Related
I am on an AT&T stock streak I just bought (1.6), and EVERY SINGLE recovery I've flashed, after I hold the power and volume buttons, and select the second option, I just a black screen that is lit up. No buttons do anything, and it just sits there. as I said, it's EVERY recovery. The old clockwork, the new clockwork, the fixed clockwork on the forums, the alternate fixed clockwork, streakmod, and streakmod beta.
Well, the old clock work (1.5.4 or something) just goes nuts with the LEDs on the buttons and when I select something the screen just turns black. I know I'm doing everything right, when I install a recovery with fastboot, it says successful and everything. I just can't figure it out. Please, please help me.
Bump, I'm about ready to just take it back because 1.6 sucks so bad.
You can not just flash roms on your stock 1.6 streak, you need to change its buil first to 305, or 318, 319 or 322 because those roms were not meant for your phones build. Try following the instructions on streakdroid.com there is a guide there that will walk you thru.
Sent from my Dell Streak using XDA App
I just got a Streak a few days ago as well. It isn't super easy to figure out what to do with this phone, since most of the information is on other sites, whereas with other android phones most of the info is right here on XDA. Basically, all you need to do is install drivers on your PC, then download and flash using QDL Tool. That will put you at 2.2, and from there you can install whatever you want, including different recoveries.
Check out streakdroid.com for tutorials.
Sent from my Dell Streak using XDA App
There are a few upgrade/downgrade/recovery/rom threads in the development section. with decent instructions.
Hey everyone - I just got a new Rogers Dell Streak. Like a good noob, I followed a guide on how to upgrade the rogers build 7921 and I'm now at Android 2.2, Build 10688. Everything seems to work OK so far, but the home, menu and back buttons flash every 1 minute exactly. Doesn't seem to matter what I'm doing, it's almost as if it's a notification of some kind. They do not flash while the screen is off (sleep).
I followed a few different guides and I think this may be the issue but I thought I'd ask first. the first thing I did was use QDL Repair Tool to upgrade to a dell release of 2.2 (I guess)... the last thing I did was follow the StreakDroid Rom installation instructions using StreakMod Recovery, amss.mbn, and then tried to install Streakdroid 1.6.1, but it wouldn't boot properly, so restored 2.2 using nandroid.
I've done some searches but couldn't really find an answer to the issue I'm having.
If anyone could give me the step required to correctly upgrade the Rogers version of Dell Streak I'd really appreciate it. Ideally I'd like to get to a stable version of 2.2 (DJ_Steve's preferably, but I would be OK to go to the new release from Dell if it would work right).
thanks everyone!
-Steve
Never mind everyone. I figured it out. I reverted back to a stock Rom and recovery and started all over. I'm now using cw recovery and Dj_steves 1.8.1 Rom.
Everything seems to be working great!
Cheers!
STEVE
Sent from my Dell Streak using XDA App
How would I go about flashing a rom, through my computer? Meaning not using Clockwork Recovery Mod. My Streak won't flash roms through Clockwork, so I'm wanting to try to do it through my computer.
You really need to search.
Streak Wiki at xda-developers.com – includes DL links for ROMS and a ROM reference, lots of good info. Start here!
Radimus’s Universal Guide to Flashing a ROM – MUST READ if you want to flash a ROM or upgrade
Modding your Streak – where to start? – my take on Streak Modding
Flashing Guide by TheManii at XDA Streak Wiki
Dell Streak – The Complete Guide – thread at XDA that includes a somewhat dated PDF with Streak hacking basics. Read the thread for follow-up! Written prior to Android 2.2 for the Streak.
I am using dell streak 2.2.2 with streakdroid 1.9.1
After using it for 3-4 days everything started force closing.
For eg.-
process com.google.process.gapps
process com.android.mms
process com.google.android.gm
process com.cooliris.media
etc etc....
I factory reset my phone nd den tried it again but again the same problem after 2 days..And a lot of other downloaded apps also start force closing. I am fed up of factory resetting my phone again and again.
Thnx..
Hello. I'm a 55 year-old newbie to the wonderful world of Android, courtesy of my kid's continuously-rebooting Dell Streak 5 (AT&T, USA). It all started with the Froyo 2.2 OTA update in late 2011. The Streak would not boot after that update completed (WiFi - FIOS). We called Dell, and they advised that we Factory Reset it. That worked, and we thought all was well. Now several months later and 2000 factory resets later, my kid requested an iPhone for Christmas, and I re-claimed the Streak. I called Dell last week, and of course they wasted several hours of my time, ultimately telling me that my phone was out of warranty, but that for $249 I could buy a new phone. I advised several reps and a supervisor that Dell's OTA 2.2 update caused the problem, and that I should not be charged for any resolution to that problem. End of that story - here I am, after spending all of Saturday and most of Sunday attempting to downgrade back to 1.6. Here's what I have done:
I used SuperOneClick and successfully rooted the phone
I have used many recovery mods, ALL of which seem to lead to a black screen after selecting option 2. However, the Clockworkmod "alternate" recovery method did work. I downloaded a 4399 stock recovery zipped file, copied it to the Streak's SD card, then renamed the entire zipped file to "Update.zip". Then I used FastBoot, and flashed the Clockworkmod alternate recovery "recovery.alt.img" to the Streak. I used fastboot to reboot the Streak, then held the two Volume buttons, selected Option 2, and made my way through the awkward menu - but ultimately I was able to install "Update.zip" successfully. Upon the reboot, I am stuck with the Dell logo. I have tried factory resetting at this point, starting again from "scratch", only to return to the same old story: stuck at Dell logo. I read somewhere that it could take 10 minutes for the Streak to boot, but I have waited for 30 minutes plus.
An hour ago I was too frustrated to continue trying to downgrade to 1.6, so I read this thread: http://forum.xda-developers.com/showthread.php?t=1334487. I used the clockwork 3.0.1.9 recovery method, and attempted to upgrade to 2.3.?. This was not an "alternate" method (which had not worked in two days), but after flashing the recovery.img to the Streak, and using the 2.3.? "Update.pkg" on the SD card, the Streak did begin to verify the package - then it started the update, then - REBOOT. The first time this happened, I waited for 30 minutes, thinking that the upgrade was happening in the background while displaying the Dell logo, as Windows updates sometimes do. But then I yanked the battery, and started that process again. The next time and every subsequent attempt to perform this upgrade results in a reboot as the "verifying package" is occurring.
At this point I feel as though I am spinning my wheels, so I'm putting out an All Points Bulletin for some advice and/or help.
Thanks in advance! John in Dallas
John, have you tried with another update.pkg? The thread you link to is from sreak 7, could that be the issue? If I was you I would try one of the 407 deodexed ROMS from http://forum.xda-developers.com/showthread.php?t=1376896
I did not realize that thread was for the Streak 7. Thanks for pointing that out. I have tried several others, but nothing like what you have provided.
Being new to this technology, I have not yet quite grasped all the terminology and theory. Can I mix and match the recovery images with the Update packages? For example, where "TheManii" states that StreakMod must be pre-installed, then he provides a (407) base_v1.zip , is it OK for me to use the Clockworkmod recovery.alt.img (which has seemingly worked well on my Streak) with his base_v1.zip? Or MUST I use the StreakMod recovery image in conjunction with his base_v1.zip?
I assume that I am supposed to follow the same procedure as before:
- Save the base_v1.zip to the Streak's SD card - renamed to "Update.zip"
- use "fastboot mode" to transfer the recovery.img from PC to the Streak
- boot the Streak into recovery mode, select option 2
- then select the recovery option to load from the "Update.zip" on the SD
How long should it take to install the base and the update?
I understand that the "base" is just that, and I will also need to flash the "update", but the other "bloat" stuff is optional.
I will give this a try shortly - then re-post. Thank you!
I am not the expert here, but from what I've gathered you need the correct recovery image only when you are flashing an official update, since those updates come as encrypted ".pkg" files. I think (please check also the threads on flashing modified ROMs) that ROMs that end on ".zip" are not encrypted and don't need a special recovery file. I hope someone with actual experience on this can confirm if I am correct.
Edit: I just notice that the thread I linked to specifies that installing the matching "pkg" is a prerequisite to installing the "zip" -- this is admittedly more complex than I thought it would be. You are probably better off just installing one of the stock ROMs first just to recover your Streak -- I had recently updated to the 407 (Korean) Gingerbread ROM and like it very much; there are instructions of puttiing it here: http://forum.xda-developers.com/showthread.php?t=1416718
John,
To flash a stock ROM you need a stock recovery.
To flash a custom ROM you need StreakMod Recovery.
Even if the files are not altered any ROM packaged as a zip is a "custom" rom.
To get you started (and get your Streak working) you should flash a stock ROM. I recommend BB 351 as the most stable stock ROM.
Put the pkg file for 351 on the root of your SD card named update.pkg
Use fastboot to flash the 351 recovery,
Use fastboot reboot to reboot the Streak and as it reboots hold both volume buttons to get to recovery
Select option 2 to install 351.
If you decide to use a different stock ROM the instructions are the same, just use the correct files.
If you really want Gingerbread then flash the latest stock GB ROM and then install the DSC version of GB. See the DSC thread in the development section for info.
I've been looking for a downloadable "BB 351" since you posted - cannot locate it. I found the base 351 zipped file, but not the "pkg". Any hints?
Also, when I first attempted that "407 - base_v1.zip" installation, I used clockworkmod, named the base_v1.zip to "Update.zip", and it worked to a small degree. After confirming that the installation was successful, I rebooted the Streak, and after 3 minutes I saw a "O" logo with "elloh" beneath it. Unfortunately it never entered into a "home page" - but rather the Streak reverted to the Dell logo, and that was that.
You might try the links in my signature to find what you need - the wiki is a good place to start.
Edit: the reason you had no success with the zip you flashed is because a ROM flashed from a zip is incomplete. That is why you need to flash the stock rom it is based on first. The ROMs packaged as zips do not install some needed system files, that is why you see instructions to install those first.
You have more reading to do before you understand the process of updating/modding the Streak.
I did locate the BB 351 package just seconds after posting that I could not find it. I've now bookmarked it. I continue to have not-so-good luck.
On the "407" Base_v1.zip installation, suggested by the first poster, the installation went further than any other attempt. I actually saw the "O" with "olleh" beneath it onscreen for a few minutes, but then, poof, it was gone - replaced by the Dell logo. If I am successful, will the Dell logo still be displayed, or will the "O" or some other logo replace the Dell logo upon a successful installation?
After downloading the 351 package and corresponding recovery.img, I reached one point where the status indicator bar reached 100%, but then everything apparently froze. Rather than panic and quickly yank the battery, I left it alone for 15 more minutes. There was no change, so I removed the battery and started again. Now, after many more attempts, I see the "Verifying Update", and then the Streak reboots. Each time I leave it for several minutes in hope that it is installing the Update in the background. But nothing happens. Just reboot after reboot - with Dell logo.
I know that I am very close, so I am not giving up. But I am worn out - PLUS the Super Bowl is starting right now. I'll pick this up again tomorrow night.
If anyone has any ideas or suggestions, please post - remembering that I'm a newbie and may not understand your technical slang, although I am a Telecom Engineer now working exclusively with VoIP, so I am technical. It's been fun tinkering so far, but it would be nice to reach a happy ending! Cheers.
John - North Texas
Thanks for that tip, Marvin02. I do understand. Applying the base was step 1. I did not perform step 2: applying the update. Without the update, the base could not "launch". Unfortunately today I have returned to the wonderful world of IP Telephony, Gateways, UC, and Linux. At this moment I have no battery for the Streak, as I gave it to my daughter during the Christmas break. Yesterday I was using my son's battery, but he returned to college yesterday evening. I ordered a battery last Thursday, and it is due to arrive today. I was shocked to discover that the Streak cannot power on with only external power - it requires a battery.
I also know that I have merely scratched the surface of this technology. After I recover this Streak, I plan to install a ROM Manager, perform a backup, then experiment with other mods. But right now the mission is to revive the Streak paperweight.
Thanks!
ROM Manager and similar apps don't play well with the Streak. Don't use them.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
When you tried to install BB 407 you were installing a gingerbread ROM.
BB351 is a Froyo ROM. There have been some reports of problems reverting from GB to Froyo.
I suggest that you use fastboot to flash:
The recovery for BB 351 or BB 360
amss.mbn
dsp1.mb1
Then reboot to recovery and try installing the update.pkg.
For some reason some Streaks need the baseband files flashed first before the Froyo ROM will install properly. This happened with my Streak when reverting from GB.
blackscreen after selecting option 2
When i select option 2 from the recovery screen it is just a black screen. is there a way to fix this?
upgrade to Longthorn 2.6 is the most one I like
I flash the ROM to Longthorn 2.6. Strictly follow up the step.
My Dell Streak 5 now faster than before, no Dell Stage respone error anymore.
flashing light also resolved (read the instruction in [ROM] Longthorn 2.6 topic.)
i was trying to update my dellstreak5 i was on dell offical rom 2.2.2 fyro
http://forum.xda-developers.com/showthread.php?t=1314898
i followed gudline 4 and and DSCv2.0-rel on my dell streak root of sd card
and entered into fastboot mode and run fastboot.bat from 'DSC_flashme2_2'
and then my phone reboot and i press both volume buttons and it keeps restarting and i pull the battry out.
and then press power and volume buttons together and enter into dell menu and follow the instruction and i started installing coustom rom
and after 1 min it got stuck and said "error >7 installation failed assert failed" and i did a reset from back of dell menu and guidline stated and now it give 3 lights and keeps on dell logo plzz help me !!!
error details
installing phonix kernel
assert failed: package_extract_file("boot.img"."/tmp/boot.img")
E: Error in /sdcard/dscv.2.0-rel.zip
(status 7 )
installation aborted
this is the error that this rom gives to me
Some additional information is needed. Let us know everything you did to get you to this point, including which recovery you installed.
help
Strephon Alkhalikoi said:
Some additional information is needed. Let us know everything you did to get you to this point, including which recovery you installed.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1314898
let me explain u what i did step by step
1) i downloaded http://www.littlemaruko.com/Nopteam/DSCv2.0-rel.zip
2) and then http://n0p.8bit.fm/streak/updDSCv2.3.zip
3) DSC ROM "flash me before installing" pack.
[email protected] (this link gives me DSC_flashme2_2 folder) above 3 links are in above thread i mentioned under dsc rom downloads
4) and put 2 zip files DSCv2.0-rel and updDSCv2.3 on the root of sd card which i get from step 1 & 2
5) and pull battret out and put it back in and go into fastboot mode then after 20 sec connect my dell streak5 to pc through usb and from DSC_flashme2_2 folder (which i get it from step 3) i run flash.cmd it makes my phone to reboot
6) i pull the battrey out and disconnect the usb cable
7) i enter into dell menu by holding both volume buttons and power button then go to update from zip on sd card select DSCv2.0-rel.zip and it start installing and at the end it gives error and then i move back on dell menu and factory reset it ..
and ends up f**king myself :'( help me plz im noob to andriod stuff its my first attempt to do a custom rom
help
Strephon Alkhalikoi said:
Some additional information is needed. Let us know everything you did to get you to this point, including which recovery you installed.
Click to expand...
Click to collapse
dont know about recovery..... i just did all thing which i writed in my above post .... nothing more than that ...!!!!
If you don't know which recovery you installed, it's highly likely you didn't install one at all. This would explain why you can't install the ROM.
You must be rooted and have a custom recovery installed in order to install a custom ROM.
Strephon Alkhalikoi said:
If you don't know which recovery you installed, it's highly likely you didn't install one at all. This would explain why you can't install the ROM.
You must be rooted and have a custom recovery installed in order to install a custom ROM.
Click to expand...
Click to collapse
@ Strephon Alkhalikoi
he skips the worst part of all.. installing 406 or 407 first...
@ asfandnasar
since you are a beginner, knowing the basic upgrade from froyo to gb is crucial... then the usage mastering part.. then once you are familiar with those of gb, you can then try to use custom rom...
not straight away and do the shortcut...
you need to try to use original stock rom of 406 or 407 first before attempting to install a custom rom you know... but you missed it big time... reallllly big time...
deysmacro said:
he skips the worst part of all.. installing 406 or 407 first...
Click to expand...
Click to collapse
Installing 407 isn't a requirement for either DSC ROM, especially since _n0p_ disabled the baseband check in the Phoenix kernel. In fact, both _n0p_ and I offer the 366 baseband for use with our respective versions of DSC as it works better than the 407 baseband.
However, the fact the OP is skipping steps is going to lead to disaster. He really needs to look at the various guides we have here and understand what he is doing, before he turns his device into a nice, shiny paperweight.
help
Strephon Alkhalikoi said:
Installing 407 isn't a requirement for either DSC ROM, especially since _n0p_ disabled the baseband check in the Phoenix kernel. In fact, both _n0p_ and I offer the 366 baseband for use with our respective versions of DSC as it works better than the 407 baseband.
However, the fact the OP is skipping steps is going to lead to disaster. He really needs to look at the various guides we have here and understand what he is doing, before he turns his device into a nice, shiny paperweight.
Click to expand...
Click to collapse
this is the guid i followed...... if i do a streakmod recovery on dellstreak 5 would i be able to install this rom by the following method
4.Guidelines for migrating from Stock Froyo ROMs.
Running a custom ROM has its advantages and disadvantage (you woid your warranty), advantages are many thou nandroid backups, speed , flexibility, root ability, imporved battery life, tweaks to make your Streak do more than you are used to, quick response from the devs for daily issues etc.
Custom ROMs dont come in .pkg format as do OTA from Dell, but custom ROMs do come in .zip files, which then need to be flashed (installed) into your Streak.To make this possible you need first to install a modified image called StreakMod which would make it possible for you to install DSC. StreakMod is provided also from DSC in the pack DSC_flashme2.zip provided by (_n0p_).
Download the DSC_flashme2.zip provided by (_n0p_) All you need is working Windows installation (32bit versions are tested) and the latest drivers form Dell installed on the PC.
You need to download the main DSC ROM only form the links provided on the first post of DSC in XDA thread, copy it on the root of your SDcard where they can be easily accesed, or you can open a folder called DSC, and you can put there all the zip files from DSC, but remmember the place , as you will need to find those files later from StreakMod menu.
You need to extract the content of the DSC_flashme2.zip file on any folder you like or the default folder offered by the system, DSC_flashme , but be sure to be easily accesed, you can remove the folder to any place you like after the flashing process,
Now be sure you have charged your streak to 100% before you start installing DSC. DO NOT connect your Streak with the PC using the usb connector yet. Power your streak on and immedialty press the camera button, you will see a white screen, this is called the FASTBOOT mode "Wait for SD detect...." then you will see "FastBoot" tap on it and the streak will enter the FastBoot-Mode , you will see "Wait for USB FastBoot detect ...." wait 20 seconds then plug your usb connector to the mobile and after some seconds you will see "FASTBOOT_MODE", now you are ready to turn to your PC again and .....
After the folder is in place, locate the flash.bat and double click on it, a windows DOS terminal will open, follow the instructions there and reboot immediatly after you see the Dell logo within seconds you need to press and keep pressed both volume butons on the side of and then you will have access to Dell menu, select the second option by using the Volume buttons to go up and down the menu, once the second choice "upgrade...." press the camera button and wait several seconds, then a Dell logo with a triangle will appear, that is the StreakMod menu, try navigating the menu up and down with the volume buttons, and once second choice there " update using zip" is highlighted, press the camera button , then you will go to a another menu , where using the same volume buttons , you can navigate thru to find the place where you uploaded the DSC zip file , then once highlaghted press the camara button again and you will see the DSC_script doing its job, once finished , you need to press back button, and go back to the first menu where you select reboot. Once streak is rebooting agian keep your fingers press on both volume buttons, where you will see the Dell menu, now chose the first option, factory reset,streak will reboot by itself, let it reboot , you will see Dell logo, and then the DSC boot animation, wait now patience, if you have done all the above , nothing can go wrong, wait a little , then wait some more , bcs a lot of files is being genearated for first time, etc so this process can take some time, 15 minutes, if you have seen the DSC boot animation, it means everything is ok, otherwise you need to repeat the process again.
Ok, so after installing StreakMod through the flashme pack did you immediately reboot into StreakMod or did you let the Streak boot normally? If you let it boot normally, you wiped out StreakMod. If you didn't, the copy of DSC you downloaded could have been corrupted in the transmission. In that case you'll need to download it again.
help
Strephon Alkhalikoi said:
Ok, so after installing StreakMod through the flashme pack did you immediately reboot into StreakMod or did you let the Streak boot normally? If you let it boot normally, you wiped out StreakMod. If you didn't, the copy of DSC you downloaded could have been corrupted in the transmission. In that case you'll need to download it again.
Click to expand...
Click to collapse
i just run flash.cmd from DSC_flashme2_2 folder
http://www.4shared.com/photo/xk2wHzjH/help_222.html ( in this picture u could see what i did i write a note and show files as well
http://www.4shared.com/photo/h4hMBKUp/help.html(in this picture u can see the links where i downloaded all that files correct me if im nt downloading it from right place
no need to pull the battery after flash me2
Sent from my Dell Streak using xda premium
As I expected, you're having no success with this because you aren't following the instructions given when you run the flash.cmd file in the flashme pack. As a result, StreakMod recovery is not being installed and thus you're still on the stock recovery. _n0p_ and StreakOwner have made this as simple as possible by telling you exactly what to do in order to get this done. If you cannot follow those instructions, then do not attempt to install a custom ROM at this time. You'll turn your device into a very expensive paperweight.
One piece of advice I will provide you: look for the thread in the development section titled "Everything you always wanted to know about the Streak but were too busy bricking it" and start reading the information found at each link within it. It covers basic information every Streak owner needs to know; information not covered in the brief instructions given in the flash.cmd file in the flashme pack. Once you read those links, then attempt to install the ROM.
EDIT: In the future, embed your images onto XDA's servers, rather than using 4shared. 4shared requires registration, and I could not see your images until I had logged in to my account there.
done
Aaryana said:
no need to pull the battery after flash me2
Sent from my Dell Streak using xda premium
Click to expand...
Click to collapse
first time when i flash it.... it stuck on dell logo and not going into dell menu and then i pull battry out .... now i did it and sucessfully entered into the dell menu and done i installed the rom no error occured ..... but im doing this costom rom because of random reboot and this problem remain same.... but i done it
thankx for helping guys im really gr8full .... if anyone of u know how to fix this random reboot thing....
done but still getting random reboot
Strephon Alkhalikoi said:
As I expected, you're having no success with this because you aren't following the instructions given when you run the flash.cmd file in the flashme pack. As a result, StreakMod recovery is not being installed and thus you're still on the stock recovery. _n0p_ and StreakOwner have made this as simple as possible by telling you exactly what to do in order to get this done. If you cannot follow those instructions, then do not attempt to install a custom ROM at this time. You'll turn your device into a very expensive paperweight.
One piece of advice I will provide you: look for the thread in the development section titled "Everything you always wanted to know about the Streak but were too busy bricking it" and start reading the information found at each link within it. It covers basic information every Streak owner needs to know; information not covered in the brief instructions given in the flash.cmd file in the flashme pack. Once you read those links, then attempt to install the ROM.
EDIT: In the future, embed your images onto XDA's servers, rather than using 4shared. 4shared requires registration, and I could not see your images until I had logged in to my account there.
Click to expand...
Click to collapse
thankx
after ur last comment i tried it again ..... and i finaly done it ... i will read that thread too.... but i was doing that rom bcz i read in post its the most stable rom ... but no luck its like fyro 2.2 ... do u know how to fix that random reboot thing
thankx for ur help again u guys r awsome
Give it time to stablize. I find on a fresh installation of my version of the ROM I will have random spontaneous reboots for a few days and then they almost completely disappear. I say "almost completely" because on very rare occasions I will get one when I least expect it.
Make sure you have done both wipes as instructed in the DSC instructions.
thanks
Strephon Alkhalikoi said:
Give it time to stablize. I find on a fresh installation of my version of the ROM I will have random spontaneous reboots for a few days and then they almost completely disappear. I say "almost completely" because on very rare occasions I will get one when I least expect it.
Make sure you have done both wipes as instructed in the DSC instructions.
Click to expand...
Click to collapse
yup i did both wipes and premisses fix as well .... hope so it will get stable ... thanks for helping
help
Strephon Alkhalikoi said:
Give it time to stablize. I find on a fresh installation of my version of the ROM I will have random spontaneous reboots for a few days and then they almost completely disappear. I say "almost completely" because on very rare occasions I will get one when I least expect it.
Make sure you have done both wipes as instructed in the DSC instructions.
Click to expand...
Click to collapse
it aint getting stable .... and this problem is getting worse day by day .....
when it is in my pocket it automatically restart ... and stuck on dell logo and become hot like hell .... easy to make me feel on my leg .....
i can just listen to music and radio thats all i can do with my dell streak without having a restart any suggestion ???
None, unfortunately. _n0p_ hasn't been able to pin down the cause.