Ok I googled this and I saw other ppl have had similar problems and b4 any1 say anything I tried to do a search in this forum but I never could get any results...
My atrix was reading my sd card just fine up until yesterday when I removed it and put it into another phone... I turned the atrix off b4 I removed it but I didn't unmount it(idk if that matters when the phone is off tho) anyway the card wasn't recognized in the other phone when I put it in so I just put it back in the atrix but when I put it back the atrix didn't recognize it can anybody suggest anything I can do? I'm trying not to have to buy a new sd card but I will if that's the only option...
Help me please! I'm new to android I just switched from Windows Mobile and this is totally different...
Edit: Another question: I see there is an update 4.5.91 but I see a lot of ppl bricking their phone after updating...is it safe for me to update if I rooted my phone but did not flash a rom or do I need to do something else before updating?
Again sorry for my ignorance... I'm trying to learn so be patient with me please
I have tried OTA but it do not work. Best to use the pc to update ur atrix to 2.3.4.
Thanks for the reply... I did the update and it works fine(I did it ota)
Related
hey guys i need help i had android on my htc hd2 before but i deleted the folder out of my sd memory card and now i try to root android on my sd card and i have an error it would just boot to the logo HTC i try different rom and im running radio 2.14 could someone help me please i also reformat my sd card many time same thing still happening please help me out
I occasionaly get the same thing when trying a new WM rom. If you don't mind flashing your phone then do a task29 which you can find in some custom ruu programs to completely wipe the phone. then when you want to install the WM rom, unplug from usb, switch off.
Then press and hold volume down key and power button. You will boot into recovery mode. You can then install the fresh WM rom. Once installed copy the android folder back to the root of your SD card and boot up! I know its a long way and that you'll lose all data but it'll get your phone back up and running with any luck.
Mikeanywhere.
kkk imma try that to see if it works
same thing still happening i also try another sd card and im still having the same issue as before
dude, learn to use some punctuation. your post really just becomes blah blah blah
you are booting into windows just fine and booting android is the problem, or you can't get your phone to work at all?
if you're phone don't work, its a big issue that i'm not gonna touch. if its just android that isn't booting, just download a new version and go from there
+1 download a new build or another copy of the one you were using before....
if you dont let a build load properly during the first boot then it can corrupt some files I think.
I could be wrong but Im sure I read that somewhere.......
Hi,
I've already read a number of threads both on this forum and others, but need someone to point me in the right direction.
I recently installed Chewitts Dark theme and all was well, at this stage I became over confident and tried to install final simple theme also from this forum and this is where my problems started.
Once the simple theme had completed my phone started to a boot loop and i was gutted. I then tried PC suite and nothing, then after some reading I tried SEUS and it does not recognise my phone.
I can now get PC suite to recognise the phone, however it asks me to mount the SD card, which I can't do as the phone screen show a battery symbol with a flash through it.
I've found the following threads,
http://forum.xda-developers.com/showthread.php?t=683793 (seems complicated)
http://forum.xda-developers.com/showthread.php?t=776278 (seems simple)
but need help, I need something like an idiots guide please.....
what can I try next?
sannan06 said:
Hi,
I've already read a number of threads both on this forum and others, but need someone to point me in the right direction.
I recently installed Chewitts Dark theme and all was well, at this stage I became over confident and tried to install final simple theme also from this forum and this is where my problems started.
Once the simple theme had completed my phone started to a boot loop and i was gutted. I then tried PC suite and nothing, then after some reading I tried SEUS and it does not recognise my phone.
I can now get PC suite to recognise the phone, however it asks me to mount the SD card, which I can't do as the phone screen show a battery symbol with a flash through it.
I've found the following threads,
http://forum.xda-developers.com/showthread.php?t=683793 (seems complicated)
http://forum.xda-developers.com/showthread.php?t=776278 (seems simple)
but need help, I need something like an idiots guide please.....
what can I try next?
Click to expand...
Click to collapse
Fingers crossed I've sorted the problem..
Took the Sim and SD card out and tried SEUS again, this time it worked and only gave me the option to update software. I've just finished and all seems well.
Now i need to root and try and install another theme....
Thanks to all who have contributed to a number of threads on here....only by reading most of the comments was I able to solve my problem....
sannan06 said:
Fingers crossed I've sorted the problem..
Took the Sim and SD card out and tried SEUS again, this time it worked and only gave me the option to update software. I've just finished and all seems well.
Now i need to root and try and install another theme....
Thanks to all who have contributed to a number of threads on here....only by reading most of the comments was I able to solve my problem....
Click to expand...
Click to collapse
If anyone bricks their phone this does work. I picked the wrong flash last night and it looped my phone and removed Xrecovery. Tried Seus with sdcard installed still looped. Removed sdcard and tried again. Works perfectly. Seus installed 2.1 generic.
Close call. Don't try to flash phone after working 14hr days. Lesson learned.
Hi all, I hope somone can help me, I have a TMobile UK Samsung GS2, I have it unlocked and rooted for some time now and have been happily flashing custom ROM's with no problems but a couple of days ago after flashing and update to my current ICS ROM, I am no longer able to connect it to a PC I get an error message saying the device is unrecognised, I have tried 3 different PC's and 3 different cables, I even tired a MAC! I have rolled back to a previous ICS version via nandroid backup and that does not work, I even rolled back to a GB version of a nandroid backup and still no joy, I have tried pretty much every wipe option available and installed from new, it still does not connect, if I boot into download mode odin does not pick it up, Kies does not pick it up, I have an hdmi adapter to plug into my TV that does not work anymore as well as an adapter to connect a flash drive and although the power light on the flash drive shows up the device does not show on the phone, I can charge the phone however. I have posted on the ROM forum on XDA and the guys there have tried to help mainly by different wipe options but nothing has so far worked.
I noticed while experimenting with different kernels that the back around the camera would get very hot, I wonder if something has burnt out, if I am going to try and send it back to TMobile under warranty I guess I need to flash a stock ROM and would have done this through Odin but that is not an option
Does any of you genii out there know how I can fix this?? I am not such a newb and work in IT so have a gut feeling it is a hardware problem that is not easy to fix however one of you may know what to do.
Thanks in advance.
You could use mobile odin to flash the stock rom back, it sounds like your micro usb connector has gone faulty, its a common fault with the Galaxy S2.
I already answered you in your other post.
Please don't double post. (forum rule #5)
ctomgee said:
I already answered you in your other post.
Please don't double post. (forum rule #5)
Click to expand...
Click to collapse
Sorry about that I originally posted here then saw that it was probably the wrong forum, so I reposted, can I remove this one??
Ok guys after hours of wiping a flashing I have got to the bottom of my problem, I tired cleaning the usb port on the phone as suggested in the general forum and tried installing some mobile dev tools from microsoft, neither of which seemed to work, although I did manage to blow quite a bit of dust out with the compressed air!! Then I read a post where one guy was doing all his flashing without the sim and sd card installed, so I took both of them out and would you believe it I plugged my phone into my PC in download mode and odin picked it up! to I booted the phone plugged it back into the PC and voila it picked up the phone without errors as a mass storage device!! , I put the sim back in and tired again, picked up mass storage device again!! , so I figure my sandisk 64gb micro sd card has become corrupt, I have backed it up and formatted it in CWM and now that is picked up too!!! will transfer the data back over to it to be sure it is fine.
I wanted to say a big thanks to all who have offeed advie and help, especially nickmax1, cooza, ger5, daclaus and of course indie for his great rom, I lost the faith for a while there but have it back now thanks to you guys, it is a pleasure to be part of this great community.
Cheers all
So i'm new to this phone and moto phones altogether. I had rooted, put 2.7twrp on, and then flashed a couple roms tonight after getting the phone earlier today. I just went into recovery and thought since I don't have much space on the internal sd I would erase the stock rom and now the phone wont boot even though i flashed liquid smooth. I've never heard of a phone having two roms on it and definitely didn't know not to delete the stock one on this phone. Is there any way to fix this? Please tell me there is because the only reason i'm using this is because i bricked my lg g2 last week so my sister is letting me use her razr and now i've bricked it! I'm hoping there is a fix :/ thanks to whoever bothers.
I think i got it fixed.
I'm able to use the button combo to get the screen where i can choose recovery or fastboot and whatnot so I'm thinking I can fix this phone but I'm not sure what to do. All the threads seem to be for the xt910. can someone please show me what thread to use to fix this phone.
got it fixed
used this http://forum.xda-developers.com/showthread.php?t=2192467 and option 1 to fix it. Already had used this to root and later realised I could use it to recover a soft brick.
This is for verizon XT912 users
Please help me ! :'( .....My LG L90 D415 got bricked because of me wanting to make my external sd card to internal storage, so i've searched that i can do that in my CM 13 rom, so formatted my sd card as internal just like they said, (luckily, i backup all my data) so when it's trying to format may sd, my screen just went black...so i searched what went wrong, and they said i have to use partition manager , and wipe the partitions and create a new one....so i did that, with eusus partition manager, and i created one, but the screen black, so i thought i need to restart it, so i did....but when i press the power button long enough, it's still not booting, so i thought the battery is dead...then i charged it, but no charging display is showing, it cant be that dead...so i waited and look, still no charging display...that's when i realized i screwed up and bricked my only phone so i tried the method: brbsupportlg .....my phone is recognised by my laptop there's a relink.....and bulk drivers installed when i plugged my lg....then i followed the intructions clearly..click start : the following error showed up: device not found in dload trying flash programmer....bad luck just keeps coming dont they :'( so please can someone help me, this is my only phone....and i can't survive without it.
p.s im not gonna buy another phone, i know you guys can help me :'(
I don't know who told you that you can do that but that option was only added in android 6.0 and doesn't really work well at all. You will have to release stock from download mode and start all over again.