In my experience they are great! Slight extra grip, very scratch resistant. and no bulk.
I highly suggest this if you want the look of a neat case and scratch guard, but it DOES NOT protect if you drop your phone.
I cleaned my phone well with Rubbing alcohol & a cotton pad to get any oils, dirt, or fingerprints off.
The material they use is a high quality slightly textured vinyl, it is very very sticky so try to line it up the best you can before pressing it down, start at one end and be sure to keep all air bubbles out.
the downside is when i was peeling the back off to realign. It pulled some of the paint off the backing of my phone. it was already worn out, i doubt it would happen if you had a clean scratch/chip free phone.
They also come with a neat matching background that lines up pretty well with the front cover, I only have it on the lockscreen due to the homescreen having the "panoramic/wide view"
The way its cut out, you have to line it up just right or the corners will have bumps, and you could easily cover a front button/power button/headphone jack.
Pics are of my phone with my Skinguardz with black/pink Skulls & Diamonds print.
The following will run through the experience of the installation process and comparison with EXiM PET dry install screen protectors and Wrapsol Wet apply body protection.
(Reportedly, Zagg is also similar to Skinomi)
Type:
Installation: WET
Light Permeability: High (ultra clear, glossy)
Prior to Installation:
The protector material is packaged in a tube. Opening the package cap reveals a rolled up screen protector, an instruction guide, squeegee and spray solution. The protector was unrolled and flattened for several days prior to installation.
Installation:
bathroom was steamed up to settle the dust, the screen was cleaned with a mircofibre cloth dipped in 99% Isopropyl.
Compressed air was used to blast off any dust particles on the screen
The protector material was peeled and sprayed with solution
The protector material is elastic / stretchy.
-If my experience with Wrapsol's body protection material that was also stretchy is any indication, caution must be used during installation to avoid accidental excessive stretching which caused permanent deformation of the material. Once the material is over stretched, the holes, edges, etc will be unaligned, rendering the protector useless.
-There is no stretchiness with EXiM PET or any dry install screen protectors
Installation took a few tries before perfect alignment was achieved.
-on several occasions when I tried to realign one part of the screen protector (hoping the rest of the material would follow as with ridged dry PET protectors), the material would instead stretch, so I had to lift the whole screen protector for alignment to avoid stretching and deformation.
After alignment, I used a micro cloth to push all the solution (which is hopefully demineralized to prevent electrical conductivity)
-a micro cloth was used instead of the squeegee provided to minimize damage to the overly soft protector material.
-the material is dentable even with mere accidental stab of a finger nail (not so with ridged dry install PET protectors).
I noticed it's almost impossible to see remaining dust specs due to under lying liquid solution, so you'll just have to hope you did a good job of cleaning prior to installation
First day of application:
-Foggy screen (reportedly disappears after a few days)
-Dented protector (the material is too soft and is pretty much useless to protect itself) (unless this characteristic ALSO disappears and becomes hard material in a few days..., can't recommend)
Second day:
-Majority of the fogginess from the microbubbles have disappeared, a minority of it remains, ~2% of the screen
-material remains soft and malleable
-one dust spec found
Fourth Day:
-Several dents on the screen protector remain from the installation process and more will come from even the slightest impact of a pointy object.
-This material is simply too soft. It is a poor choice of material if longevity is the aim of the protector.
-all microbubbles disappeared
--------------------------------------------------------------------------
This stuff is a joke.
the EXiM PET protectors are half the price and twice the quality.
I used to have a manually modified Apple IPAD EXiM PET protector installed for their lack of the Transformer version available on eBay for $12. Now I can tell the EXiM is definitely better both in installation process and usability.
Light permeability might be a little better with this Skinomi protector as it is thinner than the PET dry install protectors. But I can not be completely sure. I am comparing an old PET installation with weeks of accumulated finger prints and other grime to a brand new installation of Skinomi. So the comparison isn't on equal footing.
PROs:
high light permeability, thin
more Fingerprint resistant (more so than Dry Apply EXiM)
CONs:
difficult installation
-hard to realign (due to stretchiness, requires total lift of material for realignment)
-stretchiness (prone to accidental deformation during installation)
-difficult to see dust specs until a while after installation due to necessary spray solution
poor usability on 1st day post installation (delay in fog dissipation)
poor longevity (soft material very vulnerable to dents and scratches)
-extremely vulnerable to vinegar (cause permanent blur smear)
-extremely vulnerable to isopropyl (cause permanent blur smear)
RECOMMENDED?: No
I just bought my Eee Pad Transformer about two weeks ago and finally got the keyboard dock with it also. I also got this purchase on the Skinomi Screen Protector but has yet to arrive to my doorstep but thank you for the review. I'll see if I want to to test this on my Eee pad Transformer.
Thanks again for a good detailed review.
klau1 sorry if the Skinomi didn't work out for you. The vulnerability to dents is one of the problems I have with it, but I can live with it. Thanks for the review. Oh well if anyone else need a video how-to I have made one below for reference.
http://youtu.be/vWj9Uss65cQ
I would add to the cons... getting the thing off after you've had it on for a few weeks is ridiculous... I thought I was going to break the damn screen. To me that's just unacceptable. I replaced mine because where it touched the dock, the surface marred... agreed that this is crap.
I did end up buying this one on amazon and am very happy http://www.amazon.com/Transformer-P...1?ie=UTF8&s=electronics&qid=1309202152&sr=8-1
Easy to install, no fingerprints, cuts the glare, and easy to lift up with scotch tape and remove any dust deposited during install.. and it's not that expensive.
lopan said:
I would add to the cons... getting the thing off after you've had it on for a few weeks is ridiculous... I thought I was going to break the damn screen. To me that's just unacceptable. I replaced mine because where it touched the dock, the surface marred... agreed that this is crap.
I did end up buying this one on amazon and am very happy http://www.amazon.com/Transformer-P...1?ie=UTF8&s=electronics&qid=1309202152&sr=8-1
Easy to install, no fingerprints, cuts the glare, and easy to lift up with scotch tape and remove any dust deposited during install.. and it's not that expensive.
Click to expand...
Click to collapse
Usually Matte ones that cut glare, also cut contrast or clarity. How does the picture quality compare with the Skinomi ?
lopan said:
I would add to the cons... getting the thing off after you've had it on for a few weeks is ridiculous... I thought I was going to break the damn screen. To me that's just unacceptable. I replaced mine because where it touched the dock, the surface marred... agreed that this is crap.
Click to expand...
Click to collapse
Did you try to put a mild soap solution on the protector before removing it? It might help get it back to becoming more flexible.
klau1 said:
Usually Matte ones that cut glare, also cut contrast or clarity. How does the picture quality compare with the Skinomi ?
Click to expand...
Click to collapse
I have one of these from posr.us. Really does cut on the glare, but is not very smooth on the fingers and also reduces clarity/contrast like you mentioned.
I think I am still going to try the skinomi.
THIS SH*T IS A JOKE and SCAM!!!
Use a bit of rubbing alcohol or 99% isopropyl and it blurs over.
There is now a blotch of blurriness on the spot I briefly rubbed with the alcohol and quickly stopped.
DO NOT BUY!
klau1 said:
THIS SH*T IS A JOKE and SCAM!!!
Use a bit of rubbing alcohol or 99% isopropyl and it blurs over.
There is now a blotch of blurriness on the spot I briefly rubbed with the alcohol and quickly stopped.
Click to expand...
Click to collapse
This also happened to me - don't use anything other than a mild vinegar solution to clean the screen w/ this protector on it or else you'll get this blur/white patch effect - it ruins the entire screen protector.
Great review, thanks lots of useful information.
I got the silver carbon fiber back from skinomi and I love it. It makes the back of the TF look so cool. I only installed the back because I didn't like the pieces for the side and stuff. I kept the screen protector for future use because I got a SGP anti-glare protector which I love also. The finger prints just disappear, well almost lol.
I couldn't disagree more with this review. My skinomi went on without any problems and looks great, can't even tell there is a protector on it.
How on earth do you get 'dents' on it during installation is beyond me......did you put it on with a knife and fork? There are many reviews and installation videos showing how easy it is and how good the skinomi looks when installed properly.
klau1 said:
THIS SH*T IS A JOKE and SCAM!!!
Use a bit of rubbing alcohol or 99% isopropyl and it blurs over.
There is now a blotch of blurriness on the spot I briefly rubbed with the alcohol and quickly stopped.
DO NOT BUY!
Click to expand...
Click to collapse
UPDATE:
CAUTION
ANOTHER Blur smear created by SubWay's (TM) Sweat Onion Chicken Terriakyi sub.
I was eating a sub when I accidentally made contact between the sub and the skinomi protector screen, some "sweet onion sauce" was smeared on the screen, when I wiped it with a napkin, ANOTHER blur was left behind just like with the isopropyl.
so even light vinegar will ruin this piece of crap.
I got the Skinomi for its full body skin... of course im already using something else as a screen protector...
thanks for the update!
would love to read anyone else's reviews on this product!
Added:
After weeks of usage, it's proven to be:
Pro:
more Fingerprint resistant (more so than Dry Apply EXiM)
I bought two for my gtab....the first one had a deep scratch in it right out of the box and the second one went on like crap. I also see what appears to be bubbles in the material in spots.
you can pretty much just duplicate this review for the bodyguardz ultra clear screen protector. the same rolled up packaging. the same pain in the ass installation with alignment issues(although this isnt their fault ill admit.) i did the same tactics minus the cleaning with alcohol before hand and after a week I still had these ugly " blotches" on my screen. after a week. emailed bodyguardz and the rep said it was from lack of solution used. thats funny because i used 2 vials of the solution. ( i had one left over from my phone screen protector) anyways, i think im just gonna rock the tab without a screen protector. i have a decent case which it never leaves, i should be good.
while the Zagg is similar in installation i never had any of the problems you had installing it. The zagg doesnt come in a tube its flat out of the box. i Swear by the zagg, i have installed it on 4 iphones , a n1, ipad, Inspire 4g and now my transformer. while the zagg stretches ever so slightly you shouldnt be pushing so hard on it with the squeegee thiers is a rubber squeegee and works great. The Zagg also allows alot of light to come through and seems almost as good screen clarity as if it wasnt on. It cleans easily and resist finger prints, i have never noticed any denting either with the Zagg.
^ if you can confirm that the zagg doesnt have the " orange peel" feel on the transformer screen protector i will order one right now.
Iirc, zagg will yelow over time, and it is thicker so might result in lower light permeability
That is to say, of course it would if you put a big phone like that in the same pocket as keys...
Good review, though. There seems to be no set standard for battery life to reviewers.
http://www.techradar.com/us/reviews/phones/mobile-phones/htc-one-1131862/review/1#articleContent
This is just totally idiotic.
Keeping the phone in a pocket with other metal objects and it getting scuffed is not a surprise.
Durr... metal scratches metal and plastic, not glass though. Of course his keys scratched the metal back.
Hello Android fans,
I'm a new user to the Samsung Galaxy Tab 2 10.1 from T-Mobile (SGH-T779), and I wanted to discuss my case and screen protectors of choice I like.
First of all, my screen protector of choice in most cases is usually Zagg's invisibleShield, because it works REALLY well, most of the time. I say most of the time for reasons not related to this situation. I have a Galaxy Note 2 as well with a wallet case that presses against the screen, Zagg's plastic technology doesn't work so well for it in that kind of situation.
Otherwise, my Tab 2 has a nice wet-applied Zagg invisibleShield HD screen on it, and it's plain awesome. There's no quality loss in the screen, it doesn't scratch very easily and doesn't collect a whole lot of fingerprints. It does collect them, but easily wiped off with a simple cloth.
My case I'm using, though it's not /perfect/, it's just currently the best I could personally find at the time.
It's the RooCase RC-GALX10TAB2-DA-BK Dual-Axis leather folio case. Basically it works using a 2-piece assembly. The main part holds the case in a nice felt-feeling case, so you can hold it, without the outer case, in a night light package. The outer case has velcro to hold the inner part to it so you can rotate it by sticking it to the velcro. This allows it to be in landscape or portrait mode very nicely, and it doesn't fall over when in portrait mode like a lot of the other dual-axis folios seem to have a problem with. It does use a low-powered magnet on the front of the inner case to the outer inner case so it snugs together when closed.
The only downsides are, so far:
The stylus/pen holder is on the outside edge of the outer case, so it sticks out like a soar thumb, and can easily be knocked out.
The case has no hole on the bottom side for the 30-pin connector, though this issue can be kind of gotten around by simply rotating the tablet to its side, or completely upside down, thanks to full auto-rotation of the Android interface. I usually plug it in every night in this manner, rotated out to put the 30-pin on the outer side and plugged in.
It is "technically" leather, but it seems like every other "Genuine Leather" product out there, where the leather is just a very very thin layer of leather covered over cardboard or other fillers. (I make leather stuff as a hobby, so I know what real leather is capable of and feels like when done properly).
The plus sides are:
It fits rather well and does not interfere with the touchable screen area, even with my big hands I have yet to conflict with the edges of the touchable screen. .
It fits very snug and tightly, so it doesn't move at all.
It fully exposes the power, volume rocker, microSD slot, IrDA port, and headset port, and covers most of the SIM card, so it helps prevent loss of the SIM card in case it ever popped open and somehow snapped out.
Anyway, that's my review, hope it's helpful to people.
Psi-Jack
Just in case anyone is thinking to remove the inner screen protector on their Find N2 (fold) - don't.
I am crying for days now after removing it, and I hope I can at least save the heart ache to other people.
The screen didn't break or anything, but two things happened:
1) Unlike the front screen, the glass surface under the inner screen is not very smooth. My fingers glide easily on the front screen with its protector removed, but there is some resistance on the naked inner screen; not as "oily". This is the smaller problem.
2) The crease is now VERY visible. What I didn't realize is that the original screen protector is a little matte, and it makes a great job deflecting lights reflections on both sides of the crease. With it removed, the surface is more glossy, and some light always finds its way to the crease, making it visible. If I look at the screen tilted away from me, I don't see it as much. But that's not a natural way of holding the screen.
Please think twice before removing it.
If there is someone who already removed it, and found a good aftermarket protector to apply, please share your experience.
I feel bad for you bud.. I haven't thought about removing mine but appreciate the heads up bro!