I need as many people to post this terminal output
Cat /sys/ram/info
Also include if you have trouble with 1.4 oc kernels.
Sent from my MB855 using XDA App
Hynix-54nm:LPDDR2:x16:S4:1GB
Same here
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
same, no issues 1.4 oc
I know of one photon thats not that RAM and it is one that wont oc to 1.4 well. So I need to get a poll to see if we really do have two different chips. If so then guys with the 1.4 issues can be fixed with some changes to my source.
jrebo said:
same, no issues 1.4 oc
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
No
criptix said:
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Hynix-54nm:LPDDR2:x16:S4:1GB
Sent from my MB855 using Tapatalk
Hynix-54nm:LPDDR2:x16:S4:1GB
Tried 1.4 newest test no issues with a couple of them.
Elpida-40nm:LPDDR2:x16:S4:1GB
My Photon reboots on its own while sleeping using both new CM kernels. I can over clock to 1.4. Works fine with the Quark kernel.
Miquiztli said:
Hynix-54nm:LPDDR2:x16:S4:1GB
haven't tried the 1.4oc yet
Click to expand...
Click to collapse
Same here.
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
This, and 1.4 works.
Sent from my MB855 using xda premium
peetr_ said:
Hynix-54nm:LPDDR2:x16:S4:1GB
Click to expand...
Click to collapse
Same here
Sent from my MB855 using Tapatalk
Cat /sys/ram/info
Also include if you have trouble with 1.4 oc kernels.
Be sure to state if your phone works or doesn't work with the 1.4 OC kernels. If you don't list this or have never tried the 1.4 kernel then it doesn't help joker.
Hynix-54nm:LPDDR2:x16:S4:1GB$
All 1.4 kernels seem to be flaky for me. The latest two that you uploaded on the 20th booted, but would reboot in a minute or two. Kinda reminded me of my first photon before I took it back. Sometomes it would randomly reboot and sometims it would sleep of death on me.
I am using the CM7 variants.
1.3 has been rock solid since I installed it.
Sent from my MoPho. All typos are the phones fault.
So which is the flaky chip joker?
Sent from my Motorola Electrify using xda premium
criptix said:
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
Click to expand...
Click to collapse
This is the output I got.
Its not that ones flaky, its that i didnt know we had two photon chips. The hynix is timed better but doesnt oc well without voltage. The other oc's without voltage but wasnt set right in source. The atrix uses elipia(whatever) and is properly set for lpddr2-667. The photon is lpddr2-600 with lower timing. Ive got to set both individually and hope both are timed right. Better memory oc will equal better cpu oc to a point. Thats one reason the atrix oc's a little better. But they have heat issues. Im hoping for at least 333 stable with 400-450 hardcore. If timing is off youll notice the phone slowing down. This is why i need it tested. But only the hynix is tweaked timing wise.
criptix said:
So which is the flaky chip joker?
Sent from my Motorola Electrify using xda premium
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Hynix-54nm:LPDDR2:x16:S4:1GB
Sent from my MB855 using XDA App
criptix said:
Elpida-40nm:LPDDR2:x16:S4:1GB
Mine seems to be different
Could running the electrify rom cause different values?
Click to expand...
Click to collapse
same here
........................
Related
Ive been running at 2050 with no issues. Just curious if anyone is running higher amd their results or feedback.....
Sent from my PG86100 using XDA App
over 9000!!!!
derekfaircloth said:
Ive been running at 2050 with no issues. Just curious if anyone is running higher amd their results or feedback.....
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Which kernel you on?
Sent from my PG86100 using XDA App
NewZJ said:
over 9000!!!!
Click to expand...
Click to collapse
I call bs on 9000.
I get boot loops if I OC over 7000!
Sent from my PG86100 using Tapatalk
Yeah, 6969000 is as high as I get before the bootloops.
/sarcasm
In all seriousness, what kernel/ROM are you getting 2050 with? I can't get past 1728 without it being a little choppy.
ViperROM with nets kernel.
Bamba1260 said:
Yeah, 6969000 is as high as I get before the bootloops.
/sarcasm
In all seriousness, what kernel/ROM are you getting 2050 with? I can't get past 1728 without it being a little choppy.
ViperROM with nets kernel.
Click to expand...
Click to collapse
that's as high as I can go to, if I go higher than 1728 i get boot loops
8.2GHz for me......
Oh wait that was on my computer.
Anything over 1.8 and i bsod and have to battery pull.
Can I use setCPU On a MTD ROM with JTs newest kernel that fixes GPS?
Will their be any issues at all?
Sent from my SCH-I500 using XDA App
Last I herd no, unless it has been updated to work with mtd... voltage control or pimp my cpu only from what I understood.
droidstyle said:
Last I herd no, unless it has been updated to work with mtd... voltage control or pimp my cpu only from what I understood.
Click to expand...
Click to collapse
This is correct
Dunno where that ever came from. I've always used setcpu.
Sent from my SCH-I500 using XDA App
My apologies, no set cpu for glitch kernal!! Sorry jt I get your kernal and glitch mixed up!
jt1134 said:
Dunno where that ever came from. I've always used setcpu.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I've never seen you post before.
If your the jt I'm thinking of, thanks for porting mtd filesystem. We wouldn't ever have cyanogenmod without you.
Sent from my SCH-I500 using XDA App
Enyo. said:
I've never seen you post before.
If your the jt I'm thinking of, thanks for porting mtd filesystem. We wouldn't ever have cyanogenmod without you.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Yes, this is the one and only jt1134. A quick view of his posted topics would easily confirm this.
Hey all. I just wanted to say, that like many with this phone, I have locked and unlocked this phone more than my car, and flashed more than I can count.
I've been a little bummed. I love the overclocked kernel speeds but hate losing 4g. So I keep relocking the bootloader.
I run on a relocked alien 4g rom with some frozen apps. Still get the contacts storage fc tho.
Anyway, onto the meat of my post.
The kernel tweaks that other members of this forum made may actually benefit locked kernels as well. I put both lib files and the kickass file in the folders they belong and I noticed a 500-600 point in quadrant.
On stock kernel I was getting 2600-2900. Now I get 3200ish. Sadly with unlocked overclocked and tweaked kernel I was getting 4600. With better battery life. Funny.
Has anyone else tried this?
Sent from my MB855 using xda premium
You know i have instructions for running skinny on the locked bootloader. It would be faster than alien and still have 4g. Ill be posting a locked only version soon as well
iamanonymous said:
Hey all. I just wanted to say, that like many with this phone, I have locked and unlocked this phone more than my car, and flashed more than I can count.
I've been a little bummed. I love the overclocked kernel speeds but hate losing 4g. So I keep relocking the bootloader.
I run on a relocked alien 4g rom with some frozen apps. Still get the contacts storage fc tho.
Anyway, onto the meat of my post.
The kernel tweaks that other members of this forum made may actually benefit locked kernels as well. I put both lib files and the kickass file in the folders they belong and I noticed a 500-600 point in quadrant.
On stock kernel I was getting 2600-2900. Now I get 3200ish. Sadly with unlocked overclocked and tweaked kernel I was getting 4600. With better battery life. Funny.
Has anyone else tried this?
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Sent from my MB855 using XDA App
Thanks for this! I'll be trying it out.
Can't post in Dev yet. But the workatound breaks my wifi
Sent from my MB855 using XDA App
I've never tried the the work around. But I have tried the nopuddingforu relock and it botches my phone. So.
jokersax11 said:
You know i have instructions for running skinny on the locked bootloader. It would be faster than alien and still have 4g. Ill be posting a locked only version soon as well
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I tried your rom. It was trimmed down. Very nice. But ill trade speed for black and green. I really don't like blue.
Sent from my MB855 using xda premium
xTMFxOffshore said:
I've never tried the the work around. But I have tried the nopuddingforu relock and it botches my phone. So.
Click to expand...
Click to collapse
I didn't use no pudding for you. I used the sbf reflash method then I used bootstrap to restore.
Sent from my MB855 using xda premium
Doballa said:
Can't post in Dev yet. But the workatound breaks my wifi
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
That happened to me when i was unlocked and flashed Rom with kernels in them. I reflashed the oc wifi kernel and problem solved. Maybe that helps
Sent from my MB855 using xda premium
I have determined that the kernel tweaks on skinny rom seems to have no benefits. I dunno why.
Currently my phone on 45. 2. 5 w/relocked alien scores higher on quadrant than 45. 3. 7? w/skinny locked. With alien theme or without.
sent from Cybertron, mopho!
Just found this app when finding apps to mod my motoactv and it works on our photons aswell.
https://market.android.com/details?id=com.j.y.daddy.optimizer
MoPhoACTV Initiative
+1 on this and i have tried it and used it. this is a handy tool
rwp1138 said:
+1 on this and i have tried it and used it. this is a handy tool
Click to expand...
Click to collapse
I agree. Nice tool.
TS
It looks like it does a lot of what the supercharger script does.
Are you guys using that 3g optimizer? And if you are what setting are you using?
My mopho...
Thanks for putting this app have been looking for something to change density and get better scrolling.
Sent from my MB855 using xda premium
Which rom are you guys using? I read a few reviews where this app was having issues with CM7.
6bowmans said:
Which rom are you guys using? I read a few reviews where this app was having issues with CM7.
Click to expand...
Click to collapse
Im on Jokers Skinny rom full rev-1
Ya, broke 3g on 2.3.5 rom, but quick "remove speed up" button saved me.
Sent from my Motorola Photon using xda premium
Agreed. Using this myself and love it.
Testing on CM9 Beta 0.2.0
What is the right setting for my CPU??
Hotplug ondemand userspace interactive performence
Please help.
moonzbabysh said:
Just found this app when finding apps to mod my motoactv and it works on our photons aswell.
https://market.android.com/details?id=com.j.y.daddy.optimizer
MoPhoACTV Initiative
Click to expand...
Click to collapse
prefer superscript and modifying build.prop
Sent from my Motorola Electrify using XDA
I downloaded motomizer and it killed my battery life. I tried it three times with the same result. Anyone else have this problem? I am running 2.3.5 unlocked.
Sent from my MB855 using XDA
Uh60m Pilot said:
I downloaded motomizer and it killed my battery life. I tried it three times with the same result. Anyone else have this problem? I am running 2.3.5 unlocked.
Sent from my MB855 using XDA
Click to expand...
Click to collapse
root, superscript, ebit build.prop... if u would Lee help googletalk me @ [email protected]@gmail.com
Sent from my Motorola Electrify using XDA
help me pls
Flash Faux kernel... You're most likely on stock kernel which can't be OC...
http://forum.xda-developers.com/showthread.php?t=1359951
[Kernel]Amaze[2.6.35.13](v009)OC~1.73/JRCU/UV/CIFS+UTF-8/Power Saving[Mar-13]
Then use System Timer or SetCPU...
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
glacierguy said:
Flash Faux kernel... You're most likely on stock kernel which can't be OC...
http://forum.xda-developers.com/showthread.php?t=1359951
[Kernel]Amaze[2.6.35.13](v009)OC~1.73/JRCU/UV/CIFS+UTF-8/Power Saving[Mar-13]
Then use System Timer or SetCPU...
Sent from my HTC_Amaze_4G using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
i do have faux kernel, no program i have downloaded can go past 1.51, and fauxclock fc's on start
anthonylancer said:
i do have faux kernel, no program i have downloaded can go past 1.51, and fauxclock fc's on start
Click to expand...
Click to collapse
R u on his latest one? Or an older one? If my memory serves me right, there was on version he had taken the oc off for some reason. I may be wrong tho
Sent from my NRGized Amaze...
via xda premium
.9 with faux clock .9 fourth bar sense is there anything I can do? Also every single app I've tried maxes out at 1.51. Is this normal cost I want 2ghz on my ****
Sent from my HTC_Amaze_4G using XDA
anthonylancer said:
.9 with faux clock .9 fourth bar sense is there anything I can do? Also every single app I've tried maxes out at 1.51. Is this normal cost I want 2ghz on my ****
Sent from my HTC_Amaze_4G using XDA
Click to expand...
Click to collapse
Have u tried setcpu or system tuner? Maybe reflash the kernel...
Sent from my NRGized Amaze...
via xda premium
I do believe that due to our phone's lack of true kernel source, faux was only able to add a max slot of 1.51. I haven't seen anyone jump higher. Don't quote me though.
Edit: sorry it should be able to oc to 1.75
Sent from my HTC_Amaze_4G using XDA
xndabox said:
I do believe that due to our phone's lack of true kernel source, faux was only able to add a max slot of 1.51. I haven't seen anyone jump higher. Don't quote me though.
Edit: sorry it should be able to oc to 1.75
Sent from my HTC_Amaze_4G using XDA
Click to expand...
Click to collapse
Correct, 1.7
Sent from my NRGized Amaze...
via xda premium
anthonylancer said:
.9 with faux clock .9 fourth bar sense is there anything I can do? Also every single app I've tried maxes out at 1.51. Is this normal cost I want 2ghz on my ****
Click to expand...
Click to collapse
If you have the newest version of SetCPU, and you can prove that you have Faux's Kernel installed, I'll be impressed.
(Goto Settings>About>Software Information>More>Kernel Version
If the Kernel doesn't say "[email protected] #2|SMP PREEMPT..." it isn't faux's kernel installed. Easiest way to install it is to use one of the scripts here to do it in fastboot. I always just manually copy the modules manually, and flash it myself from fastboot, this way I KNOW it got flashed. (as mentioned, 1728mhz is the max on Faux's kernel.)
go to your settings and make sure that your kernel says "paul" in it somewhere. You probably did not flash the kernel correctly and need to flash it again. Sometimes you actually need to flash the kernel twice.
Thanks for the help guys, reflashed kernel and it works now. Unfortunately only up to 1.72 but that's good enough. Any way to get it higher though?
Sent from my HTC_Amaze_4G using XDA
anthonylancer said:
Thanks for the help guys, reflashed kernel and it works now. Unfortunately only up to 1.72 but that's good enough. Any way to get it higher though?
Sent from my HTC_Amaze_4G using XDA
Click to expand...
Click to collapse
No, faux only oc'd it to 1.7
Sent from my NRGized Amaze...
via xda premium
anthonylancer said:
Unfortunately only up to 1.72 but that's good enough. Any way to get it higher though?
Click to expand...
Click to collapse
Sure, download the kernel source from Faux, change voltage scaling and multipliers, and compile it, and you might be able to hit 1.8, these chips can hit 1.9ghz but with more overvolting than most would be comfortable with.
Sent from my HTC_Amaze_4G using XDA