StatKbd keyboard - Windows Mobile Apps and Games

StatKbd project - self-adjusting SIP keyboard for WM.
It analyses touch coordinates and adjusts recognition algorithm. This is especially important for finger typing - usually you don't hit exact center of button while typing due to device tilt, etc...
In addition to this, StatKbd introduces key "spot" size adjustment basing on language statistics - again, for better touch recognition.
From user perspective this means that every key virtually expands and shrinks (normally it's not visible, but you can enable special mode to see it) basing on previously entered text. This allows you to enter text better, avoiding typos.
Of course, all these options are adjustable, so you can disable them if you want.
There're 2 skins (black and white) in package. Visual skin editor is also free and available for download.
Currently English and Russian layouts are available, but you can easily customize skin for any language (we'll really appreciate if you upload it here or to official site then).
You can read more (and download installation packages) at official site:
gss.freeiz.com (sorry, can't post direct link now - I'm new to this forum)
Current version (1.2) is free, but donations are very welcome - you can use "Donate" button on official site.

nice try buddy but i think that this not good enough for any WM. although its not finger friendly and its do not even uses numeric keys can't find even enter. LoL..

Well, look closer to long-click (upper) symbols. Keypad is on long-click for most right button in middle row (short click switches language layouts), enter is long-click on space. I did it because I was really sick and tired of false clicks on enter button (that you can't undo).
As for finger-friendly, well, miracles don't happen in this world (especially with keyboards on small screens ). However, I really think that you didn't calibrate it. To adjust keyboard to your fingers, you should manually calibrate it (via options) or just spend some time typing text and correcting typos by backspace (yes, that's annoying, but takes just several minutes) - keyboard will self-adjust.

I have installed it in my X1. Its quite good but its a bit too small to use in portrait mode. Other than that its not bad but takes a bit getting used to.

The idea was to make small keyboard, to keep most of the application screen visible. White skin is smallest one, black one is bigger. You can create you custom skin (with appropriate size) using Stat Skin editor - just take one of original skins, resize jpg files to the size you want (using any picture editor), then remap keys using StatSkinEditor (there's option to do it automatically - Edit / Resize Keys Map). Possibly, you'll have to change font sizes too.

Thank you very much .. It acts better than Finger friendly !!! .. I wish The skin editor really works too cuz I tried it on Win 7 , Win 8 .. Wish for Arabic Skin ...
Thanks again for a good app.

maybe a little bigger skin? its hard to use.

drhesham said:
Thank you very much .. It acts better than Finger friendly !!! .. I wish The skin editor really works too cuz I tried it on Win 7 , Win 8 .. Wish for Arabic Skin ...
Thanks again for a good app.
Click to expand...
Click to collapse
What is the problem with Skin Editor ? It works OK on my PC. You have to install Visual C++ 2008 SP1 redistributable package though, if it is not installed on your PC yet (by some other application). You can download it for free from Microsoft site: ... /download/en/details.aspx?id=5582
Treat ... as microsoft web server address - this stupid system does not allow me to post full link.

Related

MortButtons 2.5

MortButtons is around since about 4 years, but since there's quite some hype recently about both "touch-able" menu systems like Spb Menu or TouchCube and "click-through" button enhancers like HButton, maybe MortButtons might be interesting for some people, too.
It offers all required ways to launch a menu entry (press app button multiple times and wait for timeout, direction pad, tapping the entry), allows freely configurable items for up to 5 main menus (any number of entries and sub menus; don't believe old sites telling about an entry limit, it doesn't exist since years...), includes a task list (like Alt-Tab), offers many "special" entries (system settings, new documents, calls, new messages, screen rotation, ...), is skinnable, free (though donations would be nice), ...
V2.5 compared to V2.41 mostly adds some "facelifts" (new icons and skins, alpha channel support, images as icons for entries, user defined backgrounds, ...) and better performance, but also some new features like finger gestures and access to the system settings.
More informations, download, manual, etc. is available here.
(Screenshot shows TransAqua1 (new default) skin with Spb's Snowy theme as background, icons are "GlassIcons" .png images available in Rotlaus' forum intended for rlToday).
Wow, Thank you so much for such a wonderful software. I just started using Mortbuttons just a few weeks ago and like it very much.
I have made a skin that goes well with the Touch look and would like to share it.
JudgeDredd67 said:
Wow, Thank you so much for such a wonderful software. I just started using Mortbuttons just a few weeks ago and like it very much.
Click to expand...
Click to collapse
Yeah, it's only a pity it's still some kind of insider tip while around for years, while similar concepts realized in the last few months make such a fuzz...
I have made a skin that goes well with the Touch look and would like to share it.
Click to expand...
Click to collapse
Thanks. Btw, it's also possible to create a skin with bigger tiles like the original TouchCube style. You can use any size for the menu entries you like, as long as MortButtons manages to fit at least one entry on the screen...
Nice Mort! I'll try it and give you some feedback
By the way, can I include this on a ROM ?
Thanks for great work, I was using previous version and this is even better. Keep it this way.
Just updated my skin to take advantage of the alpha layer.
Thanks again Mort for all your wonderful stuff.
Excellent application. Thanks a lot for the hardwork.
dferreira said:
By the way, can I include this on a ROM ?
Click to expand...
Click to collapse
Sure, go ahead. Same goes for my other apps, too, btw.
JudgeDredd67 said:
Just updated my skin to take advantage of the alpha layer.
Click to expand...
Click to collapse
Nice one, tough the alpha layer isn't very obvious.
Little hint: Zip only the folder contents itself (i.e. no subfolder in the archive), then change the file extension from .zip to .mbz. Having to copy only a single file makes skin installation a bit more easy for beginners. And it saves some space, though usually more by better cluster usage than by compression (most images already are compressed...).
Thanks again Mort for all your wonderful stuff.
Click to expand...
Click to collapse
You're welcome...
Very nice update, the launch time seems to be much less. There does seem to be a bit of a memory leak? But not sure how to pinpoint if its cuz of MortButtons or something else. Nevertheless, it is a very nice, free, and actually more powerful alternative to other touch/launcher kinda applications.
Also a fan of MortScript (for small, useful tasks) and MortPlayer (THE audio player for winmobile ). Do you have a smartphone version of MortPlayer planned?
VGA & icons pixelization
Hi,
I just tried on my VGA PDA (Dell Axim X51v), and application icons which are VGA-enabled, appear pixelized in MortButton. Any idea on what I did wrong?
Great work Mort. I've been using mort buttons since about the day after I got my vario II 16 months ago. It was the ideal solution to the missing capabilities I had always presumed a touch screen device would come with by default!
I much prefer it to all of these today screen launchers as these seem to slow down the phone and generally use smaller, less usable buttons for my sausage fingers!
One thing I've noticed though, the new built in shortcuts to the control panel options don't seem quite right. e.g. I've added a shortcut to the Memory control panel on a menu. Having launched the Memory panel, the only way to close it is by pressing the 'ok' button on the top right of the screen - neither OK button works....
Alternatively, if I add a .lnk shortcut which starts the memory panel (with the shortcut "Settings>System>Memory>Main = 20#ctlpnl cplmain.cpl,4") the panel launches fine and can be closed with the OK buttons no problem.
The same goes for Input, Phone, Today panel shortcuts...
I was wondering if MortButtons is not closing properly after launching these settings links?
Apart from this quibble, a great update. Keep up the good work - I'd have binned this phone long ago if it wasn't for this App!!
MortButton and FTouchFlo
Thanks Mort for a great app. I was wondering what is the command line to launch each of the buttons. I was trying to use this in conjunction with efrost's FTouchFlo app where I assigned a gesture like leftright app to launch button 1 by putting the path "\Program Files\MortButtons\Button1.mbi" but that did not launch button1 when gesturing. Would you happen to have a solution?
blistirs said:
Thanks Mort for a great app. I was wondering what is the command line to launch each of the buttons. I was trying to use this in conjunction with efrost's FTouchFlo app where I assigned a gesture like leftright app to launch button 1 by putting the path "\Program Files\MortButtons\Button1.mbi" but that did not launch button1 when gesturing. Would you happen to have a solution?
Click to expand...
Click to collapse
I experienced the same. But if you link to the 'Button.exe'. It will bring you to the main menu where you can see the 5 buttons. While this is one more step extra, better than nothing.
^ What you guys are trying to do works fine here.
For e.g. go to \Windows\Start Menu\Programs\MortButtons and see how the shortcut for button 1 is created (if you have a good file explorer such as gsfinder you can see the shortcut as well as the command line parameter).
Basically the shortcut should point to \Program Files\MortButtons\MBRunner.exe and the command line parameter should be \Program Files\MortButtons\<path_to_button>.mbi. Both of these paths should be put in Ftouchflo config without quotation marks around. This makes for a much faster, customizable and full featured launcher than the cubes.
Thanks. That did the trick!
ammarr said:
^ What you guys are trying to do works fine here.
For e.g. go to \Windows\Start Menu\Programs\MortButtons and see how the shortcut for button 1 is created (if you have a good file explorer such as gsfinder you can see the shortcut as well as the command line parameter).
Basically the shortcut should point to \Program Files\MortButtons\MBRunner.exe and the command line parameter should be \Program Files\MortButtons\<path_to_button>.mbi. Both of these paths should be put in Ftouchflo config without quotation marks around. This makes for a much faster, customizable and full featured launcher than the cubes.
Click to expand...
Click to collapse
Once again for dummies. You mean:
LeftRightApp:\Program Files\MortButtons\MBRunner.exe
LeftRightAppCmdLine:\Program Files\MortButtons\Program Files\MortButtons\Button3.mbi?
I tried:
LeftRightApp:\Program Files\MortButtons\MBRunner.exe
LeftRightAppCmdLine:\Program Files\MortButtons\Button3.mbi
but it didn't work, it shows an empty "MortButton" window.
Maybe you need to use quotes around the parameter (i.e. mbi file). Otherwise it might be MortButtons tries to load "\Program" as menu informations, which doesn't quite work...
The exact method that you've listed works for me. Are you using the latest version of ftouchflo? I remember one of the versions had a bug in the leftright swipe..
Where can I find soft-reset function and it's Icon so that I can put it on the Mortbutton. Annoying each time wanna do soft reset have to tuck the stylus in the hole.

[APP] \\\\\\\ FingerKeyboard v2.1 /////// best WinMo typing experience!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For VGA and QVGA we recommend that you install Giannis86 versions, since they contain all language layouts. New Giannis QVGA fixed cabs are now available, as well as official WVGA / WQVGA with small updates in layouts for: Greek, Spanish and Hebrew languages.
>>> HOT! Giannis86 VGA with arrows cab / all languages included and some extra features!
>>> HOT! Giannis86 QVGA with arrows cab / all languages included and some extra features!
>>> HOT! Giannis86 QVGA without arrows cab / all languages included and some extra features!
>>> Available for download: Giannis86 VGA without arrows cab / all languages included and some extra features! You can read more about Giannis86 VGA version in a dedicated thread.
>>> Available for download: WVGA & WQVGA (all languages)
>>> Available for download: VGA & QVGA - utak3r editions
(not all languages included)
Check out FingerKeyboard video demonstration:
​
Please note that the speed of typing in
this video is intentionally slightly slowed
down - this was done so that it is easier
to see what buttons are being typed
during the demonstration.​
BEFORE INSTALLATION:
Before installing FingerKeyboard2, please make sure you find out what is the correct installation version for your device. You will see that we have attached several different versions - they're designed to work on specific device resolutions.
Do not download before you know exactly what you need for your specific device! Explanation of how to discover what resolution your device has is described in HELP AND FAQ document listed few posts below!
Speaking of which - READ the whole HELP AND FAQ text; it will help you understand how to configure and use this keyboard!
INSTALLATION:
- IF YOU HAVE OLDER VERSIONS OF FINGERKEYBOARD, PLEASE UNINSTALL THEM BEFORE INSTALLING V2.1! After removing old version, please restart the device and remove FingerKeyb folder before proceeding!
- Run the attached .cab file (recommend you install to device memory).
- The keyboard will install into /Program files/FingerKeyb. There is also a link to Configuration tool in the Start > Programs.
- After installation, a Configuration utility will open. Here you can customize the layouts, choose color schemes and configure various options of FingerKeyboard2.
- Click on OK and softreset the device.
- Open up your standard keyboard (in SMS for example), click on the small arrow next to the middle keyboard icon and go to "Other input options".
- FingerKeyb should be listed there, select it and you're good to go!
- If you wish to set FingerKeyb as default keyboard, even after restart of your device, use SIP change application. Remember to set the time-delay to 40-50 seconds!
HOW TO UNINSTALL?
Go into Settings > System > Remove programs. It is listed as "Exidler's FingerKeyboard".
CREDITS:
Created and programmed by Exidler
Designed by Rozenthal
Main tester ChrisCross
Big thanks to people who helped us in creating this application (in no special order): Berkut_G, utak3r, GoldCoin, Cerato, Schreda, Panosha, JBouRas, SBS, BadCluster, Taiseer999, Borchert, Hanackin, Iligcons, Allbercik, Ombre.px, Nvidia32, derfler, ilovepunani, elite-fusion, RoozbehDream, Giannis86, parasite81, bugsykoosh, Reefhunter49, Chompy18 (if I forgot someone, please PM me!)
PROGRESS:
v2.1 - new and improved FKBD2 with unique features (5. april, 2009)
v2.0 - official release of updated FingerKeyboard
v1.4 to v2.0 beta - closed beta testing (link to 1.4 thread)
v1.4 - alternate language layout for landscape mode. New vertical num pad.
v1.3 - updated landscape graphics and layout, fixed bugs.
v1.2 - updated vertical layout, now supports limited landscape mode, new .dll and register files.
v1.1 - vertical support for 2 languages + numeric keypad, new graphics, new layout
v1.0 - exidler's original version
DISCLAIMER / LICENSE / EULA
Please read carefully the terms and conditions of this End User License Agreement ("EULA") before installing FingerKeyboard software ("Software").
This EULA provides a license agreement between authors of FinkerKeyboard ("Licensors") and you (person) ("Licensee") to use the Software and contains warranty information and liability disclaimers.
By installing and using the Software you accept and agree to the terms of this EULA. If you do not agree with these terms and conditions, you must cancel the installation or, if the Software is already installed on your device, promptly uninstall it.
OWNERSHIP
The Licensee acknowledges and agrees that the Software is a product of the Licencors. It is protected under international copyright law. All copyrights are exclusively owned by Exidler and Rozenthal.
LICENSE GRANT
The Software is freeware. However, the Licensee may use it only and exclusively for private personal and non-commercial usage, and only under conditions which do not contradict the restrictions noted below. If you want to use Software for anything else, you must contact the Licencors. Software may not be bundled or distributed with any other package without written permission of the Licensors.
NO WARRANTIES
The Software is distributed "as is" WITHOUT WARRANTY OF ANY KIND. The Licensee uses the Software at his own risk. The Licencors shall not be liable to the Licensee for any kind of consequences, which occur or not occur while installing, using or uninstalling the Software.
RESTRICTIONS
In accepting the EULA granted by Licensor, Licensee agrees that he shall not
1. Sublicense, sell, lease, rent, permit use of, give, or lend the Software
or any copy or portion thereof;
2. Decompile, disassemble, reverse engineer, analyze, or otherwise attempt to
discover the source code of the Software;
3. Use or incorporate the Software or any portion thereof in any other product
without the prior written permission of the Licensor;
4. Remove, alter, or obscure the copyright, trademark, proprietary, or other
notices from the Software or any of its components.
Licensee is allowed to edit existing or create new language layouts, and share them with other users. Licensee is allowed to edit existing or create new graphic elements, but only with respect to copyright and trademark notices.
DISTRIBUTION
The Licensee may NOT redistribute the Software by any mean (CD, DVD, Web site...) without permission from Licencors.
TERMINATION
The Licensee may terminate the EULA at any time. Also, the EULA will terminate automatically if Licensee fails to comply with the restrictions described above. Upon termination of the EULA, the Licensee shall remove all copies of the Software from his (her, its) device and all storage media.
​Here you can say "Thank you" to us
​
Help and faq
HELP / FAQ / TROUBLESHOOTING
Read this whole text before using the FingerKeyboard or asking for help! If your question is already answered in FAQ it will be ignored. Don't be lazy!
What version should I install on my XYZ device? / What is WVGA, WQVGA, VGA and QVGA?
To successfully install Fingerkeyboard on your device, you need to pick the correct version for your phone. For example, let's say you want to find out what resolution Samsung Omnia has. Type "Samsung Omnia review" into Google, and among the first few results usually you'll get the most popular review sites listed. Reviews always contain resolution information, so we easily find out that Samsung Omnia has a 400x240 pixels resolution. That means you should install FingerKeyboard WQVGA cab.
Here's the list of supported resolutions for FingerKeyboard, with their standard abbreviations:
WVGA - 800x480
WQVGA - 400x240
VGA - 640x480
QVGA - 320x240
Why does FingerKeyboard look differently on my device then on the screenshots?
There can be some small differences between the screenshots and what you see on your screen. The reason for this is that different layouts can have different features, graphic elements or button layouts. We consider English layout to be the "standard" layout, with best combination of button size and positions.
How can I type those special characters that appear above normal characters?
Press and hold a key.
How to switch to full CAPS?
Press and hold the shift button.
Spacebar
If you press and hold spacebar button it will write a dot followed by a space.
How to use text selection?
Switch to full CAPS mode and then use arrow buttons to select text.
How to use cut / copy / paste / undo?
Switch to full CAPS mode, select the text you want to cut or copy, and press and hold ^c or ^x characters. Then press and hold ^v to paste. On some layouts these are named "cut", "copy" and "pst". Same thing with "undo" option - you can use "undo" at any moment, and it will take you back for unlimited number of steps.
Where is that Config tool you mention?
After you install FingerKeyboard, go to Start > Programs > Finger Keyboard.
How can I switch to numeric keyboard?
Press 123 button. If your layout does not have dedicated 123 button, press Shift and 123 will appear on your Language toggle button. Behavior of Language toggle button can be customized in Configuration tool.
How can I change a color scheme of the keyboard?
Config tool > Main > Color scheme: select which ever you like and press OK or Apply.
How can I select language layouts?
Config tool > Main: you will see a list of all language layouts you have in your FingerKeyboard folder. Put a tick next to the layouts you want to use and press OK or Apply. We also advise you to physically delete layouts you don't want to use from oyur device (Program files / FingerKeyb / Skins). This will make Config tool start up a little bit faster and use less memory.
What are all those Backspace options in Config tool?
Behavior of Backspace key can be customized to suit your needs. You can separately control what will Backspace do on short click and long press, as well as how it will behave in small caps or caps lock mode.
How to minimize or turn off the keyboard?
Short press the keyboard toggle button (the one with small keyboard or switch sign on it). Long press on this button will turn off FingerKeyboard and switch to default HTC keyboard.
How to disable click sound?
Run FingerKeyboard Config tool. Under "Options" tab you will find a "Press sound" box. Here you can select from several different click sounds, all of which have "quiet" and "loud" versions. This is useful if you want a subtle click sound, but don't want to lower the volume for the whole System. There is also a "no sound option".
How can I get vibration feedback?
Config tool > Options tab > Press vibrate. Here you can select how long you want the vibration feedback to last. Minimum of 20ms will get you a barely noticeable vibration effect, while 80ms will be very strong.
Vibration feedback don't work on my device. Why is this?
If you're having problems with vibration feedback, it's most likely that our autodetect LED vibration feature don't work well on your device. However, you can play around with "VibrateLed 1" string in skin-01-global.txt (Program Files\FingerKeyb\Skins) and see if perhaps changing to another LED number will work for you.
How can I control the key-press delay? / What is "Hold time" / Can I make the keys repeat on press+hold?
"Hold time" option in Config tool is a cool option you can use to control how long it will be needed for a key to be continuously pressed before it writes a letter or performs an action. This part of the "Hold time" function is controlled with numbers in the first box. The second box controls how long will it take for a key to be continuously pressed before it starts repeating itself. So, if you put 500ms in the first box, and 200ms in the second box, that means you will have to press a key for 500ms before it performs it's "long press" action, and 200ms more before it starts repeating that function. If you hold the key even longer, it will then gradually accelerate.
Can I hide / show Windows menu bars?
Yes, go to Config tool and under "Options" tab select how you want the keyboard to display in Portrait and Landscape mode. We suggest selecting "Show bar" for portrait, and "Hide bar" for landscape.
I want the pop-up images to stay longer on screen. How can I do this?
In Config tool, Options tab, there is a "Popup time" box. Here you can select how long will the pop-up image stay on screen after a key has been pressed. If you set pop-up time to 1500ms, this means the pop-up image will stay on screen for 1.5 seconds, or until next key is pressed. Pop-up image delay affects ONLY the normal character keys (A,B,C,D etc). Special action keys, such as Shift, Space, Backspace etc. have default short time and will not stay on your screen. This is done to avoid action keys images covering large areas of the screen with their larger pop-up images.
What are Smiles / Shortcuts?
This is a feature that no other keyboard has. It allows you to control what any of the several predefined actions keys will do when you press and hold them. Almost all layouts have these special actions included (between 7 and 11 actions on most of the layouts). You can control what will show up on a key when you open the keyboard, as well as what that key will write when you press+hold it. For example, you can type into "Key text" box "info" and into "Action text" you could type "John Smith, gsm:00123456789, e-mail: [email protected]". Or maybe your favorite web address. Or your signature. Or your wife's name. Or your lover's name for all we care The possibilities are endless! You can do the same thing for smiles - if you don't like the default ones, use your own, or something else!
A special key I need is missing / Can I customize smiles / Can I change shortcuts?
If there's a key missing in your language layout, you can easily add it yourself by using either Smiles or Shortcuts tab in Config tool. Simply type the missing key into two of the horizontal boxes and the key will appear when you long press a button that has that Smiles / Shortcut action.
Why does XYZ language layout have only a few smiles / shortcuts buttons?
Some language layouts have very high demands regarding the number of characters they need to occupy. Because of this there are a few language layouts that may have a smaller number of smiles / shortcuts spaces reserved. We have tried to include as many as possible, believe us!
How can I make FingerKeyboard a default keyboard? / How can I keep FingerKeyboard as default keyboard even after reset?
You can use a small program called SIP Change. Look it up on XDA-developers.com forum, and remember to set delay to 40-50 seconds.
"Where is XYZ language layout? Why is it not included!?"
If you want a certain language layout, first check FingerKeyboard2.1 thread on XDA-developers.com forum if someone maybe already made an additional layout and posted it there. If not, the best thing you can do is to make your own layout and share it with other people. If your layout is good, we'll probably include it in next version. Please do not spam us with "I WANT THIS LANGUAGE!!!" messages. All language layouts depend exclusively on the community to produce them. If no one can't be bothered to make your language layout, we can't really help you.
Editing instructions:
You can use the existing layouts to make it custom layouts! The easiest way is to open one of the layout skin txt files and replace the existing characters with your own. Experiment a bit, and you will soon get the hang of it. Same applies if you want to make your own skin - edit the included bitmaps, and change the appropriate lines in txt files. Everything you want to know about FingerKeyboard actions, layouts, colors and resolutions is explained in "doc-about-skin.txt" that is located in the root of the FingerKeyb folder. Read it first before asking for help!
​
XT9 and Word suggestion
XT9 & TEXT SUGGESTION:
This keyboard does not support T9. However, there is an option to enable standard Windows Mobile word suggestion, as well as SMS contact name suggestion. There are two ways to do this.
First way is to use the FingerKeyboard Config tool and select what you want to use (Word / SMS suggestion, or both). SMS suggestions will work normally, but for WinMo word suggestion to function, you will need to switch to HTC default keyboard and manually turn on XT9 on the little T9 switch. After that, you can reload FingerKeyboard and everything will work normally. This can be a good way for people who like to use T9 on other keyboards, but also want to use FingerKeyboard without T9. This approach also makes it possible to use new HTC style suggestion windows (the ones with small arrows on each side, where you can flip between names / words).
To avoid messing around with XT9 switch on HTC keyboard you can simply globally disable XT9 across the whole system. That means that T9 will not work even on system keyboards that have T9 support, but SMS / Word suggestions will both work. This will disable the HTC style suggestion windows, and use the default WinMo style (opens a simple white window with list of suggested words or names). The patch file which disables XT9 globally is attached in this post. This patch can be uninstalled. If you already have it installed, you do not have to remove it or reinstall it. Also, please note that when you install this patch, you will not be able to select SMS /Word options in FingerKeyb config tool - they will always be grayed out.
It might be best to install the FingerKeyb cab and test it first. You can always globally disable XT9 later on if you decide so.
There is a known bug with Word suggestion, that has been almost fully fixed in this version of FingerKeyboard. The bug manifests itself like this:
- if you have "Text word suggestion" turned on, and you type an SMS message, the "home" and "end" buttons will not work while the word suggestion window is open on the screen. If you select a word, those keys will work normally. Unfortunately, this isn't our fault - it's actually a bug in Word suggestion app.​
Bug tracker
BUG TRACKER for v2.1
This space is reserved for bug tracking.
Even though the latest version of FingerKeyboard2 has been tested on multiple devices with different ROM-s for more then 20 days, it's very likely that we missed some bugs.
When reporting bugs, please try to be as detailed as possible. The more information you supply, the easier it will be to find the bug and squash it. And we like squashing bugs! Some bugs with previous versions of FingerKeyboard were caused by 3rd party software. The usual suspects are other 3rd party keyboards.
DEBUG LOGGER! PLEASE USE IT IF YOU HAVE PROBLEMS!
Attached below, you will find Fingerkeyb_debug.dll file. This file will create a debug log which you can then send to us, so we can detect problems and try to fix them in the next release. It is mostly aimed at solving the problem that some people have with landscape mode, but it can be used to track any other problems as well. Debug logger is not that painless to use, but if you really want our help, this is the best way for us to detect what the problem is.
To start using this, you will need Resco Explorer or Total Commander CE.
Go into FingerKeyb folder (Program Files).
1. rename Fingerkeyb.dll to something else (example: Fingerkeyb_.dll)
2. Copy FingerKeybd_debug.dll to Program Files/FingerKeyb directory.
3. Rename FingerKeyb_debug.dll to FingerKeyb.dll
4. Softreset the phone
5. Open the FingerKeyboard, press 1-10 random keys on keyboard.
6. Minimize the keyboard, rotate the phone and open the keyboard again, after the phone is in landscape mode. Try to press 1-10 random keys again.
7. If you encounter the landscape bug, switch to HTC keyboard, making sure that it shows in landscape correctly.
8. Copy the FingerKeyb.log in working directory to a different folder on your device or PC and after that select FingerKeyboard again.
9. You will now have 2 log files. Rename them so they don't have the same file name and send them to Rozenthal or Exidler.
If you do not have Resco File Explorer or Total Commander CE, you can try this procedure:
0. Unregister keyboard using the old Fingerkeyb_register.exe (found in v1.4 thread) and then softreset
1. same as above
2. same as above
3. same as above
4. Register keyboard with the Fingerkeyb_register.exe
5. same as above
6. same as above
7. same as above
8. same as above
9. same as above
The logging tool will seem very slow, that's normal - it needs to write a bunch of info on every keypress, so take it easy. After you're done, you can simply reverse the procedure: remove the debug.dll, rename back the original Fingerkeyb.dll, and continue using the keyboard normally.
The log files can be sent to us via private messages here on XDA. Also, please do not expect to instantly receive a magical solution for your problem. If a simple solution exists, we will message you on how to apply it. If it's an issue that requires changing FingerKeyboard core files, it's more likely that the issue will be fixed in future versions of the software.
__________________________________
>>> B U G L I S T <<<
[06. april, 2009]
- Some color schemes in WQVGA have problems (FIXED)
- Some layouts in WQVGA version are causing problems / stuck in numerical keypad (FIXED)
- Samsung Omnia problems with Contact name suggestion (FIXED by installing T9 disable patch)
- Contact name SMS suggestion not working for some people on Touch HD with Dutty 2.6 ROM (FIXED by installing T9 disable patch)
[07. april, 2009]
- Switching from landscape back to portrait can sometimes result in a few pixels big square in top left corner of the device screen. This square looks like a piece of keyboard and can be pressed. The square goes away if you run Config tool or reload keyboard. (unresolved)
​
Using FKBD2.1 in ROMs
If you are a ROM cooker and wish to use FingerKeyboard2 bundled in your ROM, please notify us first. All ROM-usage requests will be granted, but we wish to know where the keyboard is being used. ROM chefs may find the following info useful:
Registering keyboard in system.
- register dll as com object
or
- add to registry this values:
=====================================
[HKEY_CLASSES_ROOT\CLSID\{C03755DF-3EE7-41DF-AE5E-3FBBCA603F1A}]
@="FingerKeyb"
[HKEY_CLASSES_ROOT\CLSID\{C03755DF-3EE7-41DF-AE5E-3FBBCA603F1A}\DefaultIcon]
@="\\Program Files\\FingerKeyb\\FingerKeyb.dll,0"
[HKEY_CLASSES_ROOT\CLSID\{C03755DF-3EE7-41DF-AE5E-3FBBCA603F1A}\IsSIPInputMethod]
@="1"
[HKEY_CLASSES_ROOT\CLSID\{C03755DF-3EE7-41DF-AE5E-3FBBCA603F1A}\InprocServer32]
@="\\Program Files\\FingerKeyb\\FingerKeyb.dll"
=====================================
Path to .dll can be different.
In registry is saved only which skin files need to load and
which layout was last for each process.
[HKEY_CURRENT_USER\Software\FingerKeyb]
list of exe names and which layout must be restored for this process.
[HKEY_CURRENT_USER\Software\FingerKeyb\SkinFiles]
list of skin files names in _lowercase_
skin-00-scheme-blackblue.txt = DWORD:0 -this means "don't load this skin file"
skin-00-scheme-blackred.txt = DWORD:1 -this means "load this skin file"
Skin files that do not exists in this key will be loaded by keyboard automatically.
Skins directory is relative to place of keyboard DLL.
=====================================
All other settings are saved in skin files (mostly in skin-01-global.txt)
Exception is HTC T9 settings:
[HKEY_LOCAL_MACHINE\Software\Tegic\eT9]
IsSupportMSSIPContact = DWORD:1 - sms name suggestion
XT9SupportMSSip = DWORD:1 - word
But this settings is applied only if:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409]
"Ime File" = "et9ime.dll"​
Media kit
Media kit for media / press / bloggers
If you are a representative of the media, and wish to cover FingerKeyboard2 in your magazine, portal or blog, below you will find a ZIP-ed media kit.
Inside it is a short text about FingerKeyboard v2.1, several full size screenshots, high-quality FingerKeyboard logo as well as some other graphics that can be used in publications of any kind.
If you have any additional questions, you will find the needed contacts within the info-text.
We would also kindly ask you to inform us when you publish your cover on FingerKeyboard.
​
Very nice, is there a skins thread/section yet though? O_O
Hi, thanks.
I dunno if it's because everyone likes the default color schemes (there is a lot of them included), but very few people actually played with graphics for FKBD so far.
And those that did were mostly making small changes here and there, no big overhauls.
Your thumbs are appearing as blocked images...
http://www.imagesforme.com/skin/default/sys_icons/HotLink.gif
downloading now to test this out! Thanks!
very very nice!!!!!!
One question only, where are the settings stored so we can edit them (language selected, vibration enabled, sond type etc) and cook it into our ROM's
Need The ARABIC Language For QVGA
Any One Can Make it
i have already asked the authors in the main thread, Sorry Guys For double posts, but i need it
GREAT KEYBOARD, You have done the Best!!!
jtreminio said:
Your thumbs are appearing as blocked images...
http://www.imagesforme.com/skin/default/sys_icons/HotLink.gif
downloading now to test this out! Thanks!
Click to expand...
Click to collapse
You sure? Works perfectly fine for me :/
dody said:
Need The ARABIC Language For QVGA
Any One Can Make it
i have already asked the authors in the main thread, Sorry Guys For double posts, but i need it
GREAT KEYBOARD, You have done the Best!!!
Click to expand...
Click to collapse
It is available for VGA Giannis edition, but not for the utak3r QVGA.
However, we will make a QVGA version that will be just the same as WVGA / VGA with all language layouts included. Hang on for a day or so, and it will be posted!
p.s. Thank you!
Warmax88 said:
very very nice!!!!!!
One question only, where are the settings stored so we can edit them (language selected, vibration enabled, sond type etc) and cook it into our ROM's
Click to expand...
Click to collapse
Check Program Files\FingerKeyb\Skins - everything is in simple TXT files.
If you want to cook this into your ROM, we would kindly request that you first contact us and tell us what are you working on.
We will grant all requests for ROM inclusion, we just want to know where and how is the keyboard being used.
Whoa, i didn't notice that you have a thread in dev&hacking - i was about to suggest creating it instead of staying hidden in the blackstone section
Maybe it would be a good idea to lock the old one to keep the discussion in one place?
I am having trouble with the Giannis86 VGA cab. It wont install on my touch pro. I get an unsuccessful installation message.
rozenthal said:
it is available for vga giannis edition, but not for the utak3r qvga.
However, we will make a qvga version that will be just the same as wvga / vga with all language layouts included. Hang on for a day or so, and it will be posted!
P.s. Thank you!
Click to expand...
Click to collapse
thanks alot!!!!!!!!!!!
Waiting......
Thank you for this very customizable and user-friendly sip
Great work guys! This app has just hit Maturity 2.0 . It had some things needed to be fixed, but I had not expected this. Thanks
im confused.. this keyboard isnt correcting what i type
have i done somtn wrong? i evn checkd both boxes in htcxt9 options in fingerkeyboard settings
using qvga
any help would be much apprecaited
htctoucher

Update[APP][11 Dec 09] TitaniumStarter 2.0 [WM6.5][Subfolder search]

Now 2.0 with subfolder search and much more - look at changelog
I made this Plugin, because I think it's very useful for me - and perhaps it's also useful for you.
Another Launcher? No - not like the Launcher, which are already available - I wouldn't have developed it otherwise - and I developed it mostly on my handy, because I hadn't much time the last weeks.
You can define in some Launchers what you want - but what about if you want to start quickly something, which is not in your Favos?
And how about a Keyboard direct in Titanium? (could tease some iPhone-Fans )
And therefore "TitaniumStarter" - to start everything quickly. Together with Favorites Plugin of contable and JMLLauncher from JMHL (and jmltoday) I got a wonderful "Launch suite"
Features:
- Keyboard direct in Titanium Panel
- Full animated switching between Keyboard and Results (it should look cool)
- Designed to launch quickly each program in Start Menu with direct accessable different input methods
- Installed by TICS_installer: So it will work in ALL THEMES not only Standard Titanium, also Blizz,Josito,... (if you want to make a special .plg for the keyboard in your favorite Theme, just give it to me, I will integrate it)
- ALL RESOLUTIONS: QVGA, WQVGA, VGA, WVGA
- ALL ROM-Languages - no dependencies to a country or WWE-ROM - it knows, where your Start Menu is to find
- Different type modes (left side of keyboard):
-- I = one letter will start search for all Programs in Startmenu with this abecedarian letter
-- II = one letter needs tab on "GO", after two letters automatic search
-- III = type the word as long you want - only "GO" initiates search
- Wildcard-Search - e.g. "*oo" in Mode III would find "Groovefish" as well as "Bluetooth Explorer"
- Launches programs/chooses letter after tab on plugin - possible because of AreaButtons of JMLPanex
- To erase last letter just click backward button in the bottom-right corner under "GO"
- to erase all input just click on current mode on left side
- ...little bit more- just find it out
Changelog & additional Features of 2.0:
- now can search all subfolders of Start Menu
- Search Algorithm written in C - so very fast search
- completely redeveloped data structure
- Adjustable Animation-speed (Set Animation Time not too low, to prevent Timeouts)
- Links can viewed with or without Folder Info
- Extra Design for Folder-View/Non-Folder View
- Context Menu to change Folder-View, Refresh,Animation-Speed
- After Start an Application, Plugin switch to Keyboard and refresh itself
- Skinable - only provide a new /image-Directory
- Little bit more, which I've forgotten now
AddOn: If your Animation is too slow - you can use smaller Images, which has been made by Jumba - just replace the Images with them from Image-Directory of TitaniumStarter.
Download: images_smaller_sizes_by_Jumba.zip
Requirements:
- Mortscript 4.2 or higher *Download Mortscript 4.2*
- JMLPanex >= 2.0 / better 2.10 *Download JMLPanex* for working Titanium-Buttons
I have some ideas for updates or for another usages of this - it's something what I have developed/will develop ocassionally.
TitaniumStarter is free und will stay free - please don't repost it without asking.
Install to Main Memory like every Titanium Plugin and of course: I overtake no responsibility for damaging your device (however this should go )
Credits:
JMHL for JMLPanex
MattJackson for Keyboard-Image
Mort for Mortscript
Hope you like it and its useful for you (or only to impress a little bit some iPhone-Users )
Micha
TitaniumRSS, TICS, TitaniumStarter, JMLLibrary and the other stuff-
Like my work? To spend much more nights, if you want, you can donate a cup of coffee for me.
.
Wishlist for next Versions:
- also scan Subfolders of Statmenu, that causes implicite: done 2.0
-- possibility to add subfolder-info to panel (on/off - perhaps smaller Font necessary) done 2.0
-- Refresh-Possibility to know Folders to scan done 2.0
-- List of Folders, which shouldn't be scanned
-- Context-Menu to do this done 2.0
- Last 6 runned programs on Page2 of Plugin
- Turn back to Keyboard after Running an app done done 2.0
- special support while installing different .plg's for different Themes
- adjustable Animation speed done 2.0
Wow that looks good Micha, have to try it right away.
Will report how it looks in the different themes.
Greetz Claus
I just installed it and have a question right away, this looks only under start menu and not in subfolders?
I have my shortcuts organized in start menu subfolders, and it does not find them.
Thanx for the nice words - glad that you like it
Look at Post #2: http://forum.xda-developers.com/showthread.php?p=4802002#post4802002
I've added a wishlist - and at first I will integrate subfolders, ok? (ASAP)
Animations are ok?
Micha
woooow, good jub
keep it up buddy
I just tried a lil,and I'll wate for you to support second language keyboard and second folder
if you want a chinese tester, I can help, just contact me
MichelDiamond said:
Thanx for the nice words - glad that you like it
Look at Post #2: http://forum.xda-developers.com/showthread.php?p=4802002#post4802002
I've added a wishlist - and at first I will integrate subfolders, ok? (ASAP)
Animations are ok?
Micha
Click to expand...
Click to collapse
Animations look very cool, for my taste i would make them just a little bit faster, on my device the panel takes 4 seconds to turn.
i love it already although currently its kind of unusable yet for me.
- subfolder problem as described above it just doesnt find anything
- when using wm 6.5.1 pressing a letter presses much higher than it should due to the bigger bottom bar. seems the settings need adjusting here somehow?
look forward to an update, thanks!!
pencilcase said:
i love it already although currently its kind of unusable yet for me.
- subfolder problem as described above it just doesnt find anything
- when using wm 6.5.1 pressing a letter presses much higher than it should due to the bigger bottom bar. seems the settings need adjusting here somehow?
look forward to an update, thanks!!
Click to expand...
Click to collapse
You can adjust the offset in Panex. - to go up and + to go down.
hi,
@pencilcase: offset of panex like claus said will solve your problem, and therefore that I have everything in my main folder,I didn't implement it in subfolder.but next version will do it,must only look for the speeed to find files while turning panel
thanx for the nice words
@claus: 4 seconds? ok,then animation speed will be adjustable in next version,too. on my diamond it's 1 second.i hope it's not exactly beetween turning in middle,because there is the folder-crawling,so that the speed of your file system is the cause.
@kane: of course I'd like to have chinese tester - but what do you mean with second language keyboard? what should I do? anothers layout or signs?
@all : only a question: in mode III - how "responsive" is your device? I mean-could you type fast longer text with this keyboard,too?
sorry 4 typos - only from handy online.
cheers
Micha
MichelDiamond said:
hi,
@all : only a question: in mode III - how "responsive" is your device? I mean-could you type fast longer text with this keyboard,too?
cheers
Micha
Click to expand...
Click to collapse
The keyboard is not very fast, immagine due to Panex response, phone keyboard is faster, but as only a few characters have to be typed it is no problem, and visually i like this onpanel keyboard better.
therefore I asked-on my Diamond I could write quite fast also longer notes/text - how much MHz is your processsor or do you have running mortscripts besides,which slow down system performance?
because of subfolder search: I mentioned this would be too sloww while animation in Mortscript.
So I will develop it in C as sub-process to animation.
that's not possible on my handy,so it will take a litttle more time,until I'm back @home.
but then it should be fast enough to search recursively.
@all: please tell me also the responsiveness of the keyboard-together with yyour device type and processsor speed.
Micha
Once again great work, Micha !!!
Here is the link to my new thread:http://forum.xda-developers.com/showthread.php?p=4813673#post4813673
Greetz
contable
for chinese virson i mean the keyboard can also support typing chinese
I know it sounds like almost inpossable....., but if there's a opportunity I'll catch it
but really need this tool to support secend(third, fourth) folder in start menu, this is the most important, and i have to say, good job MichelDiamond , keep it on
@contable: Great FavPeople&Launcher with Multi-Buttons-Plugin - cool! ( & you have a PN)
@Kane: Oh - the chinese keyboard would be interesting. I have 27 buttons - would that be enough? Perhaps we can work together, to get a chinese Variation of it Do you have a screenshot with a comparison of english and chinese keyboard?
And to "second","third" folder - like I said: Mortscript would need roundabout 2-5 seconds to find everything (on my Diamond) - so I have to do it in C... better: had to do it in C - I must think about my last developing of a recursive function, which has to be fast... but I'm roundabout 30ms for 250 Links in Startmenu in all subfolders
But therefore I had/have to change the whole data structure of TitaniumStarter, too... and have to change a little bit the design to make folders visible... and add a Menu to switch on/off Folder expansion.
And that I'm about to do - I had not very much time the last days - but recursion works really fine
From outside - the Panel will look quite similiar to 1.0 - but inside there are very much changes - it's like a new Panel
Need only a little bit time to do this all - but won't take very long - depends on my office
If somebody has more ideas for later, just tell it. Let's see what such a "fun work" will produce
Greetz
Micha
ok, here's 4 of chinese input keyboard , choose one
but i prefer to use the last one for Chinese Traditional and second one for Chinese Simplified.couse the first one and third one there's not much ppl use it
jejeje I know it looks complex,and it really are,chinese input not like english
a=a and if you want to type "apple" you just need to type apple on the keyboard chinese keyboard is like this if you want to type 我(me) you have to type ㄨㄛˇ then there's some words pup up like 我 婐 捰 they all sounds like ㄨㄛˇ
jejeje when i type here I found chinese Variation is almost impossable
but if you can make it possable , please please tell me, I'll do whatever i can to help you
and I have a new suggestion
why just limit this wonderful tool in start menu??
why not let ppl choose what folder they want to search?
and you can set dafult folder in Program Files both in Storage card and main
I suggess this is because there's a lot of non-install apps out there , and it's tired to link them all to start menu
hope you dont think I'm crazy
if you want my MSN skype or google wave, just sent me a PM ok? I'll do what ever i can to help you
That looks very complicated
To make a Keyboard is not the problem - but to know which Key is signed with which Letter. The Filenames are the same?
And your proposal with other search locations: Yes - that's possible with Data structure from 2.0 - but there are expansions needed - e.g. to search or... "what" .exe .* .dll .... and so this should be a new Plugin. The search will also take longer - depends on the size of the files on the search location. Perhaps there should be a favorite Folder-Init... and much more. (already thought about to write SMS with this Keyboard? *g* )
I only have too much projects and work at the moment - ut I won't forget it - perhaps we could do it together (the chinese keyboard, too Would you look a little bit how the keyboard works? Panex can't overgive Parameters to .mscr - so it's easy to read )
Ah - I forgot - 2.0 is finished *g*
It's done - 2.0 is online to free download now!
The Subfolder search is now implemented-was completely rewritten in C, to be fast (Mortscript would have been too slow for such recursive search op's)
Further you now have a Context Menu to adjust animation speed or switch between Subfolder View and Program-only View
much more - see changelog and picture below or in Post #1
Changelog & additional Features of 2.0:
- now can search all subfolders of Start Menu
- Search Algorithm written in C - so very fast search
- completely redeveloped data structure
- Adjustable Animation-speed
- Links can viewed with or without Folder Info
- Extra Design for Folder-View/Non-Folder View
- Context Menu to change Folder-View, Refresh,Animation-Speed
- After Start an Application, Plugin switch to Keyboard and refresh itself
- Skinable - only provide a new /image-Directory
- Little bit more, which I've forgotten now
Have fun - and thanx for the big feedback!
Micha
TitaniumStarter V2.0: real improvements !!!
Thanks Micha !
MichelDiamond said:
It's done - 2.0 is online to free download now!
The Subfolder search is now implemented-was completely rewritten in C, to be fast (Mortscript would have been too slow for such recursive search op's)
Further you now have a Context Menu to adjust animation speed or switch between Subfolder View and Program-only View
much more - see changelog and picture below or in Post #1
Changelog & additional Features of 2.0:
- now can search all subfolders of Start Menu
- Search Algorithm written in C - so very fast search
- completely redeveloped data structure
- Adjustable Animation-speed
- Links can viewed with or without Folder Info
- Extra Design for Folder-View/Non-Folder View
- Context Menu to change Folder-View, Refresh,Animation-Speed
- After Start an Application, Plugin switch to Keyboard and refresh itself
- Skinable - only provide a new /image-Directory
- Little bit more, which I've forgotten now
Have fun - and thanx for the big feedback!
Micha
Click to expand...
Click to collapse
cool Micha, let me try 2.0
animation is wonderfol
very fast
and I'm trying to set the folder, I can only set one folder right?
mmmm and what can I help you ?

[APP] Swype | Project canceled. Please don't support this

Move over T9, here comes Swype
Swype works with an on-screen QWERTY keyboard like you have on the tablet version of Windows and on the iPhone. But instead of tapping letters out, you press your finger or stylus on the first letter, then, without lifting it, move it to the remaining letters in the word. When the word is done, then you lift.
It works. Even on tiny small screens, it is intuitive and fast, and you don't even have to run the tutorial. Basically, it's an amazing new input method.
A built-in 65,000-word dictionary corrects obvious and even creative spelling errors. A word menu pops up if the correction is somewhat ambiguous; in our tests, the top choice was usually correct, and it can be selected with a simple swipe upward.
Little tricks make it possible to capitalize words (jerk the stylus up and down) or select double letters (wiggle the pen over a letter).
You can type 55 words per minute on his product. Discount the developer's advantage: Real human beings should be able to motor along at about half that, we estimate. *From Cnet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main features are...
Simply Trace a Path
The word “quick” was generated from tracing the path shown above in a fraction of a second, by roughly aiming to pass through the letters of the word. A key advantage to Swype is that there is no need to be very accurate, enabling very rapid text entry.
Fast!
You can go fast and be sloppy. There’s no need to try to accurately hit each key. Just make a reasonable effort to trace through the word and Swype will do the rest.
Easy to Learn
The keyboard layout is QWERTY, so there is virtually no learning curve if you’ve already learned to type on a regular keyboard.
Natural Feeling
The smooth motion of sliding from letter to letter feels very natural, not to mention fast.
Finger-Tip Operation
Swype can be used equally well with either a stylus or your fingertip. You don’t have to be precise; so even if you have a large finger that partially obscures the keys, Swype still works!
Auto-Spacing
You can go even faster since Swype automatically enters spaces for you. (Spaces are prepended in front of each word entered by Swype).
Auto Spelling Correction
Not only can you go fast and be sloppy, in most typical cases, Swype will even correct misspelled words. For example, trace out “freind”, and Swype will automatically generate “friend”.
Capitalization Shortcut
Save time by capitalizing any letter in a word with a simple gesture: just slide from the letter to off the top of the keyboard and then continue entering the rest of the word.
65,000-word Learning Dictionary
Chances are the word you are typing is already in the Swype dictionary. But if it isn’t, just tap it out once followed by a space, and Swype will automatically learn it for next time.
Statistical Tracking
Keep track of your speed using Swype’s built-in statistical tracking.
Accented Characters
Words with accented characters (“diacritics”) require no special action - just Swype the word and the correct spelling will be entered. New words with accented characters can by typed by tapping and holding on the letter to see all possible variations.
Over 50 Symbols
Most common symbols are on the main keyboard layer and can be quickly entered by tapping on the key and sliding off the top of the keyboard. Many other symbols are readily available on Swype’s second keyboard layer.
Automatic Help
Swype detects when you may be having trouble or might be able to benefit from a particular feature, and prompts you with helpful tips and instructions.
Interactive Tutorial
Get up-to-speed quickly with the fun and fast Swype interactive tutorial.
Advanced Features
When the Swype software is first started, it runs a short piece of test code to estimate the overall speed of both processing and file access in its current environment. This estimate is used to establish a default value for a “Swype Operation” parameter that can be adjusted by means of a slider control displayed in the user options.
Input Slider
The slider is labeled at the far left with “Faster Response” and at the far right with “Sloppier Input.” This slider setting controls a broad range of internal parameters that determine the breadth of the initial database search to identify the most likely matching word for each entered input path. It also controls a large number of other thresholds, such as how close the path needs to come near a key in order for that key to be potentially considered as a “match” to the path at that point. The slider is initialized to the determined default value, which results in an average response time of less than 250 milliseconds. This means that, on average, Swype will generate the intended word for an input path within ¼ second of when the stylus or finger is lifted from the screen at the end of the path
Speed and Accuracy
Swype is faster than existing text entry methods because it has built-in intelligence that does not require users to hit each letter accurately. Also, tracing a smooth, continuous path is much faster than “target-tap-lift-target-tap...”. Even novice users can quickly achieve sustained data entry speeds of over 40 words per minute.
Swype's official website
Swype on FreewarePocketPC.net
I ported Swype to all popular resolutions. It was dumped from Verizon Omnia II by GinKage at Modaco and first CAB file was released by sorg. I played with graphics and settings to make it compatible with other screens. From Swype.dll looks like that product version is 2.0
Verizon ROM extract thread in Modaco:
Code:
http://www.modaco.com/content/i8000-omnia-ii-gsm-rom-discussion/297290/verizon-rom-extract/
Right now there are two different dictionaries in app. English and Spanish. There are also activities in creating new dictionaries for Swype (Check 3rd post)
Check second post for more information and download links.
Developers and experts call, Please help us reach our goals. Any suggestion and/or comment is appreciated and welcome.
Credits to:
GinKage @ Modaco for dumping the ROM from Verizon Omnia II
sorg @ Modaco for being the first one to release a CAB
The guy @ Facebook who created this!
* I am not the developer of this application. All I did was making it compatible with other resolutions.
2nd Post
Information and Download
Specifications:
An application requiring from 500K – 900K (depending on options, when compiled for the Windows Mobile platform).
65,000-word language database with an average size of approximately 250K.
Input path analyzer,
Word matching search engine with accompanying word database,
User interface – which is customizable by OEM’s.
Features:
Over 40 words per minute on touchscreen devices
Standard QWERTY layout
Use a stylus or finger
Ideal for all screen sizes and resolutions
Multiple languages compatible
Supports common editing actions
Patented
Single Tap Predictive Text
Easy tips and tricks to Swype faster
*Holding extra long on a letter shows all variants that it has (In other languages)
Current language databases:
English
Spanish
Known issues:
The programs may have conflicts with latest 6.5 builds.
The program might not work on some none WWE ROMS.
Overlap in some 6.5 ROMs.
Swype’s built-in statistical tracking doesn't work.
Goals:
Editing .zdb.le files. (.zdb.le files look like main dictionaries of this application, By editing it we are able to add more languages. Their structure is still not described.
Making the program compatible with most applications.
Fixing overlap in some 6.5 ROMs.
Must do/have:
Install to device memory
2mb free memory
Touch Screen
If you are using this input in none WWE ROMs, Copy whole Swype folder from your locale programs folder to /Program Files/ (Device Memory) to get this working. (Solved with new CAB files)
A soft reset feels good after installation (Not necessary)
Change log:
13 Dec 09
- Hard-coded path is now active for none WWE ROMs (Dictionaries are not changed , But the application installs correctly in ROMs with locale program folder )​- Attached files and 4Shared mirrors updated to new CAB files​
14 Dec 09
- An experimental way is founded to add Dictionaries manually.​- Spanish, French, Portuguese & Italian vocabularies are added to the third post to be tested.​
A message from Swype developers:
We see you have re-packaged our software and are distributing it. We are glad to hear that you guys like Swype, but we are obligated to state that we don't condone such activity nor support the result. Naturally those of you asking for new languages and features should wait until we launch a device in your market. Obviously, we won't support unlicensed versions of our software. One might ask why we don't just release the .cab file ourselves and save everyone the hassle. The reason is that we have spent seven years building Swype and we want to try to make a living selling our software. That means someone needs to pay for it. Thus far, our business model is OEM licensing. We do plan to get to direct-to-consumer distribution but it is a different sort of business and thus it is hard to say when. In the meantime, enjoy using Swype and please look out for a better, more integrated, and legal version coming soon to a phone near you.
Regards,
The Swype Team
PS. Our lawyer has asked us to remind everyone about copyright infringement and to inform you that Swype reserves all of its rights.
Click to expand...
Click to collapse
Downloads removed
Mod Edit: Removed remark to Swype as Offensive
*To make Swype your default keyboard you can use applications like SIPChange or PPC Configurator
**Please report your experiments and issues here and contribute in making this app better. Also if you find any bug or feature that is not listed in this post please report and describe it.
3rd Post
Dictionaries/Importing
How to add custom dictionaries:
If You have created an eBook from few books or have a list of words in your language or you use vocabularies below:
Open ebook or text file in any text editor.
Highlight some text and copy it.
Paste into the SMS or Email editor (New SMS, New Email).
Highlight text again and tap Swype key to add the text in database.
*It doesn't work in anything except SMS editor (New SMS window).
*Some words in other languages contain letters that are not listed in Swype (Not even in letter's variant list). Words containing these characters won't be added to Swype database. Try to make them as simple as possible so you can add them to Swype.
*We still need to find a way to open and probably decompile .zdb.le and .zkb.le files, that contain dictionary and keyboard settings.
(Credits to inmatrixout, Original post here)
How to replace your userdata.udb?
Userdata.udb is the database that contains your custom words. You can replace you userdata.udb with a new one with custom words in other languages. As userdata.udb is locked as being in use, follow the steps below for the easiest replacing method.
Rename old userdata.udb to userdata.bak (you cannot delete it, but you can rename it)
Copy the new userdata.udb to $SWYPEHOME directory
Soft-reset your device
(Credits to Sir.John, Original post here)
How to create vocabulary list?
Help us by sending us the vocabulary list/dictionary of your language. You can download most of them from this link and you have to convert them to .txt file to be able to use them because words in .dic file are attached to each other in single and copying it to SMS editor wont help as it's just a block of texts. There has to be a space between words or each word has to be written in a separate line to be recognized by Swype. To convert .dic to .txt files with separated words you can use procedure below.
Open the DIC file in Notepad ++.
Choose "Convert to Windows Format" from "Format" or "Encoding" menu.
Wait for the process to complete.
Check the last line, Last line should always contain a word, Neither a space nor a symbol. If it contains symbols or empty line clean it.
At last save the file as TXT.
Dictionaries:
Spanish Vocabulary (TXT Format - 91836 Words without letters)
French Vocabulary (TXT Format - 136625 Words and letters)
Portuguese Vocabulary (TXT Format - 385681 Words and letters)
Italian Vocabulary (TXT Format - 277312 Words and letters)
German Vocabulary (TXT Format - 532267 Words and letters)
Swedish Vocabulary (TXT Format - 118271 Words and letters)
German Database (UDB Format - apsis)
German Database (UDB Format - laureus)
Dutch Dictionary (TXT Format - Flip-Oh)
*Opening these files in a Pocket PC text editor takes minutes, You can break them into parts or open them in a single file.
*To open these files faster in PC you can use advanced text editors like Notepad ++.
just tried....
hirad_sabaghian said:
looks like no one likes this! lol
Has anyone even tried this?
Click to expand...
Click to collapse
I just installed and it wont work for me
It installs fine and when i go to settings/personal/input....it is there, but when I select it and then click okay and exit, it reverts back to my standard EZ INPUT keyboard
Perhaps its my ROM? or winmo 6.5.3?
acidbath5546 said:
I just installed and it wont work for me
It installs fine and when i go to settings/personal/input....it is there, but when I select it and then click okay and exit, it reverts back to my standard EZ INPUT keyboard
Perhaps its my ROM? or winmo 6.5.3?
Click to expand...
Click to collapse
set your keyboard to windows mobiles default keyboard by changing registry or using apps like SIPChange. Then restart windows. wait for os to completely load up. then try it and report back.
I just installed this keyboard today on my fuze and touch pro 2. This is by far the best vitual keyboard ever!! I can finally type with one hand in super fast speeds. and it's pretty accurate too! This is awesome!
Is there a way to add words to the dictionary?
Awesome man i was just waiting for qvga now downloading if it works i will cook it into my rom
Is there a way to add words to the dictionary?
Click to expand...
Click to collapse
Just tap it out, it will remember after that
This is great. Thanks.
amazing. works great on my htc vogue with winmo6.1.
amazing app! works great on HTC Fuze WM6.5
Can some one confirm this whether HTC XT9 will still pop up with its suggested words using the cab file here?
It happens to me. I installed the one from Modaco. This makes Swype really sluggish.
Any solution?
Nice to hear that swype works fine for most of u guys.
Can some one confirm this whether HTC XT9 will still pop up with its suggested words using the cab file here?
It happens to me. I installed the one from Modaco. This makes Swype really sluggish.
Any solution?
Click to expand...
Click to collapse
Try these CABs. I have both keyboards but the problem doesn't show up.
Works fine on my Acer F1 (WVGA) on latest official rom and tested on 6.5.3 (cooked rom) before with success.
Thanks.
Nice to hear that
P.S. Download files are attached to the second post.
Thanks for this. The QVGA seems to be working well on my Hermes. I tried slideit about a year back, but didn't find it accurate enough. This seems much better and I'll trial it for a few days.
Great app. Thanks !
Waiting for italian dictionary !
Can i be of some help ?
TheMac
themac said:
Great app. Thanks !
Waiting for italian dictionary !
Can i be of some help ?
TheMac
Click to expand...
Click to collapse
Check main goals in second post and see if you can help. if so contact me with pms.
Sian said:
Can some one confirm this whether HTC XT9 will still pop up with its suggested words using the cab file here?
It happens to me. I installed the one from Modaco. This makes Swype really sluggish.
Any solution?
Click to expand...
Click to collapse
I think i found a solution for you. Disable and remove XT9 using tweak apps. Disable word suggestion in input settings. Using Sipconfig set Swype to default keyboard and set the timeout to 50. restart and hope it works.
When I select swipe, whether trough the setting menu or trough the sip shortcut it hangs. Does anyone knows how to fix?
Thanx.
Touch HD, orginal dutch rom.
MDA_newbie said:
When I select swipe, whether trough the setting menu or trough the sip shortcut it hangs. Does anyone knows how to fix?
Thanx.
Touch HD, orginal dutch rom.
Click to expand...
Click to collapse
check second post "Requirements"

[Q] Looking for a calculator

Hey guys, I'm looking for a calculator for windows mobile 6.5 QVGA (shareware or freeware) that is:
1. Finger friendly
2. Display the calculation in 2 line, first line show what I input (for example 98/(10+3+15)), and the 2nd line show result, just like Hicalc from PPClink
3. Save recent calculations
I want it to save the whole calculation and result, like 98/(10+3+15)=3.5
So it's like Hicalc Arithmetic mode, plus the ability to save recent calculations
Spacetime is good and it save calculations but it's not finger friendly, very hard to enter data on my small QVGA screen
If anyone know about a calculator like this please let me know. Thanks a lot
I think what you want is IGCalc. It's a skinnable calc that does exactly what you are asking for.
probably bit more than you are asking for, but take a look at SpaceTime
SpaceTime has many nice features, the only problem for me is the small buttons (my screen is QVGA), but I still install it in case I need some advance calculations
IGCalc is great, it does just what I want thanks a lot Ummagumma
It even has some nice skins and functions
I search in freewarepocketpc and try googling all day but couldn't find what I want, but IGCalc is really the one, you did me a great favor.
(Sites that have IGCalc are in Russian, no wonder I couldn't find it )
For those who want it, here is the link:
http://4pda.info/news/2220/
You're welcome. There are some very beautiful skins for it, the default one is kind of fugly. Just make a search for "IGCalc Skins".
Yes, I found some nice skins in this topic:
http://4pda.ru/forum/index.php?showtopic=113415
Took me a while to register on 4pda.ru, but worth it
the java fx for wm dev includes an awesome touch calculator-
JavaFX Mobile - At a Glance
JavaFX Mobile is a complete application platform for mobile devices
@:java.sun.com/javafx/mobile

Categories

Resources