I installed the lite'ning Rom. Everything works fine, now I saw in an other forum that i have to wipe my dalvik cache and my partition cache after flashing the device. I saw that two days after I flashed it, and wiped those caches. Was that a mistake?
I hope you will help me with this noob question
Anil.
you have to wipe before flashing the ROM so you can make a fresh (bug free hopeffuly) start .Enter CWM - wipe(i wipe all) - than flash the new ROM (.zip)
Don't worry they rebuild themselves .
jje
Sent from my GT-I9100 using xda premium
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium
hi i have galaxy sii gt i9100 everytime i flash a new rom or or update a rom using cwm and restart it my phone hangs at startup everytime and starts only when i wipe my data...any idea whats happening? plz help
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
jiffer1991 said:
Hey
wich rom did u flash?
Have you already tried to whipe the cache partition in cwm?
Click to expand...
Click to collapse
happens with almost every rom...i've tried everything wipe data/factory reset, wipe cache, wipe dalvik nothing works!!
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
olawp said:
Do you wipe data,cache and dalvik before flashing?
Try to wipe data,cache and dalvik after you installed a Rom
Click to expand...
Click to collapse
done that doesn't work!
Does it start normally after you wipe after you flashed?
I would try to flash stock 2.3.5 GB or 4.0.3 ICS with stock recovery and the flash cf root with odin.
Try this and then try flashing some roms
Hello. So i am on the Omega ROM v5.1 and wanted to confirm in regards to updating the same ROM or flashing a new ROM. After researching the site, I was able to get the information that:
1. Updating same ROM: All that is needed before installing via recovery is a cache wipe and a dalvik cache wipe right? For example updating to Omega v5.1 to v5.2.
2. Flashing different / new rom: You need to wipe cache and dalvik cache AND do a factory reset / data wipe.
Please let me know if I am correct in both 1. and 2. situations. Thank in advance for all your input!!
yes you are right that is what iv always done unless del recommends a full wipe . updating on omega you should be ok just wiping dalvik cache and battery stats iv always done it like that unless changing roms then wipdata factory reset is used as well good luck
Sent from my GT-I9300 using xda premium
Thanks soo much for your reply!! I was pretty sure i was correct, but wanted to double check so i dont mess this expensive phone up
i had a problem after flashing the rom a backgroung picture came up and i could't se my on lock cirkle, and i can see other have the same problem, i went to recovery mode and did a full clean and flashed a gain and all problems solved..
Sorry for my english
Schoubrian said:
i had a problem after flashing the rom a backgroung picture came up and i could't se my on lock cirkle, and i can see other have the same problem, i went to recovery mode and did a full clean and flashed a gain and all problems solved..
Sorry for my english
Click to expand...
Click to collapse
My methods is always perform a factory reset , wipe cache & dalvik cache for clean installation before flashing any rom. Just flashed this rom and its working flawless! Really great job from nguyenxuanhoa :good::good::good:
Carson_ls said:
My methods is always perform a factory reset , wipe cache & dalvik cache for clean installation before flashing any rom. Just flashed this rom and its working flawless! Really great job from nguyenxuanhoa :good::good::good:
Click to expand...
Click to collapse
i did a factory reset and wipet cache & dalvik and all the things you should do but it failed the first time, but the second time its all good.