Related
I created a patch, which increase volume on this device.
WARNING:
You use this patch on your risk. I give no warranty to you.
You should make back up before installing it.
First patch increase volume rather safely (without sound distortion).
Second patch increase volume more aggressive, so you can harm your device (sound distortion sometimes).
Installation
Copy cab to your device and launch it.
Turn off and turn on sound. All.
Possible you need to install certificate.
Looks interesting, thanks.
I didnt realize you had to reboot to apply the patch, but after rebooting, I get a message saying either my phone is not a 6815, or the firmware is unsupported. I'm using the HP firmware released at the end of June.
Oops
zer0day said:
I didnt realize you had to reboot to apply the patch, but after rebooting, I get a message saying either my phone is not a 6815, or the firmware is unsupported. I'm using the HP firmware released at the end of June.
Click to expand...
Click to collapse
I was going to try... not anymore...
Please give some feed-back...
Probably, you have another ROM version.
Please upload here WaveDev.dll file.
(You can use my ROM Extractor for it. )
Also please post your model (6815, 6818, 6828) and ROM version.
Wavedev.dll
Hi,
the are my Wavedev.dll, rw6815 iTA ROM, 1.012, BL 1.00.5
Thank you for fix!
New fix on volume tuning?
I just read the topic for volume tuning of my HP 6815, for me also was the case that my rom was allready updated to the newest version of june/july 2007. Via this way i would like to asak the programmer if there is allready a version that's working on the new bios update.
I hope some one can help me, with this one.
Greetz,
Hans
Volume Patch
I have last WM5 ROM from HP too and have same problem , can somebody help us with volume fix . Thx Knight
Must I do anything special to activate this, or do I just have to reboot ? Is this only for the 2 stereo speakers on the front, or does this boost the volume on the build-in earpiece when talking on the phone as well ? I installed it, and rebooted my rw6815, got a popup regarding the software, but I don't seem to note any difference when making calls. I installed "HP6815AudioTuning1.CAB"
Hi,
any one cofirm if work ?
i have rw6815 ROM 07/07/25 1.0
ROM Version 1.12.00 FRA
bootloader 1.0.5
OS Version 5.1
Thanks
Here my Wavedev attached.
md5sum f9367e5fb06b60218e7a3736a00468ae
Thanks.
I confirm, is not work
after rebooting, I get a message saying either my phone is not a 6815 or the firmware is unsupported. i remove patch from add/delete program, and the message gone (after rebooting).
please, please, any patch for my rom version ?
Thanks.
How do I uninstall ?
jazenf said:
How do I uninstall ?
Click to expand...
Click to collapse
from add/remove program, like removing software
I checked, it's not there, but I found another way to uninstall.
Thanks for the reply
Have you any solution for tuning volume of this phone ?
Thanks.
Hi. please me DLL fix.
HP Ipaq rw6815
ROM Version 1.12.00 WWE
bootloader 1.0.1
OS Version 5.1
Hey Xda-developers. Just quickly, I found this Forum from a few links on other websites (gizmodo, engadget) and some youtube videos of your awesome custom ROMs.
I for my HTC Hero in March, and I should be upgrading around christmas 2011. That's a while, and Android grows fast..much much faster than HTC update my device, so I'm thinking a custom ROM is what I really want.
I've done my research, but honestly I'm pretty much a noob here. I know I need to root the phone, but I've been unable to find any specific instructions for 3 UK, and as far as I can tell all the different carriers use different instructions (a different ROM to downgrade to?), so I don't want to use the wrong ones.
-
Phone Spec
Okay, this is a standard HTC Hero on a 24 month contract carried by 3 UK.
There has been no rooting, no major changes. I have done no more than officially supported. A complete from scratch root would be required.
Currently running 1.5.
UK, 3 Mobile, GSM.
No hardware replacements and no known issues with the phone.
-
I think that's about all, is somebody here able to point me to the right place for a 3 mobile root?
Thanks in Advance,
Callum.
I'm also on 3uk and i rooted my phone using the following guide:
http://androidforums.com/all-things-root-hero/54802-how-root-install-custom-rom-backup-more.html
Hope this helps.
Thankyou very much for your help! I'll be giving that guide a go later.
No probably m8, SenseHERO is a good custom ROM.
Any trouble just post up and ill try and help you out.
Hmm, if I could ask you to take a look at a post, that'd be really helpful. No worries if you don't have a clue though.
Hero, G2 Touch Android Development >
[Guide] Complete Newbie Guide to Install a Custom Rom & Newbie FaQ [Updated 02/05] >
Page 33, Post 1.
Sorry that link is so bad, but they won't let me post a proper one.
That thread was alternative 2 for the 3uk guide you gave me (goldcard section). I'm not sure whether you'll be able to help me, but if you could take a look that'd be massively helpful.
Cheers,
Callum.
I posted a reply to more or less the same problem earlier.
http://forum.xda-developers.com/showpost.php?p=6701261&postcount=268
Let me know how you get on.
Thankyou very much for your reply, but I have already done all of this. I've successfully performed a goldcard on my SD and I'm really close to getting a working custom ROM, but it's dying somewhere there. I have already installed the x64 drivers though.
HTC Sync works perfectly, picking up the phone and synchronizing on demand.
Thanks,
Callum.
What guide are you using, i used this was one to create a goldcard and downgrade:
http://forum.xda-developers.com/showpost.php?p=5855697&postcount=1
The only problem i had was syncing after installing the latest version. I fixed it by downloading a driver manager and updated the drivers for it.
I take it it lets you mount the SD card on your computer?
One thing that might be worth a try is to download the ROM again, it might be corrupt, a shot in the dark but worth a go.
That's the guide I ended up at, after following a link within the guide you provided above.
It does indeed allow me to mount the SD card, everything syncs perfectly. I'll give re-downloading the ROM a go, though. There was two available, so I'll try the other download.
Hmm, I've tried everything I can think of, and nothing is working on this Windows 7 machine. My brother's XP machine is broken, and my dad's away with the XP notebook.
Is there any way that anybody knows of to run XP as a virtual machine temporarily?
Here's a link for a virtual box:
http://www.virtualbox.org/wiki/VirtualBox
I dont know how to run it though.
Someone had a similar problem on win7 yesterday and sorted it by getting a new gold card. Might be worth a try?
Aha, I re-downloaded goldcard, and switched the driver to My HTC once with it normally plugged in, then with bootloader open. And it downgraded!
I've got the Scenehero on the SD card now, I'm just unable to launch the custom recovery screen. It will start normally by hitting power, but while the home button is also held it just loops the first hero screen. Is there any way past that, because I need to perform a wipe and flash scenehero.
Thanks so much for your help so far, you've been amazing!
If your all set up properley you should be able to connect your phone via usb to the PC,
then open a command window and type>"adb shell devices"
your phone should show in the window something like HTLK12345
now type> "adb shell reboot recovery"
this should boot your phone into recovery mode.
Hope this helps.
Thankyou very much for your help, I solved the problem by re-installing my recovery. Not sure what went wrong but it worked after that. All looks good now!
good stuff m8, glad your sorted.
what rom are you running?
I'm currently using the latest version of Sensehero. Really pleased with it so far.
I'm on branch 3, waiting for branch 5, should be here soon hopefully.
If you have'nt already m8 check out the site:
http://www.htcdevscene.co.uk/
Some top lads over there having a good time!!.
Hello again.
Well, more than 24 hours have passed since my original posting and nothing! Many of you read my post, but nobody felt able or willing to offer to help.
So, terrified and having no clue as to what I was doing, after another day of work - success! Amazing! And, I think, more by luck than anything else...
I am going to list below what I did, in the hope that some other poor soul might find something useful in it.
But I cannot stop myself from saying that in this whole website I was unable to find a CLEAR, ORGANIZED and COMPLETE procedure or tutorial about how to upgrade the HTC Hermes - a great pity. It would be a worthwhile endeavour to produce such a document, in language that anybody could understand. No, not even the definitions in the Glossary are enough.
This is what I did:
Preliminaries
- Since I'm working on a Windows 7 Home Premium laptop, I have first installed new drivers for the Mobile Device ("x64 AS Drivers Win 7 Tested & Working") - useful info here: http://www.techparaiso.com/windows-...flash-junkies-on-windows-mobile-phone-devices
This was done in preparation to installing Mitty.
Since these drivers are not signed, you have to restart the laptop, press F8, select to start windows without checking Digitally Signed Certificates
- Installed Mitty
- Installed Hard-SPL-V7 - this one seem to be permanent
- Then I tried to follow the Hermes Upgrade Guide (http://forum.xda-developers.com/wiki/index.php?title=Hermes_UpgradeGuide ) - no luck. No idea what was wrong, but in Step 7, I did not have any files named 00_IPL.nb, 01_SPL.nb to delete as per instructions, so I abandoned this course
What worked:
(still with Hard-SPL-V7 installed, still with drivers for Win 7 installed, still with laptop started with Windows - F8 - disable drivers signature checking)
- In the end, I downloaded 21501_1_Springtime.zip from http://www.ferretlife.com/josh/ (once again, many thanks to Hakim Rahman for pointing me to this ROM!)
- I unzipped the file in its own folder; this produced 2 files:
RUU_signed.nbh <= this is the actual update file
RUUWrapper.exe <= this is the program we have to run that will take the RUUWrapper.exe (after we rename it to HERMIMG.nbh) and apply it to the HTC Hermes
- I renamed RUU_signed.nbh to HERMIMG.nbh
- At this point:
I connected my Hermes to the laptop with the USB cable and waited until it was recognized and WMDC came up and connected to the Hermes
I configured WMDC for sync and partnership (did not check more than "Notes" for sync, since I was not really interested in any sync)
- I ran RUUWrapper.exe (from its folder on the laptop) and followed the prompts
○ => I chose proper ILP - for me it was IPL-1.04 and SPL-2.10.011pro (the AutoDetect did not work for me, whether I checked the "Is it a hard SPL?" or not)
○ => after program got to "Verifying ..." it produced Error 260 - at some point, the device was disconnected from WMDC (ActiveSync)
- All that is left is to shut down WMDC, soft-reset Hermes and try again. In one of the many tries, amazingly, it got to start the Upgrade on the Hermes before I got the Error 260, and, although the Error 260 was displayed, it continued with the upgrade and ended successfully, but it did not reboot the Hermes - I turned it off and on again - it worked!
Still confused, but elated by my luck,
Ily426
----------------------------------------------------
Jan 27, 2010
Hello everybody!
I am a real, total, complete, hopeless, newbie and I'm writing in the hope that some kind soul with knowledge and experience in upgrading may be willing to hold my hand for updating the OS on my Hermes.
I have been reading the xda-developers.com on and off for about a week now and all I can say is:
1. I am awe-struck by the passion and knowledge of the people active on this site
2. I am overwhelmed by all I have read - I fear I do not understand much of it, certainly not enough as to have the courage to proceed with the update by myself
This is where I am now:
1. I have installed Mitty on my PC and even made it work (!)
2. I ran one of the many Hard-SPL-V7 to be found here and the bootloader screen did display the modified info; eventually, I clued in to the fact that the changes this software made to my HTC were only temporary
3. I regrouped and now:
- I have read more than once the Hermes Upgrade Guide at http://forum.xda-developers.com/wiki/index.php?title=Hermes_UpgradeGuide
- I have downloaded and decompressed:
Hard-SPL.zip
[*]ModifiedRUUUpdater-V2 (ROMUpgradeUt.exe)
[*]NBHextract
[*]nbhgen0.1
[*]RUU_Hermes_WWE_WM6.5.28205.MobileVista6.50SeaDragon_UC_YouTube_V2_by_ansar
At this point, I'm ready to follow point by point the instructions in the Hermes Upgrade Guide, but I have a lot of questions about what each of these software is, what they do, how they should be installed or run.
Bottom line: I'm terrified!
That's why I would love to find a kind mentor and helper, to hold my hand and direct me in the actual upgrade.
Anybody? Please PM me. I am available on Skype. I live in Toronto, so my hour is same as New York.
I have an HTC Hermes 200 (TyTn), originally from Rogers (Canada). I had it unlocked (SIM unlock?) by a technician in a store a while back and I can use different SIM cards with it.
Very gratefully yours,
ML
P.S. Forgot to mention: I'm working on a Windows 7 Home Premium and I did update the drivers with "x64 AS Drivers Win 7 Tested & Working"
Goooooooooooood is it work with my herm 200
I sent a "Quick Reply" yesterday, but I can't see it anywhere - ?!
So here I go again. First of all, I want to thank you for writing - as you might have noticed, nobody else had anything to say in response to my post, certainly nobody offered to help.
Secondly, I'd like to ask if you installed Josh's "Springtime" ROM to your HTC Hermes and, if so, how is it working for you.
I'm having problems with it: various sounds (especially when booting, but not only), various "phantom screens", i.e. screens that flash so fast that I don't get to see what's on them, but appear empty. Also, today, when attempting to pair a BT headset, the device froze. The only way to fix it was a hard-reset, thus a reinstall of the ROM (lost all data...). Tried again the pairing with the Bluetooth headset - this time it worked. Loaded data again OK. Made a change in the order of the items in the Today screen OK. Tried to have a look at the insides of the device with "My Mobiler" and - without my actually doing anything, my Hermes is now - again! - frozen.
I'm getting fed up with this, it gives me no confidence at all in the ROM. Any thoughts?
Ily426
Ily426 said:
I sent a "Quick Reply" yesterday, but I can't see it anywhere - ?!
So here I go again. First of all, I want to thank you for writing - as you might have noticed, nobody else had anything to say in response to my post, certainly nobody offered to help.
Secondly, I'd like to ask if you installed Josh's "Springtime" ROM to your HTC Hermes and, if so, how is it working for you.
I'm having problems with it: various sounds (especially when booting, but not only), various "phantom screens", i.e. screens that flash so fast that I don't get to see what's on them, but appear empty. Also, today, when attempting to pair a BT headset, the device froze. The only way to fix it was a hard-reset, thus a reinstall of the ROM (lost all data...). Tried again the pairing with the Bluetooth headset - this time it worked. Loaded data again OK. Made a change in the order of the items in the Today screen OK. Tried to have a look at the insides of the device with "My Mobiler" and - without my actually doing anything, my Hermes is now - again! - frozen.
I'm getting fed up with this, it gives me no confidence at all in the ROM. Any thoughts?
Ily426
Click to expand...
Click to collapse
to BT headset you can try the way of sas90850 in http://forum.xda-developers.com/showthread.php?t=273105&page=2
Thanks for the suggestion - I'll check it out.
In the meantime, my HTC Hermes (with its new "Springtime" ROM, installed and re-installed several times) continues to freeze at various times, for no reason I can fathom. I'm not a happy camper...
hello,
i bought the new lenovo ideapad a2107a in germany last week.
unfortunately there is no good support by lenovo until now.
i want to buy the original case shown on lenovo us website but can´t find it on web.
where can i buy it ???
another question is, i read about a build in fm-radio at the tablet, but i can´t find the way to switch it on.
can anybody help me ?
and i don´t understand why there are 2 sim slots for 3g / gsm. is there any telephon function too ?
i hope there is somebody who can help me ?
where can i find a manual and description which shows me all functions ?
thank you and best wishes
herbert
Hi...
I am also looking for that FM Radio but I couldn't find, tried one apk from the web but it doesn't work properly.
one more thing this tablet is able to make phone calls (check youtube) but mine has no phone icon, when I called Lenovo people, they've told that in my country (UAE) Lenovo doesn't have the license for that yet and they will get it once they launch their mobile phones, I tried a third party app it gave some license error.
for online user guide check: download.lenovo.com/consumer/mobiles_pub/ideatab_a2107a_ug/data/EN/index. H T M L
I have this phablet (purchased direct from China).
I have successfully read-back the ROM and am in the process of packaging it for backup purposes using the MTK flash tool.
Additionally I was able to flash a CWR based recovery using MTKdroidtools and successfully flashed gapps. Oddly enough Maps would not install and I had to sideload a recent copy of it. MTKdroidtools root facility also worked without issue.
Synman said:
I have this phablet (purchased direct from China).
I have successfully read-back the ROM and am in the process of packaging it for backup purposes using the MTK flash tool.
Additionally I was able to flash a CWR based recovery using MTKdroidtools and successfully flashed gapps. Oddly enough Maps would not install and I had to sideload a recent copy of it. MTKdroidtools root facility also worked without issue.
Click to expand...
Click to collapse
that's awesome news. I recently bought it myself and have been looking around for a root toolkit.
However, root isn't going to be much helpful without some roms, which i doubt will be available anytime soon.
Lenovo also isn't supporting this tablet so i doubt we'll be able to get past the 4.0 version
---------- Post added at 05:50 PM ---------- Previous post was at 05:19 PM ----------
could you attach mtkdroidtools or the link to it?
MTK Droid Tools (can't remember where I found it)
http://www.shellware.com/projects/mtkdroidtools/MTKdroidTools_v228.zip
Here's the CWR variant I found that works (again, can't recall where I found it). Patch it in with MTKDroidTools and you can then safely apply unsigned updates such as gapps. Be sure to back up your stock ROM first. That way when you're done you can reapply Lenovo's recovery using the same procedure you followed for the CWR version.
http://www.shellware.com/projects/mtkdroidtools/recovery.rar
One oddity I've found is that BT and wifi crash if they're both on and active. AVRCP is also a little flakey but I can usually get it to work using the as built music.apk.
update
Here's the CWR variant I found that works (again, can't recall where I found it). Patch it in with MTKDroidTools and you can then safely apply unsigned updates such as gapps. Be sure to back up your stock ROM first. That way when you're done you can reapply Lenovo's recovery using the same procedure you followed for the CWR version.
One oddity I've found is that BT and wifi crash if they're both on and active. AVRCP is also a little flakey but I can usually get it to work using the as built music.apk.[/QUOTE]
is there any update of the china version, i had a latin version from peru, android 4.04 and i flash it cause i wanted to use the tablet to make calls, but this china version has lots of china app, it doesn't have google services, could you please help me to update without thia app, or just return to the other version?, do you have another stock rom pleaseee???
FM Radio
herbertleichtfuss said:
Another question is, i read about a build in fm-radio at the tablet, but i can´t find the way to switch it on.
can anybody help me ?
Click to expand...
Click to collapse
Most FM radios are only accessible if you have your headphones plugged in, they use the wire as an antenna. Init a suggestion. Try opening the stock Music app, in the menu.
Lenovo a2107a stock, headphones do not bypass speakers
I bought this tab a couple years ago for my wife to use as a reader. Lately she has been reading an ACTUAL BOOK and leaving the tablet at home. This week, while my kids were on winter break and monopolizing my laptop and other devices, I was using the tablet to watch netflix and stream movies from my WLAN. My youngest pointed out, mid Nightmare on Elm Street, that she could still hear the movie even though I had my headphones plugged in. It was then that I realized that the audio was continuing to play through the external speakers while also playing through the headphones. The rom is stock. I did install the MX player and codec to stream the mp4's, but I have not otherwise monkeyed around with the system.
I used a couple of different sets of wired headphones and tried netflix and youtube, and also manually setting the tablet to silent mode, but none of these things fixed the problem. It would seem to me as if there is a driver missing. I'd like to avoid a factory reset if at all possible, unless it would be a guaranteed fix.
This seems like the type of problem which someone with a moderate understanding of the droid os might be able to solve using just their own knowledge base. I'd appreciate any insights.
Greg
I recently purchased an RCA Voyager III model RCT6973W43 and I've noticed no one has said anything about how to root this one yet. I've heard of users who have had success with rooting the original Voyager and Voyager IIs, but there's nothing on the Voyager III. I think it's possible that the same procedure for rooting those devices might work for the Voyager III, but I don't want to take any chances in case it bricks mine. So is there a whole different procedure with my particular device? Or is the Voyager III simply too new?
Bump
RobinHood16 said:
I recently purchased an RCA Voyager III model RCT6973W43 and I've noticed no one has said anything about how to root this one yet. I've heard of users who have had success with rooting the original Voyager and Voyager IIs, but there's nothing on the Voyager III. I think it's possible that the same procedure for rooting those devices might work for the Voyager III, but I don't want to take any chances in case it bricks mine. So is there a whole different procedure with my particular device? Or is the Voyager III simply too new?
Click to expand...
Click to collapse
Bump!
Yes please!
I tried RCA to see if they would at least update the tablet and turn on the FM receiver. They claim it doesn't have it. I'm pretty sure it has both the FM and a GPS receiver built in. I think I also found a "clone", the DigiLand DL721-RB appears to be the same hardware.
What I'm trying to do is simply enable all the features the hardware has. The Atom x3 is supposed to have pretty much all the standard stuff, my RCA RCT6973w43 (on sale at Walmart right now for $37) does OTG nicely, but if I had the FM also it would be perfect for a tablet based car stereo. If anyone figures it out and can get the FM and or GPS going, I'd be tickled.
I just bought a couple of these for 25 bucks. I would very much like to get them rooted. Any news on if the method for the other Rca's works?
No good. I attempted to root the Voyager III with One Click Root, and it told me it was unrootable for the time being.
Any clues yet?? everyone owns this tablet figured there'd be a root already for this one.
i read where someone tried to root the 43 using 42, and it bricked the tablet, so i'm reluctant to try it. don't know if the 42 and the 43 had the same processor, or what makes them so different it would cause that to happen. maybe we can get a bump.
keep finding tons of people looking for root, but not dice so far. i've only got one cuz they were sold out. actually bought the display model. wish i had more than one so i could experiment. 8(
I'd been able to install twrm halfway then it fails signature verification.
Just got one of these! Bump
yes bump!!!! I can't believe this hasn't been rooted yet. is it because it's an intel x86 architecture?? I'm guessing it would require someone to compile the code for sudo/su/root to run on it??
anything yet?? 8(
---------- Post added at 02:04 AM ---------- Previous post was at 01:39 AM ----------
just as a quick notei found this guys.
http://specdevice.com/showspec.php?id=7920-d3ef-0033-c5870033c587
it's an alco tablet with the same model # as the voyager 3 RCT6973W43.
weird thing is it appears to have a quadcore arm processor, and not an intel atom.
i heard there was a root for the alco from twitter profile @srsrOOT, but they haven't responded yet.
no clue if this will help at all. I would imagine if the alco has an arm proc, and the rca has an intel then we'd need a different su/sudo binary for the RCA because the RCA runs on a CISC processor, and the ARM is a RISC. hope there's some clues here. hit us back with any info you find. 8(
look here
bump
Thought Id try bumping this. Sorry itll prolly be gone soon.
This tablet is begging for a root. I did a bunch of adb uninstalling and got rid of google play stuff. Battery is MUCH better. I suppose a custom rom would immensely improve battery.
TimmyP said:
Thought Id try bumping this. Sorry itll prolly be gone soon.
This tablet is begging for a root. I did a bunch of adb uninstalling and got rid of google play stuff. Battery is MUCH better. I suppose a custom rom would immensely improve battery.
Click to expand...
Click to collapse
Did you guys unlock the boot loader yet?
Code:
adb reboot fastboot
fastboot flashing unlock
If so, you can try and boot the cwm recovery I use on mine(RTC6873W42) to get a root shell. (if the kernel drivers were the same it would actually be full recovery enviroment) And with that root shell you could pull your boot.img . The expected result of the fastboot boot command is an attempted boot to cwm recovery except the screen will be blank, and adb will give root shell access.
Code:
fastboot boot v31-test-rca-recovery-cwm-ramdisk-20170709-2052.img
https://www.androidfilehost.com/?fid=961840155545581102
And with the pulled boot.img you can make the recovery fully boot by swapping the kernel, then manually change some rc files in the ramdisk folder of the boot.img the allow it to be rooted.
When you get that far, and if you need help, just ask.
This doesn't work with an RCT6973W43, I'm afraid. I get the blank screen from "adb reboot fastboot", as is apparently expected, but while the RCT6973W43 is in this mode, Windows doesn't recognize the device at all, as there are no drivers available. Also, it keeps disconnecting and reconnecting, so that "fastboot flashing unlock" can't get a fix on the device -- it's stuck on "< waiting for any device >" forever, and can only be stopped with Ctrl-C. Otherwise, the only way to restore the device to working order is a hard restart.
RobinHood16 said:
This doesn't work with an RCT6973W43, I'm afraid. I get the blank screen from "adb reboot fastboot", as is apparently expected, but while the RCT6973W43 is in this mode, Windows doesn't recognize the device at all, as there are no drivers available. Also, it keeps disconnecting and reconnecting, so that "fastboot flashing unlock" can't get a fix on the device -- it's stuck on "< waiting for any device >" forever, and can only be stopped with Ctrl-C. Otherwise, the only way to restore the device to working order is a hard restart.
Click to expand...
Click to collapse
That connect disconnect is expected when Intel drivers for fastboot not installed. I will link you to my write up on how to install
https://raw.githubusercontent.com/m...ster/unlock_tool/manual root instructions.txt
Read the document and follow directions in the driver install section. If trouble let me know
Neither of these builds works for me. My build number is RCT6973W43-ANDROID6.0-V16-V1.18.0-M01. Also, even if I could find the correct files, the Intel drivers don't work with my device.
RobinHood16 said:
Neither of these builds works for me. My build number is RCT6973W43-ANDROID6.0-V16-V1.18.0-M01. Also, even if I could find the correct files, the Intel drivers don't work with my device.
Click to expand...
Click to collapse
Sorry this is giving you such trouble,
but if you cant get the drivers to work, then you hae no way to know if these files will not work on your device.
If you are refering to the "tools" then, yes they will not work, as I coded them to not work if build numbers are not matched. But I never suggested tring the "tools". just the unlock and "fastboot boot" steps
again , If you cant get windows drivers to install then , thats as far as you can go.
I had a pictoral 'guide' for doing it, but cant find it right now.
In that case, my only recourse is to give up. It seems to me that they have made this tablet absolutely unrootable.
i managed to unlock bootloader
i used the method here https://raw.githubusercontent.com/m...ster/unlock_tool/manual root instructions.txt to unlock boot loader only difference is the fastboot screen flashes just input unlock command and keep taping up it works dont really know where to go from here
seasonednovice said:
i used the method here https://raw.githubusercontent.com/m...ster/unlock_tool/manual root instructions.txt to unlock boot loader only difference is the fastboot screen flashes just input unlock command and keep taping up it works dont really know where to go from here
Click to expand...
Click to collapse
Did you attempt my directions at the end . To boot the modified cwm , to get adb root shell?