i want to install the [ROM] Cyanogen Froyo CM6-Latest (based on MiniCM) – v6.01 on my xperia mini pro but i am having some problems with the installation i rooted my phone and i install the xrecovery after i install the cwn recovery and i install the rom but i get Stuck in boot screen and i waited like 25 five minutes and nothings hapen...and i dont know what i have to do i really want the cyanogen rom...can some body help me ?
Try doing a factory reset before you flash to a custom rom
Sent from my U20i using XDA Premium App
hello i have a question..today i tried to install the [ROM] Cyanogen Froyo CM6-Latest (based on MiniCM) – v6.01 on my xperia mini pro u20a---2.1.1.A.0.6 and base band m76xx-tsncjolym-53404015, i rooted my phone and i install the xrecovey, i enter to xrecovery and before installing the room i did a wipe batery stats and a factory reset full wipe and after i install the room i reboot my phone and i get Stuck in boot screen i waited like a 25min and nothing,i took out the batery and i restart the phone and i tried to enter again to the recovery but now i enter to cwn recovery not to xrecovery i tried to install again the rom with the cwn but i get stuck in boot screen again what i did wrong do i have solution i really want that room...after i recover my cellphone with Update service
Related
Hi guys,
i have decided that i install new ROM to my device.
Device :
xperia x10 mini pro, U20i, 2.1-update1, 2.1.1.A.0.6
My device is ROOTed - i have used SUPER ONE CLICK, i have installed BUSYBOX from the Market, and i have got xRecovery.
I have downloaded ROM - http://forum.xda-developers.com/showthread.php?t=1059361
I have copied it to my SD card, turn off the phone,turn on the phone,on the SE logo i have touched BACK button => i get into xRecovery.
I have update .zip file from sd card- everything done. Reboot device. (i have tried- wipe cache, -factory reset, -reboot, but problem still last)
Device has turned off, turned on, there was SE logo, than just black display, so i have waited long time - about 20-25 minutes, but there was still just black display, phone simetimes vibrated but nothing else.
I have restored my system using xRecovery.
Please help me somebody,i want this ROM but i can not do that.
Sorry form my english.
Do it again staring with any back ups ,,, if not seus when you get to a rom choose a more stable rom ,,, like slade 5 or cm7
Sent from my U20i using XDA Premium App
Install CM6 V6 after installation CM6 V5
Problem black screen
Hi i have the same like friend under me.
I trying install cm6 v5 and latter cm6 v6 .
but this is not change anything.
during booted after sonyericsson logo, i have black screen and sometimes vibrate.
sorry for my language, but my national language is polish, english is learning
Hi guys !
I have installed v.5 .That version works correctly. I have tried to install v. 6 after v.5 but that brokes again at SE logo after reboot.
I want to ask, how get i Hotfixes to the system ? I have downloaded Hotfix .zip files, but i do not know how i should apply that.
Thanks
You can install Hotfixes through CWM or xRecovery. Just go to option instal custom zip and choose the Hotfix you want.
NihilisticWonder said:
You can install Hotfixes through CWM or xRecovery. Just go to option instal custom zip and choose the Hotfix you want.
Click to expand...
Click to collapse
I have tried to do it. But it can not install Hotfix, that notices some error, i have tried two, or three Hotfixes, but that still notices some error.
I have read that there can be some problems with installing .zip files, i have found it in FAQ ( http://forum.xda-developers.com/showthread.php?t=1066824 )
"
I CAN'T INSTALL CUSTOM.ZIP ON CWM RECOVERY BUT WITH XRECOVERY I CAN...
This script it's amend script, so it need to be translated to edify script for work on CWM recover
"
This should be my problem, i think...
How can i translate script to work in CWR ?
Thx
BOSSno.21 said:
Hi guys !
I have installed v.5 .That version works correctly. I have tried to install v. 6 after v.5 but that brokes again at SE logo after reboot.
I want to ask, how get i Hotfixes to the system ? I have downloaded Hotfix .zip files, but i do not know how i should apply that.
Thanks
Click to expand...
Click to collapse
Well V6 is clockworkmod recovery flashable only!
galvic said:
Well V6 is clockworkmod recovery flashable only!
Click to expand...
Click to collapse
So, i do not understand. That brokes in CWM when i have tried to apply Hotfix. CWM notices some script problems.
I am going to try it again later.
As you did with the rom, use EXACTLY the same procedure except the wiping (wipe cache, battery stats, factory reset).
That's how you install a hotfix
I am using xperia x10 mini I update my rom to cm7 2.2, rooted suuccessfully before updating, unlock bootloader successfully, flash nAa kernel,backup data,wipe data, install cm7 zip file from sd card,install gapps from sdcard successfully, but it will not work. it is not switched on show only logo(freedom within nAa kernel) and switch off then switched on show logo, repeatedly.For switching off i have to press back button when logo appear and go to power off. What can I do? Please help me.
Flash nAa 11 kernel from here
The kernel you flashed is ONLY for ICS roms, currently only working with the miniCM9 rom, the rom you have is a gingerbread.
Good luck
I am using Sony W8 with stock kernel. When I tried to install the Ginger DX v029, problems occured. I used CWM to install this rom with following steps:
1. Install custom rom -> reboot phone. Unfortunately, my phone got freeze when it booted to the gingerdx icon. I tried to reinstall many times but the problem was not solved.
2. wipe out-> install custom rom-> reboot. This time, the phone can boot to the main menu but the system file "has stop working"
Anyone know about these problems? Please help me!
Can anyone help me pls!!!
convevn said:
I am using Sony W8 with stock kernel. When I tried to install the Ginger DX v029, problems occured. I used CWM to install this rom with following steps:
1. Install custom rom -> reboot phone. Unfortunately, my phone got freeze when it booted to the gingerdx icon. I tried to reinstall many times but the problem was not solved.
2. wipe out-> install custom rom-> reboot. This time, the phone can boot to the main menu but the system file "has stop working"
Anyone know about these problems? Please help me!
Click to expand...
Click to collapse
I think u must flash ur phone with a kernel specially made for the custom rom u have installed..!
I hope if it could work!:good:
i want to install the CM10 on my X10 MINI
so first i Flashed the NAA JB
then it says go to recorey and install the CM10
i cant do it
its boot looping to me the photo of the kerenal and i cant go to recovery....
some 1 know what to do??
Power on.
Then keep bashing the back key.
First..Flash the nAa14 kernel..Go to CWM, Full wipe , Install the MiniCM10 and gapps..Once installed power off the phone..Flash the nAa-JB kernel..Once can boot..go to CWM again..Full wipe..Install again the rom and gaaps.
Reboot..DONE!
Vince.
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh: