Are drivers required for Odin flashing ? - Galaxy S II Q&A, Help & Troubleshooting

In order to flash my SGS2 with an KE7 rooted kernel (XWKE7 is the kernel when I purchased my device) I tried to install the drivers for Windows 7.
I have a clean Windows 7 VMware session on my Macbook (I don't have a Windows PC, but everything which works under ̇Windows natively also works in VMware session) , set USB debugging OFF on my Galaxy and plugged it int the USB. Then Windows started with 'Finding device drivers' , but it says 'Mobile MTP device: failed' .
On Mac OSX (10.7) it works normally and Kies connects. Of course, I have connected the USB port to the VMware session when using Windows.
And I installed Kies to enforce device driver installation but that didn't help. Moreover, KIES appeared in RED under W7.
Then I tried again under an XP SP3 VMware session, same issue.
Should I first install the drivers before proceeding to Odin or can I use Odin now ? I am reluctant to try as I am scared for 'partially flashing and bricking' the device.
Of course, I'll close Kies before starting Odin as they don't like each other.
Does somebody have any ideas ?

mermaidkiller said:
In order to flash my SGS2 with an KE7 rooted kernel (XWKE7 is the kernel when I purchased my device) I tried to install the drivers for Windows 7.
I have a clean Windows 7 VMware session on my Macbook (I don't have a Windows PC, but everything which works under ̇Windows natively also works in VMware session) , set USB debugging OFF on my Galaxy and plugged it int the USB. Then Windows started with 'Finding device drivers' , but it says 'Mobile MTP device: failed' .
On Mac OSX (10.7) it works normally and Kies connects. Of course, I have connected the USB port to the VMware session when using Windows.
And I installed Kies to enforce device driver installation but that didn't help. Moreover, KIES appeared in RED under W7.
Then I tried again under an XP SP3 VMware session, same issue.
Should I first install the drivers before proceeding to Odin or can I use Odin now ? I am reluctant to try as I am scared for 'partially flashing and bricking' the device.
Of course, I'll close Kies before starting Odin as they don't like each other.
Does somebody have any ideas ?
Click to expand...
Click to collapse
As far as i know, kies automatically installs the drivers for the SGSii when u install it...
Hmm id just try putting the phone in download mode and plug it into the computer with odin open, if the com7/yellow box shows up in odin id say you are good. If not, then yeah. You are good as long as you don't flash anything , you can just pull the battery from the phone to get out of download mode again WHILE ITS NOT FLASHING anything of course .
Just my 2 cents.

Drivers are always needed, without it how would the phone connect?

Luckily Odin simply will not work without the correct USB drivers .
Usb drivers can be found in the Kies folder in program files .
jje

Thanks. But in that folder C:/Program Files/Samsung/USB Drivers are a lot of numbered / named subfolders.
Which should I choose ?

mermaidkiller said:
Thanks. But in that folder C:/Program Files/Samsung/USB Drivers are a lot of numbered / named subfolders.
Which should I choose ?
Click to expand...
Click to collapse
In KIES folder Install USB driver .
jje

Thanks, now Windows 7 recognizes the driver and is properly installed.
Then I started the real thing with Odin.
I started Odin, restarted the Galaxy in download mode, connected the USB port and let windows choose the USB , but did see nothing in the Odin screen it was connected. I did dot try further and did not flash as I was not sure whether it is really connected.
I do not see any yellow part of the window.
The phone says 'Downloading...' while I did not start.
So I pulled the battery and restarted the phone in normal mode, so I can just do another try.
Here a screenshot with the phone pluggen in in download mode:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And this is what Windows shows when Galaxy is connected in 'normal' mode:
That is *not* shown when in dowload mode, very weird.

Device not connected if no yellow block at ID.Com
Turn phone off .
Reboot PC.
Start PC start Phone go to wireless in settings /USB connect usb connect Samsung usb cable and let windows find drivers exit and follow instructions to download mode .
That fails turn on or if its on off USB debugging in settings applications development .
Make sure you follow the instructions on the phones download screen .
jje

Related

[Q] Yet another Odin connection problem. I'm getting sick of this :(

Hi guyz, i just bought sgs2 yesterday, previously i've been using SGS for the past 8 months
No matter what i do, i can't get Odin to detect my SGS2 in download mode.. !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but the weird thing is, it detects the phone if its in 'switch on' mode
These are what i've done:
- installed kies
- installed driver from kies
- factory reset sgs2
Info:
* i even reformat my Windows 7 (i thought it gets conflict with my previous SGS driver) and started everything from fresh but still fail
* Kies detects my phone, i can browse contacts etc. but Odin still fail to detect in download mode
* my phone is a branded O2 Ireland. Sim free
* i've tried on other PC but still fail
Please help me, i lost hope.. i just want to Root my phone
Did you try a different usb cable? And did you close all kies programs?
Alt+Crtl+delete >> Taskmanager >> Processes and terminate everything with kies in the name.
Did you try with usb debugging off and on?
Sent from my GT-I9100 using Tapatalk
You can try heimdall
Does windows see the phone drives via USB mass storage mode ..If not its your USB drivers and thats what Odin requires .
Tried a different Odin Odin3 v1.3 always worked for me .
jje
Lennyz1988 said:
Did you try a different usb cable? And did you close all kies programs?
Alt+Crtl+delete >> Taskmanager >> Processes and terminate everything with kies in the name.
Click to expand...
Click to collapse
i've tried this method before, but still no go i have plenty of micro usb cable and already make sure no kies is running.. thanks for your reply
iznee said:
Did you try with usb debugging off and on?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
yeah, i've tried this too.. thanks bro!
pulser_g2 said:
You can try heimdall
Click to expand...
Click to collapse
unfortunately i dont know programming
JJEgan said:
Does windows see the phone drives via USB mass storage mode ..If not its your USB drivers and thats what Odin requires .
Tried a different Odin Odin3 v1.3 always worked for me .
jje
Click to expand...
Click to collapse
yeah, windows sees it as usb mass storage, i can browse my sdcard and external card after plug to it, but again, Odin doesn't detect it
geram aku!
pcboyy said:
Click to expand...
Click to collapse
i think im the only one that noticed this
are you running windows 7 through OSX ?
EDIT : yes you are i can see the macbook air lable
are u really trying to update a phone through a virtual box ????
these are very delicate things for example flashing my router through mozilla can brick it
do u have any access to a pc running windows ?

SGP5 won't come back from the dead?!

So I've been trying for quite awhile to bring my player back. I was trying to develop my kernel with it and it just plummeted to it's death eventually. I found a DD dump somewhere of another device and flashed it, which I guess might not have been exactly the right file and now here we stand.
The device doesn't turn on, I don't get any "SAMSUNG" boot logo - nothing. It comes up in windows as
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now from the research I've done, that should be the "lucky unbrickable" state. The device does nothing, but still shows up in windows. I've tried unbrickable on windows 7, windows 7 via a ubuntu VM, and went as far as to setup a dedicated desktop with ubuntu natively and a windows XP VM. I can only get my player to react on the native linux desktop, but it enters download mode really strangely -
YouTube video of it being "resurrected"-
http://youtu.be/WDclUEyoHFE?hd=1
And after that I lose USB (although the device stays on and powered up as long as I leave it connected). I tried connecting the device to my XP VM which is what everything says to do, and I get "No USB devices connected" in virtualbox. Dmesg gives me "unable to enumerate USB device on port 1, device descriptor read/8, error -71" as soon as download mode initiates.
Every time I've done this whole process before, it's worked wonderfully and you can continue on and flash your bootloaders, then reflash everything else. I've tried this whole process over and over and over and haven't had any success. I also tried a USB jig and it didn't do a single thing.
Can anyone provide ANY insight? I'm really open to anything right now, otherwise it's out for JTAGing. I'm about at whits end with it and I'm out of ideas.
THANKS!
If it "worked perfectly before" in this configuration, your pb is mostly related to Samsung win 7 drivers that are not reachable or "lost".
try to reinstall them and check their availabilty connecting another Samsung device (ask your friends);
note: For me under win 7 , I installed ubuntu as second boot with windows and I forgot the Virtual box trick, that's much simpler and I can learn linux when I have free time...
Good Luck
lolo9393 said:
If it "worked perfectly before" in this configuration, your pb is mostly related to Samsung win 7 drivers that are not reachable or "lost".
try to reinstall them and check their availabilty connecting another Samsung device (ask your friends);
note: For me under win 7 , I installed ubuntu as second boot with windows and I forgot the Virtual box trick, that's much simpler and I can learn linux when I have free time...
Good Luck
Click to expand...
Click to collapse
My windows 7 computer connects fine to my galaxy s3. I just root/recovery/rom/kernel'd it a few days ago from that computer, so everything seems to be working as it should.
Have you tried heimdall on your linux machine? Like this you would not need to disconnect your player at all and you would avoid using virtualbox.
ti-pich said:
Have you tried heimdall on your linux machine? Like this you would not need to disconnect your player at all and you would avoid using virtualbox.
Click to expand...
Click to collapse
Yeah, I actually just did that. I even went as far as trying the current and past 3 versions of heimdall and it doesn't detect any devices.
Sent from my galaxy nexus using xda app-developers app
oneclickunbrick
hey bro try this
download this program called oneclickunbrick
i done the same then when i got home i went looking and i found this
it works like a charm
ps if it doesnt work right the first few times make sure your player is using a comport of your computer and it will work like a charm
http://forum.xda-developers.com/showthread.php?p=15330252
link for the program ^
Evoium said:
hey bro try this
download this program called oneclickunbrick
i done the same then when i got home i went looking and i found this
it works like a charm
ps if it doesnt work right the first few times make sure your player is using a comport of your computer and it will work like a charm
http://forum.xda-developers.com/showthread.php?p=15330252
link for the program ^
Click to expand...
Click to collapse
Thanks, I'll try that when I get home. It looks like a precursor program to the unbrickable mod but I'm willing to try anything at this point!
Sent from my Galaxy SIII
has it worked for you ?
Have you installed the heimdall drivers? Like went into the drivers folder, ran zidag and replaced your "SAMSUNG COMPOSITE USB" or something like that with the first driver? That may make heimdall recognize it.
PairOfSocks said:
Have you installed the heimdall drivers? Like went into the drivers folder, ran zidag and replaced your "SAMSUNG COMPOSITE USB" or something like that with the first driver? That may make heimdall recognize it.
Click to expand...
Click to collapse
Yep, tried that a few times. I was using heimdall before so the drivers should be kosher for it.
It's almost like once it enters download mode the hardware isn't cooperating. I've also gone as far as trying every previous version of UnBrickable thinking one might work better, but I've gotten the same result with all the versions. Download mode shows up and then it drops all connectivity.

[Q] Why cant I find my device?

It connects fine with HTC sync, but I can't find my phone in "my computer". What am I doing wrong? I'm running Vista 32bit, btw.
now sync can't even find my phone. I tried all the usb ports on my tower, it's a fresh install of Vista that is up to date, tried reinstalling the sync program, installed some mtp drivers I found on the Microsoft site. USB debugging on and off, nothing works! and it's the stock Rom, just with some mods. ATT phone btw. any suggestions? mtp stinks btw...... I wanna flash some roms darn it!
May I suggest something to you? Uninstall all your current drivers and also remove HTC Sync, then try to follow this step-to-step guide : HERE or a more complete one HERE. If you need help or precision I will be glad to assist you.
Well i fallowed your walk through and still no luck. Im sure its not the chord i tried 3 different ones, including the the one that came wit the phone. :crying: Im completely at a loss....
NoobDude said:
Well i fallowed your walk through and still no luck. Im sure its not the chord i tried 3 different ones, including the the one that came wit the phone. :crying: Im completely at a loss....
Click to expand...
Click to collapse
you might have to connect directly from usb like the ports in the back of the pc rather then the ones in the front. also try using a different computer and see if it works or not.
well I just about given up. the issue isn't solely with my computer, as it connects just fine with every other usb device in my house, iphone, gs3, digital camera, etc. so up its an issue primarily with my phone or both my pc and phone. I haven't had a chance to try my phone on another computer yet, can't get mtp working on ubuntu. or maybe it does work, and my phones just messed up. maybe something I did, I need to stop messing with system files :laugh:. BUT I had an epiphany, ADB over WiFi, I found a bunch of apps, they all mention running apps and debugging, but can they be used as a replacement for adb via usb? can I use adb Wi-Fi to push a kernel and or recovery?
Well I made some headway! I FINALLY got my computer to at least recognize my phone. I did this control panel>add hardware and manually installing the drivers that way. SO now in device manager Android phone (sdk drivers) and HTC MTP device, finally show up. I get a code 10 on both those deives, BUT when I scan for hardware the drivers from the phone begin to install, how ever they fail to install. MY brain is beat from this, can some help give me the next little push to finally ending this debacle!?
May I ask if you have administrator privileges on your computer? On Vista this a prerogative, you MUST be an administrator otherwise the installation will fail.
Click on Start -> Control Panel -> Control Panel window opens click on the Uninstall a program (If you are using the Classic View of the Control Panel, then you would double-click on the Programs and Features icon instead.) -> The screen contains a list of the programs installed on your computer, locate everything starting with HTC and uninstall all of them.
Make sure your phone is not plugged in. Reboot your computer.
Download this file containing the Vista 32bit drivers. Put this file on your Desktop.
Plug your phone. Use Device Manager to install the driver.
Click Start, right-click Computer, and then click Properties.
In the Tasks pane, click Device Manager.
If you are prompted for an administrator password or confirmation, type your password or click Continue.
In Device Manager, locate the Android USB or MTP Device for which we want to install the driver.
Right-click the device, and then click Update Driver Software.
Click Browse my computer for driver software, click Let me pick from a list of device drivers on my computer, and then click Have Disk.
In the Install From Disk dialog box, click Browse, locate in the file you just downloaded an androidusb.inf and then click Open.
Follow the steps in the Update Driver Software Device Name dialog box to update the driver.
Reboot your computer.
Lets see the results.
NoobDude i may be beating a dead horse here but Ubuntu 13.04(even in the beta which i use as a daily os) has mtp out of the box maybe try that and install sdk, java , adb fastboot.
if lucky thirteens suggestion doesn't work, I'll try that next. cheers gents!
Lucky thirteens post didn't work at all, when i tried to update the drives I would get an error. Either that the driver wasn't compatible or the the current driver was up to date. I haven't tried updating to Ubuntu 13.4 yet. BUT, I kinda made some headway again. After several reboots and trying different things I get this, what you see in the first picture. SUCCESS!, Oh wai....(refer to second picture)..... When i plug my phone in via a USB (on the back of the computer), i get NOTHING. Sooo. One X+ FOR SALE! :laugh: :crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can you try one those drivers?
HTC USB Driver_x32_1.0.5375
Universal Naked Driver 0.72.zip
Intel® Android* USB Driver
Media Transfer Protocol Porting Kit
Also make sure your computer BIOS is up to date, try an online scan for your computer Dell PC Diagnostic
I'll give em a try fist chance I get!
NoobDude said:
I'll give em a try fist chance I get!
Click to expand...
Click to collapse
There is a universal driver from Koushik Dutta (dev of CWM). This worked on my Win8 x64 PC (nothing else would).
At least it shows my device when I type adb devices.
See if that works.
Google for it. I am not sure if I am allowed to attach the file here - hence not attaching. I also have forgotton / not saved the link. It was in his google+ post...
See if that helps
Okk the link was first when I googled .
https://plus.google.com/103583939320326217147/posts/BQ5iYJEaaEH

I can't load in fastboot mode

Hello,
I would like to root my Z5C, but I can't load the phone in fastboot mode.
I tried the following :
adb reboot bootloader (with my phone one, with usb debug)
the phone shut down completely, but nothing is displayed on the screen​
power up + volume up (from my phone shutdowned)
there are three vibrations, and sometimes the logo Xperia appears for a few second, but then the screen show the charging icon​
power down + plug usb (from my phone shutdowned)
nothing appends​
each time, I tried the following command to check if the phone was indeed in fastboot mode :
fastboot devices
but I get nothing (empty list).
Could you help me please?
thanks in advance.
As far as I know, only the led will light up. The display stays black. Have you looked in the device manager if your device is recognized there. Maybe as an unknown device etc?
then I probably don't have the correct driver. I installed this one
developer.sonymobile.com/downloads/drivers/xperia-z5-compact-driver
Do you know where I can find the correct driver?
In device manager, I see a new item when I plug my phone :
USB mass storage device
I tried to update the driver with the one mentioned before, but it says that it is already up to date.
Noneangel said:
Hello,
I would like to root my Z5C, but I can't load the phone in fastboot mode.
I tried the following :
adb reboot bootloader (with my phone one, with usb debug)
the phone shut down completely, but nothing is displayed on the screen​
power up + volume up (from my phone shutdowned)
there are three vibrations, and sometimes the logo Xperia appears for a few second, but then the screen show the charging icon​
power down + plug usb (from my phone shutdowned)
nothing appends​
each time, I tried the following command to check if the phone was indeed in fastboot mode :
fastboot devices
but I get nothing (empty list).
Could you help me please?
thanks in advance.
Click to expand...
Click to collapse
You've got some commands wrong. Volume up plus power is hard reset. You get 3 vibrations then phone is off.
To get into fastboot mode or flash mode you do not use power button and phone needs to be off. Simply hold volume up and plug in USB for fastboot mode, or hold volume down plus plug in USB for flash mode. Blue LED for fastboot and green LED for flash mode.
This is the best option for install and drivers: http://forum.xda-developers.com/showthread.php?p=48915118
I became a lot more understandable, thanks you.
I tried to install android driver from the topic you suggested (I know I should post in this topic, but I have not enough privileges to do so), but I have the following issue :
after the installation of the drivers, I followed the howto_driver.zip (the device is not recognized), and in step 5, I don't see the "android device" driver.
As suggested by
If you have problem with driver enumeration in Windows 8.1 install update KB2917929
Click to expand...
Click to collapse
I tried to install KB2917929 but during the installation I got
The update is not applicable for this computer​error. After a bit of googleing, I found this
answers.microsoft.com/en-us/windows/forum/windows_8-update/instalation-failure-for-kb2917929/9ebb0567-8923-4f13-8840-61dbe54212e5
Hi ,
The Best Thing To Install KB2917929 Is To Remove The KB2919355 Update
To remove the update, follow these methods:
Press Windows Key + X.
Click on Programs and Features.
Click on View installed updates on the left hand side.
Find the update KB2919355, right click on it and Uninstall​.
After That Re Install The KB2917929 Update And It Will Be Installed
Click to expand...
Click to collapse
But when I tried to uninstal KB2919355 I got this error :
An error has occurred. Not all of the updates were successfully uninstalled​I gave up and tried to install the usb driver from a folder. I downloaded the following driver : developer.android.com/studio/run/win-usb.html
but when I tried to update the driver, I get a message error saying
windows could not find driver software for your device.​I run out of option (I might try this with linux, but I have no machine running under linux right now).
try forcing install of the driver by selecting the unknow device/detected phone and update/install driver by "find software driver in pc" then "choose manually driver from a driver list" then "driver disk" button on the right, "explore" and go the folder and select the downloaded driver. Be sure to install the correct driver described in the guides.
I get the following after selecting the "driver disk" :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I suppose that by explore you mean Have disk.
I tried to select the usb driver directory, and I get the following error :
The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with Windows for x64-based system​The folder I selected is the unzip of the driver from developer.android.com/studio/run/win-usb.html
I'm not much help with Windows, I'm still running XP lol
civicsr2cool said:
I'm not much help with Windows, I'm still running XP lol
Click to expand...
Click to collapse
LOL kinda old school these days :cyclops:

Xperia z3c stuck on bootscreen

Heyo
Following situation:
I tried to root and flash my old Sony Xperia Z3 compact which I have been using as an mp3 player. I successfully did so (I think), however when I wiped my data to flash to linage os, it gave me error 7. I assumed it was because my TWRP version was way out of date so I updated that, and hit "reboot into recovery" to activate the new twrp version.
Unfortunately the phone didn't boot into recovery and just wound up stuck at the sony screen without anything else since no OS is installed.
I can't boot into recovery manually either, it just boots into the sony logo and gets stuck there.
I do have a backup in twrp but I can't install that since I can't get into recovery, and I can't manually access the storage since usb debugging is not active while on the sony startup screen.
Is there anything I can do or is my z3c rip?
I can connect the phone in fastboot and flashmode and flashtool does recognize it, however I can't really seem to do anything while in flashmode and fastboot mode doesn't work since flashtool tells me I don't have the right drivers for the device, however when I try to install the driveres it hands out an error message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
StanYz said:
Heyo
Following situation:
I tried to root and flash my old Sony Xperia Z3 compact which I have been using as an mp3 player. I successfully did so (I think), however when I wiped my data to flash to linage os, it gave me error 7. I assumed it was because my TWRP version was way out of date so I updated that, and hit "reboot into recovery" to activate the new twrp version.
Unfortunately the phone didn't boot into recovery and just wound up stuck at the sony screen without anything else since no OS is installed.
I can't boot into recovery manually either, it just boots into the sony logo and gets stuck there.
I do have a backup in twrp but I can't install that since I can't get into recovery, and I can't manually access the storage since usb debugging is not active while on the sony startup screen.
Is there anything I can do or is my z3c rip?
I can connect the phone in fastboot and flashmode and flashtool does recognize it, however I can't really seem to do anything while in flashmode and fastboot mode doesn't work since flashtool tells me I don't have the right drivers for the device, however when I try to install the driveres it hands out an error message
Click to expand...
Click to collapse
If your using Windows 10 you'll probably need a Windows 7 virtual machine if you don't have a physical PC with Windows 7 already installed. That or you'll need to turn on test mode for Windows
But if I may ask what fhe error(s) output whwn trying to install said drivers?
TheExploitedOne said:
If your using Windows 10 you'll probably need a Windows 7 virtual machine if you don't have a physical PC with Windows 7 already installed. That or you'll need to turn on test mode for Windows
But if I may ask what fhe error(s) output whwn trying to install said drivers?
Click to expand...
Click to collapse
I've attatched 4 screenshots in my OP, thats all I see, it doesn't actually state what the error is, just that it didn't finish.
Will it go through with win7? Actually that aside, is there a way to force a new os onto the phone via the flashtool to begin with?
Since your Windows computer needs to recognize the Xperia z3 based on Qualcomm chipset once connected, the PC should have installed proper USB drivers. which in no case depends on Windows version or Windows edition. You have to obtain the USB drivers and also the ADB / Fastboot drivers from OEM's / Carrier's website. It's never a good idea to install the ADB / Fastboot drivers elsewhere offered on WEB.
And once installed, restart the PC.
If successful then use
jwoegerbauer said:
Since your Windows computer needs to recognize the Xperia z3 based on Qualcomm chipset once connected, the PC should have installed proper USB drivers. which in no case depends on Windows version or Windows edition. You have to obtain the USB drivers and also the ADB / Fastboot drivers from OEM's / Carrier's website. It's never a good idea to install the ADB / Fastboot drivers elsewhere offered on WEB.
And once installed, restart the PC.
If successful then use
Click to expand...
Click to collapse
---
My carrier doesn't offer any drivers whatsoever.
But all of that aside, even if I do get fastboot running, is there even a way to force a new OS onto the phone via some tool?

Categories

Resources