Overclocking - HTC EVO 3D

Ive been running at 2050 with no issues. Just curious if anyone is running higher amd their results or feedback.....
Sent from my PG86100 using XDA App

over 9000!!!!

derekfaircloth said:
Ive been running at 2050 with no issues. Just curious if anyone is running higher amd their results or feedback.....
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Which kernel you on?
Sent from my PG86100 using XDA App

NewZJ said:
over 9000!!!!
Click to expand...
Click to collapse
I call bs on 9000.
I get boot loops if I OC over 7000!
Sent from my PG86100 using Tapatalk

Yeah, 6969000 is as high as I get before the bootloops.
/sarcasm
In all seriousness, what kernel/ROM are you getting 2050 with? I can't get past 1728 without it being a little choppy.
ViperROM with nets kernel.

Bamba1260 said:
Yeah, 6969000 is as high as I get before the bootloops.
/sarcasm
In all seriousness, what kernel/ROM are you getting 2050 with? I can't get past 1728 without it being a little choppy.
ViperROM with nets kernel.
Click to expand...
Click to collapse
that's as high as I can go to, if I go higher than 1728 i get boot loops

8.2GHz for me......
Oh wait that was on my computer.
Anything over 1.8 and i bsod and have to battery pull.

Related

Freeza

Da man,
Any chance you can get the dual core working with aosp?
Sent from my PG86100 using XDA App
I"ll try, hold on a sec.
Flash in recovery. Post back results
Lol
Sent from my PG86100 using XDA App
Just throw the same file in the same folder. Etc/init.d
File below.
http://db.tt/PSauGH9Z
"DU4L C0R3 SH00T3R"┌П┐[◣_◢]┌П┐
http://goo.gl/v6NqW iTz_r0cky!
r0cky0790 said:
Just throw the same file in the same folder. Etc/init.d
File below.
http://db.tt/PSauGH9Z
"DU4L C0R3 SH00T3R"┌П┐[◣_◢]┌П┐
http://goo.gl/v6NqW iTz_r0cky!
Click to expand...
Click to collapse
That too
You da man as always freeza. I must of missed that whole thread somewhere. Sorry but thanks for posting
Sent from my PG86100 using XDA App
Oh yea both cores at 1.8 on aosp. Blazing
Sent from my PG86100 using xda premium
sprintuser1977 said:
You da man as always freeza. I must of missed that whole thread somewhere. Sorry but thanks for posting
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
No worries
sprintuser1977 said:
Oh yea both cores at 1.8 on aosp. Blazing
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Glad it's working.
Awesome Freeza. Will this also work with MIUI? I'm about to try it with CM7. I'm pretty new to non-Sense roms, so I'm not sure which roms are AOSP other than CM7.
Im using on cm7 with no probs yet. Been running both at 1.8 for several hrs and no reboots,freezing or any other issues. Loving it
Sent from my PG86100 using xda premium
freeza said:
I"ll try, hold on a sec.
Flash in recovery. Post back results
Click to expand...
Click to collapse
Hey Freeza, is this a kernel or a mod?
Also how do you control the frequency of the second core?
Thanks for all your work man.
Do you seriously see any difference with the second core turned on?
I don't think I notice anything except more instances or hitching and lagging. Run a quadrant with and without dual core enabled cause mine don't change field the better typically.
poweroutlet said:
Hey Freeza, is this a kernel or a mod?
Also how do you control the frequency of the second core?
Thanks for all your work man.
Click to expand...
Click to collapse
You have to edit a certain file through root explorer to change 2nd core speed. I dont recall the name of the file but there is a thread in the mods and themes section by freeza about this
Dual core speed freak
LurkerJoe said:
Awesome Freeza. Will this also work with MIUI? I'm about to try it with CM7. I'm pretty new to non-Sense roms, so I'm not sure which roms are AOSP other than CM7.
Click to expand...
Click to collapse
Should work. Let me know if it does for sure.
poweroutlet said:
Hey Freeza, is this a kernel or a mod?
Also how do you control the frequency of the second core?
Thanks for all your work man.
Click to expand...
Click to collapse
You'd need to edit /system/etc/init.d/10dualcore (since this is for AOSP and to take effect every boot), or /sys/devices/system/cpu/cpu1/cpufreq/scaling_freq_max for it to take effect manually.
felacio said:
Do you seriously see any difference with the second core turned on?
I don't think I notice anything except more instances or hitching and lagging. Run a quadrant with and without dual core enabled cause mine don't change field the better typically.
Click to expand...
Click to collapse
I see a significant increase in system/app responsiveness and all lag (aside from apps that just can't help but lag, and not processor related) is virtually non-existent. I'm also using this on the stock kernel, so I'm not overclocked and it is working out fantastically. Around 5 days uptime right now and counting.

Need spec poll for what makes photons act different

I need as many people to post this terminal output
Cat /sys/ram/info
Also include if you have trouble with 1.4 oc kernels.
Sent from my MB855 using XDA App
Hynix-54nm:LPDDR2:x16:S4:1GB
Same here
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
same, no issues 1.4 oc
I know of one photon thats not that RAM and it is one that wont oc to 1.4 well. So I need to get a poll to see if we really do have two different chips. If so then guys with the 1.4 issues can be fixed with some changes to my source.
jrebo said:
same, no issues 1.4 oc
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
No
criptix said:
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Hynix-54nm:LPDDR2:x16:S4:1GB
Sent from my MB855 using Tapatalk
Hynix-54nm:LPDDR2:x16:S4:1GB
Tried 1.4 newest test no issues with a couple of them.
Elpida-40nm:LPDDR2:x16:S4:1GB
My Photon reboots on its own while sleeping using both new CM kernels. I can over clock to 1.4. Works fine with the Quark kernel.
Miquiztli said:
Hynix-54nm:LPDDR2:x16:S4:1GB
haven't tried the 1.4oc yet
Click to expand...
Click to collapse
Same here.
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
This, and 1.4 works.
Sent from my MB855 using xda premium
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
Same here
Sent from my MB855 using Tapatalk
Cat /sys/ram/info
Also include if you have trouble with 1.4 oc kernels.
Be sure to state if your phone works or doesn't work with the 1.4 OC kernels. If you don't list this or have never tried the 1.4 kernel then it doesn't help joker.
Hynix-54nm:LPDDR2:x16:S4:1GB$
All 1.4 kernels seem to be flaky for me. The latest two that you uploaded on the 20th booted, but would reboot in a minute or two. Kinda reminded me of my first photon before I took it back. Sometomes it would randomly reboot and sometims it would sleep of death on me.
I am using the CM7 variants.
1.3 has been rock solid since I installed it.
Sent from my MoPho. All typos are the phones fault.
So which is the flaky chip joker?
Sent from my Motorola Electrify using xda premium
criptix said:
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
Click to expand...
Click to collapse
This is the output I got.
Its not that ones flaky, its that i didnt know we had two photon chips. The hynix is timed better but doesnt oc well without voltage. The other oc's without voltage but wasnt set right in source. The atrix uses elipia(whatever) and is properly set for lpddr2-667. The photon is lpddr2-600 with lower timing. Ive got to set both individually and hope both are timed right. Better memory oc will equal better cpu oc to a point. Thats one reason the atrix oc's a little better. But they have heat issues. Im hoping for at least 333 stable with 400-450 hardcore. If timing is off youll notice the phone slowing down. This is why i need it tested. But only the hynix is tweaked timing wise.
criptix said:
So which is the flaky chip joker?
Sent from my Motorola Electrify using xda premium
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Hynix-54nm:LPDDR2:x16:S4:1GB
Sent from my MB855 using XDA App
criptix said:
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
Click to expand...
Click to collapse
same here
........................

The New Kernel

Just dropping a line mentioning it; the new kernel has the same battery life in my use. It does make things even a little bit more smoother and runs a touch cooler over the older ICS kernel, as the cpu is always scaling back and forth constantly.
Really REALLY need kernel source.....
My phone is also running cooler with the new kernel. I am also getting a stronger wi-fi signal with the new RUU.
I installed Micro CPU Monitor to see what the processor is doing. I'm stock on the latest leak with no problems. It does seem to bounce around a bit, but at least it isn't all or nothing. I also noticed when doing nothing it kinda stabilizes at a low value.
https://play.google.com/store/apps/details?id=com.bb.microcpu
Sent from my ADR6425LVW using xda premium
Snuzzo said:
Just dropping a line mentioning it; the new kernel has the same battery life in my use. It does make things even a little bit more smoother and runs a touch cooler over the older ICS kernel, as the cpu is always scaling back and forth constantly.
Really REALLY need kernel source.....
Click to expand...
Click to collapse
Don't use SetCPU to monitor it's speed, use a tool that only monitors the speed that can't change it. With SetCPU, you see the perflock kicking in and changing the minimum value.
I do agree, once we have source we can get some kernels out with perflock disabled and have better control over them.
Here's more on the topic - http://forum.xda-developers.com/showpost.php?p=25667520&postcount=301
jbh00jh said:
My phone is also running cooler with the new kernel. I am also getting a stronger wi-fi signal with the new RUU.
Click to expand...
Click to collapse
Same here. My wifi sucked before. I was getting the same downliload speeds as on 3g. Now I get at least double that, its cooler, and I'm getting better battery life
Sent from my ADR6425LVW using XDA
I am finding this latest leak is more stable and the phone is running much cooler. I have no facts to base this statement on, other than how the phone is running when I'm using it. There are definitely less hiccups and my data connection appears much more solid.
I agree. Better life and cooler. But it does seem a little more laggy sometimes
Sent from my ADR6425LVW using xda premium
So I'm s-off on first ics leak, can I just flash this kernal since this is all that was improved in the new leak that actually matters to me. Thanks
Sent from my ADR6425LVW using Tapatalk 2
evilstewie23 said:
So I'm s-off on first ics leak, can I just flash this kernal since this is all that was improved in the new leak that actually matters to me. Thanks
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Yup. I took the zip from Nilsp's thread and flashed it. It rebooted to bootloader to allowed a PH98IMG flash. Unsure what effects it would have with doing a "fastboot flash boot" command.
Snuzzo said:
Yup. I took the zip from Nilsp's thread and flashed it. It rebooted to bootloader to allowed a PH98IMG flash. Unsure what effects it would have with doing a "fastboot flash boot" command.
Click to expand...
Click to collapse
So I can't do it in recovery cuz I'm soff
Sent from my ADR6425LVW using Tapatalk 2
evilstewie23 said:
So I can't do it in recovery cuz I'm soff
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Not yet, I think the only rom that has this kernel included is CleanRom.
antp121 said:
Same here. My wifi sucked before. I was getting the same downliload speeds as on 3g. Now I get at least double that, its cooler, and I'm getting better battery life
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Interesting, my wifi wouldn't work at all. Had to go back to earlier leak
Sent from my ADR6425LVW using XDA
liquid4life said:
Interesting, my wifi wouldn't work at all. Had to go back to earlier leak
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Again, mine liked the leak. Im getting about the same battery life. It just runs cooler.
liquid4life said:
Interesting, my wifi wouldn't work at all. Had to go back to earlier leak
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Did you flash the one in my ICS ROM thread?
It has both parts and flashes in recovery for the lib then boots to bootloader to flash the boot.img
ill post my exp. i got the same battery life if not worse onthe new kernal. went back to stock gb. i hope this is fixed cause i love the look and feel of ics
liquid4life said:
Interesting, my wifi wouldn't work at all. Had to go back to earlier leak
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
You have to flash the wifi module also.

Post your highest quadrant score!

Here's mine
Two horses in a man costume
This is with caprom how did you get your score 3800? which rom do you use it?

			
				
quadrant doesnt mean anything .. lol and ops is outdated quadrant too
ed116 said:
quadrant doesnt mean anything .. lol and ops is outdated quadrant too
Click to expand...
Click to collapse
shhhh!
I wish I still had my glaciers 3300 screen saved... That would end it
Sent from my HTC_Amaze_4G using Tapatalk 2
This is mine. Was better the other day before injumped in the pool with my trusty Amaze.
Sent from your mom's bedroom using XDA app
ed116 said:
quadrant doesnt mean anything .. lol and ops is outdated quadrant too
Click to expand...
Click to collapse
Quadrant, or any benchmark, CAN mean something if you're constantly hacking your phone and want to see the effects. Comparing it to someone else's is tricky because no test can represent how you use the phone in actual situations.
You can turn off journaling on partitions and get an immediate jump. You can update the video driver, force hardware renering. Heck, you can even create a ramdisk and simlink all your files, too.
To me, everything is a trade-off. You gain performance by reducing security, battery life, memory/storage space, or whatever your mod does to it.
But I admit it's fun!!
Has anyone benchmarked read/write speed of the data partition yet? I want to compare it to my class 10 sd card to see if it's worthwhile to move some files around or not.
Oh, by the way, if you want to brag about high scores, you should use the older version (I think it was 1.x) of Quadrant as it reported higher scores. Time to dig out the backups!
mahgninnuc93 said:
This is mine. Was better the other day before injumped in the pool with my trusty Amaze.
Sent from your mom's bedroom using XDA app
Click to expand...
Click to collapse
Hope you recovered it completely. When I did it and revived it, my screen had a small stain/fog for a long time, then, one day, I noticed it disappeared completely.
mahgninnuc93 said:
This is mine. Was better the other day before injumped in the pool with my trusty Amaze.
Sent from your mom's bedroom using XDA app
Click to expand...
Click to collapse
Hopefully it doesn't become your rusty amaze. =)
What are everyone's thoughts on Vellamo? Kind of prefer that one myself. I aggree that most benchmarks can be inaccurate... But they're cinsistant enough that they're still effective for testing one phone to the other, or one Rom to the other in my experience.
Sent from my HTC_Amaze_4G using xda premium
mrmako777 said:
shhhh!
Click to expand...
Click to collapse
hengsheng120 said:
Click to expand...
Click to collapse
WTF!!!
ziggy46 said:
WTF!!!
Click to expand...
Click to collapse
It's a tablet most likely... He must have posted in the wrong forum
Sent from my HTC_Amaze_4G using Tapatalk 2
glacierguy said:
It's a tablet most likely... He must have posted in the wrong forum
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
I was gonna say! Lol
Sent from my HTC_Amaze_4G using Tapatalk 2
hengsheng120 said:
Click to expand...
Click to collapse
WTF dude? Are you sure your phone didn't catch fire or start a nuclear fusion?
In all seriousness, what'd you do to achieve that score? I must know your secret!
photoshop!

[Q] What is your best Antutu Benchmark Score?

My best score, so far, is
What's yours?
I'm running Moonshine S-OFF, Antutu Overclock, LK Kernel.
21209
kushmacdaddy said:
21209
Click to expand...
Click to collapse
How did you manage that, if you don't mind me asking?
Amer28 said:
How did you manage that, if you don't mind me asking?
Click to expand...
Click to collapse
Cm 10.1 and crpalmers kernel
Viper ROM + BM kernel
Sent from my HTC6435LVW using Tapatalk 4 Beta
19367
Gotta love the DNA
Sent from my HTC6435LVW using xda premium
kelvinnotcalvin said:
Viper ROM + BM kernel
Sent from my HTC6435LVW using Tapatalk 4 Beta
Click to expand...
Click to collapse
What setting did you use for that?
Sent from my HTC6435LVW using Tapatalk 4 Beta
Technogen said:
What setting did you use for that?
Sent from my HTC6435LVW using Tapatalk 4 Beta
Click to expand...
Click to collapse
Lionheart, row, 2048 cache, and overvolted +50mV above 1.51ghz. I'm binned nominal. I only ever get this after a reboot too. The overvolt doesn't really affect battery life either. Getting 5 hours screen on time on avg with 17 hours standby
Sent from my HTC6435LVW using Tapatalk 4 Beta
DNA | ⓣⓐⓟⓐⓣⓐⓛⓚ | TF300T
Sent from my HTC6435LVW using xda app-developers app
Curious. Has anyone else ruin into this problem? Ran a test once, worked, but if I try to run it again it auto shuts off at 1%
Any ideas?
Sent from my HTC6435LVW using xda premium
Amer28 said:
I'm running Moonshine S-OFF, Antutu Overclock, LK Kernel.
Click to expand...
Click to collapse
Just being nitpicky here, but your not technically "running" moonshine soff. Its just a method to gain soff, not something that runs on a phone that could contribute to benchmark scores outside of allowing you to overclock and run a custom kernel.
Serinety said:
Just being nitpicky here, but your not technically "running" moonshine soff. Its just a method to gain soff, not something that runs on a phone that could contribute to benchmark scores outside of allowing you to overclock and run a custom kernel.
Tapatalk Beta
Click to expand...
Click to collapse
Well, if we are going to be 'nitpicky,' I never mentioned that moonshine contributed to the benchmark score although it did make everything else possible (such as Sense 5 and a custom ROM) - so I thought it 'deserves' a mention.
Further, still going with 'nitpicky,' the correct way to say is you're not technically.. not as you said "your not technically 'running'...".
Anyway, I just recently tried the Beastmode ROM and have gotten a solid 19K.
UchihaKite said:
Curious. Has anyone else ruin into this problem? Ran a test once, worked, but if I try to run it again it auto shuts off at 1%
Any ideas?
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
I use antutu to test out cpu voltages. So I've definitely seen this auto shutoff. If antutu cuts off, i add more voltage.
Sent from my HTC6435LVW using Tapatalk 4 Beta
kelvinnotcalvin said:
I use antutu to test out cpu voltages. So I've definitely seen this auto shutoff. If antutu cuts off, i add more voltage.
Sent from my HTC6435LVW using Tapatalk 4 Beta
Click to expand...
Click to collapse
When I have tried to change that, it says my kernal doesn't support it
Sent from my HTC6435LVW using xda premium
kelvinnotcalvin said:
I use antutu to test out cpu voltages. So I've definitely seen this auto shutoff. If antutu cuts off, i add more voltage.
Sent from my HTC6435LVW using Tapatalk 4 Beta
Click to expand...
Click to collapse
I attached my latest score, 19.2k.
I was wondering about voltages, I'm running Nos M7 with BM (Nos Repack). I don't see a way to change the voltages, do I need a different app for that? I have SetCPU Pro and Antutu Overclock Pro. In neither of them can I change voltages. I also noticed if I do anything higher than 1672Mhz, it freezes and shuts off. I'm sure with the changes to the voltages, I'd be able to get a higher clock. I'm just not sure where I can change that..?
Amer28 said:
I attached my latest score, 19.2k.
I was wondering about voltages, I'm running Nos M7 with BM (Nos Repack). I don't see a way to change the voltages, do I need a different app for that? I have SetCPU Pro and Antutu Overclock Pro. In neither of them can I change voltages. I also noticed if I do anything higher than 1672Mhz, it freezes and shuts off. I'm sure with the changes to the voltages, I'd be able to get a higher clock. I'm just not sure where I can change that..?
Click to expand...
Click to collapse
I use system tuner pro for voltage control. I've never used set cpu pro or the antutu one. Maybe post something in the kernel thread for BM cuz i'm not sure why u wouldn't be able to set ur voltage with SetCPU. Maybe has to do with it being a Nos Repack (not really sure what that means)?
Sent from my HTC6435LVW using Tapatalk 4 Beta
Most all of these variances are thermal/throttling related. Play around with your thermal settings if you know how and really care about these silly scores. I can hit 22k on stock kernel repeatedly after making some thermal tweaks.
Not to brag but....
sent from my DNA
14458 for mine.
Sent from my HTC Droid DNA using xda premium

Categories

Resources