I am on an AT&T stock streak I just bought (1.6), and EVERY SINGLE recovery I've flashed, after I hold the power and volume buttons, and select the second option, I just a black screen that is lit up. No buttons do anything, and it just sits there. as I said, it's EVERY recovery. The old clockwork, the new clockwork, the fixed clockwork on the forums, the alternate fixed clockwork, streakmod, and streakmod beta.
Well, the old clock work (1.5.4 or something) just goes nuts with the LEDs on the buttons and when I select something the screen just turns black. I know I'm doing everything right, when I install a recovery with fastboot, it says successful and everything. I just can't figure it out. Please, please help me.
Bump, I'm about ready to just take it back because 1.6 sucks so bad.
You can not just flash roms on your stock 1.6 streak, you need to change its buil first to 305, or 318, 319 or 322 because those roms were not meant for your phones build. Try following the instructions on streakdroid.com there is a guide there that will walk you thru.
Sent from my Dell Streak using XDA App
I just got a Streak a few days ago as well. It isn't super easy to figure out what to do with this phone, since most of the information is on other sites, whereas with other android phones most of the info is right here on XDA. Basically, all you need to do is install drivers on your PC, then download and flash using QDL Tool. That will put you at 2.2, and from there you can install whatever you want, including different recoveries.
Check out streakdroid.com for tutorials.
Sent from my Dell Streak using XDA App
There are a few upgrade/downgrade/recovery/rom threads in the development section. with decent instructions.
Hello,
I was wondering if someone can help me with an issue i'm having.
I am trying to restore my ORIGINAL dell streak 1.6 to build(6601), so I can do the update for the official 2.2 release.
I did the O2 update that was on the support forum by accident and has put my dell streak into a reboot fit. I've tried many things to get my streak working but no cigar. I got it working with the QDL tool but still has some issues with randomly freezing or rebooting on me.
When I try to downgrade it from 2.2 to 2.1 and then 1.6 O2 and then back 1.6 (6601), I try to follow the steps but when I run the update.pkg from sd it reboots during the update.
Please help!
e.g.
I believe i'm also on a baseband 00 right now..
Android System recovery utility GAUSB1A110421
See my post about the 2.2update a few below this one.
Sent from my Dell Streak using XDA App
Hey everyone - I just got a new Rogers Dell Streak. Like a good noob, I followed a guide on how to upgrade the rogers build 7921 and I'm now at Android 2.2, Build 10688. Everything seems to work OK so far, but the home, menu and back buttons flash every 1 minute exactly. Doesn't seem to matter what I'm doing, it's almost as if it's a notification of some kind. They do not flash while the screen is off (sleep).
I followed a few different guides and I think this may be the issue but I thought I'd ask first. the first thing I did was use QDL Repair Tool to upgrade to a dell release of 2.2 (I guess)... the last thing I did was follow the StreakDroid Rom installation instructions using StreakMod Recovery, amss.mbn, and then tried to install Streakdroid 1.6.1, but it wouldn't boot properly, so restored 2.2 using nandroid.
I've done some searches but couldn't really find an answer to the issue I'm having.
If anyone could give me the step required to correctly upgrade the Rogers version of Dell Streak I'd really appreciate it. Ideally I'd like to get to a stable version of 2.2 (DJ_Steve's preferably, but I would be OK to go to the new release from Dell if it would work right).
thanks everyone!
-Steve
Never mind everyone. I figured it out. I reverted back to a stock Rom and recovery and started all over. I'm now using cw recovery and Dj_steves 1.8.1 Rom.
Everything seems to be working great!
Cheers!
STEVE
Sent from my Dell Streak using XDA App
I have installed ROM Manager 4.3.3.0.
When I click flash clockworkmod recovery. It downloads and reports a successful install.
If I click reboot into recovery, it reboots but comes right back into the normal dell stage UI. If I select Backup Current ROM. It displays the backup name, I click OK. It pauses for a couple seconds then reboots and returns to the dell Stage UI.
If I hold the volume buttons and the power button I get the Dell recovery.
I have the 1.9.1 zip file on the SD card as well as the install.txt file. So I also tried the install ROM from SD Card option in ROM Manager. It reboots but returns to the Dell Stage UI.
So...
How do I get 1.9.1 installed?
davidbec92 said:
I have installed ROM Manager 4.3.3.0.
. . .
Click to expand...
Click to collapse
It has been reported that ROM Manager does not work as expected with the Streak.
Some reading:
Streak Wiki at xda-developers.com – includes DL links for ROMS and a ROM reference, lots of good info. Start here!
Radimus’s Universal Guide to Flashing a ROM – MUST READ if you want to flash a ROM or upgrade
Beginner’s Guide to Streakdroid – put together by Kohawk09. This was last updated for version 1.8x, but is still a useful and informative read.
Flashing Guide by TheManii at XDA Streak Wiki
Dell Streak – The Complete Guide – thread at XDA that includes a somewhat dated PDF with Streak hacking basics. Read the thread for follow-up! Written prior to Android 2.2 for the Streak.
Modding your Streak – where to start? – my take on Streak Moddding
Using StreakMod Recovery
Custom Recovery – Prevent Overwriting on Dell Streak
I suggest you read and follow the install instructions for 1.9.1 in the opening post of the 1.9.1 release thread.
Thanks for the response.
I am using dell streak 2.2.2 with streakdroid 1.9.1
After using it for 3-4 days everything started force closing.
For eg.-
process com.google.process.gapps
process com.android.mms
process com.google.android.gm
process com.cooliris.media
etc etc....
I factory reset my phone nd den tried it again but again the same problem after 2 days..And a lot of other downloaded apps also start force closing. I am fed up of factory resetting my phone again and again.
Thnx..
Hello. I'm a 55 year-old newbie to the wonderful world of Android, courtesy of my kid's continuously-rebooting Dell Streak 5 (AT&T, USA). It all started with the Froyo 2.2 OTA update in late 2011. The Streak would not boot after that update completed (WiFi - FIOS). We called Dell, and they advised that we Factory Reset it. That worked, and we thought all was well. Now several months later and 2000 factory resets later, my kid requested an iPhone for Christmas, and I re-claimed the Streak. I called Dell last week, and of course they wasted several hours of my time, ultimately telling me that my phone was out of warranty, but that for $249 I could buy a new phone. I advised several reps and a supervisor that Dell's OTA 2.2 update caused the problem, and that I should not be charged for any resolution to that problem. End of that story - here I am, after spending all of Saturday and most of Sunday attempting to downgrade back to 1.6. Here's what I have done:
I used SuperOneClick and successfully rooted the phone
I have used many recovery mods, ALL of which seem to lead to a black screen after selecting option 2. However, the Clockworkmod "alternate" recovery method did work. I downloaded a 4399 stock recovery zipped file, copied it to the Streak's SD card, then renamed the entire zipped file to "Update.zip". Then I used FastBoot, and flashed the Clockworkmod alternate recovery "recovery.alt.img" to the Streak. I used fastboot to reboot the Streak, then held the two Volume buttons, selected Option 2, and made my way through the awkward menu - but ultimately I was able to install "Update.zip" successfully. Upon the reboot, I am stuck with the Dell logo. I have tried factory resetting at this point, starting again from "scratch", only to return to the same old story: stuck at Dell logo. I read somewhere that it could take 10 minutes for the Streak to boot, but I have waited for 30 minutes plus.
An hour ago I was too frustrated to continue trying to downgrade to 1.6, so I read this thread: http://forum.xda-developers.com/showthread.php?t=1334487. I used the clockwork 3.0.1.9 recovery method, and attempted to upgrade to 2.3.?. This was not an "alternate" method (which had not worked in two days), but after flashing the recovery.img to the Streak, and using the 2.3.? "Update.pkg" on the SD card, the Streak did begin to verify the package - then it started the update, then - REBOOT. The first time this happened, I waited for 30 minutes, thinking that the upgrade was happening in the background while displaying the Dell logo, as Windows updates sometimes do. But then I yanked the battery, and started that process again. The next time and every subsequent attempt to perform this upgrade results in a reboot as the "verifying package" is occurring.
At this point I feel as though I am spinning my wheels, so I'm putting out an All Points Bulletin for some advice and/or help.
Thanks in advance! John in Dallas
John, have you tried with another update.pkg? The thread you link to is from sreak 7, could that be the issue? If I was you I would try one of the 407 deodexed ROMS from http://forum.xda-developers.com/showthread.php?t=1376896
I did not realize that thread was for the Streak 7. Thanks for pointing that out. I have tried several others, but nothing like what you have provided.
Being new to this technology, I have not yet quite grasped all the terminology and theory. Can I mix and match the recovery images with the Update packages? For example, where "TheManii" states that StreakMod must be pre-installed, then he provides a (407) base_v1.zip , is it OK for me to use the Clockworkmod recovery.alt.img (which has seemingly worked well on my Streak) with his base_v1.zip? Or MUST I use the StreakMod recovery image in conjunction with his base_v1.zip?
I assume that I am supposed to follow the same procedure as before:
- Save the base_v1.zip to the Streak's SD card - renamed to "Update.zip"
- use "fastboot mode" to transfer the recovery.img from PC to the Streak
- boot the Streak into recovery mode, select option 2
- then select the recovery option to load from the "Update.zip" on the SD
How long should it take to install the base and the update?
I understand that the "base" is just that, and I will also need to flash the "update", but the other "bloat" stuff is optional.
I will give this a try shortly - then re-post. Thank you!
I am not the expert here, but from what I've gathered you need the correct recovery image only when you are flashing an official update, since those updates come as encrypted ".pkg" files. I think (please check also the threads on flashing modified ROMs) that ROMs that end on ".zip" are not encrypted and don't need a special recovery file. I hope someone with actual experience on this can confirm if I am correct.
Edit: I just notice that the thread I linked to specifies that installing the matching "pkg" is a prerequisite to installing the "zip" -- this is admittedly more complex than I thought it would be. You are probably better off just installing one of the stock ROMs first just to recover your Streak -- I had recently updated to the 407 (Korean) Gingerbread ROM and like it very much; there are instructions of puttiing it here: http://forum.xda-developers.com/showthread.php?t=1416718
John,
To flash a stock ROM you need a stock recovery.
To flash a custom ROM you need StreakMod Recovery.
Even if the files are not altered any ROM packaged as a zip is a "custom" rom.
To get you started (and get your Streak working) you should flash a stock ROM. I recommend BB 351 as the most stable stock ROM.
Put the pkg file for 351 on the root of your SD card named update.pkg
Use fastboot to flash the 351 recovery,
Use fastboot reboot to reboot the Streak and as it reboots hold both volume buttons to get to recovery
Select option 2 to install 351.
If you decide to use a different stock ROM the instructions are the same, just use the correct files.
If you really want Gingerbread then flash the latest stock GB ROM and then install the DSC version of GB. See the DSC thread in the development section for info.
I've been looking for a downloadable "BB 351" since you posted - cannot locate it. I found the base 351 zipped file, but not the "pkg". Any hints?
Also, when I first attempted that "407 - base_v1.zip" installation, I used clockworkmod, named the base_v1.zip to "Update.zip", and it worked to a small degree. After confirming that the installation was successful, I rebooted the Streak, and after 3 minutes I saw a "O" logo with "elloh" beneath it. Unfortunately it never entered into a "home page" - but rather the Streak reverted to the Dell logo, and that was that.
You might try the links in my signature to find what you need - the wiki is a good place to start.
Edit: the reason you had no success with the zip you flashed is because a ROM flashed from a zip is incomplete. That is why you need to flash the stock rom it is based on first. The ROMs packaged as zips do not install some needed system files, that is why you see instructions to install those first.
You have more reading to do before you understand the process of updating/modding the Streak.
I did locate the BB 351 package just seconds after posting that I could not find it. I've now bookmarked it. I continue to have not-so-good luck.
On the "407" Base_v1.zip installation, suggested by the first poster, the installation went further than any other attempt. I actually saw the "O" with "olleh" beneath it onscreen for a few minutes, but then, poof, it was gone - replaced by the Dell logo. If I am successful, will the Dell logo still be displayed, or will the "O" or some other logo replace the Dell logo upon a successful installation?
After downloading the 351 package and corresponding recovery.img, I reached one point where the status indicator bar reached 100%, but then everything apparently froze. Rather than panic and quickly yank the battery, I left it alone for 15 more minutes. There was no change, so I removed the battery and started again. Now, after many more attempts, I see the "Verifying Update", and then the Streak reboots. Each time I leave it for several minutes in hope that it is installing the Update in the background. But nothing happens. Just reboot after reboot - with Dell logo.
I know that I am very close, so I am not giving up. But I am worn out - PLUS the Super Bowl is starting right now. I'll pick this up again tomorrow night.
If anyone has any ideas or suggestions, please post - remembering that I'm a newbie and may not understand your technical slang, although I am a Telecom Engineer now working exclusively with VoIP, so I am technical. It's been fun tinkering so far, but it would be nice to reach a happy ending! Cheers.
John - North Texas
Thanks for that tip, Marvin02. I do understand. Applying the base was step 1. I did not perform step 2: applying the update. Without the update, the base could not "launch". Unfortunately today I have returned to the wonderful world of IP Telephony, Gateways, UC, and Linux. At this moment I have no battery for the Streak, as I gave it to my daughter during the Christmas break. Yesterday I was using my son's battery, but he returned to college yesterday evening. I ordered a battery last Thursday, and it is due to arrive today. I was shocked to discover that the Streak cannot power on with only external power - it requires a battery.
I also know that I have merely scratched the surface of this technology. After I recover this Streak, I plan to install a ROM Manager, perform a backup, then experiment with other mods. But right now the mission is to revive the Streak paperweight.
Thanks!
ROM Manager and similar apps don't play well with the Streak. Don't use them.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
When you tried to install BB 407 you were installing a gingerbread ROM.
BB351 is a Froyo ROM. There have been some reports of problems reverting from GB to Froyo.
I suggest that you use fastboot to flash:
The recovery for BB 351 or BB 360
amss.mbn
dsp1.mb1
Then reboot to recovery and try installing the update.pkg.
For some reason some Streaks need the baseband files flashed first before the Froyo ROM will install properly. This happened with my Streak when reverting from GB.
blackscreen after selecting option 2
When i select option 2 from the recovery screen it is just a black screen. is there a way to fix this?
upgrade to Longthorn 2.6 is the most one I like
I flash the ROM to Longthorn 2.6. Strictly follow up the step.
My Dell Streak 5 now faster than before, no Dell Stage respone error anymore.
flashing light also resolved (read the instruction in [ROM] Longthorn 2.6 topic.)