I am using xperia x10 mini I update my rom to cm7 2.2, rooted suuccessfully before updating, unlock bootloader successfully, flash nAa kernel,backup data,wipe data, install cm7 zip file from sd card,install gapps from sdcard successfully, but it will not work. it is not switched on show only logo(freedom within nAa kernel) and switch off then switched on show logo, repeatedly.For switching off i have to press back button when logo appear and go to power off. What can I do? Please help me.
Flash nAa 11 kernel from here
The kernel you flashed is ONLY for ICS roms, currently only working with the miniCM9 rom, the rom you have is a gingerbread.
Good luck
Related
i want to install the [ROM] Cyanogen Froyo CM6-Latest (based on MiniCM) – v6.01 on my xperia mini pro but i am having some problems with the installation i rooted my phone and i install the xrecovery after i install the cwn recovery and i install the rom but i get Stuck in boot screen and i waited like 25 five minutes and nothings hapen...and i dont know what i have to do i really want the cyanogen rom...can some body help me ?
Try doing a factory reset before you flash to a custom rom
Sent from my U20i using XDA Premium App
hello i have a question..today i tried to install the [ROM] Cyanogen Froyo CM6-Latest (based on MiniCM) – v6.01 on my xperia mini pro u20a---2.1.1.A.0.6 and base band m76xx-tsncjolym-53404015, i rooted my phone and i install the xrecovey, i enter to xrecovery and before installing the room i did a wipe batery stats and a factory reset full wipe and after i install the room i reboot my phone and i get Stuck in boot screen i waited like a 25min and nothing,i took out the batery and i restart the phone and i tried to enter again to the recovery but now i enter to cwn recovery not to xrecovery i tried to install again the rom with the cwn but i get stuck in boot screen again what i did wrong do i have solution i really want that room...after i recover my cellphone with Update service
i want to install the CM10 on my X10 MINI
so first i Flashed the NAA JB
then it says go to recorey and install the CM10
i cant do it
its boot looping to me the photo of the kerenal and i cant go to recovery....
some 1 know what to do??
Power on.
Then keep bashing the back key.
First..Flash the nAa14 kernel..Go to CWM, Full wipe , Install the MiniCM10 and gapps..Once installed power off the phone..Flash the nAa-JB kernel..Once can boot..go to CWM again..Full wipe..Install again the rom and gaaps.
Reboot..DONE!
Vince.
hello this is my first aid, suffer some devices fail.
corruptea SD card, and you can not flash a rom.
eg
you use a CM9 rom ics (achojan) normal
after flashing the kernel CM10 (scricht007)
You can no longer re-flash the CM9 rom ever.
I tried to give him a hard reset xperia x10, unlock the bootloader, I downgraded the firmware to gb, micro sd've changed, and nothing has given me solution, I could not install a CM9 rom. all is not lost.
solution:
lock the boot loader
use seus, update firmware, to gb.
open, FlashTool. 2.1 flash rom piece, the phone normally.
turn off the phone, and open seus updates the firmware to gingerbread
root to mobile
unlock the bootloader
flash the custom kernel, and enjoyment.
achojan rom flash kernel v6 feravolt
sorry for my bad English (google translate)
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
rho57 said:
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
Click to expand...
Click to collapse
Maybe you got your kernel and rom from the wrong place. If you have an X10MiniPro make sure you get kernel and rom from the x10minipro section too, and not from the x10mini section. Although the phones seem similar apart from the keyboard, they do have a different digitizer too.
rho57 said:
Hi, I tried installing a custom rom on my x10 mini pro. I did rooting, unlocking bootloader, and flashing custom kernel right (I also did it on my x8). I attempted to install gingerDX v31b under nAa 14 kernel. After flashing the rom and rebooting to system, the phone keeps getting stuck on nAa logo and then it restarts, gets stuck on nAa logo and restarts again.
I also tried flashing naa jb kernel and a jb rom, and i still get the same results. What could be the problem and how will I be able to fix it?
Click to expand...
Click to collapse
On which kernel are you now? If you're on a JB kernel, make a full wipe ( data,cache,dalvik-cache,system), install a GB Kernel and then install GDX. If you're on a GB kernel, also make a full wipe and then install GDX. Of course, make sure youre using the right ROM and kernel for your device.
Please press thanks if I helped .
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh: