Related
Is it just me or is anyone else unable to roam on verizon towers after the new rom/radio upgrade (3.16/3.27)? I get a recording while roaming "Welcome to Verizon Wireless, We're sorry, we're currently unable to authenticate your phone, Please try your call again. If you continue to experience problems please hang up and dial #8899 from your wireless phone"
Any help is appreciated.
Thanks
What PRL do you have?
I never tried making calls but I don't roam on their towers anymore when it comes to data. I just get the triangle and 1x and no web browsers will let me connect to any sites. I kinda just gave up on it since I only needed it in the DC Metro.
I can roam with the new rom. im using prl 60610 and data roaming works as well.
kind of ironic because it didn't work before for me
1X roaming works on Alltel and VZW with 60610 and 3.x ROM here, but EvDO roaming is a no go on Alltel, even though it works fine with 60610 and 2.x ROM.
I guess you are not the only one having the problem. it's a no for me for both prl 60610/60611.
However I am only having the problme at home. I can roam onto vzw at different locations (voice and 1x data) $%^%^&#!$#@!$
People say it may have something to do w/ a-key which is blank on my phone ...
TopGun2000 said:
I guess you are not the only one having the problem. it's a no for me for both prl 60610/60611.
However I am only having the problme at home. I can roam onto vzw at different locations (voice and 1x data) $%^%^&#!$#@!$
People say it may have something to do w/ a-key which is blank on my phone ...
Click to expand...
Click to collapse
Using PRL 60610. I downgraded my phone back to radio 1.40 and it worked fine but it will not work with the new one. I guess roaming had to be given up for GPS.
Problem Solved. Seems like Sprint's System wanted to do the PRL update themselves for record purposes because after I got the rep to shoot a new prl (60611) roaming worked. I then downgraded to 60610 (best one for me) and viola it stuck. everything is working now.
keeepinitgansta said:
Problem Solved. Seems like Sprint's System wanted to do the PRL update themselves for record purposes because after I got the rep to shoot a new prl (60611) roaming worked. I then downgraded to 60610 (best one for me) and viola it stuck. everything is working now.
Click to expand...
Click to collapse
Ok, so how did you fix this again? Can you give me the current setup of your phone or the steps you took to get to where you are?
Here is what I have done so far:
- Flashed from 2.17/1.47.1 to 3.16/3.27 and got the no Verizon roaming issue you described.
- Figured it was an issue with the new ROM, so I then downgraded back to the stock 2.17/1.47.1 ROM from the HTCAmerica website. (The downgrade wiped all my settings for MDN and MSID) However, the issue persisted.
- I updated the PRL to 60611. Still no luck.
- Called Sprint, who initiated an over the air PRL update of their own to 60611. Still no Verizon roaming. Sprint says they are "investigating" and will get back to me, whatever that means...
The only other thing I can think to do is to downgrade again back to 2.09/1.40.
Also another question, when you view ##778#, does your phone show anything on the "A-Key" page under the "Authentication Key" setting now that you have roaming working? Mine is currently blank, and I have read a couple threads talking about needing to figure it out, but those users all seemed to be Verizon customers. I would be interested to find out if Sprint customers have that setting or not.
This issue is driving me nuts, and any help is greatly appreciated.
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
aatreya said:
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
Click to expand...
Click to collapse
Wow. Genius! Got Sprint technical support on the phone and asked for the "HLR Reload." The guy knew exactly what I was talking about and was able to do it right away. I am now able make calls and get data while roaming (currently using 2.17/1.47.1).
Thanks again!
glad to know it worked
rfrankli said:
Wow. Genius! Got Sprint technical support on the phone and asked for the "HLR Reload." The guy knew exactly what I was talking about and was able to do it right away. I am now able make calls and get data while roaming (currently using 2.17/1.47.1).
Thanks again!
Click to expand...
Click to collapse
wow, now i know what i need to do w/ my 3.16 rom
edit: got a call from spint. the tech guy said that he found an authentication failure on my account and reset it. will test the roaming again when i get home. he also had no clew what the "HLR reload" is...
edit2: whatever reset sprint did at their end seems to work. voice/1x roaming is working now, still no evdo though.
Still wont work for me *sigh*
aatreya said:
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
Click to expand...
Click to collapse
I called and had them do this, but i had no luck. Still no EVDO roaming in places where there should be. I can make and recieve roaming call and data roam in 1X but evdo is gone. This is on both the 60610 and 60611 PRL. EVDO roaming worked on both PRL's with the 1.47 radio and 2.17 rom.
Any more ideas?
well I thought I didn't have these problems, but now I'm not certain. I don't think I've ever been able to EVDO roam on verizon, at least not sice I started paying attention which was already after moving to a 2.17 with 1.40 radio and orginal PRL. I know verzion has evdo in this area, but sprint doesn't. Maybe there is no agreement here for evdo becuase of that? I guess it couldn't hurt to try this trick and see if I get it.
I found more problems using 3.16. I did encounter the roaming authentication error. So I called, got the HLR reload. That made things MUCH worse. Now nothing works. My MSID and whatnot are all correct and I see signals, but can't make calls or data connections. Sprint tried some things but nothing worked. I'm going to do a hard reset and see what happens.
Sprint was surpisingly willing to work with me knowing that I am using the test rom though... but in the end still suggested I revert to an official rom when nothing worked out.
Anyway, not sure I'd reccomend the HLR reload on the 3.16... try at your own risk.
holy crap
sorry to hear that
if you get it figured out, lemme know what fixed it.
I suspect sprint just hit the wrong button. I hard rest... still no dice, but I noticed that dialing *2 does work.. normal numbers and network don't. Seems like an authentication issue. I doubt seriously it has anything to do with the rom, but I just flash 2.17, casue otherwise I don't hink I'll get far with sprint.
Now when I try to make it call it tells me the phone has not been activated. (with 3.16 I just got the call end dings imeediately)
SO when I fix this and flash back to 3.16, will I dare to try this again after roaming gets broken again?... tough call.
Edit... still need to fix MDN and MSID in the 2.17 .. more soon.
Edit: fixed MDN and MSID in 2.17... now having the same problem as in 3.16... ding ding ding... no call. Looks like I have to call sprint again.
ON the phone with sprint now. Have rebooted for them a couple of times. This guy is still stumped and he doesn't seem generically ignorant.
I started a new thread for my issue.
http://forum.xda-developers.com/showthread.php?p=1881522#post1881522
You might want to read it before doing any HLR updates in 3.16 though. I'm on my third rom today and a few hours with sprint tech and I still can't make calls.
(EDIT
SOLVED... see above thread. It seems they messed me up badly when they did the HRL reload... however.. it doesn't have to be done badly... at least now we know the fix if it happens to someone else.. so don't let my experience stress you too much. Now to upgrade roms again.
and voice roaming works now..
Roaming not working
ahhh!!! after the upgrade, i cannot roam on vzw...
Called and spoke to several reps... no one knows what HLR Reload is... according to them turning the phone off and taking out the battery for a few minutes will force the HLR reload....
I don't know what to do.... These reps are impossible to deal with.. Anyone have any suggestions?
Ok...so I know there are other threads...read them all about this and Ive tried 3 times with Sprint updating and changing the MID number, PRL, Data reset but I still cant connect to roam. There suggestion was to swap the phone out but if I do that and reroot wont I be back in the same boat? What fix am I overlooking here? Thx
neopolotin75 said:
Ok...so I know there are other threads...read them all about this and Ive tried 3 times with Sprint updating and changing the MID number, PRL, Data reset but I still cant connect to roam. There suggestion was to swap the phone out but if I do that and reroot wont I be back in the same boat? What fix am I overlooking here? Thx
Click to expand...
Click to collapse
Dunno here, but I'd give it another shot. After I rooted and got a signal 16, I just stayed on the line, followed the instructions given, and was back up and operational within 2 minutes.
Note, though, that Engadget had a post saying that they were going to be pushing an update to the Evo3D in the next couple of weeks. The story also had a suggestion that it may close off the S-OFF/Root hole that the Revolutionary team found.
bit_boy said:
Dunno here, but I'd give it another shot. After I rooted and got a signal 16, I just stayed on the line, followed the instructions given, and was back up and operational within 2 minutes.
Note, though, that Engadget had a post saying that they were going to be pushing an update to the Evo3D in the next couple of weeks. The story also had a suggestion that it may close off the S-OFF/Root hole that the Revolutionary team found.
Click to expand...
Click to collapse
Well thats just sketchy on their part. lol
I was having the same problem. I was forcing Roam using Roam Control and when I did I was unable to place calls and received a Verizon Error message. Also 3G roaming data would not work. I could only receive calls while roaming. Here is what i did to fix it and I think it may be a combination... I reflashed the ROM I am using (ViperROM 1.3) and it still didn't work. So at a complete loss, I called Sprint. The sprint support rep said they have acknowledged a problem with the EVO 3D not roaming correctly. She had me make sure that the Roaming was set to Sprint Only, not automatic. and then she had me power down and pull battery. Once my phone came back up, Roaming worked!! I'm thinking she did something on her end to make it work. Also the dev for Roam Control, MrGreg said that there have been a lot of reports that Root messes up Roam Control on the 3D.
jerichey said:
I was having the same problem. I was forcing Roam using Roam Control and when I did I was unable to place calls and received a Verizon Error message. Also 3G roaming data would not work. I could only receive calls while roaming. Here is what i did to fix it and I think it may be a combination... I reflashed the ROM I am using (ViperROM 1.3) and it still didn't work. So at a complete loss, I called Sprint. The sprint support rep said they have acknowledged a problem with the EVO 3D not roaming correctly. She had me make sure that the Roaming was set to Sprint Only, not automatic. and then she had me power down and pull battery. Once my phone came back up, Roaming worked!! I'm thinking she did something on her end to make it work. Also the dev for Roam Control, MrGreg said that there have been a lot of reports that Root messes up Roam Control on the 3D.
Click to expand...
Click to collapse
Just to clarify, I wouldn't say that rooting affects Roam Control specifically, but it affects roaming altogether. This was a pretty typical problem with the original EVO as well. Sprint is usually able to fix the "unable to authenticate" problem if you give them a call.
jerichey said:
I was having the same problem. I was forcing Roam using Roam Control and when I did I was unable to place calls and received a Verizon Error message. Also 3G roaming data would not work. I could only receive calls while roaming. Here is what i did to fix it and I think it may be a combination... I reflashed the ROM I am using (ViperROM 1.3) and it still didn't work. So at a complete loss, I called Sprint. The sprint support rep said they have acknowledged a problem with the EVO 3D not roaming correctly. She had me make sure that the Roaming was set to Sprint Only, not automatic. and then she had me power down and pull battery. Once my phone came back up, Roaming worked!! I'm thinking she did something on her end to make it work. Also the dev for Roam Control, MrGreg said that there have been a lot of reports that Root messes up Roam Control on the 3D.
Click to expand...
Click to collapse
Well I couldnt get it to work on viper, Helicopter or Joelz.....Im going to try synergy since it says it cleans up some of the root method....maybe that will help. I never once got a rep saying they knew there was a roaming problem...
Ok so I got roaming to work...I asked the lady at sprint to do the profile update and HLR reset then I asked for a ESN refresh....he supervisor then got on the line asked how he could help. After he gave the spill about them not promising roaming will work all the time I told him I don't understand how an EVO sitting next to my 3D could roam perfectly fine and mine not. He said he would refresh everything on their end including ESN. I left my phone off for a few mins and now I can roam perfectly fine!
Sent from my PG86100 using XDA Premium App
Had the same problem and after multiple calls to sprint with no help, I figured I would try to reset the phone and do a hands free activation. After I did this, everything has worked fine and roaming/calls/text have been perfect.
Note you must know your MSL to do this and be on Sprints network. You can call sprint for your MSL, or if you have root/s-off you can download MSL reader from the market
https://market.android.com/details?id=com.esccode.msl&feature=search_result
1. Go to data menu by entering ##3282# on the dialpad.
2. Click on "Edit Mode".
3. Enter your MSL # and hit "OK"
4. Choose "Data Profile".
5. Press your menu button on the phone and select "Restore" from the menu that appears. Then hit "OK.
6. Phone should reboot.
7. It should start hands-free activation.
Hope this helps.
I was getting this error. I called sprint, and they said it was an outage, it should be fixed in x, days, and told me I was entitled to compensation. They gave me a $25 credit for it. It's not a whole lot, but I'll take it.
I had the same problem...I did the Sprint Chat and asked for an HLR refresh, and that fixed it!
just do a sprint chat and tell them you have a error 16 they will tell u to hold on a min then they will tell u what to do and after that it will be fixed
neopolotin75 said:
Ok so I got roaming to work...I asked the lady at sprint to do the profile update and HLR reset then I asked for a ESN refresh....he supervisor then got on the line asked how he could help. After he gave the spill about them not promising roaming will work all the time I told him I don't understand how an EVO sitting next to my 3D could roam perfectly fine and mine not. He said he would refresh everything on their end including ESN. I left my phone off for a few mins and now I can roam perfectly fine!
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Thanks I requested the HLR refresh and it worked!!!
I had the Verizon roaming authentication problem and made several calls to support with no meaningful progress (one rep told me to bring the phone to a store for an update). Then I chatted with a rep tonight and asked them to perform a CHLR refresh and reload my ESN. They had me pull the battery and the phone updated on reboot. Roaming finally works again.
I called and had a reset done and now I am stuck in 1x data hell roaming and not. Anyone else have that problem, I think I am gonna have to call back today and have them undo whatever they did.
Sent from my PG86100 using XDA Premium App
allu have to do is a chat online with sprint and tell them u have a error 16 they will do there magic and fix ur phone the error 16 fix works for kust about everything
My co-workers phone service got cut off recently, and after it was re-connected, she lost 4G. I had her on Synergy 255 and had the latest radios I found which was CDMA: 1.48.00.0906 LTE: 0.01.78.0906. Even when I updated her to Synergy 262, the problem persisted.
Anyone know what might have happened, I know the recent OTA update for gingerbread has been giving people problems, is it possible the OTA update problem also affected her phone since she was already in gingerbread?
I just put BAMF Forever 1.0.7 on her phone, and it's still only able to connect to 3G, is the problem on verizon's side?
Check your settings in say an app like LTE on/off make sure she is in LTE mode or cdma/LTE
Sent from my Thunderbolt using XDA App
Grnlantern79 said:
Check your settings in say an app like LTE on/off make sure she is in LTE mode or cdma/LTE
Sent from my Thunderbolt using XDA App
Click to expand...
Click to collapse
tried to put her on LTE mode only a few time before, and she can only get 1x speed.
Unroot it, return to stock with the full RUU and see if its busted. If it is you probably have a bad radio in the phone...I had to send my first TB back a week after I got it for this reason.....
Customer service was very helpful believe it or not, just make sure you tell them you have already done a hard reset on the phone, done the OTA's and 4G still doesn't work. The will ask you your build number, etc. to make sure it matches what's "in the system".
So just return to unrooted Froyo, do any and all upgrades to get it current, if it still doesn't work you should be able to get a new phone.
wrich73 said:
Unroot it, return to stock with the full RUU and see if its busted. If it is you probably have a bad radio in the phone...I had to send my first TB back a week after I got it for this reason.....
Customer service was very helpful believe it or not, just make sure you tell them you have already done a hard reset on the phone, done the OTA's and 4G still doesn't work. The will ask you your build number, etc. to make sure it matches what's "in the system".
So just return to unrooted Froyo, do any and all upgrades to get it current, if it still doesn't work you should be able to get a new phone.
Click to expand...
Click to collapse
I'm hoping I don't have to go there, but it seems I'm not the only one with the problem, since I found some people with similar dilemma on the radio thread.
Sent from my HTC Glacier using XDA Premium App
Sim card
Another idea is that the sim card is dead.
Verizon 4G sim cards can't be reactivated once their deactivated, this happens when you try activate a 3G phone on verizon from a 4G phone, the sim will be dead in 24 hours, I'm guessing the problem may be the same here, once the SIM was disconnected in the system, it can't be reactivated.
Unfortunately to get a new sim, you'll still have to return to unrooted stock to get support from Verizon, but I expect the phone itself is just fine.
Verizon employees are still somewhat inexperienced dealing with these 4G sim cards from what I've seen in stores, so they may have failed to account for that when they reactivated the service.
That seems more likely to me than the phone just happened to break when the service was disconnected.
Did you ever try just flashing another radio? It's worth a try. I would try flashing the radios from the 1.70.605.0 build.
movielover76 said:
Another idea is that the sim card is dead.
Verizon 4G sim cards can't be reactivated once their deactivated, this happens when you try activate a 3G phone on verizon from a 4G phone, the sim will be dead in 24 hours, I'm guessing the problem may be the same here, once the SIM was disconnected in the system, it can't be reactivated.
Unfortunately to get a new sim, you'll still have to return to unrooted stock to get support from Verizon, but I expect the phone itself is just fine.
Verizon employees are still somewhat inexperienced dealing with these 4G sim cards from what I've seen in stores, so they may have failed to account for that when they reactivated the service.
That seems more likely to me than the phone just happened to break when the service was disconnected.
Click to expand...
Click to collapse
You we're exact on the mark about the sim registration. I told her to replace the sim. And sure enough it worked after it was activated. Glad I didn't I have to resort to going stock and unrooting... She probably would've beat me up...
Sent from my A500 using XDA Premium App
I was flashed to ROCKO unlocked, and decided that I want to update my sprint stuff cause I wasn't able to on any custom stock ROM, it would stay on "Contacting Network" when I would try to update. So I SBF'd to 198_7 and unlocked again, and I am still not able to update my data profile or prl, still the "Contacting Network". My phone is activate, it just can't update profile/prl.
If I recall correctly, you have to have sprint push the profile update to you. I've read that people, who do stuff like switch roms get flagged in every their system. I think it was something asking the lines of security precaution. I'm pretty sure once you call, they can get your profile updated, then you should be able to update your prl.
Sent from my MB855 using xda premium
nyckid211 said:
If I recall correctly, you have to have sprint push the profile update to you. I've read that people, who do stuff like switch roms get flagged in every their system. I think it was something asking the lines of security precaution. I'm pretty sure once you call, they can get your profile updated, then you should be able to update your prl.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
^This exactly. Give sprint a ring. If thats still a no go try letting it activate and update through the Sprint Zone activation and updater app.
Thanks guys.
Would I have to lie and tell them that I never root or unlocked the bootloader/flashed other ROMS?
I've looked everwhere in Sprint Zone, and can't find the updater.
I personally have just told them that I was doing an OTA update and it had an issue or something along those lines lol they wont question too much, or atleast never have for me
IDK, I have trouble lying when it doesn't make sense lol. Could I mention that I'm trying to develops apps and need certain permissions etc. ?
Isnt 196_6 current? Or am i wrong?
Sent from my rooted mofo running on sprints 4g network
motorolatriumph said:
Isnt 196_6 current? Or am i wrong?
Sent from my rooted mofo running on sprints 4g network
Click to expand...
Click to collapse
I believe 198_7 is the latest official one.
Plancy said:
I was flashed to ROCKO unlocked, and decided that I want to update my sprint stuff cause I wasn't able to on any custom stock ROM, it would stay on "Contacting Network" when I would try to update. So I SBF'd to 198_7 and unlocked again, and I am still not able to update my data profile or prl, still the "Contacting Network". My phone is activate, it just can't update profile/prl.
Click to expand...
Click to collapse
I just updated prl/and profile no issue do you have service maybe do it while on,wifi
Sent from my MB855 using xda premium
edward.hidalgo said:
I just updated prl/and profile no issue do you have service maybe do it while on,wifi
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
It's activated(able to make calls, 3g, etc). It's either flagged like a previous poster has mentioned, or something about PDS partition, from doing all the SBF'ing flashing different roms etc.
Plancy said:
I believe 198_7 is the latest official one.
Click to expand...
Click to collapse
Last Official was 198_6, 198_7 was leaked...
Similar Problem Updating Profile/PRL
I am unrooted and for some reason when I go into the Sprint Zone App it tells me there is a Profile and PRL update but if I choose either it gets stuck in "Contacting Network" and all I can do is reboot.
I spoke to Sprint and they made me out an "eTicket" to take to the nearest Sprint "repair" store but I am without wheels at the moment and kinda hoping someone might know whats going on.
The lady I spoke to said that these was a problem with the nearest tower to me, that it was operating at 3/4 efficiency, and that may be why I can't get my phone to update? Has anyone been told this before and is this something that could be the problem or is it just BS?
She said that most likely I would get a replacement when I could take my phone to the Sprint store.
Someone had a similer problem in another thread and a got a reply from someone asking what their H/W version number was. On my phone under H/W version it says unavailable.
Why would that happen and if I could somehow fix that might that be the ultimate fix to my issue?
Any help would be great...This is really the only problem I'm having. I really like this phone. It is a beast. Being in a 4g area is pretty awesome and being able to get constant 8-10 Mb (outside) is worth every penny. In my house during daytime hours I can only get 2-3 Mb but thats pretty damn cool.
If the camera was just a little bit better at taking low-light pics, this might be one of those "near perfect" phones in my opinion.
By the way, everyone that contributes here is awesome. I love this community and all of XDA.
Thanks
So you know im in a wireless family.
I work at T-Mobile Corporate in Redmond, And my brother in New Jersey at verizon.
I personally use an optimus G SPRINT on Verizon Prepaid, Not that I dont like the T-Mobile speed, But lets be honest coverage sucks.
So the 1.5 to 2.5 MBPS nationwide I get on verizon is better. OK Back on point.
So my brother tells me Verizon is actively trying to combat the MIFI flashed to verizon prepaid, On mulitple fronts.
They have contacted ebay, and ebay sellers have been suspended.
And here is the one that sucks for all of us that use verizon prepaid.... They renew and send a new AAA Key every 4 to 7 days.....
And may also resend or renew the A-Key.
What that means for you if you are a verizon prepaid user and have a flashed phone but not the donor...... You sadly are screwed.
But I'm going to give you an easy fix, I have had to do it now twice.
You can also use QPST build 355 works for me, and copy all the data from the gusto to the other device.
Sadly my brother said they are not doing this targeting phone users, Verizon is not stupid they know people flash phones.
But they are targeting JETPACK and MIFI users.
He says in recent weeks they have seen Prepaid accounts that are using over 80GB of data a month on these supposed GUSTO's
So naturally verizon is now cracking down, This is similar to what Sprint and Boost Mobile did with ERROR 16.
Just giving you a heads up, And to flashers who flash the MiFi devices, Verizon is actively searching Craigslist and eBay, One eBay seller is now being sued by verizon and they found him on Craigslist in Salem, Oregon.
Just be careful, I use about 15GB a month on my Optimus and dont have any issues, Beyond having to reflash the info using the guide above once a week or so.
I also have seen less AAA resets when I keep the ROM Stock, And more resets and having to reflash when I got to a custom rom.
Hope this helps.
TechSoft said:
So you know im in a wireless family.
I work at T-Mobile Corporate in Redmond, And my brother in New Jersey at verizon.
I personally use an optimus G SPRINT on Verizon Prepaid, Not that I dont like the T-Mobile speed, But lets be honest coverage sucks.
So the 1.5 to 2.5 MBPS nationwide I get on verizon is better. OK Back on point.
So my brother tells me Verizon is actively trying to combat the MIFI flashed to verizon prepaid, On mulitple fronts.
They have contacted ebay, and ebay sellers have been suspended.
And here is the one that sucks for all of us that use verizon prepaid.... They renew and send a new AAA Key every 4 to 7 days.....
And may also resend or renew the A-Key.
What that means for you if you are a verizon prepaid user and have a flashed phone but not the donor...... You sadly are screwed.
But I'm going to give you an easy fix, I have had to do it now twice.
You can also use QPST build 355 works for me, and copy all the data from the gusto to the other device.
Sadly my brother said they are not doing this targeting phone users, Verizon is not stupid they know people flash phones.
But they are targeting JETPACK and MIFI users.
He says in recent weeks they have seen Prepaid accounts that are using over 80GB of data a month on these supposed GUSTO's
So naturally verizon is now cracking down, This is similar to what Sprint and Boost Mobile did with ERROR 16.
Just giving you a heads up, And to flashers who flash the MiFi devices, Verizon is actively searching Craigslist and eBay, One eBay seller is now being sued by verizon and they found him on Craigslist in Salem, Oregon.
Just be careful, I use about 15GB a month on my Optimus and dont have any issues, Beyond having to reflash the info using the guide above once a week or so.
I also have seen less AAA resets when I keep the ROM Stock, And more resets and having to reflash when I got to a custom rom.
Hope this helps.
Click to expand...
Click to collapse
Thanks for the write-up. Customers have been asking about this. So every 1-2 weeks? And nothing the customer can do without a reflash? Which phones do you use for donors?
This really only affects the mifi users. I keep a backup of my aaa and other passwords and they haven't changed in over a year. If for some reason you do have an issue dial *228 and it'll update for you on your evo 4g lte. Also I know I'm the pot calling the kettle black but mifi users use alot more data then any one else. I personally don't use them.
Asadullah said:
This really only affects the mifi users. I keep a backup of my aaa and other passwords and they haven't changed in over a year. If for some reason you do have an issue dial *228 and it'll update for you on your evo 4g lte. Also I know I'm the pot calling the kettle black but mifi users use alot more data then any one else. I personally don't use them.
Click to expand...
Click to collapse
Do I press 1 to program or 2 to update roaming capabilities?
susy1990 said:
Do I press 1 to program or 2 to update roaming capabilities?
Click to expand...
Click to collapse
1 reprograms your phone and updates the prl
2 just updates the prl
Asadullah said:
1 reprograms your phone and updates the prl
2 just updates the prl
Click to expand...
Click to collapse
OK so which one is a better choice. If I reprogram my phone will it mess up the talk and text in any way?
delete
Asadullah said:
1 reprograms your phone and updates the prl
2 just updates the prl
Click to expand...
Click to collapse
My phone is now roaming. If I take it off from automatic mode I have no service.
susy1990 said:
My phone is now roaming. If I take it off from automatic mode I have no service.
Click to expand...
Click to collapse
Your not really roaming it's the phone telling you it thinks that it's roaming due to sprints programing the phone. Turn off all roaming notifications in settings and change settings to allow all roaming. If that bothers you alot then flash the 53000 prl. But now you'll have your aaa keys good
Some Modded PRL's any1?
damastah said:
Thanks for the write-up. So every 1-2 weeks?
Click to expand...
Click to collapse
1-2 weeks where do you get that? He said every 4 to 7 days that seems to be at MAX 1 week or Did I miss something? I know the MiFi's i've reflashed last from 24hrs to 4 days max. While other's I know have had no issues for weeks after reflash
susy1990 said:
OK so which one is a better choice. If I reprogram my phone will it mess up the talk and text in any way?
Click to expand...
Click to collapse
First off Thanks for the Heads Up.
the OTA is Pretty self explanatory 1-Programs your phone & 2-Updates the PRL.
There isn't a good or bad choice it's either Program your Phone or if your phone is already programmed & you want to get the latest PRL you press 2(If you have a Verizon Android Flashed you won't get the roam triangle,The triangle is only if you have a non vzw android flashed over) but If any1 is worried about the roaming triangle or it just bothers you I have attached links to 4 different Modded PRL's that should remove the Triangle.
51807 PRL - The 51807 is an older Prl but Good. I know it works on alot of different Phones cause I have Flashed many many phones using this PRL all across the country
59317 PRL - The 59317 PRL is a newer PRL & I have used it but not on as much & not as many Phones as the 51807 just because it's newer. It is a good PRL as well but ymmv where you are with coverage so that's why I uploaded 4 diff PRL's
52979 PRL - I Have NOT USED this PRL
52515 PRL - I Have NOT USED this PRL
I use the 51807 & the 59317 PRL's when flashing phones to Straight Talk, Verizon PP, Page Plus & Next G. You can use these for ANY Carrier that uses Verizon's Network & they SHOULD work. I Hope they help some peps.
I am NOT Responsible for you, your phone, your actions or how you load these to your phone. So if you brick your Phone it is NOT my fault. Use QPST 2.7-366, CDMA WorkShop(use the Paid Version don't b cheap) or DFS to Load these. If you do a Google search you will find all of these
THANK YOU TO ALL THE SOLDIERS PAST & PRESENT!!! IF IT WASN'T FOR YOU
WE WOULDN'T HAVE WHAT FREEDOM'S WE DO HAVE.
THANK YOU & YOUR FAMILIES=Hand Shake​
Hi guys my question to yall is how do yall get the *228 to go through everytime I try it it doesnt give me a keypad to select 1 or 2 and than I tryi to dial *22890 and *22891 and nothing it gives me an error message if anybody help I would greatly appreciate it thanks.
*228 will NOT work on a flashed sprint device it will never get data on its own you need to use a doner for that sorry. but to answer your question just dial *228 and leave it alone for like 3-4 minutes it will ota but wont get data
I am seriously new at this so please bear with me. What does one do if they do not have QPST (can't activate/register). I have been trying for 4 months to get my ota data to work. My wifi is fine while at home but when I leave I have no data connection. I can make calls and my gps works. But I have tried everything ##7764726 *#*#4636#*#* get me into settings but I do not know what should or should not be in there.
PLEASE HELP ME,
Beth
7-24-14 Mifis Flashed to Verizon since the 6-10-14 Update
Hello,
Just want to let you all know that we do have the original and so far only confirmed solution for flashing mifis to Verizon at this time. We have the 2200 the LC11 and the 801 and 802 working and are now almost done with the 4510 and then we will be working on the 4620 after that
We also have the solution to fix throttled mifis and prevent Verizon from throttling them again. In fact Verizon can never communicate with the device after the throttling fix is applied. We have this working on the 2200 and will be porting it out to all other mifis.
Once we get all the mifis working again on Verizon we will be working on porting the throttling solutions over to phones
I know I don't post alot on XDA but I wanted to share this information with the whole flashing community rather then just keeping it over at CDMA Gurus where I usually post
You can check out our videos and services via our websites
www.flashedphones.net
www.flashedmifis.net
Also here are our dev links
Hope this helps
thanks
elisa191
De-Throttle Mifis
http://cdmagurus.com/thread22854.html
Flash Mifis to Verizon post 6-10-14
http://cdmagurus.com/thread22391.html
_______________________________________________________________________
UPDATE - 8-7-16
Just want to let everyone know that we have the 4510 solution now and the 4620 for both flashing and dethrottling these units to verizon prepaid accounts!
So thats just about all the mifis and now were about to start working on some new ZTEs