My stock battery is showing maximum of 1200mAh.
I would like to know how do I calibrate battery to go back to 1650mAh?
What's the correct procedure for doing this?
Thanks!
If u r using battery monitor widget for this u need to set the battery capacity yourself . 1200 is just the default value. U need to change it to 1650 in the settings
Sent from my GT-I9100 using Tapatalk
Oh, ok thanks. Didn't notice that. How can I check if my battery is 100% as it should be?
Souldat said:
Oh, ok thanks. Didn't notice that. How can I check if my battery is 100% as it should be?
Click to expand...
Click to collapse
when fully charged the voltage shud be just a lil bit over 4200mV
Related
Where does the phone get the battery temperature? Is the sensor in the phone or battery? Is it actually battery temp or CPU temp?
tdamocles said:
Where does the phone get the battery temperature? Is the sensor in the phone or battery? Is it actually battery temp or CPU temp?
Click to expand...
Click to collapse
I'm pretty sure it's the battery. All phones out have a temp monitor on the battery for safety purposes I'm pretty sure.
BravoMotorola said:
I'm pretty sure it's the battery. All phones out have a temp monitor on the battery for safety purposes I'm pretty sure.
Click to expand...
Click to collapse
Since you think it's battery temp, where is that sensor located?
I purchased the 2200mah battery that is found on ebay and I noticed that the temp is rock solid between 24-26C. With the OEM it would fluctuate between 24-37C. Is the OEM battery defective?
nope, the oem battery is ok. I had it at 57C
tell me plz, what is the real capasity of 2200? is it same as original battery? or much less?
p.s. the sensor is inside the battery.
agurzhiy said:
nope, the oem battery is ok. I had it at 57C
tell me plz, what is the real capasity of 2200? is it same as original battery? or much less?
p.s. the sensor is inside the battery.
Click to expand...
Click to collapse
Seems like it drains a little quicker than the stocker. I need to use it a little longer to see. I'm guessing the temp reading is probably suspect.
agurzhiy said:
nope, the oem battery is ok. I had it at 57C.
Click to expand...
Click to collapse
Wow! That's crazy.
Recently I've installed the BatteryCalibration 'cause my phone doesn't turn on for a long time after installed CyanogenMod. After the installation of this app, I saw the mV level on this app, and my maximum always appears 3 or 4 mV.
Looking at the Google, various cellphones with Android, be they Android 2.2 or Android 2.3, have the 1000+ mV, and my aparell doesn't have this, have 3 mV.
It's normal? My battery lasts only four or five hours totaly, it's not use, it's use more sleep time.
PS: If I change the battery, my mV grows?
This is an bug in Ace, it doesn't shows right mV for the battery, you can find the right value in /sys/bus/platform/devices/msm-battery/power_supply/battery/voltage_now and it isn't an effect of battery calibration.
You can see the real voltage typing *#0228#
Sent from my GT-S5830 using Tapatalk
mastermid said:
You can see the real voltage typing *#0228#
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
Err... Doesn't demostre the real voltage...
brunogdb said:
Err... Doesn't demostre the real voltage...
Click to expand...
Click to collapse
type *#*#0228#*#* and you will get all important values...check it out now!!!
Real battery voltages should appear as 4200mv charged. Ace is screwed up at that by showing 4.
Also the Ace can't display accurate battery percentage, hence the big percentage jumps.
consegregate said:
Real battery voltages should appear as 4200mv charged. Ace is screwed up at that by showing 4.
Also the Ace can't display accurate battery percentage, hence the big percentage jumps.
Click to expand...
Click to collapse
It can't display, but, sometimes this percentages are real. :/
(first of all i want say my english very bad )
İ charge battery all night, yes (%100), and i did wipe battery stats ,and again battery charge 30min,after i did battery calibrate,i use just five 5 minute (internet with 2g), after batery lose % 82 yeah certainly real ,
30.min battery charge %80
1.hour %60 ...
3 or 3.30.hour %5
(just internet 2g and 3-5 message ) that is normal ?
what can i do? i did wrong battery calibration or something else?
i used task killer ,not working
set cpu ,not working
power max pro ,not working
i used this all but not save my battery
sorry my english.
Buy a new battery
Sent from my G2X using XDA Premium App
Which rom are u using??
Sent from my GT-S5670 using xda premium
Have you do battery calibration right?
Use your ace until the battery getting low, then wipe battery stats, and use your ace until it turns off by its self. Finally, charge your phone (power off) 'til full. Do it twice.
I recommend you to use battery calibration app. Get it in market.
Sent from my GT-S5830 using Tapatalk
madhops15 said:
Buy a new battery
Sent from my G2X using XDA Premium App
Click to expand...
Click to collapse
i bought 1 month ago this battery 1350mah, actually not bought, i want guaranty , again i want new battery or buy?
merdogmus said:
(first of all i want say my english very bad )
İ charge battery all night, yes (%100), and i did wipe battery stats ,and again battery charge 30min,after i did battery calibrate,i use just five 5 minute (internet with 2g), after batery lose % 82 yeah certainly real ,
30.min battery charge %80
1.hour %60 ...
3 or 3.30.hour %5
(just internet 2g and 3-5 message ) that is normal ?
what can i do? i did wrong battery calibration or something else?
i used task killer ,not working
set cpu ,not working
power max pro ,not working
i used this all but not save my battery
Some ROMs did cause serious battery drainage problem. Use some other ROM i suggest.
Click to expand...
Click to collapse
droidxpert said:
Which rom are u using??
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
İ use omega rom by TeamCooper 2.3.6
sodaks said:
merdogmus said:
(first of all i want say my english very bad )
İ charge battery all night, yes (%100), and i did wipe battery stats ,and again battery charge 30min,after i did battery calibrate,i use just five 5 minute (internet with 2g), after batery lose % 82 yeah certainly real ,
30.min battery charge %80
1.hour %60 ...
3 or 3.30.hour %5
(just internet 2g and 3-5 message ) that is normal ?
what can i do? i did wrong battery calibration or something else?
i used task killer ,not working
set cpu ,not working
power max pro ,not working
i used this all but not save my battery
Some ROMs did cause serious battery drainage problem. Use some other ROM i suggest.
Click to expand...
Click to collapse
not diffrent other rom , same battery sucker
Click to expand...
Click to collapse
hallidafykzir said:
Have you do battery calibration right?
Use your ace until the battery getting low, then wipe battery stats, and use your ace until it turns off by its self. Finally, charge your phone (power off) 'til full. Do it twice.
I recommend you to use battery calibration app. Get it in market.
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
actually, i did exactly what you said dude
merdogmus said:
actually, i did exactly what you said dude
Click to expand...
Click to collapse
Then try flashing stock rom. If the problem still persist, I guess there's something wrong with the battery. Buy a new battery, or if you're not sure just bring your ace to Samsung Service Centre and let them see the problem.
Sent from my GT-S5830 using Tapatalk
hallidafykzir said:
Then try flashing stock rom. If the problem still persist, I guess there's something wrong with the battery. Buy a new battery, or if you're not sure just bring your ace to Samsung Service Centre and let them see the problem.
Sent from my GT-S5830 using Tapatalk
Click to expand...
Click to collapse
Ok. I will try stock rom but i dont think so
Hi
I have rooted my phone and installed CM11 Nightly + Kitkat on my Xperia P. I noticed all the times Screen consuming 50% of battery and due to this my battery is getting drained quickly and its not lasting for atleast a day.. Can someone help me to fix this issue and use my mobile normal?
karthick.k11 said:
Hi
I have rooted my phone and installed CM11 Nightly + Kitkat on my Xperia P. I noticed all the times Screen consuming 50% of battery and due to this my battery is getting drained quickly and its not lasting for atleast a day.. Can someone help me to fix this issue and use my mobile normal?
Click to expand...
Click to collapse
Hey, did you remember to calibrate your battery after flashing the ROM?
Also it's pretty normal that the screen consumes a lot of battery. But if it isn't on for long periods of time and still drains there's something wrong.
You can check what is waking your device using this app
Another suggestion would be that don't use auto brightness, it drains the battery quite a bit.
Aniruddha10 said:
Hey, did you remember to calibrate your battery after flashing the ROM?
Also it's pretty normal that the screen consumes a lot of battery. But if it isn't on for long periods of time and still drains there's something wrong.
You can check what is waking your device using this app
Another suggestion would be that don't use auto brightness, it drains the battery quite a bit.
Click to expand...
Click to collapse
Yes I did callibrate my battery but not sure whether i did correct. Can you let me know how to calibrate my battery?
Let me try with that wakelockdetector apps.. I didnt use the auto brightness... even i tried reducing the brightness to 0% but no luck....
karthick.k11 said:
Yes I did callibrate my battery but not sure whether i did correct. Can you let me know how to calibrate my battery?
Let me try with that wakelockdetector apps.. I didnt use the auto brightness... even i tried reducing the brightness to 0% but no luck....
Click to expand...
Click to collapse
Well you probably did it correctly, not that complicated. Use the calibration app
I got it from this XDA thread and it always seems to work for me.
Just make sure to charge to 100%, unplug the charger and then press calibrate.
Anyway leave the wakelockdetector running for a day or so and then see what is waking your device the most.
Also check what governors and io schedulers you are using. That can make quite a difference.
Aniruddha10 said:
Well you probably did it correctly, not that complicated. Use the calibration app
I got it from this XDA thread and it always seems to work for me.
Just make sure to charge to 100%, unplug the charger and then press calibrate.
Anyway leave the wakelockdetector running for a day or so and then see what is waking your device the most.
Also check what governors and io schedulers you are using. That can make quite a difference.
Click to expand...
Click to collapse
Thanks. Let me try with thie Calibrator apps and check with wakelockdetector as well... Can you let me know which governor is best for battery and performance?
karthick.k11 said:
Thanks. Let me try with thie Calibrator apps and check with wakelockdetector as well... Can you let me know which governor is best for battery and performance?
Click to expand...
Click to collapse
It's hard to say which is best. You'll have to test them to suit your own needs.
Try using hotplug or smartassV2. They have a nice balance between battery and performance.
Currently I'm using hotplug, I find it has better battery and the performance is sufficient.
If you want more info on governors look in this thread.
karthick.k11 said:
Hi
I have rooted my phone and installed CM11 Nightly + Kitkat on my Xperia P. I noticed all the times Screen consuming 50% of battery and due to this my battery is getting drained quickly and its not lasting for atleast a day.. Can someone help me to fix this issue and use my mobile normal?
Click to expand...
Click to collapse
What brightness level do you use, and what is your screen on time?
Hello and sorry for bothering,does anyone know how to change battery capacity ?
Thank You.
Er, change the battery to one with more capacity or one with less...
Not that I would do that...
Sent from my Galaxy Tab S5e using XDA Labs
guhvanoh said:
Er, change the battery to one with more capacity or one with less...
Not that I would do that...
Click to expand...
Click to collapse
Currently im using modified battery (asus zenfone 4 max battery) its working but it still say 4000mah
Sorry broken english
rockz98 said:
Currently im using modified battery (asus zenfone 4 max battery) its working but it still say 4000mah
Sorry broken english
Click to expand...
Click to collapse
So that's a 5000mah battery?
You've done well to fit it in the battery bay!
I'm curious
Do you think it's using the extra capacity?
So is it using 0-5000, or maybe it's charging to 5000 then discharging to 1000 and shutting down
Or maybe it only charges to 4000?
If it's not indicating the charge level accurately I'd naively assume you'd need to use a custom kernel, though I'm out of my depth in terms of which could help
You're probably best to leave well alone and just blindly enjoy the extra capacity!
thesoupthief said:
So that's a 5000mah battery?
You've done well to fit it in the battery bay!
I'm curious
Do you think it's using the extra capacity?
So is it using 0-5000, or maybe it's charging to 5000 then discharging to 1000 and shutting down
Or maybe it only charges to 4000?
If it's not indicating the charge level accurately I'd naively assume you'd need to use a custom kernel, though I'm out of my depth in terms of which could help
You're probably best to leave well alone and just blindly enjoy the extra capacity!
Click to expand...
Click to collapse
It only charge up to 4000mah , that's what i thought at first n need to find kernel that working with this ?????
Are you only modified battery cell? In battery have little pcb I think. I think thats read battery capacity
Alvian_P said:
Are you only modified battery cell? In battery have little pcb I think. I think thats read battery capacity
Click to expand...
Click to collapse
Yeah,i think i want to going back to 4000mah
Rockz98 , did you direct install in the Asus battery to poco?