hi,
can i flash CM7 on GB bootloader ?
I'm just having a hard time rooting my phone(usb problem, but i can get to download mode) after going back to stock.
I'm right now on 2.3.4 ROM(non CM7).
You can flash it, but you wont have access to your external sdcard.
And before you go to CM7, Odin the froyo bootloaders, then Odin back to jfd, then flash CM7.
Sent from my SGH-T959 using XDA App
doesnt taking the external out and putting it into 1 of them usb stick things to plug in by itself work or it just doesnt work plugging the phone into usb ??
im not on CM7, just wondering
geoffcorey said:
You can flash it, but you wont have access to your external sdcard.
And before you go to CM7, Odin the froyo bootloaders, then Odin back to jfd, then flash CM7.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
2 questions
1. doesn't JFD tar has boot loaders in it that will be flashed during odin ?
2. if i do need froyo boot loaders, where can i take them from ?
thanks.
xxprowler said:
2 questions
1. doesn't JFD tar has boot loaders in it that will be flashed during odin ?
2. if i do need froyo boot loaders, where can i take them from ?
thanks.
Click to expand...
Click to collapse
same place you got the GB 1s from
^that about the ffroyo bootloaders... you wont have aaccess to external sd on your phone if you have cm7 and gb bootloaders. I suggest you odin froyo bootloaders, thrn jfd and the flash cm7 as mentiones above.. idk if odin jfd will do bootloaders as wwell, just do it the long way.
Sent from a cell tower to the XDA server to you.
xxprowler said:
2 questions
1. doesn't JFD tar has boot loaders in it that will be flashed during odin ?
2. if i do need froyo boot loaders, where can i take them from ?
thanks.
Click to expand...
Click to collapse
1: nope, it does not contain any bootloaders.
2: the same.place you get the gb bootloaders. Go look in the dev section within the 1st 3 pages. It's in there.
Sent from my SGH-T959 using XDA App
Nighty #73 changelog said:
kernel: support for emmc on gingerbread bootloaders (android_device_samsung_vibrantmtd)
So... im going to install #73 right now, and let you guys know how its works.
Update: Nightly 73# and up Will work with GB Bootloaders, External SD card works. Now you can bounce around between 2.2/2.2.1, JVR, CM-7 and Maybe Miui, without having to Odin. WOOT!
Related
Just wondering what else they do besides fix rainbow effect.
I've had a bad past with bootloaders... SoftBricked a few times, hard bricked twice.
So what are the benefits?
And if I do flash bootloaders, when I odin to eclair does it auto flash the default bootloaders?
xriderx66 said:
Just wondering what else they do besides fix rainbow effect.
I've had a bad past with bootloaders... SoftBricked a few times, hard bricked twice.
So what are the benefits?
And if I do flash bootloaders, when I odin to eclair does it auto flash the default bootloaders?
Click to expand...
Click to collapse
They give a more convenient key mapping to enter the download mode and recovery.other than that no I guess.flashing to eclare does not restore original bootloaders.you have to flash it separately if you want it.but bootloadres are backward compatible.so no need to so.But if you are flashing a CM based rom you need to be on froyo bootloaders even its a GB rom.
Sent from my SGH-T959 using XDA App
nuwanmw1988 said:
They give a more convenient key mapping to enter the download mode and recovery.other than that no I guess.flashing to eclare does not restore original bootloaders.you have to flash it separately if you want it.but bootloadres are backward compatible.so no need to so.But if you are flashing a CM based rom you need to be on froyo bootloaders even its a GB rom.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
+1 and it provides less conflicts with all the newer software we are now using.
I think some of the other custom bootloaders were snappier but that's the trade off less speed but less conflicts
ok thats all i needed, thanks guys
Some Odin packages do contain bootloaders. I haven't flashed actual jfd in a long time, so I don't remember if it does, I do know the jk2 odin package eugene373 put together does flash bootloaders.
You can view the tar archive with 7zip or wnrar, if it contains the boot.bin and sbl.bin, then it will flash bootloaders along with everything else.
Sent from my ZenDroid, meditating on the XDA App
So i have tried pretty much all of the GB roms and they are either just not stable enough or they eat through battery like a fat kid on cake.
Is there anything I need to know before going back to Froyo?
Was just planning on ODIN to stock, then flashing a Froyo ROM. But I was unsure if there will be a bootloader issue (or will that be fixed with the ODIN flash)?
thanks
Wondering the same thing
ripsphone said:
So i have tried pretty much all of the GB roms and they are either just not stable enough or they eat through battery like a fat kid on cake.
Is there anything I need to know before going back to Froyo?
Was just planning on ODIN to stock, then flashing a Froyo ROM. But I was unsure if there will be a bootloader issue (or will that be fixed with the ODIN flash)?
thanks
Click to expand...
Click to collapse
I'm searching for an answer to the same question. I hooked my friend's Vibrant up to Simply Honey but now i think she would be better off with MIUI. After plowing through thread after thread, you flashing to stock Froyo would not restore your Froyo Bootloader. You have to flash that separately.
You may want to consider giving this a shot though -- a custom gingerbread bootloader that is compatible with Froyo ROMS.
http://forum.xda-developers.com/showthread.php?t=1117990
Otherwise:
1. Flash to JFD ODIN (http://forum.xda-developers.com/showthread.php?t=734475)
2. Flash Froyo Bootloaders
3. Root (if necessary)
4. Install Clockwork / Rom Manager (if applicable)
5. Flash ROM of your choice.
You can skip steps 1-4, above. The ginger bootloader is backward compatible. Just did this to my phone and my wife's, Asgard -> zen Droid
Sent from my SGH-T959 using xda premium
adamcooks said:
You can skip steps 1-4, above. The ginger bootloader is backward compatible. Just did this to my phone and my wife's, Asgard -> zen Droid
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Unless you're going to CM7/MIUI/other AOSP rom, in which case I believe the bootloader will prevent you from getting into your sd card. I'd go in this order:
1.) ODIN Froyo Bootloaders.
2.) ODIN JFD w/ 512 pit and repatition checked.
3.) Root
4.) Install CWM
5.) Go flash happy on AOSP or 2.2 roms.
Just my personal preference. I like the updated bootloader for all my roms. I find it much easier to key press into recovery and download mode. No more three button hope you get the timing correct. Simply either up or down and power, bam your doing what you want.
I think that cm/mini has been updated to work with the gingy loaders (but I am not 100%on that)
As far as going to stock, while I find merit in it, I don't think it's necessary in between all ROM flashing. If you have some issues it can be a needed step.
Sent from my SGH-T959 using xda premium
Oxirane said:
Unless you're going to CM7/MIUI/other AOSP rom, in which case I believe the bootloader will prevent you from getting into your sd card.
Click to expand...
Click to collapse
According to the custom GB BL thread starter, his custom bootloaders are compatible with CM7/MIUI. He says it here:
http://forum.xda-developers.com/showpost.php?p=16691801&postcount=357
Currently flashing ICS Passion as every version appears. I try to clean out my phone every 2 versions or so by reverting to stock then back to CM7 then back to ICS again
Everytime I go from ICS back to Stock, I first go to ODIN and convert my bootloader back to Froyo. Then only do i install stock.
Is this constant change of bootloaders from GB to Froyo necessary or will it eventually kill my phone if i keep flashing back and forth?
So far my phone is going great...no problems. Question is Just for knowledge.
Definitely put yourself at a greater risk to mess it up! Honestly, I don't think it matters. I've read people using ics just fine on froyo loaders and the GB loaders say they are compatible with froyo roms. So there really is no reason to keep switching back and forth.
Sent from my SGH-T959 using XDA App
Don't be so sure of that, though.. there's been a few hard bricks going back to stock with Gingerbread bootloaders, it's safest to go the way you're doing it, not sure if it'll 'kill' your phone sooner.
My experience is that I put GB bootloaders on months and months ago and have never gone back to froyo bootloaders. I have odined back to stock jfd many times with GB bootloaders. I have used them for 2.1, 2.2, 2.3 and 4.0 roms.
Also I have put ICS Passion on a few phones now and have never flashed cm7 in the process. I have flashed straight from 2.2 and 2.3.
Odin gb bootloaders if not installed then I factory reset, wipe cache, format system, flash ics, wipe dalvik, fix permisions, boot system. First time it goes into a bootloop due to cwm mismatch, pull batt, boot recovery and repeat the flash process. It boots fine the second time. I've never had issues with fc's, lag, etc.
bobshute said:
My experience is that I put GB bootloaders on months and months ago and have never gone back to froyo bootloaders. I have odined back to stock jfd many times with GB bootloaders. I have used them for 2.1, 2.2, 2.3 and 4.0 roms.
Click to expand...
Click to collapse
I agree with that. I flashed GB bootloaders half a year ago and never had any problem.
I'd rather stick to GB bootloaders, and what dpaul007 said, you risk it alot by flashing it often.
Ive been on the GB boot loaders for over 6 months - no issues. Odin'd JFD about 5 times since then...no issues.
Ill prob try Odin to Lidriod next time though.
Jfd is fine. but once i trid to flash stock froyo jfd to kb7(odin) without change the gingerbread bootloader. My phone was hardbricked.exactly i can not say reson was the gn bootloader. Be safe its not good to change bootloader its a great risk. Whenever i want flash an ics Rom first i flash cm then ics. No rainbow issue at all.
Sent from my vibrant using xda premium
gdtennak said:
Jfd is fine. but once i trid to flash stock froyo jfd to kb7(odin) without change the gingerbread bootloader. My phone was hardbricked.exactly i can not say reson was the gn bootloader. Be safe its not good to change bootloader its a great risk. Whenever i want flash an ics Rom first i flash cm then ics. No rainbow issue at all.
Sent from my vibrant using xda premium
Click to expand...
Click to collapse
The only time you will run into issues is if you Odin a rom that only has one of the two bootloaders files in it causing a mismatch. The two files are boot.bin (primary bootloader) and sbl.bin (secondary bootloader). If both of those files are from the same generation (froyo or GB) there is no problem.
The problem you had with ka7 is it only had the sbl.bin file and not the boot.bin file leaving you with a gb boot.bin and a froyo sbl.bin. They should never have put one file in a rom without the other. JFD does not have either bootloader files in it so it's a safe odin with either gb or froyo bootloaders. Btw you would run into the same problem if on froyo bootloaders you odined a gb rom with only a gb sbl.bin and not a gb boot.bin.
I never Odin a rom that has either bootloader files in it. I use 7zip to open the tar to check. If either boot.bin or spl.bin are in it I remove them first or don't odin the tar. Then there is no problem. I do not like flashing roms with bootloaders as I would rather flash the bootloaders myself.
bobshute said:
The only time you will run into issues is if you Odin a rom that only has one of the two bootloaders files in it causing a mismatch. The two files are boot.bin (primary bootloader) and sbl.bin (secondary bootloader). If both of those files are from the same generation (froyo or GB) there is no problem.
The problem you had with ka7 is it only had the sbl.bin file and not the boot.bin file leaving you with a gb boot.bin and a froyo sbl.bin. They should never have put one file in a rom without the other. JFD does not have either bootloader files in it so it's a safe odin with either gb or froyo bootloaders. Btw you would run into the same problem if on froyo bootloaders you odined a gb rom with only a gb sbl.bin and not a gb boot.bin.
I never Odin a rom that has either bootloader files in it. I use 7zip to open the tar to check. If either boot.bin or spl.bin are in it I remove them first or don't odin the tar. Then there is no problem. I do not like flashing roms with bootloaders as I would rather flash the bootloaders myself.
Click to expand...
Click to collapse
Thank you so much for you explanation. I never knew what was gone worng. Seems like its risky to flash a rom using odin without cheking both bootloaders.
Sent from my vibrant using xda premium
So I should stick to gingerbread bootloader now on and make sure that files i flash have both .bin and .sbl to eliminate bootloader mismatch
Thanks for all the responses!
Sent from my SGH-T959 using XDA App
accura407 said:
So I should stick to gingerbread bootloader now on and make sure that files i flash have both .bin and .sbl to eliminate bootloader mismatch
Thanks for all the responses!
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes, but make sure that the tar's you Odin DO NOT have either boot.bin or sbl.bin in them unless you specifically want to change your bootloaders, then they must have both. A flash from CWM will never (can never) have them.
I only use ODIN to flash back to stock JFD
Everything after that, I flash only using CWM. So that means I should be safe then right?
Because as previously said, stock JFD has no .bin or .sbl right?
Sent from my SGH-T959 using XDA App
accura407 said:
I only use ODIN to flash back to stock JFD
Everything after that, I flash only using CWM. So that means I should be safe then right?
Because as previously said, stock JFD has no .bin or .sbl right?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
right
10char
So now i kept gb bootloader, reverted back to stock JFD....with stock it would do the is9000 then vibrant screen
Once i loaded ICS there is only a galaxy boot, no vibrant boot...my understanding is that all this is normal.
Question is....if i want to revert to stock Jfd again there are no other steps i need to take right? Just the same as usual i hope.
Thanks
Sent from my SGH-T959 using XDA App
Do I revert to JFD the same way with GB bootloader as I would with froyo bl ?
Going from 4.0 to 2.1
Sent from my SGH-T959 using XDA App
From what I understand you can revert back to JFD normally unless the JFD Odin package contains only an Sbl.bin or only boot.bin...
adyscorpius said:
8. Can I ODIN to stock JFD like I always did?
The JFD Odin packages that I have seen don't contain sbl.bin or boot.bin ! Hence, till that's the case, its safe to ODIN to stock. Please check your ODIN tar packages using 7zip or WinRAR or any other Archive utility for absence/presence of the mentioned files. If they do appear, they should be present together. Else, if they don't appear, you are safe to ODIN to stock.
Click to expand...
Click to collapse
Pretty sure there are not any ROMs with them in there, so you should be safe.
If you do Odin back to stock, chances are that you'll lose your GB bootloaders as most pit/tar packages will restore you to Froyo bl's.
If you want GB bl's, you'll have to reflash them again. That is ususally what I do.
So Odin to stock JFD then flash gb boot loaders after .
Was wondering cause there was a JFD file specifically for GB BLs which doesn't have a working link
Woodrube said:
Pretty sure there are not any ROMs with them in there, so you should be safe.
If you do Odin back to stock, chances are that you'll lose your GB bootloaders as most pit/tar packages will restore you to Froyo bl's.
If you want GB bl's, you'll have to reflash them again. That is ususally what I do.
Click to expand...
Click to collapse
Sent from my SGH-T959 using XDA App
Yep. That'll work just fine.
That JFD was floating around and I might have a copy of it somewhere on my HD, but really if you've flashed bl's before, then you know what's up and don't need that package. It is more for noobs who are scared to flash the bl's by themselves.
Alright thanks bro didn't know what that file was for...
Sent from my SGH-T959 using XDA App
Beaten drum, but yeah, I used my ODIN files in the noob guide many times to go back to JFD with no issues.
Are there any ways to flash bootloaders without odin/heimdall? Perhaps like update.zip?
I had a bad SBL flash and heimdall will not detect and odin just hangs when attempting to flash any BL solo.
Before you flame or try to be Cpt Obvious I did search the forum but may have missed it...we are human.
Sent from my SGH-T959 using XDA
No unfortunately there isn't bc it goes much deeper in the system than an update.zip can reach. Have you tried to Odin to 2.1 and get it to boot? 2.1 has Froyo bl's, so theoretically once you boot up, you should be able to flash a GB bl. Maybe your download got corrupted too.
Woodrube said:
No unfortunately there isn't bc it goes much deeper in the system than an update.zip can reach. Have you tried to Odin to 2.1 and get it to boot? 2.1 has Froyo bl's, so theoretically once you boot up, you should be able to flash a GB bl. Maybe your download got corrupted too.
Click to expand...
Click to collapse
I have successfully flashed to JFD with a heimdall one-click. I could even root,use CWM and I have flashed a custom rom. BUT....it still wont detect in heimdall and odin still hangs. Im typing this post from the device using bionix v3 fishman. I wanted to throw ICS on here to check it out. But I know GB BLs are step 1. I have a jig so getting DL mode isnt an issue.
Sent from my SGH-T959 using XDA
Bump.... Just looking for a little help.
Sent from my SGH-T959 using XDA