hello..i'm new here and i tried using flashtool to root my phone to install wolf's 2.3 rom
however once i downgraded my phone using flash , it got stuck on the sony ericsson logo as was said on the page...but when i connect it back on the vibration , the phone is never recognised by the flashtool and busybox doesnt get installed..the phone has stopped working and is always stuck on the logo..please help..
i cant even flash anything into my phone as even when i hold the back key and plug the usb in , nothing happens..
nipun1989 said:
hello..i'm new here and i tried using flashtool to root my phone to install wolf's 2.3 rom
however once i downgraded my phone using flash , it got stuck on the sony ericsson logo as was said on the page...but when i connect it back on the vibration , the phone is never recognised by the flashtool and busybox doesnt get installed..the phone has stopped working and is always stuck on the logo..please help..
i cant even flash anything into my phone as even when i hold the back key and plug the usb in , nothing happens..
Click to expand...
Click to collapse
Please answer this question, what the heck did you downgrade, I hope you just downgraded the kernal.
What method of rooting did you use?
But first, what is your phone's:
firmware: 2.1 or 2.3
baseband
do you have xrecovery
If you would like help, I and others are willing to help you. Just post again and I will post links of the rooting method and guides to flashtool.
It happened to me... I was trying to install Jerpelea's latest 2.3.5, and suddenly my phone keeps rebooting from SE logo.. I can go into xrecovery, but when I try to recover a backup, it says it can't mount the sdcard...
What can i do?
Is my phone ruined??
Tks..
Have you installed latest SE adb driver?
Unplug your battery about 3 minutes then plug it again, use flashtool to flash 2.1 firmware, then connect it and press back button till green light appear, let it alone till finished.
Root your 2.1 fw, install recovery, and simply flash wolf 2.3 ROM, unplug your battery, plug it again and flash baseband 71.
Now your phone should be boot properly.
You almost cant break your X10 by flashing anything, cause bootloader is locked.
Sent from my SO-01C using XDA App
daniel_pnc said:
It happened to me... I was trying to install Jerpelea's latest 2.3.5, and suddenly my phone keeps rebooting from SE logo.. I can go into xrecovery, but when I try to recover a backup, it says it can't mount the sdcard...
What can i do?
Is my phone ruined??
Tks..
Click to expand...
Click to collapse
You cant ruin it mate.
Just install your recovery again, try with apk.
I think you have old recovery, cause this problem appear when gb just released, and now fixed.
You can find topic about it on X10 android development forums, Z already fixed it.
Sent from my SO-01C using XDA App
Ok, but the problem is: I can't start the phone, and the sdcard doesn't mount properly so I can recover a backup....
How can I install de recovery again without starting the phone?
You're right, I had the old recovery installed...
EDIT: And now I cant even go into recovery... It's fully stuck on SE logo... Damn!
Turn phone off. Boot pc companion. Goto update service. Click update. Says no phone found. Click repair option. Follow steps on screen. It will flash latest SE firmware. Root. Install recovery. Restore your backup on your now mountable sd card. Done you can't break this phone, can always restore through pc companion.
Sent from my X10i using XDA App
daniel_pnc said:
Ok, but the problem is: I can't start the phone, and the sdcard doesn't mount properly so I can recover a backup....
How can I install de recovery again without starting the phone?
You're right, I had the old recovery installed...
EDIT: And now I cant even go into recovery... It's fully stuck on SE logo... Damn!
Click to expand...
Click to collapse
Flash stock firmware from flashtool, if you dont know about how to use flashtool.
Just go to x10 android development forum, find thread about flashtool by androxyde.
Dont be so worry about your phone, you cant break it with flashing ROM or kernel.
Sent from my SO-01C using XDA App
daniel_pnc said:
It happened to me... I was trying to install Jerpelea's latest 2.3.5, and suddenly my phone keeps rebooting from SE logo.. I can go into xrecovery, but when I try to recover a backup, it says it can't mount the sdcard...
What can i do?
Is my phone ruined??
Tks..
Click to expand...
Click to collapse
no buddy i've been through tis 2 times...first time formatted system in xrecovery(NEVER DO THAT) the second when i lost root access with old xrecovery and buggy custom rom
JUST FLASH STOCK 2.3.3 WITH FLASHTOOL
download .zip from http://forum.xda-developers.com/showthread.php?t=1147970
then create ftf bundle and flash it here http://forum.xda-developers.com/showthread.php?t=920746
also keep it in your pc for further use
Related
I've installed a custom 2.2 rom to my X10, but I wanted to restore my phone to the standard 2.1 rom because of issues I had to restore my backup files.
Flashing with SEUS or PCC didn't work, so I thought I'd try to remove the custom 2.2 rom with Xrecovery. I selected wipe system from the Xrecovery menu. That didn't went well..
My phone doesn't boot anymore, it's getting stuck when the white Sony Ericcson appears on the display.
I already tried to flash my phone with SEUS and PCC, but I get the message I already have the newest software installed.
Flashing with Flashtool did work, but then I have to reboot my phone to turn on debugging/ unknown sources. And that still doesn't work.
Somebody can help me with this please?
Hook up to SEUS and when it says you already have the latest software, it also gives you the choice of going ahead and (re)installing it anyway. Do that, and that should take care of the problems. If you don't see that option, you should try downloading the latest version of SEUS, installing it, and trying again.
Since you did a full wipe you've lost xRecovery too, so SEUS is your best bet IMO.
I have SEUS Version: 2.11.1.9
It doesn't work, same message. I don't see an option to install it anyway..
niessam said:
I have SEUS Version: 2.11.1.9
It doesn't work, same message. I don't see an option to install it anyway..
Click to expand...
Click to collapse
To flash with Bynary's flash tool you don't need to be on usb debugging mode... Just put your cellphone on flash mode...
press the back key while you insert the usb cable and then flash whatever firmware you want...
Sent from my X10i using XDA App
recommendation is 2.1.A.0.435 because of MT & stability.
my x10i stuck at the sony ericsson screen and nvr cant go into the OS... the xrecovery cant mount the sdcard..
is there any method can solve this kind of problems ?
What have you done ?
Plz give us more information so that we can help you.
just use flashtool flash back to 2.1 and then root + install xrecovery
done!
hey repair using pc suite..,
i wan to flash the rom bak to 2.1 by using the xrecovery backup. But after i restored img, then i reboot the phone and then stuck at the sony ericsson screen. it nvr goes into the OS. and i tried to use flashtool to flash again. but the software cant detect my phone anymore. so i cant repair my phone with pc suit or flash tools at all.. now even cant go into the xrecovery >_<
nickymy said:
i wan to flash the rom bak to 2.1 by using the xrecovery backup. But after i restored img, then i reboot the phone and then stuck at the sony ericsson screen. it nvr goes into the OS. and i tried to use flashtool to flash again. but the software cant detect my phone anymore. so i cant repair my phone with pc suit or flash tools at all.. now even cant go into the xrecovery >_<
Click to expand...
Click to collapse
Well,you flash the rom back to 2.1 by using the xRecovery backup and you should flash .67 baseband after the backup also.
You did not flash the .67 BB so it stuck at SE screen.
Please try to install the usb driver to make flashtool work again.
i just accidently went on xrecovery to change my rom for a theme (i didnt know it was a theme) and once it rebooted, it just stays on the se boot logo and i tried using superoneclick-shell root then flashtool but superone click doesnt respond after 'waiting for device' comes on. so im kinda stuckk here :/ ?
Use flashtool to flash back to 2.3.3. There are guides everywhere.
Sent from my X10i using XDA Premium App
It's basically got the bootloader coming up but the system isn't there. Flashing it with Flashtool will fix it.
xtrafile said:
It's basically got the bootloader coming up but the system isn't there. Flashing it with Flashtool will fix it.
Click to expand...
Click to collapse
Just flash the phone back to stock and reinstall back the custom rom there's alot of guides out there on how to do that.
Just flash the phone back to stock a reinstall xrecovery an reinstall the custom rom.
i tried flashing it with the flashtool but it says usb debugging must be on aswell as unknown sources - (but obviously you need to turn the phone on to do it) so im stuck again -.- ?
minipotts said:
i tried flashing it with the flashtool but it says usb debugging must be on aswell as unknown sources - (but obviously you need to turn the phone on to do it) so im stuck again -.- ?
Click to expand...
Click to collapse
Flashtool DOES NOT need USB debugging and unknown sources to flash firmwares. It only needs those to root etc...
Sent from my X10i using XDA Premium App
Can anyone tell me what im doing wrong after i kernel downgrade my phone gets stuck on SE Logo help please
x10iNick said:
Can anyone tell me what im doing wrong after i kernel downgrade my phone gets stuck on SE Logo help please
Click to expand...
Click to collapse
Before you downgraded, did you turn on debug mode? If not, then pull the battery, put it back in holding the back to go into flash mode and flash back the kernel upgrade, put debug mode on and then proceed to do the downgrade. When you downgrade, wait till the phone starts up, it will be stuck on SE logo but just click root on flash tool since it will still recognize the phone. When it's finished, do a battery pull, repeat what I told you before about entering flash mode and flash the kernel upgrade. Should boot fine after that, congrats, you're now rooted, you can then install xrecovery.
Thank you i will try that yes i have debug on what version of flashtool should i use ? i saw root before and finished the steps but xrecovery never became visible and i had it working before it said i was rooted but superuser wasnt there i will try now what you said to do thanks !
Its because you have to run the upgrade file afterwards before it will boot
Sent from my X10i using XDA Premium App
I have a rooted SE wt19i with CWM recovery installed and yesterday I wiped all the data, cache and system files to install Minimul Triumph ROM.
When I rebooted my phone it was stucked at the First Sony Ericsson screen and didnt boot into recovery. I have a Backup On My SD.
Please Help
have you tried flashing back to the original firmware using flashtool?
Yes i DId try but it doesnt even go to flash mode
Edit:I finally managed to go to flash mode. I flashed the firmware succesfully thanks kevin
First, I cannot find that kind of ROM for WT19i, could be wrong ROM to install. You can only install ROMs, that are built for your phone.
Second, you must have custom kernel to boot into custom ROM. Stock kernel only works with stock ROM. First install custom kernel(there's plenty of them in Development section, like X Kernel, Rage Kernel, bbooff's kernel etc) and then via CWM install custom ROM(install from sdcard).
Most custom kernels include CWM.
Please help me
I have brick my sony live with walkman, (Actually what happen)
i have a sony live with walkman, with rooted, Unclock bootloader (with test point method), and i install cm7.2 rom in that and the phone works fine, i want to try other roms for doing this i have wrongly deleted the system files using CMW.
After that my phone not start gives a bootloap on FXP logo, after that i flash stock (52) rom using flash tool. and all the things work fine my phone start normal. Then i rooted my live with walkman again and install cmw on that, after doing this i got a message to update stock rom to (62) latest sony software. i update over OTA and the update download sucessfully. then my phone switch off to install the updates. but when i switch on the phone then phone not starts, when i press power button then it show a green blinking lines, even charging is also not there, and when i connect my phone to usb then it shows phone connected in flashmode.
Please help me how i recover my WT19i
sorry for my bad english
Thanks in Advance
If it connects in flashmode just use pcseus to repair the phone or use flashtools to flash stock fw back on it
Rudjgaard said:
If it connects in flashmode just use pcseus to repair the phone or use flashtools to flash stock fw back on it
Click to expand...
Click to collapse
i dont know how to use pcseus and what is stock fw.
if stock is stock rom (52) ftf. Then i have flash 2 or 3 times. but my phone automatically connected in flashmood. and when i tried to on my phone by pressing Start button then Green Led Blink and nothing happens.
azim0106 said:
i dont know how to use pcseus and what is stock fw.
if stock is stock rom (52) ftf. Then i have flash 2 or 3 times. but my phone automatically connected in flashmood. and when i tried to on my phone by pressing Start button then Green Led Blink and nothing happens.
Click to expand...
Click to collapse
Unbrick it using the files given in the sticked thread by someguyfromhell
mihahn said:
Unbrick it using the files given in the sticked thread by someguyfromhell
Click to expand...
Click to collapse
i didn't find (Sticked thread by someguyfromhell) will u please give me the link of that thread.
i will be very thankfull to u
waiting for your reply
thanks in advance
http://forum.xda-developers.com/showthread.php?p=24136222
Sent from my SK17i using xda app-developers app