[Q] setcpu allways asking for permissions? - HTC EVO 3D

Not sure why but setcpu is asking for permissions like all the time. I see it all the time at the bottom of the screen
Setcpu has been granted superuser permissions
And one have any idea on why and how to fix this
E3D

CheesyNutz said:
Not sure why but setcpu is asking for permissions like all the time. I see it all the time at the bottom of the screen
Setcpu has been granted superuser permissions
And one have any idea on why and how to fix this
E3D
Click to expand...
Click to collapse
It asks every minute, that's how it works, since SetCPU is always running and using root. You need to turn off show notifications in Superuser to make it stop displaying it.
In app, Settings (top right corner, not menu button) > Notifications > Uncheck the tick box for notifications.

BlaydeX15 said:
It asks every minute, that's how it works, since SetCPU is always running and using root. You need to turn off show notifications in Superuser to make it stop displaying it.
In app, Settings (top right corner, not menu button) > Notifications > Uncheck the tick box for notifications.
Click to expand...
Click to collapse
Ahh ok thanks
E3D

BlaydeX15 said:
It asks every minute, that's how it works, since SetCPU is always running and using root. You need to turn off show notifications in Superuser to make it stop displaying it.
In app, Settings (top right corner, not menu button) > Notifications > Uncheck the tick box for notifications.
Click to expand...
Click to collapse
can anyone confirm this is all it is? It happens to my 3d too but never occured on my og evo and I never had to un check notifications to get them to stop
Sent from my PG86100 using XDA App

It is happening with me as well, after a while I just went an unchecked notifications for it to stop.

CheesyNutz said:
Not sure why but setcpu is asking for permissions like all the time. I see it all the time at the bottom of the screen
Setcpu has been granted superuser permissions
And one have any idea on why and how to fix this
E3D
Click to expand...
Click to collapse
+1 something isn't right
Sent from my PG86100 using Tapatalk

I also get a set cpu force close on a reboot any one else notice that?
Sent from my PG86100 using XDA App

It's probably the kernel your using. I just flashed the silver needle kernel by Net and now I keep getting Set CPU notifications. It's easy to to unchecke the notifications in SU app so no biggie. Previous kernel I flashed didn't have the issue though.
My ''xDU4L C0R3 SH00T3Rx'' shot you down in 3D!

Related

Das BAMF v1.6 Remix Notification Bar Power Settings

When I pull down the notification bar I noticed Screen Brightness setting is not there. I see Bluetooth, GPS, WiFi, etc.
How do I get it on there?
DontCome2MyHouse said:
When I pull down the notification bar I noticed Screen Brightness setting is not there. I see Bluetooth, GPS, WiFi, etc.
How do I get it on there?
Click to expand...
Click to collapse
Grab Root Explorer from the market. Navigate to /System/Customize/Widget.txt. Long press Widget.txt, click "Open in Text Editor" (You will need to Mount your system in Root Explorer, there's an option to do so in the top-right hand corner to change it to "Mount R/O" instead of "Mount R/W.") ... then you can change one of the items to "toggleBrightness" ... make sure the "B" is capitalized or it wont work.
I suggest changing "toggleSync" unless you need to tell your phone to Sync a lot. You will need to re-start your phone for it to take effect. Presto
I believe you can just plug your phone into your computer and change this file as well if you dont have/want Root Explorer.
Whammy! Thanks!
Airplane Mode Also
That worked great.. I have been wanting that back.
would it be possible to replace data up/down with airplane mode in the same manor? Would it be "toggleAirplane" or "toggleAirplanemode"?
Thanks
lightning
what is the lightning icon i am seeing on other's phones?
jhnegbrt said:
what is the lightning icon i am seeing on other's phones?
Click to expand...
Click to collapse
That would be a flashlight...."toggleFlashlight"
What extension do I use for turning sound off instead of going from sound to vibrate?
Sent from Verizon in Phoenix, AZ, running a rooted Thunderbolt, with Das BAMF Remix 1.6.2
raider3bravo said:
What extension do I use for turning sound off instead of going from sound to vibrate?
Sent from Verizon in Phoenix, AZ, running a rooted Thunderbolt, with Das BAMF Remix 1.6.2
Click to expand...
Click to collapse
Go into the Power Control Widget app and under Sound settings, you should have an option that goes Sound>Silent. Set that and you should be good.
spyderman09 said:
Go into the Power Control Widget app and under Sound settings, you should have an option that goes Sound>Silent. Set that and you should be good.
Click to expand...
Click to collapse
Haha. Awesome, it worked! Many thanks. This rom is definitely growing on me.
Where can I find the file to modify the screen brightness under power controls?
raider3bravo said:
Where can I find the file to modify the screen brightness under power controls?
Click to expand...
Click to collapse
I think the only thing you can really do with the brightness is select from one of the predetermined settings in the app. I would like to change that around, too, but I've settled with just selecting the order that closely matches what I would do.
Not sure if there is a way to modify the settings without modifying the app.
is there a way to have a 4g only toggle for on/off?
It's been soo long since I've had this phone
Sent from my SCH-I605 using Tapatalk 2

General Evo 3d Text question

So is it possible that when I receive a new text message it doesnt show up all huge on the front of the screen? id rather just get the notification. I looked and couldnt find a way to stop it from doing it.
schnergun said:
So is it possible that when I receive a new text message it doesnt show up all huge on the front of the screen? id rather just get the notification. I looked and couldnt find a way to stop it from doing it.
Click to expand...
Click to collapse
What mms app are you using?
-----
3vo. That is all that needs be said.
user7618 said:
What mms app are you using?
-----
3vo. That is all that needs be said.
Click to expand...
Click to collapse
Pretty sure the OP is using the Stock messaging app which shows a pop up on the lock screen with an incoming text.
Vdubtx said:
Pretty sure the OP is using the Stock messaging app which shows a pop up on the lock screen with an incoming text.
Click to expand...
Click to collapse
that checks. I am just using the stock app that comes on it
Hmm... I didn't see an option in either the lock screens or the mms.apk to disable that.
EDIT: home screen > menu > settings > privacy
Uncheck the first option.
-----
3vo. That is all that needs be said.
user7618 said:
Hmm... I didn't see an option in either the lock screens or the mms.apk to disable that.
EDIT: home screen > menu > settings > privacy
Uncheck the first option.
-----
3vo. That is all that needs be said.
Click to expand...
Click to collapse
That does it.
user7618 said:
hmm... I didn't see an option in either the lock screens or the mms.apk to disable that.
Edit: Home screen > menu > settings > privacy
uncheck the first option.
-----
3vo. That is all that needs be said.
Click to expand...
Click to collapse
awesome thanks!!!
xxxxxxxxxx
Try
A good replacement I'm using is "SMS Popup" V1.1.0... Works well and has nice privacy settings.

[Q] JB standby home button closes app.

Hi,
I seem to have this annoying problem. Lets say I am reading an article in some app. Now my phone goes on standby after 1 minute of inactivity. In ICS, I could press the home button and get back to the app I was on. In JB pressing the home button closes the app and brings me back to home screen. Is there a way to disable that?
Yes there is. Go to settings, than developer settings, scroll down to bottom and uncheck "Destroy any activity soon as user leaves is"
Also, check background process limit. If it is set to 0 then select "Standard Limit"
Sent from my GT-I9300 using xda app-developers app
Fycola123 said:
Yes there is. Go to settings, than developer settings, scroll down to bottom and uncheck "Destroy any activity soon as user leaves is"
Also, check background process limit. If it is set to 0 then select "Standard Limit"
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
My developer options were off. And none of that was checked anyways. The annoyance started when I updated to JB.
Than really i cant help you, because i dont have that problem. I also have jelly bean installed.
Sent from my GT-I9300 using xda app-developers app
Fycola123 said:
Than really i cant help you, because i dont have that problem. I also have jelly bean installed.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Oh well thanks. Hopefully someone can figure out a way to solve this problem.
Have exactly the same problem. Before Jelly Bean this didn't happen.
I guess I'll just have to get used to waking it up with the power button instead until there's a fix.
Btw I'm running stock 4.1.1.
Sent from my GT-I9300 using xda developers app
circuit89 said:
Hi,
I seem to have this annoying problem. Lets say I am reading an article in some app. Now my phone goes on standby after 1 minute of inactivity. In ICS, I could press the home button and get back to the app I was on. In JB pressing the home button closes the app and brings me back to home screen. Is there a way to disable that?
Click to expand...
Click to collapse
The problem is that the lock screen has not yet activated, therefore commands are passed to the current app running. You need to use the power button to turn on the screen. Else, search thru the settings for where to change the lock screen to lock immediately the screen the screen goes off. This might help.
HTH
guhvanoh said:
The problem is that the lock screen has not yet activated, therefore commands are passed to the current app running. You need to use the power button to turn on the screen. Else, search thru the settings for where to change the lock screen to lock immediately the screen the screen goes off. This might help.
HTH
Click to expand...
Click to collapse
yes it helps.you must set the lock screen and it works.but is there any way without look screen to ?
This problem seems to be affecting those who turned off S-Voice
Just go into its setting and enable it to activate via double pressing home button. The problem then goes away in JB.
yes it works ! i have only installed s-voice apk and thats it !

Not sticking [ROOT REQ] Remove constant wifi nag

It has been brought to my attention this fix does not stick through reboot or wifi cycle. I will mess around with the editor some more however I fear without modifying the framework it may not be possible to completely be rid of it. Moderator can lock the thread please.
have discovered how to remove the constant notification that wifi is off. You must be rooted (thanks to the devs who made that happen) and have SQLite Editor installed.
It is available from the Google Play Store for 2.99. https://play.google.com/store/apps/details?id=com.speedsoftware.sqleditor&feature=search_result#?t=W251bGwsMSwyLDEsImNvbS5zcGVlZHNvZnR3YXJlLnNxbGVkaXRvciJd
Open SQLite, allow root access and navigate down to "Settings storage". Click it then click "settings.db" then "secure". The last line (351 on my device) is entitled wifi_watchdog_on and the value is listed as 1. Click on this then click the pen in the upper center corner to edit the value. Change it to a 0 (zero) and click save. Back out of the app then pull down your notification shade. Long press on the *&#%$* wifi nag until "app info" is shown. Click it then select force close. It will give you the standard warning but don't worry about it.
After these steps are taken the nag will be gone! Hope it helps someone who is irritated like I was.
Thank you for this! Worked perfectly
Sent from my SCH-I605 using Tapatalk 2
Thanks!
Thank you very much!!
This worked, but once I turned wifi back on it came back once I disconnected. Anyway to make it permanent?
Doesn't stick for me, the nag comes back and the setting goes back to 1 after a reboot...
is there a way to do this for the blocking mode nag as well?
Sent from my SCH-I605 using xda premium
coming back on for me as well.
Can this be done with the FREE SQLite Manager app?
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS54dWVjcy5zcWxpdGVtYW5hZ2VyIl0.
If you forcefully uninstall the WiFi nag app, will this prevent it from relaunching everytime you reboot or turn WiFi on?
The app info of the wifi nag said it was Android System
FMXP said:
Can this be done with the FREE SQLite Manager app?
https://play.google.com/store/apps/...wsMSwxLDEsImNvbS54dWVjcy5zcWxpdGVtYW5hZ2VyIl0.
If you forcefully uninstall the WiFi nag app, will this prevent it from relaunching everytime you reboot or turn WiFi on?
Click to expand...
Click to collapse
Well... When you long press on the wifi nag on your shade, then choose app info... it's a part of android system that you're stopping... don't know if uninstalling it is possible.
Hmm...I wonder if it's a part of the TouchWiz framework. Hopefully someone can make a hack for it which removes the Ongoing Notification, and also puts the WiFi toggle back in the Notifications Control Panel where it belongs.
You can put the WiFi icon and whatever else you want (I add a flashlight also) to the taskbar with the app "notification toggle" from the playstore.
I have used this temporarily on a few different phones while I was waiting on Custom ROMs to make their appearance.
It works perfectly.
This doesn't stick.
Sent from my SCH-I605 using xda app-developers app
Thanks everyone. I have updated the op and will continue to explore some way to make this stick.
i dunno about the toggle, but the wifi notification is probably an edit in services.jar
Sent from my SCH-I605 using Tapatalk 2
MoeDaddy said:
Doesn't stick for me, the nag comes back and the setting goes back to 1 after a reboot...
Click to expand...
Click to collapse
That's why I didn't post this info two days ago.......
BlueHarford said:
This doesn't stick.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
I'm in the same boat this will not stay off I force close it and few later it comes back.
Any solutions
Sent from my Vzw GN2
Wifi Toggle
FMXP said:
Hmm...I wonder if it's a part of the TouchWiz framework. Hopefully someone can make a hack for it which removes the Ongoing Notification, and also puts the WiFi toggle back in the Notifications Control Panel where it belongs.
Click to expand...
Click to collapse
I was in the same boat with you man but there is away to add the toggle were vzw should have put it. its the best.
Heres the Link
http://forum.xda-developers.com/showthread.php?t=2030539
All Cred goes to Hairdewx
View attachment 1540118
under "Settings storage" then click "settings.db" then "secure". The last line is (125 wifi_on) not line (351 on my device) is entitled wifi_watchdog_on!
what am i doing wrong?

Battery protection app for JB

The developer threads seem to indicate that there is a danger running JB of 'bricking" the TP if the battery is allowed to discharge all the way. It is suggested that an app like "Battery Check" should be used to turn off the TP when the battery reaches a set percentage charge.
My problem is that I'm not sure "Battery Check" is working on my TP. The only "setting" I see when I run it is a slide bar for setting the percent of charge. But when I set the bar, and tap "Launch Service", the app exits. I'm assuming that it is now set to turn off when it reaches what I set. The problem is that my assumption could be wrong and being wrong could "brick" my TP. A chance I'm NOT willing to take.
Can anyone verify that "Battery Check" works and that I've set it up properly? Does it actually turn off the TP, or just "sound an alarm" that I'm likey to miss if I'm asleep?
lewmur said:
The developer threads seem to indicate that there is a danger running JB of 'bricking" the TP if the battery is allowed to discharge all the way. It is suggested that an app like "Battery Check" should be used to turn off the TP when the battery reaches a set percentage charge.
My problem is that I'm not sure "Battery Check" is working on my TP. The only "setting" I see when I run it is a slide bar for setting the percent of charge. But when I set the bar, and tap "Launch Service", the app exits. I'm assuming that it is now set to turn off when it reaches what I set. The problem is that my assumption could be wrong and being wrong could "brick" my TP. A chance I'm NOT willing to take.
Can anyone verify that "Battery Check" works and that I've set it up properly? Does it actually turn off the TP, or just "sound an alarm" that I'm likey to miss if I'm asleep?
Click to expand...
Click to collapse
Try Automatelt it is easy to setup and has a test function. If you have any problems with it pm me.
sstar said:
Try Automatelt it is easy to setup and has a test function. If you have any problems with it pm me.
Click to expand...
Click to collapse
Turning off the TP isn't listed as an "Action" to take when the "trigger" (battery below) is reached.
lewmur said:
Turning off the TP isn't listed as an "Action" to take when the "trigger" (battery below) is reached.
Click to expand...
Click to collapse
Action is shutdown see screenshots below, i know there's one to many by i can't find my glasses.
Have fun there are lots of options.
Sent from my cm_tenderloin using Tapatalk 2
sstar said:
Action is shutdown see screenshots below, i know there's one to many by i can't find my glasses.
Have fun there are lots of options.
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
"Set Shutdown" isn't listed. What am I missing?
lewmur said:
"Set Shutdown" isn't listed. What am I missing?
Click to expand...
Click to collapse
Under action it is called (shutdown device) it is there look at the screenshot.
It is forth from the bottom of the list of actions.
sstar said:
Under action it is called (shutdown device) it is there look at the screenshot.
It is forth from the bottom of the list of actions.
Click to expand...
Click to collapse
Do you have a version # for your Automateit app. My screen looks like that but there is no "Shutdown" option. I solved the problem by installing "Power Off" and having Automateit call that app as the "Action". That worked.
Thanks
Lew
lewmur said:
Do you have a version # for your Automateit app. My screen looks like that but there is no "Shutdown" option. I solved the problem by installing "Power Off" and having Automateit call that app as the "Action". That worked.
Thanks
Lew
Click to expand...
Click to collapse
Version 3.0.51 which is the latest all my apps are set to auto update.
sstar said:
Under action it is called (shutdown device) it is there look at the screenshot.
It is forth from the bottom of the list of actions.
Click to expand...
Click to collapse
sstar said:
Version 3.0.51 which is the latest all my apps are set to auto update.
Click to expand...
Click to collapse
This is weird. There was no shutdown option when I created the first "rule". But, now, if I go back to add another rule, the Shutdown action IS available. And my version is the same as yours.
lewmur said:
This is weird. There was no shutdown option when I created the first "rule". But, now, if I go back to add another rule, the Shutdown action IS available. And my version is the same as yours.
Click to expand...
Click to collapse
Go figure, I am glad you finally got it sorted and trust the screen shots helped. You now shouldn't have to worry about a bricked tablet but I would still shutdown if you are not going to use it or are going out etc .
i had that problem too. something to do with some actions requiring root like shutdown, but i don't remember but i enabled it somehow. check settings and look for enabling root options maybe.
When I installed AutomateIt on my TB, I was asked to confirm root access for the app.

Categories

Resources