I am very new to rooting and flashing and just finished rooting my phone and flashing clockwork on my phone through odin. Now I don't have an operating system on the phone and if I try to click and drag the ROM onto my SD card it says not enough room. Can I just load my ROM into odin under PDA and click go? or how do I go about getting an OS back on the phone? Do I need to do anything with the PIT in odin? Thanks
Also when I click apply sdcard:update.zip I get a message saying E:can't mount /dev/block/vold179:9
(no such file or directory)
E:can't mount SDCARD:udate.zip
Installation aborted.
You need to make room on SD card, also what is your goal? To get miui, cm7, custom Tom?
Sent from my SCH-I500 using XDA Premium App
I was trying to flash this ROM
http://forum.xda-developers.com/showthread.php?t=1195355
I should have enough room on the sd card, but it looks like it won't mount it.
fult_s said:
I am very new to rooting and flashing and just finished rooting my phone and flashing clockwork on my phone through odin. Now I don't have an operating system on the phone and if I try to click and drag the ROM onto my SD card it says not enough room. Can I just load my ROM into odin under PDA and click go? or how do I go about getting an OS back on the phone? Do I need to do anything with the PIT in odin? Thanks
Also when I click apply sdcard:update.zip I get a message saying E:can't mount /dev/block/vold179:9
(no such file or directory)
E:can't mount SDCARD:udate.zip
Installation aborted.
Click to expand...
Click to collapse
You must 3 finger boot into recovery immediately after pushing recovery with odin, and when you are in recovery for the first time you must flash a non stock kernel then and there so that recovery doesn't get overwritten back to stock when you boot up.
Also you should be selecting install zip from sd, and then navigating to said rom and selecting install do not use update.zip.
finally what recovery are you trying to use to flash vgb? I would use otb 3x.x.x, times infinity's 3.x.x.x, or 3-30fix all, those seem to be the best recovery for flashing...just my.02
Edit if you still can't get anything to load you may need to odin back to stock first to get everything straightened back out....if you can't get your phone to boot anything I'd odin eb01 in pda and atlas 2.2pit with repartition checked (you do these both at the same time)....it may be over kill but will get your phone back to stock, and from there you shouldn't have any problems with dev blocks or install problems as long as you follow my suggestions above.
Sent from my SCH-I500 using XDA App
I would just follow the instructions found here. It's very descriptive and contains all the links to the files you'll need. You shouldn't have any problems.
http://forum.xda-developers.com/showthread.php?t=1212239
Also, please note that JT is no longer updating his posts here and has switched to RootzWiki.. the latest Vanilla GB is V6.. you can find it here..
http://rootzwiki.com/showthread.php?t=2232
I'm on Vanilla GB V6 myself and it's pretty good. Hope you enjoy it too...
Related
first of all I'm really stupid when it comes to flashing this roms.... and even though i know that i flashed a rom i think the name of the rom was r3, which was suppose to be the software for the FFC of the vibrant. i fu.. up really bad and now my phone is stuck in the GALAXY S gt 19000.... knowing tht i might not be able to install the flash correctly i did a nandroid backup... but when i go into system recovery(pressing the up and down button and the power) i only get 4 options the reboot system, reinstall packages, delete all user data, and delete cache data.... but i dont know how to get into the nandroid recovery....
What your doing is entering stock recovery. You need to enter clockwork recovery (nandroid is a feature of clock work). You can enter clockwork recovery through stock by selecting "reinstall packages." This should bring you into another recovery with more options. Select nandroid/back up and restore. I believe the option is not named nandroid in the new update in clockwork recovery in order to avoid confusion....
Sent from Planet Rabbit using my intergalactic transmission communicator
every time i do thst it says E:can't open/sdcard/update.zip no such file.. installation aborted
ahhh and my volume button are al messed up the up button is down now and the down button is up now... did i just broke my phone???
It looks like you installed Eugenes newest froyo which wipes everything on your internal memory so that means your CW update zip file and your nandroid backup was deleted as well.
Same happen to me So I just started all over again flashing back to stock with odin and going with Bionix fusion, it also have FFC support as well.
P.S.your phone is not broken, you just need to decide where you want to go from here,
im trying to do that my problem is that i have a mac and i cant really find a video or a guide that shows me how to flash odin using a mac..... do u happen to know how to???
wow, dont know how to do that.
Do you have adb set up? If so you can use android commander to transfer the CW udate zip to your internal sd card. I can upload to for you if you need. Once you have that you can The 2.1 Vibrant kernel then flash any rom of your choice.
Or find a freind that had a pc and use odin from there.
Did you give the phone enough time to boot up? Give it at least 10min.
yes i downloaded the adb. i have my phone in download mode. i dont know where to get the android command...
sorry dude, just read its for windows only. Hmm!
ronnyzilker said:
every time i do thst it says E:can't open/sdcard/update.zip no such file.. installation aborted
Click to expand...
Click to collapse
I get the same message after backing up the ROM in CW. I do however see a recovery-update.zip file inside Clockworkmod folder on SDCard.
How come the update.zip file is not placed on the root after the ROM backup is complete? What am I doing wrong?
UPDATE:
I renamed the file to update.zip and placed it on the root. Tested and worked!
I got my replacement phone (lucky me) after first one got a cracked screen.
I was at JI6 stock and wanted to get Simply Honey 3.5 REVO.
So first I flashed the 3.3 update coming from froyo as was in the instructions and I got stuck at boot look with rainbow. My only choice was to odin back to stock, and here is where I am stuck....
I tried JI6 with or without re-partion and get the following error
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
I also tried Eugene's JK2 that doesn't brick and got a similar error, but there was an option to reformat SD Card, but I can't select it, since in 3e recovery power button won't work...
Please someone help me...
+1 to this. I'm having the same problem.
did you do all of this?
- Install Instructions v3.3
1. Place Simply3.3Update1.zip on your internal sdcard
2. Boot into clockwork recovery
3. Perform a factory reset.
4. Select the zip file and flash.
5. Once it is finished rebooting, wait 15 minutes before doing ANYTHING!
6. NOW REBOOT AGAIN!!!
- Works to come from any Rom. Wipe, wipe, wipe first.
- YES IS SAFE TO COME RIGHT FROM RC2!!!!!!
Install Instructions v3.5 Revolution
1. You must first be running a Gingerbread rom (Doesn't matter Lindroid, Rainbows, your cousins top secret GB rom.) If you are not then please follow instructions above to flash 3.3 first and then proceed below.
2. Place Simply_Honey_3.5_Revo.zip on your SD card
3. Use rom manager. Click Flash Clockwork Mod Recovery and select I9000
4. Flash rom in Rom Manager.
I HAVE TESTED THIS NUMEROUS TIMES AND I KNOW WHAT WORKS AND WHAT DOES NOT. IF YOU SKIP A STEP YOU WILL DEFINITELY RUN INTO PROBLEMS SUCH AS BOOT LOOPS OR APPS NOT INSTALLING
flipnotiq said:
did you do all of this?
- Install Instructions v3.3
1. Place Simply3.3Update1.zip on your internal sdcard
2. Boot into clockwork recovery
3. Perform a factory reset.
4. Select the zip file and flash.
5. Once it is finished rebooting, wait 15 minutes before doing ANYTHING!
6. NOW REBOOT AGAIN!!!
- Works to come from any Rom. Wipe, wipe, wipe first.
- YES IS SAFE TO COME RIGHT FROM RC2!!!!!!
Install Instructions v3.5 Revolution
1. You must first be running a Gingerbread rom (Doesn't matter Lindroid, Rainbows, your cousins top secret GB rom.) If you are not then please follow instructions above to flash 3.3 first and then proceed below.
2. Place Simply_Honey_3.5_Revo.zip on your SD card
3. Use rom manager. Click Flash Clockwork Mod Recovery and select I9000
4. Flash rom in Rom Manager.
I HAVE TESTED THIS NUMEROUS TIMES AND I KNOW WHAT WORKS AND WHAT DOES NOT. IF YOU SKIP A STEP YOU WILL DEFINITELY RUN INTO PROBLEMS SUCH AS BOOT LOOPS OR APPS NOT INSTALLING
Click to expand...
Click to collapse
This is great info!!!
However, the problem that I'm (we're) having is that we're stuck in stock recovery and getting this error:
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
I can't boot into the OS. Is there a way to get the clockwork recovery flashed without access to Rom Manager?
I've odin'd a few times and I'm still getting the same error.
:-(
Thanks SO much for your help!!!
chef_w said:
This is great info!!!
However, the problem that I'm (we're) having is that we're stuck in stock recovery and getting this error:
E:Can't mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.
I can't boot into the OS. Is there a way to get the clockwork recovery flashed without access to Rom Manager?
I've odin'd a few times and I'm still getting the same error.
:-(
Thanks SO much for your help!!!
Click to expand...
Click to collapse
Flash supercurios stock voodoo kernel via Odin that should take care of the devblock message and you be able to flash what you want.
Sent from my GT-I9000 using XDA Premium App
explodingboy70 said:
Flash supercurios stock voodoo kernel via Odin that should take care of the devblock message and you be able to flash what you want.
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
GENIUS!!!!!
I will try it!!!
You guys rock. Thanks for the help!
Ok.
Flashed the stock+voodoo.
I have clockwork now, but I still can't boot past recovery.
I'm trying to perform a full data/reset, but I am still getting the following errors.
e:Can't mount /dev/block/stl10
(file exists)
Error mounting /datadata/!
Skipping format
Should I try to repartition the SD card through clockwork?
What are the standard partition sizes?
Thanks.
EDIT: I have flashed a ROM, and while it flashes fine, I am still booting to recovery every time. Getting this error even after flashing a ROM successfully.
DOUBLE EDIT: Finally got a 100% successful Odin flash. Re-partition and to stock JFD. Looks like I might be back in business. Thanks everyone!!!
pretty sure you need to odin JFD , which is original stock rom. JI6 won't work and the only way I could ever odin JI6 was to do it without a pit file...but yea, you need to odin JFD..
jmcghee1973 said:
pretty sure you need to odin JFD , which is original stock rom. JI6 won't work and the only way I could ever odin JI6 was to do it without a pit file...but yea, you need to odin JFD..
Click to expand...
Click to collapse
Thanks! I probably crashed with Odin 50-60 times before I got a solid flash.
Ridiculously nerve-racking.
Hi,
I was just wondering if anyone can help me find out how to install Glitch kernel http://forum.xda-developers.com/showthread.php?t=1171948
and Miui rom http://forum.xda-developers.com/showthread.php?t=1150045
i downloaded both zips and put it on sd card, but i dont know what to do now
im on STOCK ED05 atm, but have root atm
i searched forums already but still have trouble and i found out u have to use mdt clockwordmod recovery. Can someone link me the exact file and tell me how to go from there?
i usually use odin3 1.3 to flash roms and kernels with md5.tars
sorry for my noobness
EDIT: i read HOW TO go to stock, OR from stock, and then flash any ROM. but got stuck on 3. Download latest clockwork recovery (cwr) to computer (search dev forum for correct cwr for your intended rom)
can someone send me correct cwm link plz
germanian said:
Hi,
I was just wondering if anyone can help me find out how to install Glitch kernel http://forum.xda-developers.com/showthread.php?t=1171948
and Miui rom http://forum.xda-developers.com/showthread.php?t=1150045
i downloaded both zips and put it on sd card, but i dont know what to do now
im on STOCK ED05 atm, but have root atm
i searched forums already but still have trouble and i found out u have to use mdt clockwordmod recovery. Can someone link me the exact file and tell me how to go from there?
i usually use odin3 1.3 to flash roms and kernels with md5.tars
sorry for my noobness
EDIT: i read HOW TO go to stock, OR from stock, and then flash any ROM. but got stuck on 3. Download latest clockwork recovery (cwr) to computer (search dev forum for correct cwr for your intended rom)
can someone send me correct cwm link plz
Click to expand...
Click to collapse
http://forum.xda-developers.com/attachment.php?attachmentid=657960&d=1310959789 flash that recovery with odin
thx for reply i tried that earlier and on bootup it went into blue and i couldnt mount any of the partitions
how do i flash in odin with atlas 2.2 pit file or without?
I use the recovery JT attached in this post. Should be the same one linked to about.
Shouldn't need to mount anything.
Boot into recovery using three finger method (only do this for the first time into recovery ).
Install zip from SD card
Choose zip from SD card
install the MIUI 7-29 file from post you linked to.
After its complete you can flash the Glitch kernel too, without even rebooting.
That's how I've always done it, just had to do this over ED05 after messing my phone up after flashing CM7 and Vanilia to try them out.
germanian said:
how do i flash in odin with atlas 2.2 pit file or without?
Click to expand...
Click to collapse
I always select the PIT file, and make sure the box that says "Repartition" is checked on the left side.
You only need the Atlas PIT file if you are trying to go back to a Froyo rom after flashing one of the GB roms. Say going from MIUI back to ED05.
OhioYJ said:
I use the recovery JT attached in this post. Should be the same one linked to about.
Shouldn't need to mount anything.
Boot into recovery using three finger method (only do this for the first time into recovery ).
Install zip from SD card
Choose zip from SD card
install the MIUI 7-29 file from post you linked to.
After its complete you can flash the Glitch kernel too, without even rebooting.
That's how I've always done it, just had to do this over ED05 after messing my phone up after flashing CM7 and Vanilia to try them out.
Click to expand...
Click to collapse
when i try to do the install zip from SD card it installs MIUI but then it restarts automatically and says SD CARD MOUNT FAILED waitin for SD Card it counts down from 20 to 0 and restarts and does it over and over and over again till i pull battery
My phone crashed this morning after running the daily OMFGB from the 31st for a few days. I tried to restart, it won't go past the Glitch Kernel screen. When I go into recovery, I am greeted with this message:
ClockwordMod Recovery v4.0.1.0
E: can't mount /cache/recovery/command
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
wiping data, did not help. reflashing the rom and kernel did not help. I still can't start the phone. What are the steps I need to take to fix this as I am currently not able to use my phone at all.
alemondemon said:
My phone crashed this morning after running the daily OMFGB from the 31st for a few days. I tried to restart, it won't go past the Glitch Kernel screen. When I go into recovery, I am greeted with this message:
ClockwordMod Recovery v4.0.1.0
E: can't mount /cache/recovery/command
E: can't mount /cache/recovery/log
E: can't open /cache/recovery/log
E: can't mount /cache/recovery/last_log
E: can't open /cache/recovery/last_log
wiping data, did not help. reflashing the rom and kernel did not help. I still can't start the phone. What are the steps I need to take to fix this as I am currently not able to use my phone at all.
Click to expand...
Click to collapse
Same thing happened to me yesterday..the only way I got my phone working again was to odin eb01 with the atlas 2.2..reboot fully...I then tried to go back to cm7 and got the same message and the only way I was about to fix it was to flash the com rom 2.0 obviously wipe everything before..let that boot and tried to flash cm7 with the recovery from com rom....still same message...i had to odin otb3.x.x.recovery... Download times infinity's recovery zip and flash that in otb recovery, then reboot recovery so I had ti's purple recovery...wipe everything and flash cm7...and success! I used the 7/17 build cause I didn't want nightly then rebooted from power button menu and flashed glitch and gapps.
Sent from my SCH-I500 using XDA App
Oh my goodness, sounds like something is really busted. Do you think it is OMFGB related? Yikes.
I have same thing, but I cant get the phone to show in download mode to odin anything
Same here. I'm now stuck in a boot loop. I can't even restore a backup.
Edit: Just tried to do a restore and the MD5 Sums don't match. I've had to do Odin reset three times today.
I think I might do Vodoo and try to restore that way. I will report back.
alemondemon said:
Oh my goodness, sounds like something is really busted. Do you think it is OMFGB related? Yikes.
Click to expand...
Click to collapse
No I don't think its omfgb related cause I've never ran that rom but I do think it has something to do with all the different recoveries we have floating around and so many different builds with different formats things are bound to get screwed up...my problem came from forgetting to wipe before flashing a different kernel and got me stuck in a boot loop.
Sent from my SCH-I500 using XDA App
I've had this problem ever since I got my Fascinate and tried to get CM7 on it. (2 days ago) I was always able to flash new builds just fine if I managed to get into the orange recovery and not the CM7 one. I believe the one I used was the one on ROM Manager.
This is kinda upsetting...
Hyphnx said:
Same here. I'm now stuck in a boot loop. I can't even restore a backup.
Click to expand...
Click to collapse
Its not the quickest but it should get you back...odin eb01 with the atlas 2.2pit...and reboot. Then odin recovery boot immediately to recovery via 3 finger salute...wipe everything and flash the rom you want...I've had good luck with cwm 3-30 fix all or otb 3x.x.x....if you want to go to cm7 odin the fixed recovery in jt's post and flash cm7 from that recovery....the sticky in the dev section...going from cm7/miui/gb to any other rom should give you some good info and instructions
Sent from my SCH-I500 using XDA App
efan450 said:
Its not the quickest but it should get you back...odin eb01 with the atlas 2.2pit...and reboot. Then odin recovery boot immediately to recovery via 3 finger salute...wipe everything and flash the rom you want...I've had good luck with cwm 3-30 fix all or otb 3x.x.x....if you want to go to cm7 odin the fixed recovery in jt's post and flash cm7 from that recovery....the sticky in the dev section...going from cm7/miui/gb to any other rom should give you some good info and instructions
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
We are having problems with the recovery he posted in his post.
Tried CWM-Recovery-All, turned my phone into muffed up phone. UGH!
Sorry for the double post. I've had to Odin 2 more times which makes it a total of 5 today. I used all the recoveries that are available. One at a time and they all end in the same way.
Hyphnx said:
Sorry for the double post. I've had to Odin 2 more times which makes it a total of 5 today. I used all the recoveries that are available. One at a time and they all end in the same way.
Click to expand...
Click to collapse
So what rom are you running now?
Sent from my SCH-I500 using XDA App
efan450 said:
Same thing happened to me yesterday..the only way I got my phone working again was to odin eb01 with the atlas 2.2..reboot fully...I then tried to go back to cm7 and got the same message and the only way I was about to fix it was to flash the com rom 2.0 obviously wipe everything before..let that boot and tried to flash cm7 with the recovery from com rom....still same message...i had to odin otb3.x.x.recovery... Download times infinity's recovery zip and flash that in otb recovery, then reboot recovery so I had ti's purple recovery...wipe everything and flash cm7...and success! I used the 7/17 build cause I didn't want nightly then rebooted from power button menu and flashed glitch and gapps.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
".i had to odin otb3.x.x.recovery... Download times infinity's recovery zip and flash that in otb recovery"
can you link to that? Is it the voodoo one form here:
http://forum.xda-developers.com/showthread.php?t=1046905
and which is the recovery zip that u flashed from otb recovery? can you link to them, i don't wanna screw this up any more than i already have.
alemondemon said:
".i had to odin otb3.x.x.recovery... Download times infinity's recovery zip and flash that in otb recovery"
can you link to that? Is it the voodoo one form here:
http://forum.xda-developers.com/showthread.php?t=1046905
and which is the recovery zip that u flashed from otb recovery? can you link to them, i don't wanna screw this up any more than i already have.
Click to expand...
Click to collapse
Yup...boot into the otb 3x.x.x recovery and flash the times infinity.zip and then select reboot recovery while in cwm and it should go from the otb one to the times infinity one...at that point wipe everything and flash cm7 build 7/17..not the nightly....once your on the mtd build you can flash the nightly if you wanted
From the power button menu
Sent from my SCH-I500 using XDA App
Edit: I suppose you could just odin times infinity's recovery...I just happened to have the zip on my sd handy so thats why I did it that way...it was that recovery that worked so you could odin it if you wanted it's in the link you posted try flashing it from ti's recovery..I just got there a little differently
Any suggestions if you cant get odin to recognize the phone? Ive tried three Win7 machines both x86 and x64 and three different cables...ALL of them say unknown device. Ive tried pointing to both the Sammy drivers and the nexus ones with no luck.
My phone was revived by simply doing the atlas odin method. I then flashed a fully rooted image...and from there on it's child's play. With that said, I can't get into download mode now, to odin things. What could be causing that? Not, very urgent, because at the moment the phone is running like it should
Thanks so much!
OK so I copied infinity times cwm red to phone and applied that. I still got message about cache. I ran the cwm4 from recovery and now Im back to square one again. I can try to install a ROM, but it boot loops everytime. Can my phone be revived w/o odin? Do I need an updated update.zip file?
humblewarfare said:
OK so I copied infinity times cwm red to phone and applied that. I still got message about cache. I ran the cwm4 from recovery and now Im back to square one again. I can try to install a ROM, but it boot loops everytime. Can my phone be revived w/o odin? Do I need an updated update.zip file?
Click to expand...
Click to collapse
unfortunately a boot loop normally requires odin...use the eb01 tar and the atlas 2.2pit and your phone will be back up and running
From there I would flash com rom and reboot then if you wanna take a stab at cm7...try and flash it with the com rom recovery...if it doesn't work you can just try odin'ing different recoveries as long as you don't let the phone boot fully you can simply pull the battery and try to odin a different recovery.try the one from com rom, the 3-30 fix all, ti's recovery, or jt's fixed recovery...I don't know where I got the file but I also have a recovery named fixed 3 x.x for cm7 but I came remember where I got it.it is important that you let eb01 sit for a few minutes after booting and also let com rom sit for a few minutes after flashing also...I just skipped all the setup stuff to get the main screen and then pulled the battery and started flashing
Sent from my SCH-I500 using XDA App
humblewarfare said:
Any suggestions if you cant get odin to recognize the phone? Ive tried three Win7 machines both x86 and x64 and three different cables...ALL of them say unknown device. Ive tried pointing to both the Sammy drivers and the nexus ones with no luck.
Click to expand...
Click to collapse
I'm running vista home edition...if it matters and I'm using odin v.1.7 try the samsung generic drivers also.but once I'm on cm7 my pc says it doesn't recognize my phone but if I put it in download mode and hook up odin recognizes it...so I'm not sure on that one
Sent from my SCH-I500 using XDA App
alemondemon said:
My phone was revived by simply doing the atlas odin method. I then flashed a fully rooted image...and from there on it's child's play. With that said, I can't get into download mode now, to odin things. What could be causing that? Not, very urgent, because at the moment the phone is running like it should
Thanks so much!
Click to expand...
Click to collapse
Try holding the down button while you plug into your wall charger then just move it to your pc...if that doesn't work...clean the contacts with rubbing alcohol...with the phone off.at worse case there is a jig you can manually force download mode...you can buy or make them
Sent from my SCH-I500 using XDA App
Hope someone can help me with this.
I totally formatted my phone including the internal sd card because I wanted to start fresh.
Now, when I flash a rom I get the yingyang logo blinking and nothing happens.
I downloaded an official firmware and flashed it in odin, and that worked.
So I decided to flash the custom rom I've used for a long time, but the minute i reboot the phone after flashing, the same thing happens.
And now, when I try to reflash the stock rom, i get a MD5 error in odin. Even though its the same firmware that worked earlier.
My phone is useless now, and I cant seem to get it up an running.
Anyone got an idea how to fix this?
EDIT:
Tried to reflash the custom rom with stock kernel and when the i9300 logo appears it hangs for a little while, then I'm back into CWM with the following message:
E: Can't open /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't open /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
mogendroid said:
Hope someone can help me with this.
I totally formatted my phone including the internal sd card because I wanted to start fresh.
Now, when I flash a rom I get the yingyang logo blinking and nothing happens.
I downloaded an official firmware and flashed it in odin, and that worked.
So I decided to flash the custom rom I've used for a long time, but the minute i reboot the phone after flashing, the same thing happens.
And now, when I try to reflash the stock rom, i get a MD5 error in odin. Even though its the same firmware that worked earlier.
My phone is useless now, and I cant seem to get it up an running.
Anyone got an idea how to fix this?
Click to expand...
Click to collapse
Here :
Download a good copy of the stock rom from sammobile.com
Flash it in Odin
Go to recovery and wipe data+cache
Start your rom
Flash CF-Root or however you want to re-root + CWM
Flash your custom rom
Wipe in recovery
Should do the trick + fix the log error.
xSpeced said:
Here :
Download a good copy of the stock rom from sammobile.com
Flash it in Odin
Go to recovery and wipe data+cache
Start your rom
Flash CF-Root or however you want to re-root + CWM
Flash your custom rom
Wipe in recovery
Should do the trick + fix the log error.
Click to expand...
Click to collapse
Thanks for the quick reply
But the problem is that I cannot flash the stock rom in odin because of a md5 error, which is weird since its the same file I used earlier today.
Luckily I had another ROM on my ext sd. tried to flash that now and that worked, so must have been something wrong with the other rom.
But what to about the stock rom issue?
MAybe try to download another stock rom?
mogendroid said:
Thanks for the quick reply
But the problem is that I cannot flash the stock rom in odin because of a md5 error, which is weird since its the same file I used earlier today.
Luckily I had another ROM on my ext sd. tried to flash that now and that worked, so must have been something wrong with the other rom.
But what to about the stock rom issue?
MAybe try to download another stock rom?
Click to expand...
Click to collapse
The file was corrupted/changed in some way so the MD5 doesn't match anymore.
MD5 sums are often used to compare files to see whether it's the same exact file. If that happens just redownload it, bigger downloads = higher chance of corrupting. I recommend SamMobile for all Samsung related stock FW.
P.S Renaming the file changes it's MD5. I know right?
xSpeced said:
The file was corrupted/changed in some way so the MD5 doesn't match anymore.
MD5 sums are often used to compare files to see whether it's the same exact file. If that happens just redownload it, bigger downloads = higher chance of corrupting. I recommend SamMobile for all Samsung related stock FW.
P.S Renaming the file changes it's MD5. I know right?
Click to expand...
Click to collapse
I did use SamMobile for downloading. The only thing I did afterwards, was moving it from my desktop to another file location.
Then the md5 error came up, so I downloaded the same file again, but this time I tried to flash it from the download location, but the same error
But now my CM10 rom work, so at least my phone is up and running again. Won't bother for now about the stock rom.
Thanks for your help. Really appreciate it