Ok please help!!
I want to flash a 2.3.3 ROM (http://forum.xda-developers.com/showthread.php?t=1209891) and it says to install the latest kernal and baseband .71 so this is what i did..
1. first i flashed the X10i_3.0.1.G.0.75_1241-1846 and it had .71 baseband but i cannot root it through flashtool therefore no xrecovery therefore i cannot install the custom rom..
2. flashed x10i_2.1.B.0.1_GENERIC (.67 baseband) and then flashed .71 and my phone keeps restarting..
WHY DO DEVELOPERS THINK THAT EVERYONE ARE AS TALENTED AS THEM!! WE'RE NOT!! please make it easier to understand!! im so confused!
restore with SEUS, root it, install xrec. copy rom (2.3.3) on sd card and enter rec and install rom. do not reboot when its done, pull the battery out. enter flashtool, flash .71 baseband.
slikk76 said:
restore with SEUS, root it, install xrec. copy rom (2.3.3) on sd card and enter rec and install rom. do not reboot when its done, pull the battery out. enter flashtool, flash .71 baseband.
Click to expand...
Click to collapse
ill try this out now thanks..
There is a root method for Android 2.3.3, why do you recommend him to downgrade to 2.1 first?
that was my edit.... weird it didnt save? i wanted to add that he can also just flash a 2.3.3 and root it.... my bad
silveraero said:
There is a root method for Android 2.3.3, why do you recommend him to downgrade to 2.1 first?
Click to expand...
Click to collapse
can u tell me where i can find the generic 2.3.3 ftf file and the rooting procedure..
If you can upgrade you phone through PC Companion, do it. I will not recommend you use FlashTool to upgrade, but if you want ftf file. Here is it: http://www.mirrorcreator.com/files/0OIDEZNA/
Root method and xRecovery (for stock Android 2.3.3 not Eclair): http://forum.xda-developers.com/showthread.php?t=1196808
silveraero said:
If you can upgrade you phone through PC Companion, do it. I will not recommend you use FlashTool to upgrade, but if you want ftf file. Here is it: http://www.mirrorcreator.com/files/0OIDEZNA/
Root method and xRecovery (for stock Android 2.3.3 not Eclair): http://forum.xda-developers.com/showthread.php?t=1196808
Click to expand...
Click to collapse
yeh thanks alot mate
I essentially tried to do the same thing. now i'm stuck and phone will reboot, show SE logo, then give me the triangle with exclamation point, can't get beyond this point. i tried to repair phone through pc companion to no luck. any suggestions? also haven't been able to find seus or is that just the pc companion now? thanks in advanced!
tyler
tmacoubrie said:
I essentially tried to do the same thing. now i'm stuck and phone will reboot, show SE logo, then give me the triangle with exclamation point, can't get beyond this point. i tried to repair phone through pc companion to no luck. any suggestions? also haven't been able to find seus or is that just the pc companion now? thanks in advanced!
tyler
Click to expand...
Click to collapse
yes that is the pc companions.. update it through there and then follow the rooting method.. should work.
tmacoubrie said:
I essentially tried to do the same thing. now i'm stuck and phone will reboot, show SE logo, then give me the triangle with exclamation point, can't get beyond this point. i tried to repair phone through pc companion to no luck. any suggestions? also haven't been able to find seus or is that just the pc companion now? thanks in advanced!
tyler
Click to expand...
Click to collapse
both SEUS and PC Companion are different.
try re-installing or try using flashtool http://forum.xda-developers.com/showthread.php?t=920746
Using SEUS, it will work perfectly. PC Companion sometimes ... (what I have to say???)
i've tried both pc companion and seus and still nothing :/ when i use seus i get to the "connect device while holding back button" screen so i do, i get a green LED which stays on for about 20 seconds then goes off and is never recognized by seus. computer recognizes it......help this is very frustrating
thanks
tyler
Did you continue to hold the BACK key when connect the USB Cabble? You must hold it until SEUS tells you release it.
yes i tried that and now i'm getting a windows bubble saying "usb device not recognized" and then after a short while green LED turns off. sorry this is being so difficult...
Related
Flashtool dont recognize my phone.
I can flash tft, pc companion, ok, seus ok, superoneclick ok, but when i turn on flashtool, usb debug on, unknown res on, nothing happen.
I have all drivers, antivirus off, everithing off.
Is it posible to flash a ftf rooted with xrecovery?
I cant instal xrec. Tried flas 2.1, rooted with superoneclick.
But xrec nothing, manual way too.
Any sugestion pleeeease???
Fixed on 3 th pc.
Are you running as Administrator
Did you try another USB port
Do you have updated Sony pc companion/update service
are you on Win 7/Win XP/Vista ?????
Do you have the right Firmware/Baseband/Flashtool for your phone/Rom
Did you just start all over again reflash/root/xrecovery and read the how to and watch the video again
(DO NOT CLOSE FLASHTOOL)
Did you try:
This is Stock/Generic
http://forum.xda-developers.com/showthread.php?t=1196808 (This one has Videos)
This is Wolfs rom
http://forum.xda-developers.com/showthread.php?t=1192988 (this one has videos)
dukelc said:
Flashtool dont recognize my phone.
I can flash tft, pc companion, ok, seus ok, superoneclick ok, but when i turn on flashtool, usb debug on, unknown res on, nothing happen.
I have all drivers, antivirus off, everithing off.
Is it posible to flash a ftf rooted with xrecovery?
I cant instal xrec. Tried flas 2.1, rooted with superoneclick.
But xrec nothing, manual way too.
Any sugestion pleeeease???
Fixed on 3 th pc.
Click to expand...
Click to collapse
I believe that flashtool requires Java to be installed. Could that be your problem?
Sent from my X10i using xda premium
Hi
Yesterday i received my x10 from sony
It wasn't charging and they want 220 $ to fix it
i told them that i don't pay i send my phone back
Today i took it to a close friend a technical and fix the charging i was happy for a while but when i try to unbrick it i couldn't i wasn't chang to flash mode and it stuck . The xrevovery was working before i try to unbrivk it and now it isn't working plzzz helpp me
One sec..... Details plz. What's the problem actually? Charging / broken usb / flashing / xrecovery / phone stuck at se logo / phone not starting / etc. / etc.???
CheerS!
Milton --> From Sony Ericsson Xperia™ on ROM : "ThGo2 v11"
using XDA premium
" hit thanks if someone helps you! "
Hi thank you for saw my post
It stuck at se logo and i can't flash it
The xrecovery doesn't working !
Is your phone rooted? BL unlocked? Please provide the details.
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
paok1998 said:
ok look my phone before broke has alla of these things rooted xrecovery overclock custom rom i don't remember which custom roms !
Click to expand...
Click to collapse
You dont know which rom?...
OK, repair with pccompanion
Not much more advice can be given with scant information like that
do you want to record a video and upload ?
i am uploading a video and the rom that i was using was 2.1 oficial with xrecovery root etc.
My advice remains the same..use pccompanion to repair your phone.
Download it, instal it, run it...it will sort you out.
Sent from my X10i using xda premium
http://www.youtube.com/watch?v=HSX3E47vhMs look it
anyone can help me plzzz
Hi mate, i think i can help you.
1. Go google search for "Sony Ericsson Update Service" (SEUS) and install it.
2. Run the program,accept the terms and conditions,and select your device.
3. Now turn off your phone,if you stucked then remove your battery and place it back.
4. Press and hold back key then plug in the USB cable and conect to PC/Laptop.The direction is on the screen.
5. If the program detects your phone,then now wait and allow program to search for update.
6. If it says that your phone have the latest firmware installed, just continue and click Install.
7. Now wait for the program to download the firmware and wait to be installed.
8. After complete of install firmware, The program will ask you to disconnect cable and turn on your phone.
9. First boot may takes longer time and
Done! Your factory state X10.
Go on again to root/unlock and anything. ;D
-----------------------------------------------------------------------------
If the program cannot detect your phone,
download the Flashtool from here
http://forum.xda-developers.com/showthread.php?t=920746
and download also the firmware file(in .ftf format)
the flash it with flashtool
Give me a THanks if i helped you out
6.
I saw your video
First you are holding BACK button & and then your plug in usb, right?
I tried everything with flashtool with adb commands with flash tool and nothing should i open and do something at usb port ?
Can i get the xrecovery back ? for unbrick it with deamon guide ?
when you connected the USB cable did you already have the back button pressed or not? I could not see that from the video...
Run seus or pccompanion...hold the back button and then plug in USB
Sent from my X10i using xda premium
i was presing the back button
is there any solution to restore the xrecovery
paok1998 said:
i was presing the back button
is there any solution to restore the xrecovery
Click to expand...
Click to collapse
Yes...use pccompanion and repair phone then use flashtool to reroot and install xrecovery, the whole process will take about 15-20 minutes depending on your download speed for pccompanion....
the phone dosen't turn to flash mode
there is no green light
paok1998 said:
the phone dosen't turn to flash mode
there is no green light
Click to expand...
Click to collapse
Run pccompanion.
attach phone to pc in normal mode
click on start in support zone
click on start in next window
Let it check your phone
click on repair
follow the instructions
If it doesnt work on pccomapnaion download seus and try that.
If it still doesnt work, uninstall pccompanion and seus, reboot pc, redownload and install them and try again.
also, you can goto to the driver folder in the flashtool folder and run ggsetup to install drivers on the pc
let me know how that works, because if that doesnt then you have a hardware fault on your phone, not a software problem
do i have a broken usb port ?
So i tried to install Miui_Engineering rom onto my x10 and it got stuck at the SE logo screen, unable to do anything. I tried booting into recovery, tried using FT again, SuperOneClick, SEUS, PC companion, and none of them can recognize my phone, since it can't boot into anything. Can anybody help me?
search and download Sonyericsson Update Service (SEUS)...
install SEUS update SEUS
Connect phone choose update or repair phone
hope this help
Thank you man it worked this time around, don't know why it didn't work the first time..
My X10 gets as far as the Sony Ericsson logo but my computer wont recognize it. SEUS or flashtool wont recognize it either though it appeares I can get it into flashmode,like the green LED comes on and stays on. I have installed and reinstalled drivers multiple times and I have flashed stuff with flashtool before so I kind of know what I'm doing at least. Any Suggestions would be great.
tonyreimer said:
My X10 gets as far as the Sony Ericsson logo but my computer wont recognize it. SEUS or flashtool wont recognize it either though it appeares I can get it into flashmode,like the green LED comes on and stays on. I have installed and reinstalled drivers multiple times and I have flashed stuff with flashtool before so I kind of know what I'm doing at least. Any Suggestions would be great.
Click to expand...
Click to collapse
Try this :
1-Install Sony PC Companion
3-Download flashtool 9.0.0 and not the latest version (because the latest one doesn't work for the X10 I think)
4-Install the drivers located in flashtool's installation directory for ex : C:\Flashtool\drivers
4-Connect your phone in flash mode (plug the usb while holding the back button) and wait for the drivers to install
Just go back to stock 2.3.3 ROM, search for it on the forum, download it and then flash it using Flashtool.
you only need the drivers you have with pccompanion. latest flashtool works for me. search for "dixperia 7 avenger", there youll find stock 2.3.3 kernel. flash it with flashtool and retry to connect to seus.
Greets
Sent from my Xperia X10 using xda app-developers app
Hi. I cant power up my xperia 10 mini, i must install on it new rom. How can i install recovery without turned on phone ? Is it possible ?
apricot626 said:
Hi. I cant power up my xperia 10 mini, i must install on it new rom. How can i install recovery without turned on phone ? Is it possible ?
Click to expand...
Click to collapse
Does it react at all when you press the power button? Or is it comletely dead?
SmG67 said:
Does it react at all when you press the power button? Or is it comletely dead?
Click to expand...
Click to collapse
It reacts on everything, just ROM is bad and i need to install new, because this doesn't works. Its not rooted.
Sent from my Wildfire S A510e using XDA Free mobile app
apricot626 said:
It reacts on everything, just ROM is bad and i need to install new, because this doesn't works. Its not rooted.
Sent from my Wildfire S A510e using XDA Free mobile app
Click to expand...
Click to collapse
Start a Repair session in Sony Update Service or PC Companion, this will install the latest official firmware fresh ( you will lose all data ). I don't think there is another option.
If the phone still doesn't work after that i would think you have a hardware problem.
SmG67 said:
Start a Repair session in Sony Update Service or PC Companion, this will install the latest official firmware fresh ( you will lose all data ). I don't think there is another option.
Click to expand...
Click to collapse
I second that. Once you are on working stock, you can install recovery and take it from there.
SmG67 said:
Start a Repair session in Sony Update Service or PC Companion, this will install the latest official firmware fresh ( you will lose all data ). I don't think there is another option.
If the phone still doesn't work after that i would think you have a hardware problem.
Click to expand...
Click to collapse
Soo i just must connect my phone to pc to usb and launch Sony Update Service ? I cant launch rom.
apricot626 said:
Soo i just must connect my phone to pc to usb and launch Sony Update Service ? I cant launch rom.
Click to expand...
Click to collapse
don't connect your phone to the pc
you start Sony Update Service
you choose Update
It can't update, because your phone is not connected and it can't figure out which type it is
It will offer a Repair link
You can choose your model there
It will download the firmware
when it wants to flash the firmware: Press the back-button and plug the usb-cable into your phone ( alternatively: if your phone isn't off, connect the usb-cable and press home- and powerbuttons together ).
Wait till it's done and hope your phone turns on normally.
SmG67 said:
don't connect your phone to the pc
you start Sony Update Service
you choose Update
It can't update, because your phone is not connected and it can't figure out which type it is
It will offer a Repair link
You can choose your model there
It will download the firmware
when it wants to flash the firmware: Press the back-button and plug the usb-cable into your phone ( alternatively: if your phone isn't off, connect the usb-cable and press home- and powerbuttons together ).
Wait till it's done and hope your phone turns on normally.
Click to expand...
Click to collapse
Thanks. I will try this later
SmG67 said:
don't connect your phone to the pc
you start Sony Update Service
you choose Update
It can't update, because your phone is not connected and it can't figure out which type it is
It will offer a Repair link
You can choose your model there
It will download the firmware
when it wants to flash the firmware: Press the back-button and plug the usb-cable into your phone ( alternatively: if your phone isn't off, connect the usb-cable and press home- and powerbuttons together ).
Wait till it's done and hope your phone turns on normally.
Click to expand...
Click to collapse
Update service is just for a few phones and tablets. U20i isnt one of them. so i try PC Companion. i click Support Zone when phone is unplugged and choose U20i. it says connect your phone for step 3(update) but when i connect u20i, it says there is no new update
my phone is 11W31. i cant unlock bootlader. i installed a rom by using cwm. and yesterday i tried to install a rom by using flastool which wants unlock bootloader. and now phone doesnt open, freezes on Sony Ericcson startup screen, help please
burakzeytinci said:
Update service is just for a few phones and tablets. U20i isnt one of them. so i try PC Companion. i click Support Zone when phone is unplugged and choose U20i. it says connect your phone for step 3(update) but when i connect u20i, it says there is no new update
my phone is 11W31. i cant unlock bootlader. i installed a rom by using cwm. and yesterday i tried to install a rom by using flastool which wants unlock bootloader. and now phone doesnt open, freezes on Sony Ericcson startup screen, help please
Click to expand...
Click to collapse
Well.. if you read my post correctly... you shouldn't plug in your phone when it asks for update, leave it disconnected and then it can't recognise your model and assume it's dead, that's when you get a repair option. after that just follow the instructions.
SmG67 said:
Well.. if you read my post correctly... you shouldn't plug in your phone when it asks for update, leave it disconnected and then it can't recognise your model and assume it's dead, that's when you get a repair option. after that just follow the instructions.
Click to expand...
Click to collapse
i open Update Service
i agree license and click start
there isnt my phone u20i so i dont choose any one and click next
it says connect your phone
i connect my phone(my finger on back button)
it says no new update for your phone
burakzeytinci said:
i open Update Service
i agree license and click start
there isnt my phone u20i so i dont choose any one and click next
it says connect your phone
i connect my phone(my finger on back button)
it says no new update for your phone
Click to expand...
Click to collapse
Do it with pc companion, and DO NOT connect your phone when you choose update.
You will get a repair option, it let's you select your model, download the firmware and it wants to flash it to your phone. Then, when it asks for flashmode:
Plug in the USB-cable and then press Home- and Power-buttons together.
Only do that when it asks for flashmode, not before.
SmG67 said:
Do it with pc companion, and DO NOT connect your phone when you choose update.
You will get a repair option, it let's you select your model, download the firmware and it wants to flash it to your phone. Then, when it asks for flashmode:
Plug in the USB-cable and then press Home- and Power-buttons together.
Only do that when it asks for flashmode, not before.
Click to expand...
Click to collapse
i open Sony PC companion
click on Support Zone
click first one, and click repair(phone is not connected)
Continuous
Agree and next
Preparing, agree, next, agree, next
choosed U20i
it asks for connect my phone
i do
There is no update for your phone please try it later
burakzeytinci said:
i open Sony PC companion
click on Support Zone
click first one, and click repair(phone is not connected)
Continuous
Agree and next
Preparing, agree, next, agree, next
choosed U20i
it asks for connect my phone
i do
There is no update for your phone please try it later
Click to expand...
Click to collapse
Try THIS download, put it in the firmwares folder where you installed flashtool and flash it.
(Make sure you don't flash the x10blrelock.ftf under any circumstances, delete it to avoid mistakes)
SmG67 said:
Try /URL] download, put it in the firmwares folder where you installed flashtool and flash it.
(Make sure you don't flash the x10blrelock.ftf under any circumstances, delete it to avoid mistakes)
Click to expand...
Click to collapse
very thanks, it works
SmG67 said:
Try THIS download, put it in the firmwares folder where you installed flashtool and flash it.
(Make sure you don't flash the x10blrelock.ftf under any circumstances, delete it to avoid mistakes)
Click to expand...
Click to collapse
can i install MiniCM7Pro,
it says
Requirements:
- Root
- CWM
- Only 2.1.1.A.0.6 SE Firmware
- Baseband: M76XX-TSNCJOLYM-53404015
My phone
M76XX-TSNCJOLYM-53404006
2.6.29
2.0.A.0.504
burakzeytinci said:
can i install MiniCM7Pro,
it says
Requirements:
- Root
- CWM
- Only 2.1.1.A.0.6 SE Firmware
- Baseband: M76XX-TSNCJOLYM-53404015
My phone
M76XX-TSNCJOLYM-53404006
2.6.29
2.0.A.0.504
Click to expand...
Click to collapse
Do an update with PC Companion first, it should work now I think, because this firmware is unbranded. You need the *4015 baseband, otherwise you will lose connectivity.
SmG67 said:
Do an update with PC Companion first, it should work now I think, because this firmware is unbranded. You need the *4015 baseband, otherwise you will lose connectivity.
Click to expand...
Click to collapse
still cant find a new update,
but this time it shows my phone's name at the top of program and searches automatically for new updates
burakzeytinci said:
still cant find a new update,
but this time it shows my phone's name at the top of program and searches automatically for new updates
Click to expand...
Click to collapse
Check if this firmware already has the *4015 baseband, you should be fine if it does, even if the firmware as a whole is not 2.1.1.A.0.6. Otherwise i'll have to see if I can find something else.
SmG67 said:
Check if this firmware already has the *4015 baseband, you should be fine if it does, even if the firmware as a whole is not 2.1.1.A.0.6. Otherwise i'll have to see if I can find something else.
Click to expand...
Click to collapse
My phone is 53404006 and 2.0.A.0.504.