put "solved" in the title.
sent from my GS3 running PARDUS ROM XXUFME7
Stuck @ Nand Write
sriram231092 said:
can enter recovery mode? if yes, put the devl kernel.zip on the sd card and flash it from the recovery. by the way which rom are you using?
Click to expand...
Click to collapse
I have the same problem.
But i can only get in download mode?
Can i use the Gs3 toolkit to mount the partition?
No, you have a completely different problem from the thread you hijacked.
Hello all. I have a new ace 3 LTE S7275R. I tried installing CWM recovery found here:
http://www.teamandroid.com/2013/12/...7275r-clockworkmod-6-recovery-complete-guide/
I tried with odin 3.07 and 1.85
Every time, odin shows success, but when trying to boot into recovery, the phone gets stuck at "recovery booting...."
The phone is otherwise working
Any help getting CWM to work? Or alternatively, how can I return to stock recovery at least?
bump
gsapient said:
Hello all. I have a new ace 3 LTE S7275R. I tried installing CWM recovery found here:
http://www.teamandroid.com/2013/12/...7275r-clockworkmod-6-recovery-complete-guide/
I tried with odin 3.07 and 1.85
Every time, odin shows success, but when trying to boot into recovery, the phone gets stuck at "recovery booting...."
The phone is otherwise working
Any help getting CWM to work? Or alternatively, how can I return to stock recovery at least?
Click to expand...
Click to collapse
Same problem here bro.
I knew i should've not trusted this webistes...
Im stuck at 'recovery booting' too ..
recovery booting solution
Tre91 said:
Same problem here bro.
I knew i should've not trusted this webistes...
Im stuck at 'recovery booting' too ..
Click to expand...
Click to collapse
people did you know that if you flash original OS for s7275r like mine you can escape from the terrors of the bootloop or whatever you call it? Download it from samsung-updates.com and flash with odin in download mode. Its a bit tricky to get to the download mode, but if u take the power in and out a few times and then proceed to enter download mode it should not be prob.
:laugh:
joshualimshouyan said:
people did you know that if you flash original OS for s7275r like mine you can escape from the terrors of the bootloop or whatever you call it? Download it from samsung-updates.com and flash with odin in download mode. Its a bit tricky to get to the download mode, but if u take the power in and out a few times and then proceed to enter download mode it should not be prob.
:laugh:
Click to expand...
Click to collapse
The brother is right.
I did the same thing and got myself back to stock firmware and recovery.
Guess we have to wait for the official image from clockworkmod themselves.
Hey guys, i was running the latest version of Slim Kat rom for my i9100 when it turned off and then was stuck on samsumg boot logo. When i try to access twrp it just says teamwin and wont go any further. It happened once before and so i just flashed a stock rom and then went back to rooting it. However, now when i try to flash any rom (stock/custom), or another recovery with odin it freezes at "nand write start". I have access to download mode which is really the only thing i have working atm
Ive read around and done everything (eg try other usb ports/cables/odin version) but no luck. Is there anything else i could do? I dont wanna do a pit flash cause im scared ill completely screw it up.
Any help would be appreciated, thanks
px326 said:
Hey guys, i was running the latest version of Slim Kat rom for my i9100 when it turned off and then was stuck on samsumg boot logo. When i try to access twrp it just says teamwin and wont go any further. It happened once before and so i just flashed a stock rom and then went back to rooting it. However, now when i try to flash any rom (stock/custom), or another recovery with odin it freezes at "nand write start". I have access to download mode which is really the only thing i have working atm
Ive read around and done everything (eg try other usb ports/cables/odin version) but no luck. Is there anything else i could do? I dont wanna do a pit flash cause im scared ill completely screw it up.
Any help would be appreciated, thanks
Click to expand...
Click to collapse
Try installing the stock kernel and then try using odin.in download mode,try installing cwm recovery image using odin
sabeeh102 said:
Try installing the stock kernel and then try using odin.in download mode,try installing cwm recovery image using odin
Click to expand...
Click to collapse
no luck Still gives me the same error
Hi i was trying to flash cwm but now when i boot my phone all i see is samsung galaxy note 3 and on the top left it says :
Recovery booting...
recovery is not seandroid enforcing
set warranty bit:recovery
It just keeps rebooting i took out the battery and it still does this! I cant get into download mode or anything please help.
I used the odin root file (like a re-root) to fix this when it happened to me
Yep me too
More details like android version...the recovery filename would help. As others have stated, try flashing the cf-autoroot file for the SM-N900P
My guess is that your recovery isnt there. This happened to me once and I fixed it by reflashing TWRP thru Odin
Sent from my SM-N900P using Tapatalk
jpeery88 said:
I used the odin root file (like a re-root) to fix this when it happened to me
Click to expand...
Click to collapse
Where exactly did you find the odin root file? My phone works perfectly but I can't get into recovery mode to flash any other ROM. Thanks in advance.
mdj8606 said:
Where exactly did you find the odin root file? My phone works perfectly but I can't get into recovery mode to flash any other ROM. Thanks in advance.
Click to expand...
Click to collapse
No such thing as a odin root file, jpeery88 is correct just didn't say it quite right. First odin is software used to install (flash) rom and recovery (files) into your device (phone). ROMS are stock or custom and rooted. You need to get into download mode to install a custom recovery first before you can flash a custom rom. Click on ROM flashing basics in my signature for more info on how to get into download and recovery modes, root your device and more . . .
jimzweb1 said:
No such thing as a odin root file, jpeery88 is correct just didn't say it quite right. First odin is software used to install (flash) rom and recovery (files) into your device (phone). ROMS are stock or custom and rooted. You need to get into download mode to install a custom recovery first before you can flash a custom rom. Click on ROM flashing basics in my signature for more info on how to get into download and recovery modes, root your device and more . . .
Click to expand...
Click to collapse
I have a similar problem. N900p with android 5.0 wont go into recovery or download modes. It displays the message and restarts, repeating the process
nanatheo said:
I have a similar problem. N900p with android 5.0 wont go into recovery or download modes. It displays the message and restarts, repeating the process
Click to expand...
Click to collapse
This was normally a job for a USB jig. I've not found anything for a note 3 though. You might take the battery out over night and try again.
Maybe with the sd card out as well.
Finally I think I've read an attempt with battery out but plugged into power.
after that its punt and buy a "new to you" one on ebay; they're like $140 now a days.