I'm using roam control 1.6, i press roam, i turned off the roaming guards and set the roaming to automatic in the settings, but it refuses to roam. The phone also doesnt roam when theres 0 bars, and there is verizon coverage here. It supposedly works on htc phones without root, but it doesnt work rooted or unrooted
I am using Roam Control 1.6.2 on a fully stock Evo 3D and it works. I get the roaming triangle when I use the Roam button.
O
6foot7foot said:
I'm using roam control 1.6, i press roam, i turned off the roaming guards and set the roaming to automatic in the settings, but it refuses to roam. The phone also doesnt roam when theres 0 bars, and there is verizon coverage here. It supposedly works on htc phones without root, but it doesnt work rooted or unrooted
Click to expand...
Click to collapse
Working perfect for me. Using a sticky root, but I don't think it is needed. Thank god becouse my sprint signal strength sucks with this phone.
Don't select auto mode in the phone settings after you select roam in the app. Maybe that is causing a problem.
Stock rom and working without a problem
Sent from my PG86100 using XDA Premium App
6foot7foot said:
I'm using roam control 1.6, i press roam, i turned off the roaming guards and set the roaming to automatic in the settings, but it refuses to roam. The phone also doesnt roam when theres 0 bars, and there is verizon coverage here. It supposedly works on htc phones without root, but it doesnt work rooted or unrooted
Click to expand...
Click to collapse
Sounds like an issue with the app. I would contact the app maker.
Works for me as well.
Sent from my PG86100 using XDA Premium App
6foot7foot said:
I'm using roam control 1.6, i press roam, i turned off the roaming guards and set the roaming to automatic in the settings, but it refuses to roam. The phone also doesnt roam when theres 0 bars, and there is verizon coverage here. It supposedly works on htc phones without root, but it doesnt work rooted or unrooted
Click to expand...
Click to collapse
Sent you a PM, thanks.
I just bought it so I could test it out, I hadn't heard about it before.
jnewkirk10 said:
Works for me as well.
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
are you using temp root? or no root? thanks!
Works great for me, never a problem.
Sent from my 3vo using XDA App
Does not require root... Works great
Sent from my PG86100 using XDA App
Works for me, but it kill root after I run it. It's been updated twice since I had that problem though so I think that was fixed.
Mike
Related
I wanna save battery by using 3G only but everytime i put it into CDMA PRL auto mode it just shuts off my internet... i live near dallas, any ideas?
Nikolai2.1 said:
I wanna save battery by using 3G only but everytime i put it into CDMA PRL auto mode it just shuts off my internet... i live near dallas, any ideas?
Click to expand...
Click to collapse
3g is evdo
Sent from my ADR6400L using XDA App
No if you put it in evdo mode you don't get phone calls. Plus I tried and no 3g
Sent from my ADR6400L using XDA Premium App
Nikolai2.1 said:
No if you put it in evdo mode you don't get phone calls. Plus I tried and no 3g
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
hmm well that's what I'm using right now and I just got a phone call.
Sent from my ADR6400L using XDA App
Nikolai2.1 said:
I wanna save battery by using 3G only but everytime i put it into CDMA PRL auto mode it just shuts off my internet... i live near dallas, any ideas?
Click to expand...
Click to collapse
Cdma prl auto works fine for me.
Sent from my ADR6400L using XDA App
Just to be perfectly clear, CDMA PRL Auto is the proper mode to switch to.
Sent from my ADR6400L using Tapatalk
jeffnucci said:
Just to be perfectly clear, CDMA PRL Auto is the proper mode to switch to.
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
That's what I'm saying. But mine just shuts off signal if LTE isn't on fo some reason
Sent from my ADR6400L using XDA Premium App
I get no internet on cdma auto either. Even after a reboot. Ping says network unreachable.
Sadface.
Dallas/Richardson area here, having the same problem. Data only working on 4G, nothing on evdo/1x.
Same here on two Thunderbolts in Los Angeles. I actually haven't seen 3G at all since Friday night. Called Verizon and apparently there is an issue with 3G provisioning. They claim they are working on it and that there will be a fix in the next day. I know others say they fixed it with a hard reset but I don't want to do that if I don't have to, especially if its just going to break again later...
xtermmin said:
Dallas/Richardson area here
Click to expand...
Click to collapse
same here plano/richardson
good i think that means the phone isnt broken!
/me tazers Verizon
Hey guys I had the same issue in Baltimore, MD area and for me I had to factory reset and the 3g is now working when using cdma auto and its been running for about an hour now
Sent from my ADR6400L using XDA App
Weird. Mine never had that problem.
Did a factory reset now (since I hardly customized my phone yet), and it seems to have fixed the 3G problem. Not only that, but now I have the updated market! (Before the reset, I had the old market)
Go to the market and download Restart Connections. If you lose mobile network after switching to the proper setting, run that app.
Edit: This will also get rid of the need to do a factory reset to regain data connection
xtermmin said:
Did a factory reset now , and it seems to have fixed the 3G problem.
Click to expand...
Click to collapse
ltbakken said:
Go to the market and download Restart Connections.
Click to expand...
Click to collapse
neither of these fix it for me. as far as i can tell there is no 3g for TB in dallas.
only 4g and wifi get internet access.
rizzomegav said:
neither of these fix it for me. as far as i can tell there is no 3g for TB in dallas.
only 4g and wifi get internet access.
Click to expand...
Click to collapse
it worked for me after a while. i turned it on outside my house and it worked, but for some reason my home wouldnt let me switch
Had a similar issue. Figured out that when I switch from LTE to CDMA (PRL) it will switch to 3g, it can take a while, however if I power off the phone it will not connect on reboot to 3g again have to switch back to LTE and go to 4g and then switch back again. Hope this helps
3g just started working and i did nothing (other than going without internet for hours until it started working).
im blaming Verizon and my local network.
cant get internet to work. 4G, wifi works but not 3G and i cant call to have it worked on cause its my only phone...
anyone experience this?
Go into wireless &networks & switch to 2G
Sent from my rooted myTouch 3G Slide using XDA App
bhargrove06 said:
Go into wireless &networks & switch to 2G
Sent from my rooted myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
This is cdma not gsm. You need to update your profile in system updates. Then dial *17
Sent from my PG06100 using Tapatalk
chesarae.garza said:
cant get internet to work. 4G, wifi works but not 3G and i cant call to have it worked on cause its my only phone...
anyone experience this?
Click to expand...
Click to collapse
I had this issue when I first got my OG evo, I called in and they walked through altering some settings, took me some time arguing with them but it worked
Every time I try to make a call I get that, and my signal shows no bars with a X is there a setting I have to change to get my network back? using Cm7
*#*#4636#*#*
Change your setting to CDMA auto in the phone information menu.
Sent from my MoPho. All typos are the phones fault.
Jo_795 said:
Every time I try to make a call I get that, and my signal shows no bars with a X is there a setting I have to change to get my network back? using Cm7
Click to expand...
Click to collapse
If your rooted use roam control.
I have two bars intill I answer the phone. Then Click. Great signal roaming.
Sent from my MB855 using xda premium
Do you think that the APN settings might have something to do with it? Maybe you will wana look into that
rbeavers said:
If your rooted use roam control.
I have two bars intill I answer the phone. Then Click. Great signal roaming.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Can you post a link to this? I looked on the market and can't find it
Sent from my MB855 using XDA App
Has anyone figured out how to force Roaming yet??
Sent from my EVO using Tapatalk 2
Try Roam Control. You can force the phone to roam, stay in the home network, or manage it automatically (like normal).
It works on my LTE.
Link: Roam Control
Look under development forum it is a main post...searching helps should see it in 2 seconds there is a flashable zip too...enjoy!
Sent from my EVO using XDA
There is another thread.
*#*#4636#*#*
Then Phone Information
Menu>Select Radio Band>Cellular(800-MHz Band)
That cuts out any PCS roaming if you do that. Roam control is so much easier with just a widget on the screen.
Sent from my C64 w/Epyx FastLoad cartridge
+1 Roam Control
Sent from my EVO LTE using Tapatalk 2
Roam control doesn't seem to work for me on the stock Rom rooted. when I select roam only all it does is disconnect the cell radio for 30 seconds... then it reconnects to a non roaming signal. settings are set to allow roaming voice and data and setting under mobile networks is set to auto (not sprint only).
I am on PRL 25004.
ShadowDrake said:
Roam control doesn't seem to work for me on the stock Rom rooted. when I select roam only all it does is disconnect the cell radio for 30 seconds... then it reconnects to a non roaming signal. settings are set to allow roaming voice and data and setting under mobile networks is set to auto (not sprint only).
I am on PRL 25004.
Click to expand...
Click to collapse
Have you set it to HTC?
Sent from my EVO LTE using Tapatalk 2
crzycrkr said:
Have you set it to HTC?
Sent from my EVO LTE using Tapatalk 2
Click to expand...
Click to collapse
Yes - it forces you to. And HTC auto phone detection is turned on.
ShadowDrake said:
Yes - it forces you to. And HTC auto phone detection is turned on.
Click to expand...
Click to collapse
Weird, I'm using it with no problems whatsoever.
Sent from my EVO LTE using Tapatalk 2
The stock prl probably doesn't have 3g roaming . Idk if the 3g roaming prl's will work with the evo lte Bc of the svdo. Someone needs to put one on their phone and try it out.
Sent from my SPH-D710 using xda premium
There is a thread in development, you can use the corporate prl or Verizon and get 3g the newest corporate I think is 11119
Sent from my GT-I9300 using Tapatalk 2
Roam control works just fine here as well.
Sent from my C64 w/Epyx FastLoad cartridge
dtr145r said:
The stock prl probably doesn't have 3g roaming . Idk if the 3g roaming prl's will work with the evo lte Bc of the svdo. Someone needs to put one on their phone and try it out.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
You misread. my phone doesn't roam at all.
Another bump with another question. My phone will roam if I select 800 MHz from *#*#info#*#* ... I suspect that by selecting a band I disabled automatic selection of the other bands. is there any way to reset that info without having to do a hard reset?
Or what's the way to reset all radio and provisioning information?
ShadowDrake said:
Another bump with another question. My phone will roam if I select 800 MHz from *#*#info#*#* ... I suspect that by selecting a band I disabled automatic selection of the other bands. is there any way to reset that info without having to do a hard reset?
Or what's the way to reset all radio and provisioning information?
Click to expand...
Click to collapse
Crap...that screwed up my phone as well. I was wondering why I wasn't roaming. Not sure how to flip it back to all bands.....arghhhhh.
Sent from my C64 w/Epyx FastLoad cartridge
digiblur said:
Crap...that screwed up my phone as well. I was wondering why I wasn't roaming. Not sure how to flip it back to all bands.....arghhhhh.
Sent from my C64 w/Epyx FastLoad cartridge
Click to expand...
Click to collapse
I think if you dial that code again then go to same screen and select sprintpcs and it will be back to normal.
That isn't an option.
Sent from my EVO using Tapatalk 2
digiblur said:
That isn't an option.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I haven't found a solution to this one yet. Contemplating doing a hard reset today to see if my phone will start to roam again. No shortage of places around here to have it automatically switch over.
ShadowDrake said:
I haven't found a solution to this one yet. Contemplating doing a hard reset today to see if my phone will start to roam again. No shortage of places around here to have it automatically switch over.
Click to expand...
Click to collapse
I did a hard reset and reprovision and it fixed it.
For some reason i could connect to LTE for about 30 seconds before my phone would revert to 3G. no matter how many times i updated prl or profile.
Solution: used Network from app store to switch from CDMA+LTE AUTO to LTE,CDMA. now getting lightning fast LTE all the time.
Nice.
I was having the same problem, could you explain what you did exactly? There is an app called network that allows you to change this?
Sent from my EVO using xda app-developers app
tomplatz said:
Solution: used Network from app store to switch from CDMA+LTE AUTO to LTE,CDMA. now getting lightning fast LTE all the time.
Click to expand...
Click to collapse
Which "Network" app did you use? Play Store shows like 19,000 apps when I search on just "network"!
Thanks!
Dave
'Network' on AppBrain: http://www.appbrain.com/app/de.mangelow.network
I'll try this out, I've been dialing *#*#4636#*#* and selecting lte/cdma, this may make it easier to switch
Sent from my EVO using Tapatalk 2
Just remember...the resets when you reboot and keeps your phone from connecting to ehrpd (i think)
Still running tests
Sent from my EVO using xda app-developers app
Working good for me as soon as i changed the settings.... Been on lte since then without getting on 3g.... This is good...
Thanks
Sent from my EVO using xda app-developers app
00mred00 said:
Just remember...the resets when you reboot and keeps your phone from connecting to ehrpd (i think)
Still running tests
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Whats ehrpd ?
Sent from my EVO using xda app-developers app
App works well, good shortcut..
I just have to set it back to cdma, lte+evdo/auto when I leave an lte area.. Then 3g/4g/1x hand offs appears to function normally..
Lte+cdma lets me maintain 4g down to 1 bar otherwise it drops down to 3g for no reason I can tell..
metallized said:
Whats ehrpd ?
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
Enhanced High Rate Packet Data (eHRPD). eHRPD is an enhancement of 1xEV-DO (AKA HRPD) that enables LTE to CDMA handover.
00mred00, do you know a way around this problem? I'm just not getting LTE if I don't change my network like this. Seems odd that we should have to do this at all. Is this a problem of the freshROM or a coverage problem or what?
Thanks for the intel.
It happens because sprint has flipped the switch early and less than half of lte towers are on and are still not fully powered up. The 3g signal is stronger (although slower) than the 4g.. Sprint has said that there lte isn't fully functional and that it's currently mostly for outdoor use
jshow816 said:
It happens because sprint has flipped the switch early and less than half of lte towers are on and are still not fully powered up. The 3g signal is stronger (although slower) than the 4g.. Sprint has said that there lte isn't fully fictional and that it's currently mostly for outdoor use
Click to expand...
Click to collapse
I will have to try this next week when I am in an area supposedly with LTE on but it's not accessible
Yes! This works! I was having the same issue and sprint stores and tech support could never help! This definitely is the fix. Makes me so angry that it is just a setting on the phone. The people at the Sprint stores were insisting that there was nothing wrong. Dirty liars.
Sent from my EVO LTE using xda app-developers app
jshow816 said:
It happens because sprint has flipped the switch early and less than half of lte towers are on and are still not fully powered up. The 3g signal is stronger (although slower) than the 4g.. Sprint has said that there lte isn't fully functional and that it's currently mostly for outdoor use
Click to expand...
Click to collapse
This is pretty much what I have found here in Dallas. I am not convinced we we need a permanent solution for this reason.
For example...the areas I have to do this in are not officially up and running yet. (keep in mind not all of the "orange" is officially up yet either)
I continue to test it. Right now I want to say Atlanta is the furthest in completion
Sent from my EVO using xda app-developers app