I'm trying to use AppInventor, which wants me to use the debugging mode of the device.
When enabling it and plugging to the computer, it only notifies that the USB is connected, and doesn't say anything about debug mode.
This cause AppInventor to not recognize the device.
In "Device Manager" (WIN XP) everything is good and the phone is recognized.
any suggestions?
guyman20 said:
I'm trying to use AppInventor, which wants me to use the debugging mode of the device.
When enabling it and plugging to the computer, it only notifies that the USB is connected, and doesn't say anything about debug mode.
This cause AppInventor to not recognize the device.
In "Device Manager" (WIN XP) everything is good and the phone is recognized.
any suggestions?
Click to expand...
Click to collapse
Turn it on in applications settings menu
pulser_g2 said:
Turn it on in applications settings menu
Click to expand...
Click to collapse
i did already
So I'm trying to root my GS4 with the VRUAMDK method, but I can't seem to get the little pop up dialoge to appear on my phone when i plug it into the computer and enable USB Debugging.
Anyone know how to re enable the dialoge that prompts you to always acecpt from this computer?
gleggie said:
So I'm trying to root my GS4 with the VRUAMDK method, but I can't seem to get the little pop up dialoge to appear on my phone when i plug it into the computer and enable USB Debugging.
Anyone know how to re enable the dialoge that prompts you to always acecpt from this computer?
Click to expand...
Click to collapse
go to settings> more> about phone> click build number area about 7 times and it will enable developer options which gives you the options for usb debugging
goosedaddy said:
go to settings> more> about phone> click build number area about 7 times and it will enable developer options which gives you the options for usb debugging
Click to expand...
Click to collapse
I already had it enabled its just that the dialog wasn't coming up when I plugged it into my computer. Factory Resetting fixed it though. Thanks anyways
My phone isn't being detected by adb. Almost as if USB Debugging isn't even enabled (which it is). ADB is just blank when I run adb devices.
I've installed the LG VZW G3 drivers. Any suggestions?
Make sure you change the USB mode to internet and then Ethernet. Took me a while to figure that out.
Make sure you have developer options visible
Enable USB debugging
Connect your phone to your computer
Pull down and change the USB connection from installer/MTP to internet > ethernet
Open Command Prompt window where ADB is installed, and type in "adb devices"
Allow when you see the RSA prompt
Run the batch file for ioroot, type "adb reboot recovery", install from adb, run sideload command, and then reboot
Also, make sure you're running the latest version of the SDK. Mine wouldn't work until I updated. HTH!
mjforte said:
Make sure you change the USB mode to internet and then Ethernet. Took me a while to figure that out.
Click to expand...
Click to collapse
+1
Sent from my VS985 4G using Tapatalk
mjforte said:
Make sure you change the USB mode to internet and then Ethernet. Took me a while to figure that out.
Click to expand...
Click to collapse
+1 - This was my problem too...many thanks!
usb drivers
blmartin said:
+1 - This was my problem too...many thanks!
Click to expand...
Click to collapse
Use the LG USB drivers for Verizon Wireless!
Change the usb connection mode to Internet/Ethernet
My adb was the problem on mine. I had to reinstall java jdk and the sdk and worked perfectly the first time I tried after that
asialove2013 said:
Use the LG USB drivers for Verizon Wireless!
Change the usb connection mode to Internet/Ethernet
Click to expand...
Click to collapse
Either I'm completly blind or ... my G3 doesn't have that option. I only got "Charge Phone", "Media Device (MTP)", and "Send images (PTP)" to configure the USB PC CONNECTION. I also have the option to switch on USB tethering, but that doesn't change anything for the better, either.
Where's that Internet/Ethernet connection mode hidden?
The internet option might not appear until the usb is connected to the pc. Recheck available options while connected.
-Set phone for PTP connection
-Plug phone into PC via USB. You should see a driver loading/loaded message on your PC
-On the phone, change USB connection to Internet, then select Ethernet on the submenu that will appear
(PTP seems to "wake up" the ADB driver on the PC side for me. This was mandatory on a couple of prior phones/tablets, so it's what I did with the G3.)
Or switch to Linux and never hear about drivers ever again!
Verizon on Windows 8.1
So, the problem I had on windows 8.1 was that when you connect the device and it asks you what action to take automatically, you need to click that and install the Verizon stuff. I had my phone in USB debugging and Ethernet mode while doing this install. After it installed everything, the window on my phone for debugging permission showed up, and I allowed it. The phone now shows up in adb. I don't know if this was obvious but I thought Id mention it anyway
After the last G3 update from Verizon, the Ethernet option is gone. I can't get it to talk with ADB any longer. I see the developer mode come up on the phone, but it never asks for security key or appears in the ADB list. Anybody have any good ideas? This is on a Mac and I've never had a problem before doing this.
EDIT: After juggling back and forth from PTP to MTP to PTP, restarting ADB, I got it to connect. No clue what the key was, but working again for the moment. The Ethernet option is still gone from the phone though so that simple fix is no longer an issue.
Averix said:
After the last G3 update from Verizon, the Ethernet option is gone. I can't get it to talk with ADB any longer. I see the developer mode come up on the phone, but it never asks for security key or appears in the ADB list. Anybody have any good ideas? This is on a Mac and I've never had a problem before doing this.
EDIT: After juggling back and forth from PTP to MTP to PTP, restarting ADB, I got it to connect. No clue what the key was, but working again for the moment. The Ethernet option is still gone from the phone though so that simple fix is no longer an issue.
Click to expand...
Click to collapse
I installed the skydragon rom, which is based on stock so probably the same. I found that PTP worked but MTP did not. This is in Ubuntu Linux.
Hello,
I recently installed Cyanogenmod on my phone using the CM Installer. Now my phone is having issues connecting to the PC. I want to try and troubleshoot the problem by turning off ( or on???) USB Debugging.
I push the Build Number 7 times. It brings up Developer Options. I go there but USB Debugging is not listed as an option. Other options are there such as...
- Android debugging
- USB debugging notify
- ADB over network
... etc.etc.
Does anyone know what happened?
Kind Regards
Cheers
rouhio said:
Hello,
I recently installed Cyanogenmod on my phone using the CM Installer. Now my phone is having issues connecting to the PC. I want to try and troubleshoot the problem by turning off ( or on???) USB Debugging.
I push the Build Number 7 times. It brings up Developer Options. I go there but USB Debugging is not listed as an option. Other options are there such as...
- Android debugging
- USB debugging notify
- ADB over network
... etc.etc.
Does anyone know what happened?
Kind Regards
Cheers
Click to expand...
Click to collapse
What version of cyanogenmod have you installed on your phone (I knows it's install version, but have you updated yet?) What does android debugging say?
Hello all,
I purchased this phone a month back and would like to install custom roms/root it etc.
I am unable to get my phone to enable USB debugging and allow access for my PC. (I have a unlocked bootloader). The notification (prompt) for USB Debugging which shows up the phone (asking if one wants to grant access or not) doesn't show up. Hence I am unable to use adb or fastboot to install TWRP.
I have tried using the cable provided by the company on both USB 3.0 & 2.0 ports to no avail.
I am aware that there is a "How to Guide" under the News/Discussions section. However, it hasn't helped me much.
Any possible solutions?
Thank you
PS- When I connect to pc using USB cable I get the prompt asking me if I want to use it for file transfer,PTP or no data transfer.
Are the drivers properly installed?
What does the device manager show, when your phone is connected via USB and USB debugging is switched on?
What happen if you type "adb shell" when your phone is connected?
Enable it in developer option
Allow USB debugging and USB debugging Security Settings) in Developer Options