I know i asked this few places but mostly getting ignored.
Anyone know if it is possible to go back to 2.1.55 baseband for rogers if i did the 2.3.3 gingerbread manually?
I don't want to stay on 2.1.71 if possible because i am not getting 3g any longer.
thank you.
shameless bump, i want to know, i can not use 3g anymore defeat the whole purpose of update to 2.3.3
I'm using Rogers x10a, and installed the 2.3.3 (non-rooted version).
My baseband is 2.1.71 and I'm getting 3G without any issues.
have you confirmed your settings in:
Settings -> Wireless & Network Settings -> Mobile networks -> Network Mode
Mine is set to: GSM/WCDMA preferred.
Also for Network Operators. Mine gives me the choice of:
Rogers 2G
Rogers 3G
Bell 3G
and some weird one called 30220 3G.
So make sure you have Rogers 3G selected.
You need to input the apns . I'm On rogers too and it all works after I did this.
Go here
http://www.nexusoneforum.net/forum/rogers-discussion/3987-rogers-wireless-apn-settings-data-mms-here.html
Then go to access point names in your mobile network settings, and add a new apn for data and mms. Copy what he has exactly and presto! Your done.
Just one APN does the trick. I copied what my x10a had before updating to 2.3 x10i
APN
Name: Rogers Internet
APN: rogers-core-appl1.apn
MMSC: http ://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
(everything else is blank)
I thank you for all your reply, i seem to able to get it after i enter the apn as told, thank you so much.
P,S: never mind..after i put it got 3g but it put me on a reboot cycle ...
3g seem to put a lot stress on gingerbread on my x10.
Been using Wolf's for 4 days now on my Rogers X10a on the Rogers network in Toronto with ZERO issues.
Restore the APN: http://pastebin.com/jNse0tpf
wish i can say the same.
But after 2.1 update and a little later my phone started to restarting.
issue: http://talk.sonyericsson.com/message/24287
i already gave up the x10, 2.3.3 make it worse instant boot out as soon i enter "home page"
and worse is, i can't use PC companion now since it say "you have the latest update".
I am done with this piece of crap.
wrongfeifong said:
wish i can say the same.
But after 2.1 update and a little later my phone started to restarting.
issue: http://talk.sonyericsson.com/message/24287
i already gave up the x10, 2.3.3 make it worse instant boot out as soon i enter "home page"
and worse is, i can't use PC companion now since it say "you have the latest update".
I am done with this piece of crap.
Click to expand...
Click to collapse
hey I have the same problem as you. Rogers x10a using any 2.3 rom causes a crash/boot loop
You can go to this thread: http://talk.sonyericsson.com/message/59415 and download the ftf file and flash it to your phone with http://forum.xda-developers.com/showthread.php?t=920746 and then update your phone with SEUS
You should be back to Rogers branded firmware and if you're still under warranty you may be able to get an exchange or repair or something.
This thread: http://forum.xda-developers.com/showthread.php?t=801892 Seems to imply that our phones have a motherboard problem due to faulty soldering or misplaced insides.
Good luck to you.
Just repair the phone with PC Companion or reflash with the Flash Tool or xRecovery to see if the issue is still present.
Did you use the pre-rooted ROM? If so, did you follow ALL the instructions (factory reset, wipe cache, etc.) because not doing it may result in the problem you are having.
Also, there's no way to go from 2.3.3 to 2.1 with SEUS. You have to use the FlashTool.
Related
Debranded as per method on xperiax10.net blog - replacing the 2 files repair in SEUS downloads to re flash phone at last min and letting it install generic then ran update again to get 026 [orange still on 020]
Problem now is ive lost data connection. Guessing i need the orange UK APN settings? Phone is on a contract with data included
There is no APNs listed at all in the phone
lol sorry its all good reset to default settings and t searched and found orage mms and oragegrpsweb 3g icon appeared seems all good
at what exact point of the download did you replace the files, was it 147 meg or 146...? I cannot for the life of me get this method to work anymore
We'll I've got an unrooted X10i on Orange UK, these are my APN Settings, hope they help:
Name: Orange Internet
APN: orangeinternet
MCC: 234
MNC:33
APN type: default,supl
Everything else inbetween is
Sent from my X10i using XDA App
Replaced it on the last 2mg on seus didnt work with companion. The file it was dl was 140 the one I put was 120 but it still said it was 140 whn I copied it after install ran seus and finnialky got 026 update.
Sent from my X10i using XDA App
After rooting my phone I couldnt access my data because my phone went from x10a to x10i!
Ive searched all around for tutorials on how to go back but most are outdated and omnius now requires money to buy a license. Please does anyone know of a free way to go back to x10a?
corruptedlolz88 said:
After rooting my phone I couldnt access my data because my phone went from x10a to x10i!
Ive searched all around for tutorials on how to go back but most are outdated and omnius now requires money to buy a license. Please does anyone know of a free way to go back to x10a?
Click to expand...
Click to collapse
Rooting should not have changed your phone to 10i, even so should still have access to data. Have you backed up?
If needed look through dev thread for flash tool, there are several 10a flashs availabile, also SEUS repair.
Well I dont know why but it went from x10a to x10i. I followed the tutorial that proyaz made on youtube to go to version R2. Ive looked all over for flash tools and they are all outdated. As for SEUS repair it tells me that my phone doesnt need an update or it cant be repaired because its not recognized. Do you know of any flash tools that are up to date? I have a few different x10a copies on my computer. Just no way of putting it on my phone.
corruptedlolz88 said:
Well I dont know why but it went from x10a to x10i. I followed the tutorial that proyaz made on youtube to go to version R2. Ive looked all over for flash tools and they are all outdated. As for SEUS repair it tells me that my phone doesnt need an update or it cant be repaired because its not recognized. Do you know of any flash tools that are up to date? I have a few different x10a copies on my computer. Just no way of putting it on my phone.
Click to expand...
Click to collapse
You need to enter your APN settings. If you are on AT&T here they are:
Go to Settings -> Wireless Controls -> Mobile Networks-> Access Point Names
Add a new APN. Don’t forget to Save the new APN by pressing the “more” button! Once you do this, you must select the newly created Internet APN.
Lastly, make sure there are no extra spaces after entering any of these values, else your 3G won’t work.
AT&T
<name> att
<apn> wap.cingular
<proxy> wireless.cingular.com
<port> 80
<username> not set
<password> not set
<server> not set
<mmsc> http://mmsc.cingular.com
<mms proxy> wireless.cingular.com
<mms port> 80
<mcc> 310
<mnc> 410
<apn type> not set
THANK YOU!!!
So it doesnt matter that my xperia is an x10i as long as i have that?
corruptedlolz88 said:
THANK YOU!!!
So it doesnt matter that my xperia is an x10i as long as i have that?
Click to expand...
Click to collapse
No, it should not matter. You can flash whatever firmware you like from here if you like. You will find both the X10a and X10i firmwares.
Hi guys, I just bought a HTC Hero off of someone, it has the cyanogenmod 7 on it, and was apparently unlocked. Having an iPhone for, I bought an adapter for microsim to sim, and plopped my simcard in the Hero.
Only issue now is.. No service. if I run through settings and go to network operators, Virgin shows up (Virgin Mobile Canada). So if I select this, it tries to register with Virgin, and then I get the error "Unable to connect to this network at this time, please try again later".
Im new to android, so Im a little lost in how I might go about fixing this issue. Ive tryed checking the APN settings, they appear to be right, this is what I have for them:
BELL
Name: Bell
APN: pda2.bell.ca
MMSC: htt p://mms.bell.ca/mms/wapenc
MMS Proxy: web.wireless.bell.ca
MMS Port: 80
MCC: 302
MNC: 610
APN Type: mms
BELL INTERNET
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MCC: 302
MNC: 610
APN Type: Default
Im curious if those are set up right, and if they may be the issue. Also, could it be an issue with cyanogenmod, or that the phone was not unlocked correctly? If it is cyanogenmod, how might I go about getting the stock OS on the phone again?
Thanks for the help in advance,
the android noob,
Syntackz.
Syntackz said:
Im curious if those are set up right, and if they may be the issue. Also, could it be an issue with cyanogenmod, or that the phone was not unlocked correctly? If it is cyanogenmod, how might I go about getting the stock OS on the phone again?
Thanks for the help in advance,
the android noob,
Syntackz.
Click to expand...
Click to collapse
So you can try to flash another ROM, if you want the stock one you can try VillainROM 13 or the one from elelinux, both of the are tweaked stock versions with Sense UI made by htc...or you can flash a new version of gingerbread...
The problem with the signal can be caused by the sim or by the ROM...try another sim and see how it works, and try to flash another ROM, it's easy to do this
ROMS:
1.Android 2.1 with Sense UI [Elelinux] -> here
2.Android 2.1 with Sense UI [VillainROM] -> here
3.Android 2.3.5 Stock [JiieeHD] - > here
4.Android 2.3.5 [Elelinux] -> here
5.Android 2.2.1 [Erasmux] -> here
Keep me in touch how things go
Stefan
Thanks for the response, Ill try a new rom tonight, im sure its not the sim as it works in the iphone without any issues.
Have to go pick my girlfriend up from work and run some errands and such so I will attempt a new rom tonight.
Chances are I will get stuck trying to install a new rom, this is my first android phone and I bought it with cyanogen already on it, so I have no experience doing that.
Anyways, Ill post back later to let you know how it worked out!
Thanks,
Syntackz.
Syntackz said:
Thanks for the response, Ill try a new rom tonight, im sure its not the sim as it works in the iphone without any issues.
Have to go pick my girlfriend up from work and run some errands and such so I will attempt a new rom tonight.
Chances are I will get stuck trying to install a new rom, this is my first android phone and I bought it with cyanogen already on it, so I have no experience doing that.
Anyways, Ill post back later to let you know how it worked out!
Thanks,
Syntackz.
Click to expand...
Click to collapse
To start flashing a new ROM it's easy , try this -> here, or you can try youtube .
PS: try a sim from another phone, not from your iphone
Stefan
I'm in South Korea, using a sony x10. I wasn't sure if the latest gingerbread update would be released in my region, so I decided to flash the firmware myself to the latest stock gingerbread (2.3.3).
Afterwords I lost 3g access and my carrier says it's my fault or nothing they can do.
Afterwards, I rooted the phone and installed a custom kernel and still it's not available(I figured it was worth a shot).
I can see and select my mobile service provider(Sk telecom) in the list of data service providers, but my phone is not downloading any APN info from my carrier.
Any advice?
Hi,
search for APN information from your provider in the internet and enter them manually.
Somehow my APN got two additional letters and I had no 3G. I corrected the information manually and all is fine now.
Ralf
ryuker said:
I'm in South Korea, using a sony x10. I wasn't sure if the latest gingerbread update would be released in my region, so I decided to flash the firmware myself to the latest stock gingerbread (2.3.3).
Afterwords I lost 3g access and my carrier says it's my fault or nothing they can do.
Afterwards, I rooted the phone and installed a custom kernel and still it's not available(I figured it was worth a shot).
I can see and select my mobile service provider(Sk telecom) in the list of data service providers, but my phone is not downloading any APN info from my carrier.
Any advice?
Click to expand...
Click to collapse
You need to set up your wireless apn go to:
menu/settings/wireless & networks/mobile networks/network mode/gsm/wcdma preferred (click it)
Then Back button/Back button/sony ericsson/settings download then wait a few you will see it (3g/H) flash on (you do not have to click it it's just saying that is your network) then go to:
Back button/wireless & networks/mobile networks/access point name. there should be two apns
one wireless/one mmsc. if for some reason you have three make sure that the top one (the house icon 3g) is checked or you will be roaming
And always remember to backup your Settings and APNs,and anything else you need to keep. There are free apps on the market to do that but the pro/key versions have more settings and help the developers and no adware. Hope this helps if not all be here tomorrow or i'm sure someone else will help too i do have some apns just tell us what network your on an we can help you set them up. Good luck
No APN info shows up at all. If I go to Sk telecom service center, can they give me the info to manually input it?
My network is for SK telecom in South Korea. Any other info you need about the network?
You can try an all see if i can find it. So give me a day and all post it
Sorry no luck that an Three other Country's i can't get for some reason. It's a bummer
Maybe someone else here can help.
I went through and read everything in the Super Thread - twice.
I went through and flashed the stock Rogers ICS 4.0.4 rom to the phone and then rooted it by flashing the cwm kernal in the instructions. My phone is successfully rooted and it is not reverting to the stock android recovery.
I went through and disabled all the Rogers bloatware and restarted the phone and now it isn't enabling itself automatically. Score one for patience and good advice.
I use Petro Canada Mobility pay as you go. They are a reseller of Rogers and the price is right until my ISP launches their wireless service.
I went through and set the phone so that is uses gsm/wcdma bands only - no LTE as it isn't available in my province as of yet. I set up Petro Canada's APN settings and save. I restart the phone and the phone automatically defaults back to Rogers APN settings. The APN that I created is gone - *poof* I can't count how many times in the last 24 hours I have reset this phone
What the heck am I missing here cause I can't figure it out. Why won't it save my APN settings? I got the rest of the kinks worked out and now this??
Do the Bell and Telus versions of this phone have the same quirks cause if they don't, I'll gladly flash their roms.
Help please!
I would leave the network to auto.
When you make an APN and save it, then select it, it disappears?
Can you edit the default Rogers APN?
Is your phone carrier unlocked?
rangercaptain said:
I would leave the network to auto.
When you make an APN and save it, then select it, it disappears?
Can you edit the default Rogers APN?
Is your phone carrier unlocked?
Click to expand...
Click to collapse
When I make an APN and and save it, it is fine until I restart the phone. The minute I restart the APN disappears. I can edit the Rogers APN and save the changes. When I restart, it reverts to it's default settings. It is not carrier unlocked. Because my mobility carrier is a reseller of Rogers, my sim card works with it. There was no need to unlock it.
It seems like you need to unlock it, because you can't use any other carrier's APN, you're locked on Rogers.
Have you rooted it? Since that is the cheaper route, maybe being rooted will let you permanently create the correct APN.
Yes I have it rooted. Still the same issue.
Run a good nandroid backup ....
Then enter the new APN into the device ....
Then delete the old APN , then reboot ...
If the new APN sticks, then run a new backup and delete the old one ...
These devices can be temperamental on occasion ....g
Edit :
And yes ...you may be locked at this point, and stuck on Rogers ...g
I went through and unlocked the phone, stuck in a Bell Sim card and it recognized it right away. I went through completely reset the phone again, entered in my APN settings, and restarted. The settings disappeared. I am told that the Bell, Rogers, and Telus variants are all the same so I am going to flash one of their roms on the phone to see if I have better luck.
Well I flashed a different rom - Bell and that fixed the issue. It was the stock rogers rom that was causing me grief.
So my next question is this - anyone have any ideas on what Rom is better? The Telus or the Bell one?