Hello All,
i tried to install SBF ATT-2.3.4_Pudding_preroot and i get a Booting loop with the Motorola logo.
before the instillation i had a Unlocked, rooted Android 2.3.4FR version with CherryBlur 1.4D.
what i did is perform a full format of the phone with factory reset and full wipe (thru the recovery). now i get this boot looping and i dont have the recovery (i get "!" sign with Android icon.
PLEASE HELP !!!
Sounds like you have stock recovery. Did you try the lower right corner of the screen with the !, or might have to hit Vol up and vol down at the same time if you were on 2.3.4.. Hope this helps..
OK .. we have some progress
I did what you told me to, and i manage to arrive to the Android system recovery <3e>, ( Android system recovery utility).
and i have the following options :
1. Reboot system now
2. apply update from sdcard
3. wipe data/factory reset
4. wipe cache partition
what I need to choose ?
morfiux said:
I did what you told me to, and i manage to arrive to the Android system recovery <3e>, ( Android system recovery utility).
and i have the following options :
1. Reboot system now
2. apply update from sdcard
3. wipe data/factory reset
4. wipe cache partition
what I need to choose ?
Click to expand...
Click to collapse
Hmm.. If you flash Tenfars port of CWM, and then install a CWM Rom?
which Rom I need to install
i have the RSD protocol ( and i able to flesh from the RSD lite).
so which Rom I need to install ?
Problem Solved !!!
YEAH !!!!
i was able to solve the problem by using this post
http://forum.xda-developers.com/showthread.php?t=1163342
and use the following commands :
Use the following commands to flash the images:
moto-fastboot flash boot boot.img
Use the following commands to wipe data and reboot:
moto-fastboot -w
moto-fastboot reboot
boot.img
- morfiux,
i'm in the same boat as you i think...
where did you get your boot.img ?
I'm gonna try what you tried and hope i have my atrix back
EDIT :: NEVERMIND :: I'm an idiot...
Related
So I wanted to try loading this ROM.
http://forum.xda-developers.com/showthread.php?t=1206767
It said to use the new ext4 file system rom I had to flash the update (rather than just use the internal app update option) which I did using moto-fastboot. Then I tried to reboot the phone into recovery and it just freezes on the load screen. The old CWM boot method was almost instant and I've waited for about a minute (I'm not that impatient.)
Tried to boot into android recovery through the boot menu (just to see what it did, I try not to screw with things I don't know about.) It said "magic mode mismatch" so could that have anything to do with anything?
Does anyone know what I'm doing wrong?
What is the air-speed velocity of an unladen swallow?
Thanks
Use RomRacers latest CWM and reflash Beta.zip...
i try it too but it dont pass the motorola boot do u think is because cwm?
Yes.. it is most likely because of the CWM you are using...
Go HERE and download the latest ROMRacer CWM
Boot into fastboot
Code:
moto-fastboot devices
moto-fastboot erase recovery
moto-fastboot flash recovery recovery-atrix4.1.img
moto-fastboot reboot
Reboot into recovery on reboot and re-flash your Beta.zip for CM7 using RomRacer's CWM and the steps in the CM7 thread. And enjoy CM7... Hope this helps
Still freezes :/
Also I'm not using CM7, I'm using the ROM from the thread I posted, not that it should matter since I can't even get into CWM to load the ROM to begin with. It just freezes at the start screen. Then I have to remove the battery to get it to reboot back into the phone.
some times after a session useing a custom webtop when it wont reboot so i pull tge battery for a wile and then it does also more on this subject when this happens i cant get into the wipe dalvik cash screen idk why after it boots up all the way though i can wipe it all just fine??any ideas
us-alienv4UL /OC1.3V2.0{webtop2sd(fixed}CWM5.0.2.3atrix4.1
I got a problem whit my sgs+. It doesnt go anywheare from cwm 5.504. I tried to install CyanogenMod 9 and it actually installed but when i reboot it does the reboot and comes back to CWM. I followed thease intructions:
Installation:
Back up your apps with TitaniumBackup. Backup your SMS with SMS Backup & Restore and your call logs with Call log Backup & Restore. Export your contacts to a .vcf file.
First a special version of CWM recovery is needed, FeaMod does not work because it does not set partition sizes for CyanogenMod 9 correctly. The new recovery can restore FeaMod Recovery backups in case you want to return to one later. There are many ways how to install the recovery, choose one:
Flash CWM5504-CM9-recovery.zip inside FeaMod (boot into recovery, apply update from sdcard) or stock recovery
or use Quickflasher from broodplank:
Connect phone via USB, start sgsflasher_x86.exe, activate "Flash a new Recovery", select the recovery.img and press "Start Now".
or use Odin to flash recovery-clockwork-5.5.0.4-ariesve.tar.md5 as One Package using the regular AriesVE.ops (Tutorial)
or flash recovery.img using the command line/adb by putting it on your sdcard and executing the commands:
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p13
CyanogenMod9 comes as a zip that is installed inside recovery. Download cm-9-20121023-EXPERIMENTAL-ariesve-beta3.zip and put it on your sdcard.
Reboot into CWM Recovery
Perform a backup!
Wipe data/factory reset
Wipe Cache partition
Advanced > Wipe dalvik cache
Install zip from sdcard (choose cm-9-20121023-EXPERIMENTAL-ariesve-beta3.zip)
.........................................................................................
So the .zip file seesms to install but my phone doesnt open up whit cyancolen or the stock rom... In the recowery menus i can do anythin i want but i think i dont do the righy things so could someone help me?
thanks
Try clearing cache and dslvik cache in recovery and then reboot. . .
Sent from my Apple IIe
Hi, finlandpetu, I've had the same Problem, and I think you have to flash a new Bootloader. Look at this Thread. :good:
lecter100 said:
Hi, finlandpetu, I've had the same Problem, and I think you have to flash a new Bootloader. Look at this Thread. :good:
Click to expand...
Click to collapse
had the same problem and this helped
I do not know if there is a similar post like this but I had to post..i just installed ViperX+ rom to my international HTC one x+..everything seemed ok after installation but when i sweeped to unlock the phone,HTC's logo appears on the screen and i can't do anything about it..any ideas?
Thanks in advance and sorry if this question is reposted..
smavr said:
I do not know if there is a similar post like this but I had to post..i just installed ViperX+ rom to my international HTC one x+..everything seemed ok after installation but when i sweeped to unlock the phone,HTC's logo appears on the screen and i can't do anything about it..any ideas?
Thanks in advance and sorry if this question is reposted..
Click to expand...
Click to collapse
i know this problem and it is easy to fix.
the problem: your recovery does not work fine, it does not wipe completely
you need to flash PhilZ Touch Recovery from: http://forum.xda-developers.com/showthread.php?t=2617901
after flashing reboot into recovery:
then
1. delete all userdata, wipe data/ factory reset
2. "..." wiping cache partition
3."..." wiping dalvik cache
4. and finally wipe to install a new custom rom
so... after that you only have to flash your "old" recovery of previously, then flash again the boot.img of your rom using fastboot (don`t forget erasing cache after flashing) or using venom flasher to flash the boot.img
..
reboot into recovery
..
last step: install the rom-zip from your sdcard or with adb sideload ....... and everything will work perfectly. :victory:
have fun
regards
-appyleptiker
appyleptiker said:
i know this problem and it is easy to fix.
the problem: your recovery does not work fine, it does not wipe completely
you need to flash PhilZ Touch Recovery from: http://forum.xda-developers.com/showthread.php?t=2617901
after flashing reboot into recovery:
then
1. delete all userdata, wipe data/ factory reset
2. "..." wiping cache partition
3."..." wiping dalvik cache
4. and finally wipe to install a new custom rom
so... after that you only have to flash your "old" recovery of previously, then flash again the boot.img of your rom using fastboot (don`t forget erasing cache after flashing) or using venom flasher to flash the boot.img
..
reboot into recovery
..
last step: install the rom-zip from your sdcard or with adb sideload ....... and everything will work perfectly. :victory:
have fun
regards
-appyleptiker
Click to expand...
Click to collapse
Thanks a lot Thread can be locked now
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
D03035790 said:
I don't understand what is it that I might be doing wrong, I root the tablet, have bootloader unlocked, and install Dualrecovery. From TWRP recovery I wipe Dalvik cache, Cache, System, and Data. Install PAC Rom Castor and GApps using TWRP, all seems to go well, no errors present themselves. Then I reflash "TabZ2-lockeddualrecovery2.8.21-RELEASE.flashable" to keep the recovery intact before I attempt to boot into system per their instructions after installing a custom ROM. I wiped Dalvik and Cache before I reboot and once it goes away from recovery nothing occurs just my tablet remaining in flash boot which is a good thing so I can start all over again since obviously something went wrong and just use flashtools to get back to an old stock firmware. I have a SGP512. Any help is appreciated, thanks.
Edit: Even tried it w/o wiping system and same results just doesn't boot.
Click to expand...
Click to collapse
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
rcstar6696 said:
Your device will never Boot if you flash pac with nuts recovery. It causes to much Problems with cm based roms. So to rescue your tab you need Boot into fastboot and write "fastboot erase recovery" then flash this kernel http://doomlord.xperia-files.com/do...2U3RrS2VybmVsX1dJRkktdjAzXzE3LjEuMS5BLjAuNDAy
Do not reboot to system. Power of the device and then Boot into recovery (when you see the Sony logo and the LED light turns pink/amber/orange keep tapping/pressing VOLUME UP key). Then you will See cwm recovery. There first do a factory reset and Format system. Format system is in mounts and storage options) now flash PAC Rom and gapps and reboot to system now the device should Boot correctly. After the first boot do all settings then go to developer options and you will find expand reboot menu or something Luke this. Tick it and than hold the power button for some second tap reboot than bootloader (before connect the device with your PC) than use fastboot to flash the New recovery. Use one of these http://forum.xda-developers.com/xpe...wrp-cwm-philz-recovery-collection-z2-t3052676
For instructions to flash recovery look in the thread there are a step "Installation" if you need more help write me
Click to expand...
Click to collapse
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
D03035790 said:
Thanks! I used Flashtools to flash over the recovery via fastboot and accessed the recovery to do the rest. I had no idea CM based ROMS don't work well that recovery or any other I haven't tried yet. Any suggestion on what recovery to use? So far CWM got me this far not sure if I should try others. Philz Touch seems to be more appealing and the same as CWM.
Click to expand...
Click to collapse
Use this one https://mega.nz/#!rI4y2bJS!VksDLNy_a8cy8x-VBviYRkTP2SdSBm7Rs9G445vUXCU
This is twrp but it works with cmbased roms.
I have an ICOO D70G2 7" tablet that will not boot. Any assistance with finding an img file for this device and instructions on how to flash the ROM would be much appreciated. The recovery screen has only the following:
Recovery Mode
Fastboot Mode
Normal
If I go into recovery, I get the following options.
reboot system now
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
I have both Win10 and Win7 for doing the flash.