i installed wolfbreak rom v54 on my x10, everything works fine except battery drianage and hot. i then installed v6 update, now it doesnt hot anymore but wifi is not working and i cannot check my account balance, i says USSD CODE RUNNING and vanishes. pls what am i gonna fix this.
ahmmyreal said:
i installed wolfbreak rom v54 on my x10, everything works fine except battery drianage and hot. i then installed v6 update, now it doesnt hot anymore but wifi is not working and i cannot check my account balance, i says USSD CODE RUNNING and vanishes. pls what am i gonna fix this.
Click to expand...
Click to collapse
please, flash stock ROM, then with flashtool, make root, and xRecovery, flash baseband .58 (it's the better for me) and theflash wolf's ROm and then the v6 patch, that should work...
yea I feel your pain...did a whole fresh install with seus and reinstalled fresh market apps but still ended up with FCs for everything i pressed on. so I went back to freex10
re-flash offical 2.1 stock
hey try wiping battery stats a couple times in xrec, it should help a bit.
Hi all...
I just got my first Android phone... is an X10i...
I have version 2.1-update1 on it, and i tried 2 custom roms (2.2) with the install from SDcard.
After installing first rom (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip) the result you can see it here: 220.ro/documentare/MOV01113/AVtgAccdjh/
After this, i instaled the 2nd rom (FreeX10-beta4.zip + gapps_FreeX10.zip); the result was: it work perfectly but after 30 seconds it was rebooting. it never stops.. the phone start again, and after 30 seconds , again reboot... and so on.
I must mention that the phone is SIM locked, and to work in my network i must unlock it... can this be a problem? if not can any one help me to fix this?
Or can anyone tell me where to find a custom rom that can be flashed with x10flasher? because when i install the rom from SDcard, is loading normally untill 50%, but when it reach 50%, he instantly go to 100%
Some info about my phone:
model: x10i
firmware: 2.1-update1
baseband: 2.1.54
kernel: 2.6.29
Can anyone tell me what is the problem and advice me what to do?
Thanks in advance.
SE-X10i said:
Hi all...
I just got my first Android phone... is an X10i...
I have version 2.1-update1 on it, and i tried 2 custom roms (2.2) with the install from SDcard.
After installing first rom (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip) the result you can see it here: 220.ro/documentare/MOV01113/AVtgAccdjh/
After this, i instaled the 2nd rom (FreeX10-beta4.zip + gapps_FreeX10.zip); the result was: it work perfectly but after 30 seconds it was rebooting. it never stops.. the phone start again, and after 30 seconds , again reboot... and so on.
I must mention that the phone is SIM locked, and to work in my network i must unlock it... can this be a problem? if not can any one help me to fix this?
Or can anyone tell me where to find a custom rom that can be flashed with x10flasher? because when i install the rom from SDcard, is loading normally untill 50%, but when it reach 50%, he instantly go to 100%
Some info about my phone:
model: x10i
firmware: 2.1-update1
baseband: 2.1.54
kernel: 2.6.29
Can anyone tell me what is the problem and advice me what to do?
Thanks in advance.
Click to expand...
Click to collapse
For now you can only flash stock 2.1 roms using the flashtool, everything else you have to use xrecovery.
As far as your phone being sim locked, I really don't think that's related to any of the issues you've mentioned.
Here's what I suggest:
- use the flashtool to flash it back to stock 2.1
- root
- install xrecovery
- try Wolfbreak's custom 2.2 rom from here
http://forum.xda-developers.com/showthread.php?t=945264
the instructions on the first post are kinda confusing but let me know if you have any other questions. Make sure to use the thanks button if any of this helps.
To install custom ROMs, your phone needs to be rooted and then install the ROMs via xrecovery.
Also for Trip's Froyo or Gingerbread ROM, it is preferable to on bb49..
GUIDES:
For changing BB: http://forum.xda-developers.com/showthread.php?t=960527
For Trip's 2.2 ROM: http://forum.xda-developers.com/showthread.php?t=1013210
Instruction for Flashtool : http://forum.xda-developers.com/showthread.php?t=928343
thanks to both for fast answer...
***********************************
@Lockon Stratos
this rom is working good, is only rom that installs properly and work without reboot, but SDcard is not working, and when i applyed the hotfix, it enter into a reboot loop
@regencyhood
i tried MIUI... same problem... reboot loop
***********************************
i tried again all roms that i have downloaded until now from here, but unsuccessfully
I do not understand why, but ROMs are not installed correctly (i have root and xrecovery installed, i made factory restore, wipe cache, format cache, wipe dalvik cache).
so i think i will stay on 2.1
I was very enthusiastic when i got it, but i see that is not such a great phone with no official update for 2.2, and is low on internal memory (only 465MB data memory and 280MB RAM).
SE-X10i said:
thanks to both for fast answer...
***********************************
@Lockon Stratos
this rom is working good, is only rom that installs properly and work without reboot, but SDcard is not working, and when i applyed the hotfix, it enter into a reboot loop
@regencyhood
i tried MIUI... same problem... reboot loop
***********************************
i tried again all roms that i have downloaded until now from here, but unsuccessfully
I do not understand why, but ROMs are not installed correctly (i have root and xrecovery installed, i made factory restore, wipe cache, format cache, wipe dalvik cache).
so i think i will stay on 2.1
I was very enthusiastic when i got it, but i see that is not such a great phone with no official update for 2.2, and is low on internal memory (only 465MB data memory and 280MB RAM).
Click to expand...
Click to collapse
Reason for Reboot on MIUI is because you are on baseband 54 (i.e 2.1.54)....
Recommended baseband is 49, either you flash and change your bb or you can apply a patch... all the necessary help regarding bb is given in the link in my above post...
hope i was helpful
So which one do you want to use trip's froyo or Z's froyo? I hate to say this but I have a feeling it's something you're doing in between installs that could be causing the problem. I say pick one that you want to use/test, flash back to stock 2.1 using je flashtool, root, install xrecovery then flash just one of the custom froyo roms using xrecovery.
Sent from my X10i using XDA App
Patch BB 54 or rollback BB 52
Lockon Stratos said:
So which one do you want to use trip's froyo or Z's froyo? I hate to say this but I have a feeling it's something you're doing in between installs that could be causing the problem. I say pick one that you want to use/test, flash back to stock 2.1 using je flashtool, root, install xrecovery then flash just one of the custom froyo roms using xrecovery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
what i want is a version of froyo that look like official one...
something like the ROM from TripNRaVeR (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip)
sorry for the link from my first post... i hope this is working : youtube.com/watch?v=iV408mrlWqA
this is how is working the Rom from TripNRaVeR (Froyo_2.2.1_xperia_TripNRaVeR-v1.0.zip) on my phone
edited:
regencyhood said:
Reason for Reboot on MIUI is because you are on baseband 54 (i.e 2.1.54)....
Recommended baseband is 49, either you flash and change your bb or you can apply a patch... all the necessary help regarding bb is given in the link in my above post...
hope i was helpful
Click to expand...
Click to collapse
so... if i downgrade baseband to 2.1.49, the rom from TripNRaVeR will work to?
and i want to know if appeared any fix for camera for the rom from TripNRaVeR?
so... if i downgrade baseband to 2.1.49, the rom from TripNRaVeR will work to?
and i want to know if appeared any fix for camera for the rom from TripNRaVeR?[/QUOTE]
Yes, it will work.
Regarding the camera I am using "TripNMiUI FINAL 1.0.63" ROM, and the camera is working a-OK. (Pic and Vid included)
Zoom results in FC for me in the stock and MIUI camera app, because of which I use Vignette....
Was adding another post, but thought it was not helpful..now i dont know how to delete a post
I cannot believe this! Ive tried like everything to make this work, I cannot stand out that ppl has custom kernel with deep sleep, while Im in a stoneage or similiar.
My problem is that me screen freezes in different places all the time, sometimes the screen goes black, sometimes at lockscreen, sometimes I can enter the menu and yea so on. The phone is being freezed for like 10 minutes and then restarts over again.
This is how I did. To make sure nothing has been wrong I went back to generic stock rom. Flashed bb 52 (have tried 49 also), installed my rom (WB's rom) through recovery, and after I installed the bb patch. No problem YET, baseband showed 52 and got signal.
Installed the k12 through xrecovery and also the two fixes wifi_bt_fix-fxk_froyo_v01.1 and wifi_driver_k012_uc and booted the phone, and here I am.
Do you see anything I have done wrong?
I have been able to load custom kernel, but with a rom that had custom kernel implented.
Couldn't some1 combine WB's rom with custom kernel?
Edit.....
Therr is a guide on installing custom kernel further on in this section .
Good luck
Kieron
Sent from my X10i using XDA App
Freak174 said:
I cannot believe this! Ive tried like everything to make this work, I cannot stand out that ppl has custom kernel with deep sleep, while Im in a stoneage or similiar.
My problem is that me screen freezes in different places all the time, sometimes the screen goes black, sometimes at lockscreen, sometimes I can enter the menu and yea so on. The phone is being freezed for like 10 minutes and then restarts over again.
This is how I did. To make sure nothing has been wrong I went back to generic stock rom. Flashed bb 52 (have tried 49 also), installed my rom (WB's rom) through recovery, and after I installed the bb patch. No problem YET, baseband showed 52 and got signal.
Installed the k12 through xrecovery and also the two fixes wifi_bt_fix-fxk_froyo_v01.1 and wifi_driver_k012_uc and booted the phone, and here I am.
Do you see anything I have done wrong?
I have been able to load custom kernel, but with a rom that had custom kernel implented.
Couldn't some1 combine WB's rom with custom kernel?
Click to expand...
Click to collapse
the random crashes and reboots is known issue on k12..
please refer here.. it may help
Hey guys,
I hope you can help me.
Today I flashed the boot.img and wifi.ko of FreeKernel mod 3.50 and got a lot of WLODs and restarts. Before I was on mod 3.47 which was super stable.
Then I put the boot.img and wifi.ko from mod3.47 back, now it doesn't WLOD anymore but reboots quite often.
How can I fix it? Can't restore my xRec backup of "system" with FreeXperia Recovery and don't want to reflash.
What to do?
Thanks
Fixed it by restoring the system partition from an older backup and installing kernel mod3.47 again.
Hopefully my X10 is stable again.
Thread can be closed.
It didn't fix it.
Why isn't it stable anymore?
I used the kernel for 1 week without problems and now it doesn't work stable anymore.
Did I mess up my X10/CPU with overclocking it to 1.113GHz?
Sent from my X10i using XDA Premium App
Now I used a system backup from a 100% stable configuration without any custom kernel and restored "system", but it still reboots sometimes.
Has my X10 the motherboard problem?
Worked almost 8 months perfectly.
Dear colleagues.
I´m having the same problem that has been haunting me on several customs ROMs (Zdzihu´s CM7, and Violence´s CM7) and now on Wolf´s V6. I´m on Doomkernel 04b.
It´s the reboots. With light usage, everything goes perfectly, but with heavier usage (Poweramp+ Internet Browser+3G or GPS+3G) the system reboots . I don´t know if this is normal. I´m using smartass V2 with 245-998. I also have reboots even without using setcpu. So I guess the problem isn´t setcpu.
Every time I do flash a new ROM. I always do a fresh install (full wipe). So I guess the solution isn´t fresh install.
I want to make it clear that this is not ROM related. The ROM is fantastic.
Could someone please help me?
ru on unlocked bootloader..if yes try using dooms version5 with the smartass v2 governor and 245-1152mhz and see if the reboots still occur..or try for th kernel with same settings !! if on locked BL then better go for ondemand governor!!