Ok...so I know there are other threads...read them all about this and Ive tried 3 times with Sprint updating and changing the MID number, PRL, Data reset but I still cant connect to roam. There suggestion was to swap the phone out but if I do that and reroot wont I be back in the same boat? What fix am I overlooking here? Thx
neopolotin75 said:
Ok...so I know there are other threads...read them all about this and Ive tried 3 times with Sprint updating and changing the MID number, PRL, Data reset but I still cant connect to roam. There suggestion was to swap the phone out but if I do that and reroot wont I be back in the same boat? What fix am I overlooking here? Thx
Click to expand...
Click to collapse
Dunno here, but I'd give it another shot. After I rooted and got a signal 16, I just stayed on the line, followed the instructions given, and was back up and operational within 2 minutes.
Note, though, that Engadget had a post saying that they were going to be pushing an update to the Evo3D in the next couple of weeks. The story also had a suggestion that it may close off the S-OFF/Root hole that the Revolutionary team found.
bit_boy said:
Dunno here, but I'd give it another shot. After I rooted and got a signal 16, I just stayed on the line, followed the instructions given, and was back up and operational within 2 minutes.
Note, though, that Engadget had a post saying that they were going to be pushing an update to the Evo3D in the next couple of weeks. The story also had a suggestion that it may close off the S-OFF/Root hole that the Revolutionary team found.
Click to expand...
Click to collapse
Well thats just sketchy on their part. lol
I was having the same problem. I was forcing Roam using Roam Control and when I did I was unable to place calls and received a Verizon Error message. Also 3G roaming data would not work. I could only receive calls while roaming. Here is what i did to fix it and I think it may be a combination... I reflashed the ROM I am using (ViperROM 1.3) and it still didn't work. So at a complete loss, I called Sprint. The sprint support rep said they have acknowledged a problem with the EVO 3D not roaming correctly. She had me make sure that the Roaming was set to Sprint Only, not automatic. and then she had me power down and pull battery. Once my phone came back up, Roaming worked!! I'm thinking she did something on her end to make it work. Also the dev for Roam Control, MrGreg said that there have been a lot of reports that Root messes up Roam Control on the 3D.
jerichey said:
I was having the same problem. I was forcing Roam using Roam Control and when I did I was unable to place calls and received a Verizon Error message. Also 3G roaming data would not work. I could only receive calls while roaming. Here is what i did to fix it and I think it may be a combination... I reflashed the ROM I am using (ViperROM 1.3) and it still didn't work. So at a complete loss, I called Sprint. The sprint support rep said they have acknowledged a problem with the EVO 3D not roaming correctly. She had me make sure that the Roaming was set to Sprint Only, not automatic. and then she had me power down and pull battery. Once my phone came back up, Roaming worked!! I'm thinking she did something on her end to make it work. Also the dev for Roam Control, MrGreg said that there have been a lot of reports that Root messes up Roam Control on the 3D.
Click to expand...
Click to collapse
Just to clarify, I wouldn't say that rooting affects Roam Control specifically, but it affects roaming altogether. This was a pretty typical problem with the original EVO as well. Sprint is usually able to fix the "unable to authenticate" problem if you give them a call.
jerichey said:
I was having the same problem. I was forcing Roam using Roam Control and when I did I was unable to place calls and received a Verizon Error message. Also 3G roaming data would not work. I could only receive calls while roaming. Here is what i did to fix it and I think it may be a combination... I reflashed the ROM I am using (ViperROM 1.3) and it still didn't work. So at a complete loss, I called Sprint. The sprint support rep said they have acknowledged a problem with the EVO 3D not roaming correctly. She had me make sure that the Roaming was set to Sprint Only, not automatic. and then she had me power down and pull battery. Once my phone came back up, Roaming worked!! I'm thinking she did something on her end to make it work. Also the dev for Roam Control, MrGreg said that there have been a lot of reports that Root messes up Roam Control on the 3D.
Click to expand...
Click to collapse
Well I couldnt get it to work on viper, Helicopter or Joelz.....Im going to try synergy since it says it cleans up some of the root method....maybe that will help. I never once got a rep saying they knew there was a roaming problem...
Ok so I got roaming to work...I asked the lady at sprint to do the profile update and HLR reset then I asked for a ESN refresh....he supervisor then got on the line asked how he could help. After he gave the spill about them not promising roaming will work all the time I told him I don't understand how an EVO sitting next to my 3D could roam perfectly fine and mine not. He said he would refresh everything on their end including ESN. I left my phone off for a few mins and now I can roam perfectly fine!
Sent from my PG86100 using XDA Premium App
Had the same problem and after multiple calls to sprint with no help, I figured I would try to reset the phone and do a hands free activation. After I did this, everything has worked fine and roaming/calls/text have been perfect.
Note you must know your MSL to do this and be on Sprints network. You can call sprint for your MSL, or if you have root/s-off you can download MSL reader from the market
https://market.android.com/details?id=com.esccode.msl&feature=search_result
1. Go to data menu by entering ##3282# on the dialpad.
2. Click on "Edit Mode".
3. Enter your MSL # and hit "OK"
4. Choose "Data Profile".
5. Press your menu button on the phone and select "Restore" from the menu that appears. Then hit "OK.
6. Phone should reboot.
7. It should start hands-free activation.
Hope this helps.
I was getting this error. I called sprint, and they said it was an outage, it should be fixed in x, days, and told me I was entitled to compensation. They gave me a $25 credit for it. It's not a whole lot, but I'll take it.
I had the same problem...I did the Sprint Chat and asked for an HLR refresh, and that fixed it!
just do a sprint chat and tell them you have a error 16 they will tell u to hold on a min then they will tell u what to do and after that it will be fixed
neopolotin75 said:
Ok so I got roaming to work...I asked the lady at sprint to do the profile update and HLR reset then I asked for a ESN refresh....he supervisor then got on the line asked how he could help. After he gave the spill about them not promising roaming will work all the time I told him I don't understand how an EVO sitting next to my 3D could roam perfectly fine and mine not. He said he would refresh everything on their end including ESN. I left my phone off for a few mins and now I can roam perfectly fine!
Sent from my PG86100 using XDA Premium App
Click to expand...
Click to collapse
Thanks I requested the HLR refresh and it worked!!!
I had the Verizon roaming authentication problem and made several calls to support with no meaningful progress (one rep told me to bring the phone to a store for an update). Then I chatted with a rep tonight and asked them to perform a CHLR refresh and reload my ESN. They had me pull the battery and the phone updated on reboot. Roaming finally works again.
I called and had a reset done and now I am stuck in 1x data hell roaming and not. Anyone else have that problem, I think I am gonna have to call back today and have them undo whatever they did.
Sent from my PG86100 using XDA Premium App
allu have to do is a chat online with sprint and tell them u have a error 16 they will do there magic and fix ur phone the error 16 fix works for kust about everything
Related
Is it just me or is anyone else unable to roam on verizon towers after the new rom/radio upgrade (3.16/3.27)? I get a recording while roaming "Welcome to Verizon Wireless, We're sorry, we're currently unable to authenticate your phone, Please try your call again. If you continue to experience problems please hang up and dial #8899 from your wireless phone"
Any help is appreciated.
Thanks
What PRL do you have?
I never tried making calls but I don't roam on their towers anymore when it comes to data. I just get the triangle and 1x and no web browsers will let me connect to any sites. I kinda just gave up on it since I only needed it in the DC Metro.
I can roam with the new rom. im using prl 60610 and data roaming works as well.
kind of ironic because it didn't work before for me
1X roaming works on Alltel and VZW with 60610 and 3.x ROM here, but EvDO roaming is a no go on Alltel, even though it works fine with 60610 and 2.x ROM.
I guess you are not the only one having the problem. it's a no for me for both prl 60610/60611.
However I am only having the problme at home. I can roam onto vzw at different locations (voice and 1x data) $%^%^&#!$#@!$
People say it may have something to do w/ a-key which is blank on my phone ...
TopGun2000 said:
I guess you are not the only one having the problem. it's a no for me for both prl 60610/60611.
However I am only having the problme at home. I can roam onto vzw at different locations (voice and 1x data) $%^%^&#!$#@!$
People say it may have something to do w/ a-key which is blank on my phone ...
Click to expand...
Click to collapse
Using PRL 60610. I downgraded my phone back to radio 1.40 and it worked fine but it will not work with the new one. I guess roaming had to be given up for GPS.
Problem Solved. Seems like Sprint's System wanted to do the PRL update themselves for record purposes because after I got the rep to shoot a new prl (60611) roaming worked. I then downgraded to 60610 (best one for me) and viola it stuck. everything is working now.
keeepinitgansta said:
Problem Solved. Seems like Sprint's System wanted to do the PRL update themselves for record purposes because after I got the rep to shoot a new prl (60611) roaming worked. I then downgraded to 60610 (best one for me) and viola it stuck. everything is working now.
Click to expand...
Click to collapse
Ok, so how did you fix this again? Can you give me the current setup of your phone or the steps you took to get to where you are?
Here is what I have done so far:
- Flashed from 2.17/1.47.1 to 3.16/3.27 and got the no Verizon roaming issue you described.
- Figured it was an issue with the new ROM, so I then downgraded back to the stock 2.17/1.47.1 ROM from the HTCAmerica website. (The downgrade wiped all my settings for MDN and MSID) However, the issue persisted.
- I updated the PRL to 60611. Still no luck.
- Called Sprint, who initiated an over the air PRL update of their own to 60611. Still no Verizon roaming. Sprint says they are "investigating" and will get back to me, whatever that means...
The only other thing I can think to do is to downgrade again back to 2.09/1.40.
Also another question, when you view ##778#, does your phone show anything on the "A-Key" page under the "Authentication Key" setting now that you have roaming working? Mine is currently blank, and I have read a couple threads talking about needing to figure it out, but those users all seemed to be Verizon customers. I would be interested to find out if Sprint customers have that setting or not.
This issue is driving me nuts, and any help is greatly appreciated.
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
aatreya said:
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
Click to expand...
Click to collapse
Wow. Genius! Got Sprint technical support on the phone and asked for the "HLR Reload." The guy knew exactly what I was talking about and was able to do it right away. I am now able make calls and get data while roaming (currently using 2.17/1.47.1).
Thanks again!
glad to know it worked
rfrankli said:
Wow. Genius! Got Sprint technical support on the phone and asked for the "HLR Reload." The guy knew exactly what I was talking about and was able to do it right away. I am now able make calls and get data while roaming (currently using 2.17/1.47.1).
Thanks again!
Click to expand...
Click to collapse
wow, now i know what i need to do w/ my 3.16 rom
edit: got a call from spint. the tech guy said that he found an authentication failure on my account and reset it. will test the roaming again when i get home. he also had no clew what the "HLR reload" is...
edit2: whatever reset sprint did at their end seems to work. voice/1x roaming is working now, still no evdo though.
Still wont work for me *sigh*
aatreya said:
Call sprint technical support and tell them you need an "HLR Reload". If they don't know what this is, ask to speak to someone who does.
Click to expand...
Click to collapse
I called and had them do this, but i had no luck. Still no EVDO roaming in places where there should be. I can make and recieve roaming call and data roam in 1X but evdo is gone. This is on both the 60610 and 60611 PRL. EVDO roaming worked on both PRL's with the 1.47 radio and 2.17 rom.
Any more ideas?
well I thought I didn't have these problems, but now I'm not certain. I don't think I've ever been able to EVDO roam on verizon, at least not sice I started paying attention which was already after moving to a 2.17 with 1.40 radio and orginal PRL. I know verzion has evdo in this area, but sprint doesn't. Maybe there is no agreement here for evdo becuase of that? I guess it couldn't hurt to try this trick and see if I get it.
I found more problems using 3.16. I did encounter the roaming authentication error. So I called, got the HLR reload. That made things MUCH worse. Now nothing works. My MSID and whatnot are all correct and I see signals, but can't make calls or data connections. Sprint tried some things but nothing worked. I'm going to do a hard reset and see what happens.
Sprint was surpisingly willing to work with me knowing that I am using the test rom though... but in the end still suggested I revert to an official rom when nothing worked out.
Anyway, not sure I'd reccomend the HLR reload on the 3.16... try at your own risk.
holy crap
sorry to hear that
if you get it figured out, lemme know what fixed it.
I suspect sprint just hit the wrong button. I hard rest... still no dice, but I noticed that dialing *2 does work.. normal numbers and network don't. Seems like an authentication issue. I doubt seriously it has anything to do with the rom, but I just flash 2.17, casue otherwise I don't hink I'll get far with sprint.
Now when I try to make it call it tells me the phone has not been activated. (with 3.16 I just got the call end dings imeediately)
SO when I fix this and flash back to 3.16, will I dare to try this again after roaming gets broken again?... tough call.
Edit... still need to fix MDN and MSID in the 2.17 .. more soon.
Edit: fixed MDN and MSID in 2.17... now having the same problem as in 3.16... ding ding ding... no call. Looks like I have to call sprint again.
ON the phone with sprint now. Have rebooted for them a couple of times. This guy is still stumped and he doesn't seem generically ignorant.
I started a new thread for my issue.
http://forum.xda-developers.com/showthread.php?p=1881522#post1881522
You might want to read it before doing any HLR updates in 3.16 though. I'm on my third rom today and a few hours with sprint tech and I still can't make calls.
(EDIT
SOLVED... see above thread. It seems they messed me up badly when they did the HRL reload... however.. it doesn't have to be done badly... at least now we know the fix if it happens to someone else.. so don't let my experience stress you too much. Now to upgrade roms again.
and voice roaming works now..
Roaming not working
ahhh!!! after the upgrade, i cannot roam on vzw...
Called and spoke to several reps... no one knows what HLR Reload is... according to them turning the phone off and taking out the battery for a few minutes will force the HLR reload....
I don't know what to do.... These reps are impossible to deal with.. Anyone have any suggestions?
Well I s-off and rooted the phone however now my phone is not working. I try to make a phone call and it says error #16 switch 237. If someone tries calling me it just goes straight to voicemail.
1) Make a call and stay on the line til sprint picks up
2) Have another cell phone/home phone to receive a call from the sprint rep that will help you.
3) They will do everything with no questions asked, voila.
dteze88 said:
1) Make a call and stay on the line til sprint picks up
2) Have another cell phone/home phone to receive a call from the sprint rep that will help you.
3) They will do everything with no questions asked, voila.
Click to expand...
Click to collapse
If you don't have another phone no need to trip, they don't require you to have a 2nd phone they just prefer it.
Reboot your phone and let the handsfree activation complete then goto menu, settings, update phone, and update the profile. Now your phone works.
cruise350 said:
Reboot your phone and let the handsfree activation complete then goto menu, settings, update phone, and update the profile. Now your phone works.
Click to expand...
Click to collapse
+1
That should do it.
cruise350 said:
Reboot your phone and let the handsfree activation complete then goto menu, settings, update phone, and update the profile. Now your phone works.
Click to expand...
Click to collapse
It doesn't.
Because you can't connect to mobile network.
Sent from my PG86100 using XDA App
Try *228 to activate.
notasimpleway said:
It doesn't.
Because you can't connect to mobile network.
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Even when I can't connect to the mobile network because of an error I can still update prl and profile.
tapa tapa tapa
just fixed mine..
*228.. wait till sprint answers.
let them push whatever they do
reboot phone.. make a call .. done.. next, update profile. now u got 3g back.. done.
I tried master resetting the phone putting in ##786#, using the msl code, nothing. I called Sprint and they couldn't solve it. I tried *228 too,that didn't help it. I'm gonna try RUU'ing the phone next to see if it will work.
Sent from my PG86100 using XDA App
Mine made it through handsfree activation without issue, and I haven't had any of these problems..... Guess I got lucky, or just beat the rush.
So after calling into sprint (my E3D had the same Error 16 problem), apparently the Error 16 is a new security feature that is triggered by some change in the way the phone connects to the network. Some software changes can cause it (as can a ##RTN# apparently).
Not surprisingly, there's a bit of a hold time tonight to get through if you get the error message (about 12 minutes here). If you've got the error, call now and sit on hold -- they close in a little over 30 minutes.
Also, unlike other Sprint troubleshooting, call from the phone with the problem -- but have another they can call back on.
After I got s off, my phone automatically activated itself......then, when I made a phone call, sprint security intercepted my call, and asked me to verify my identity.....and then told me their system didn't recognize my phone!!! They told me to power down, then up in 30 seconds... Funny thing is that I was surfing with no issues prior to the call, ur I thought I'd share that with you guys.
Sprint has officially been put in the know!!!! Can u imagine all the 3D owners having these security breaches!!!! All coincidentally???? Lmfao!!!
I wish i would have known before hand that this would 16 my phone as mines a work issued phone so i cant just call in like a normal user. Is there a known local method that works to get this reset? If so please post the steps as im sure many others will encounter this problem. The error call does not hand me off to a rep, it just hangs up.
Same Here
I also couldnt make calls or text after flashing. I called Sprint gave them the error code (from failed text msg) She asked me to remove the battery and give her the ID code and in 2 mins it worked perfectly. I did not offer up any reasons for the problem and she did not ask. Couldn't have been easier. If one agent gives you a hard time or is clueless hang up and try again.
how in barnacliville do i do it!
##72786# should work and it wont erase your data...
##786# will reset the device and your data
##3282# and you can go to data profile, menu and then restore.
you need your msl for them all - i can help with that if you dont know how
or lastly you could call sprint haha
EDIT: you can also go to Home page - Menu - Settings - system updates - And then try update profile and prl.
After I got s off, my phone automatically activated itself......then, when I made a phone call, sprint security intercepted my call, and asked me to verify my identity.....and then told me their system didn't recognize my phone!!! They told me to power down, then up in 30 seconds... Funny thing is that I was surfing with no issues prior to the call, ur I thought I'd share that with you guys.
What's *228 then?
I beleive it used to be used for hands free activation. I know it is still used to activate cricket phones but currently it does nothing for sprint phones. at least none that ive tried it on haha
igotroot said:
After I got s off, my phone automatically activated itself......then, when I made a phone call, sprint security intercepted my call, and asked me to verify my identity.....and then told me their system didn't recognize my phone!!! They told me to power down, then up in 30 seconds... Funny thing is that I was surfing with no issues prior to the call, ur I thought I'd share that with you guys.
Click to expand...
Click to collapse
After restarting did it work alright? thats pretty funny though
BDawgTrap said:
After restarting did it work alright? thats pretty funny though
Click to expand...
Click to collapse
Yes. It was all good. Check down the line in this forum area for a guy that posted a thread about his phone not working after s off. Same ****.
CAN YOU FREAKING IMAGINE HOW MANY EVO 3D phones nationwide are causing security interruptions, all coincidently?????? Sprint is like, " Those Damn XDA mother fu#$&%$!!!"
haha thats great. someone was making a comment earlier about calling htc and sprint and saying they did an ota and now they have s-off and are running android version - custom rom name- haha. it made me chuckle.
I recently called sprint via line2 on wifi about how I no longer get Verizon roaming (I make a phone call and a verizon message pops up saying can't auth code) when in northern Pennsylvania but I used to before I got s-off and flashed gbsense deck rom .2 I called sprint they blamed my phone but I flashed rooted latest update to my moms Evo shift she's having the same problem any ideas guys(and girls)?
I'm kind of confused but it sounds like you want to roam on a Verizon tower and now that you can't you cannot make any calls? As for the Sprint rep don't worry about it unless your talking to advanced tech support they really don't know what their talking about and usually just don't have the correct answer. It sounds like when you were on deck's sense rom you got better coverage maybe because the rom had an updated radio and your stock rom had an outdated radio...not sure, have you tried flashing the latest radio to your phone? Also try a data profile update followed by a PRL update on your phone when inside your home and see if that helps your signal.
http://forum.xda-developers.com/showthread.php?t=1214076
the solution is to have adv tech support reprogram your phone...
I don't want to reprogram or turn my phone in so my mom is ditching root and giving it in
Reprogramming your phone takes just a few minutes your don't have to turn your phone in
Sent from my PG86100 using XDA Premium App
Drake9897 said:
I don't want to reprogram or turn my phone in so my mom is ditching root and giving it in
Click to expand...
Click to collapse
LOL just call sprint and tell them you are getting error code 16 when you try to dial out which in turn they will re-provision your phone takes all of 2 mins.
Sorry im kinda noob at this whole thing thank you so much for not being a bunch of a holes about this cause my mom wouldn't stop bothering me about not getting service you guys were SO much help thank you ffor you're time everybody (im also new to the forums)
I had the exact same issue a couple of days after rooting. As previous poster said just call sprint and tell them your getting error 16. Re provision does the trick.
yep had the same problem after s-off....just call and ask to have your phone reset on the network.
after a battery pull you will get roaming again.
So I got a MetroPCS phone today, got home and started following this guide
http://forum.xda-developers.com/showthread.php?t=1303507&page=11
I did EVERYTHING exactly right.
PPP Conf:
RM http://i1113.photobucket.com/albums/k502/zander145/1.png
UM http://i1113.photobucket.com/albums/k502/zander145/2.png
AN http://i1113.photobucket.com/albums/k502/zander145/3.png
M.I.P http://i1113.photobucket.com/albums/k502/zander145/5.png
Profile 0 http://i1113.photobucket.com/albums/k502/zander145/4.png
Profile 1 http://i1113.photobucket.com/albums/k502/zander145/6.png
Display http://i1113.photobucket.com/albums/k502/zander145/7.png
However, after hitting write to phone, mine automatically restarts. Dunno if that was supposed to happen. When I try and make calls I get "TSL 02 the number or service code you are attempting is not available or accessible from your calling plan" and then the call is ended.
Did I do something wrong? I went into the metro PCS store and asked about putting my ESN in the database and they looked at my like I was speaking latin. So I asked about metroflash and they said they don't do that to this phone. Any ideas or help is greatly appreciated. Verizon was taking too long for the nexus galaxy and I really don't want to sign another contract...
I did flash the metro 3022.prl
zander145 said:
So I got a MetroPCS phone today, got home and started following this guide
http://forum.xda-developers.com/showthread.php?t=1303507&page=11
I did EVERYTHING exactly right.
PPP Conf:
RM http://i1113.photobucket.com/albums/k502/zander145/1.png
UM http://i1113.photobucket.com/albums/k502/zander145/2.png
AN http://i1113.photobucket.com/albums/k502/zander145/3.png
M.I.P http://i1113.photobucket.com/albums/k502/zander145/5.png
Profile 0 http://i1113.photobucket.com/albums/k502/zander145/4.png
Profile 1 http://i1113.photobucket.com/albums/k502/zander145/6.png
Display http://i1113.photobucket.com/albums/k502/zander145/7.png
However, after hitting write to phone, mine automatically restarts. Dunno if that was supposed to happen. When I try and make calls I get "TSL 02 the number or service code you are attempting is not available or accessible from your calling plan" and then the call is ended.
Did I do something wrong? I went into the metro PCS store and asked about putting my ESN in the database and they looked at my like I was speaking latin. So I asked about metroflash and they said they don't do that to this phone. Any ideas or help is greatly appreciated. Verizon was taking too long for the nexus galaxy and I really don't want to sign another contract...
I did flash the metro 3022.prl
Click to expand...
Click to collapse
profile 0 and 1 is wrong, metropcs is not used any more,,
its the whiterabbit msl.. http://www.whiterabbit.org/android/ calculate
edit...
did u add ur esn to metro or did the metroflash...
mdiaz33685 said:
profile 0 and 1 is wrong, metropcs is not used any more,,
its the whiterabbit msl.. http://www.whiterabbit.org/android/ calculate
edit...
did u add ur esn to metro or did the metroflash...
Click to expand...
Click to collapse
I did calculate the whiterabbit msl.
just whited it out for pics.
If metropcs isn't used anymore, what do I put?
And thats the thing, I went to a authorized dealer and asked for metroflash, they said they cannot do my phone. So I asked them just to add my esn to the database and I'll do the hard work. and they looked at me like they didn't know what I was talking about...
Try this and see if it helps any
http://forum.xda-developers.com/showthread.php?t=1305353
Hope it does
Locked & Loaded
""shooter on Deck""
laie1472 said:
Try this and see if it helps any
http://forum.xda-developers.com/showthread.php?t=1305353
Hope it does
Locked & Loaded
""shooter on Deck""
Click to expand...
Click to collapse
Unfortunately no, I see it does replace a framework, but that isn't even part of thr problem I am having. When I asked about metroflash at the authorized dealer they didn't really have a clue was I was talking about. But I'm going to the corporate store today to get the metroflash done. Should still work right?
Sent from my PG86100 using xda premium
Just got back from 7 metro PCS stores including a corperate one, appears they refuse to add my ESN into the system, or even add a line for this phone. They will NOT metroflash it.
And apparently "All these kids are learning to unlock their phones and they want to add them to our network"
I have the $50/m plan that is required for smart phones. I searched metro pcs esn on craigslist nothing came back. I now have NO idea how to get this phone to work...
EDIT: I just tried doing *611 on my 3vo after "flashing" it to metropcs and it takes me to sprint's customer service. does that mean I did it wrong?
Just go to a dealer store. Most corporate stores stores dont wanna do smartphones(some will). But if you go to a dealer store they will houdini your phone. Which is where they write an esn from a phone in their inventory to your phone to get it into the network.When they flash it it will do the prl part for you. And if you already have the data provisioned everything will work from the time they flash it.
Reflasing on Sprint Data not working
Sorry not to hijack the thread but I think someone here might have the expertise to help me with the issue. I have a evo 3d that was flashed to Metro. I wanted to flash it back to Sprint, I cleaned the esn. Voice and txt works but data does not. I keep getting error code 67. upon more research i found out that i needed to copy NAI and AAA and HA secrets. Which I made sure were correct. However, I still keep getting error 67. Can anyone help me on how to get 3g data working? thanks in advance.
So are you trying to set up for metro or sprint?
Shot from my shooter e3dvo
mteezey said:
So are you trying to set up for metro or sprint?
Shot from my shooter e3dvo
Click to expand...
Click to collapse
trying to set up on sprint...
after fixing the clean esn and meid, my voice and sms worked fine...
data not working not even 1x. copied over the profile 0 and profile 1, including AAA and HA secrets but still does not work. When i tried hands free activation, i keep getting error 67 and profiles are wiped out.
Yea that error is because your not connecting to data. I know sprint you can zero out the ha and AAA. Where you used to have your metro msl code that needs to be replaced with your meid hex. Your gonna also need to make sure your sid/nid are those for Sprint. I do now know those off hand. One thing you can try to get those settings back is flashing a new radio it will contain the nv items you need for those spots.
Shot from my shooter e3dvo
mteezey said:
Yea that error is because your not connecting to data. I know sprint you can zero out the ha and AAA. Where you used to have your metro msl code that needs to be replaced with your meid hex. Your gonna also need to make sure your sid/nid are those for Sprint. I do now know those off hand. One thing you can try to get those settings back is flashing a new radio it will contain the nv items you need for those spots.
Shot from my shooter e3dvo
Click to expand...
Click to collapse
That's what I thought I did, The in Evo 3d, using QXDM, i set addresses 465, 466, 1192, 1194. one of the user id was my [email protected] and another one was [email protected]
AAA was 'secret' and HA secret, i copied over from the old working phone.
Just to try I also did, ##SPC# (SPC= my spc code) and reset my data, after it rebooted the phone it tried doing hands free activation but it would error out again...
i feel like i am so close yet little further from working outcome..
Yea I'm not familiar enough with sprint settings try asking some of the people in the boost flashing threads they will know all the sprint settings. You have a sprint prl right? Not one of the hybrid ones to roam with vzw
Shot from my shooter e3dvo
mteezey said:
Yea I'm not familiar enough with sprint settings try asking some of the people in the boost flashing threads they will know all the sprint settings. You have a sprint prl right? Not one of the hybrid ones to roam with vzw
Shot from my shooter e3dvo
Click to expand...
Click to collapse
Yeah I have the Sprint prl 21081 and PRI 1.24_003
It is not the latest PRL, but should it even matter which version i have? i thought PRL was only for roaming settings?
That will make all the difference when it cones to calling customer service if you have a metro prl it will call metro Ect. Ect. But sounds like you got that. There's threads on flashing back to sprint do an advanced search here and if its not here its on android forums it might be for EVO 4g but settings are the same on 3d
Sent from my PG86100 using XDA App
Only 1 metro store within 20 miles will flash my phone.
And they charge $63! I could just buy houdini master key for 50!
They also said that they have never successfully flashed a EVO 4G...
Can some1 sorta explainthe process of flashing to metro i had my Evo flashed by a guy that im sure knows what he is doing and everything went smooth. Now my sis and bro both got themselves Evos but this dude keeps on givin the run around and switching up the prices one phone was already being used w. Metro when bought but he insists that it needs to be "reflashed" (since its been on metro b4 wouldnt he just have to activate it to the existing acct?) the other has never been flashed. what im mostly wondering is, besides adding the esn into metro network is there anything else that MUST be done by a metro dealer? Is this thread for actual flashing or for provisioning like bloody's guide?
Sent from my PC36100 using XDA App
You won't find any guides that truly show how to flash. Technically all the guides here do show you how to flash them. But metro is using a differnt method to flash now. So its not as simple as giving them your esn to have it added. They write an esn from a metro branded phone to yours. As far as the one that was flashed already all you need to do is call metro from it. Then provision the data from bloody or jds guide in order to get web and mms.
Sent from my PG86100 using XDA App
i nevered seen this little guide right here... haha....
what happens is this,
msid 9412333323 or 9412340237 or 7272271341
u can use this number i think, any metro msid number near u. i had these saved, from my new evo, and old touchpro,
u have to use a metro number for it to connect or something...
I did both of the following steps..
I did bloodys provision and at the same time i looked for the msid num.
in qpst u need to go through all the pages, i think i found the old number in 2 or 3 spots... if its a number change..
in DFS...
MIN A = USE ur 10 digit phone number,
MIN D = USE the msid number,
add any metropcs prl and u should connect to metro before any flash, change ur number or whatever...
i manually flash my 2 evos, but the 1st metroflash to add the esn, the internet and mms worked out the door,
The second in ebay 45 to add the esn, then I dialed *228 and it worked..worked on the first shot,,, after it was added.. it was activated with my acct.. yeah..
edit: 12-23
##3282# under ADVANCED u will see MSID