i Just trolled myself with the 0x1000 - Atrix 4G Q&A, Help & Troubleshooting

9.Hit the "Start" button. RSD Lite will flash your phone. This process will be fairly quick, and your Atrix will reboot once or twice. After your Atrix boots back into Android, power down your phone and close the RSD Lite program on your PC (ignore the warning... the process is complete... if it wasn't complete, you would not be able to boot up into Android).
now after i did that i got the 0x1000 reading about it i saw it was a HARD brick my heart stopped for 1 minute , then i decided fck it follow the rest of the guide and i did oem unlock and it gave me the code and i used it and WTF IT WORKED!?! ALL THAT PANIC !!! FUUUUUUUUUU lolol is that normal? to get the 0x1000 error after doing that step 9? i did this with OTA gingerbread but all in all i went from that 0x1000 back to a normal UNLOCKED working gingerbread strange

Yes, this is normal when updating and is fairly well documented that the 0x1000 is a softbrick and normal step in re-unlocking the bootloader after an update to gingerbread. Running the fastboot unlock command again is all that is necessary.
0x1000 hard brick comes from flashing a downgrade sbf and this will look the same but does not provide any rsd or fastboot access. It is unfortunate that they come up as the same error because this causes a lot of confusion.

Related

Hard Bricked my atrix

I was following this video on instruction on unlocking my atrix on youtube titled "Motorola Atrix: Unlock and Upgrade to GB - Unlock P1"
My atrix was already updated to 2.3.4
Now Using RSD Lite.. idk what happened, the process failed.. and everytime I turn on my phone, it tells me "OS not found" or something like that.
It says:
SVF:105:1:2
Failed to boot 0x1000
NO OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1.RSD
2. Fastboot
3. NvFlash
4. BP HW Bypass RSD
5. BP HW BYPASS QC DLOAD
6. BP HW Diag & Boot AP
7. BP HW Bypass BP Only
8. BP SW Bypass RSD
9. Android Recovery
10. Boot Android (No BP)
11. Device UID
12 console=ttyS0, 115200n8
13. Early USB Enumeration
14. BP Tools
Can someone please help my get my phone working again.. I can't even live like a day without my phone. Is my phone hardbricked or is there any way to revive it?
Any help would be appreciated.
Thanks
try the next step
Just continue the fastboot commands and you should be fine, same thing happen to me
Sent from my MB860 using XDA App
Javi97100 said:
Just continue the fastboot commands and you should be fine, same thing happen to me
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Which fastboot commands, because I tried to use the ones such
fastboot flash preinstall preinstall.img
fastboot reboot
but nothing worked.
Try this
fastboot oem unlock
(Then it will give you a code, and type it again with code at the end)
Then when phones says unlocked
Type
fastboot reboot
Sent from my MB860 using XDA App
cpatel90 said:
Now Using RSD Lite.. idk what happened, the process failed.. and everytime I turn on my phone, it tells me "OS not found" or something like that.
It says:
SVF:105:1:2
Failed to boot 0x1000
Click to expand...
Click to collapse
Guys, where do you get the courage to do the unlock process that bricked so many phones without reading instructions?
When flashing pudding over OTA 2.3.4, Failed to boot is a common error.
You need to redo the fastboot unlock commands and all will be fine.
This is explained in the pudding thread, and gets explained every day again and again with each new thread that newbies create.
xploited said:
Guys, where do you get the courage to do the unlock process that bricked so many phones without reading instructions?
When flashing pudding over OTA 2.3.4, Failed to boot is a common error.
You need to redo the fastboot unlock commands and all will be fine.
This is explained in the pudding thread, and gets explained every day again and again with each new thread that newbies create.
Click to expand...
Click to collapse
Also if you do some looking around you'll find this http://forum.xda-developers.com/showthread.php?t=1182871 which I think was a SUPER easy way to unlock my bootloader and I didn't run into any of the issues that so many have ran into.
From unlocked/rooted GB Atrix
thanks for the help guys.. but i think its over for my phone.
it doesn't even turn on anymore. the green light comes on for one second and turns back off. i think i'll just have to get a new phone.
cpatel90 said:
thanks for the help guys.. but i think its over for my phone.
it doesn't even turn on anymore. the green light comes on for one second and turns back off. i think i'll just have to get a new phone.
Click to expand...
Click to collapse
You weren't a hard brick. You just didn't complete the steps. Did you do something else to it since your initial post? Sounds like your battery is drained, which means you need to charge it externally.
cpatel90 said:
thanks for the help guys.. but i think its over for my phone.
it doesn't even turn on anymore. the green light comes on for one second and turns back off. i think i'll just have to get a new phone.
Click to expand...
Click to collapse
uhh... sounds like your battery is drained. find someone who can charger your battery (another Atrix owner, or a Droid X owner) and try again PROPERLY.
you were trying to flash PREINSTALL to your phone? that is NOT the OS. that roots your phone once it's already installed. you need to install the SYSTEM.img and related files. you really need to read the entire guide as it so far looks like you didn't read anything.
you need to use moto-fastboot to flash System images, not regular fastboot.
http://forum.xda-developers.com/showthread.php?t=1138092
use these images and this guide, which coincidentally warns you NOT to RSD from the stock 2.3.4 and is stickied at the top of the dev forum.
http://forum.xda-developers.com/showthread.php?t=1160408
i seem to have hard bricked my atrix, doing the same thing.. well, my brother did anyway. but i somehow forced it to download mode. and re-flashed it. Works perfectly.
caleb4992 said:
i seem to have hard bricked my atrix, doing the same thing.. well, my brother did anyway. but i somehow forced it to download mode. and re-flashed it. Works perfectly.
Click to expand...
Click to collapse
that's a soft brick.
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
bivrat said:
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
Click to expand...
Click to collapse
Yea, thats a hard brick
Sent from my MB860 using XDA App
bivrat said:
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
Click to expand...
Click to collapse
bivrat,
You've asked this same thing maybe like 5 times already and each time we've told you that there is no fix and you have to get a new phone.
Need urgent reply
Guys.. i have a favour to ask!
m in a search for a second hand moobile and found this ATRIX 4G unlocked edition which has run into this problem!
"A recent Over The Air upgrade 2.3.6 to the phone (which should have been avoided on a rooted phone) has made the phone non working.
The phone does not boot, and displays the message:
Failed to Boot 1...
Entering RSD Mode."
Guys please let me know if this coud be fixed or not, as i am in a real mood to buy this one!
bivrat said:
svf :105.1:2
failed to boot 0x1000
show this..........
i cant to move it to android recovery cause there no option to move
after showing this error automatically switch off my phone.....
any solution
Click to expand...
Click to collapse
Did you try the Unlock v4.2 app from this site? Option 3 of the menu very well might fix it for you. Well worth a shot if you haven't tried it yet.

Hard brick after rsd

I was tried to unlock bootloader but after my phone showe there is no os detected i scared and luged my phone out then i got soft brick. I tried to recover it by this guide http://forum.xda-developers.com/showthread.php?t=991072 but after first step of rsd lite flashing i got hard brick/ RSD lite showed that it is turning my phone to BP by pass mode but then it showed error turning phone to BP by pass mode and stoped flashing after that my phone is hard brick. What can i do? please help
Can i send it to AT&T service to repair or change it i bought it from ebay two days ago.
Is your phone an international (non-US) model?
When your phone boots up, and you see the "Failed to boot" message at the top: Does it say "Entering NVFlash mode" quickly before shutting back down, or do you have a list of other options below?
brick?
RSD Lite seem connected? see if you still have a chance to heal: (
it is us model
It is not connect to rsd. When it turns on it shows nvflash mode. I asm searching a way to write a true script to install rom via nvflash by using nvidia apx drivers from lg tegra devices.
Could anyone help me with this. I am sure it is able to recover via nvflash and this wat is not published by motorola or nvidia. Because on another tegra device i use nvflash recover easily. It is verybig problem. Who will use motorola devices after that .....

[Q] Failed to boot1..

Hello everyone. If you try to unlock the boot flew error Failed to boot1 and now comes in a RSD Protocol, that would just rolled forward as the firmware and then restore the phone.
Pressing the rocker up and wrote this:
Failed to boot1
PwrReason: usb_cable
Starting Fastboot protocol support
I'll never know what to do next.
Del Post
mopss said:
Hello everyone. If you try to unlock the boot flew error Failed to boot1 and now comes in a RSD Protocol, that would just rolled forward as the firmware and then restore the phone.
Pressing the rocker up and wrote this:
Failed to boot1
PwrReason: usb_cable
Starting Fastboot protocol support
I'll never know what to do next.
Del Post
Click to expand...
Click to collapse
I just had this happen to me 2 weeks ago.
Your only option is to see if you can flash the derpunlock.sbf which is the pudding unlocked boot loader.
You should be able to user RSD Lite to flash.
Then follow unlock procedure.

[RESOLVED] Possibly bricked my Atrix 4g?

I am not necessarily a noob at this because I did a lot of this stuff on my old HTC Aria. But I was trying to unlock my BL doing 2.3.4 steps on 2.3.6 and I managed to get this error:
Code:
SVF: 105:1:2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Availible modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 BP HW Bypass QC DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery (NO BP)
Vol up to select, vol down for next choice.
Now I think what happened was that I didn't have my phone USB plug plugged into the back port instead I had it in the front one and caused it to fail.
Does anyone know if it's possible to save my phone, and if so what I could do to unlock boot loader for 2.3.6 or 4.5.141.
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
[EDIT] I forgot to do the fastboot oem unlock which resolved this issue. Phone says unlocked and everything!
i got the same problem u used the automatic unlock program.......my phone wont get detected my computer am using a laptop ////
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
AZNSNSAZN said:
I have a question. My friend has a Atrix 4G and I think He soft Bricked it. I took a look at it and I turns on then shows :
SVF: 105:1:2
Failed to boot 0x1000
then says something about svflash or etc and turns off right then and there. is there any way to fix this?
Click to expand...
Click to collapse
Looks like a hard brick. What did your friend do exactly? What firmware version he had and if he had tried to flash a SBF, what is the version of the SBF?
Share some more details so that we can narrow down on the problem.

[Q] Helpppp!!! Failed Root!!

So tried to root my uncle's Motorola Atrix 4g AT&T by using RSDlite, then when my phonr booted, It gave me
SVF : 105: 1 : 2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 ..... and so on and so forth...
I decided to flash the stock firmware back use RSDlite, by going into fastboot mode and try flashing it
But then it gave me and error :
Failed flashing process, Failed flashing process, una...
Can anyone help me with this please???
Your are Soft Bricked * Dont worry
You are currently Soft Bricked, I'm presuming you were already on GB 2.3.4/4.5.91.
Try this first --> http://forum.xda-developers.com/showthread.php?t=1182871
once you have Unlocked boot loader go ahead and flash SBF, if you want or else try flashing any GB/CM07/CM10 of your choice from recovery
terris98 said:
So tried to root my uncle's Motorola Atrix 4g AT&T by using RSDlite, then when my phonr booted, It gave me
SVF : 105: 1 : 2
Failed to boot 0x1000
No OS detected, going to RSD mode in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Bypass RSD
5 ..... and so on and so forth...
I decided to flash the stock firmware back use RSDlite, by going into fastboot mode and try flashing it
But then it gave me and error :
Failed flashing process, Failed flashing process, una...
Can anyone help me with this please???
Click to expand...
Click to collapse
Is the bootloader unlocked?. If it's it will say as unlocked when it displays 'Motorola Dual core' logo or with the series of message you mentioned in OP.

Categories

Resources