Ive been happily using shooter's custom rom on my evo 3d. however i have rs 1 and i want to upgrade to rs3
can anyone describe or point me in the right direction to do this upgrade? do i have to do a full wipe? or can i just apply the new rs3 like i did rs1?
Ive searched here on the forms and via google and did not find anything related.
thanks!
i hope you have thick skin .............
Ive searched here on the forms and via google and did not find anything related.
Click to expand...
Click to collapse
No. You did not.
great here we go..
Download superwipe from virus thread flash it. For rsl 3 you need to first flash rsl 2.1 them flash rsl 3 without wiping
Lastly this is a question wrong forum dude this belongs in evo q and a not development
Sent from my PG86100 using XDA App
i mean i see posts like this:
http://forum.xda-developers.com/showthread.php?t=502985
and
http://forum.xda-developers.com/showthread.php?t=1053877
by doing a search like this, but none of these address my question:
http://www.google.com/cse?q=upgrade...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
Why didn't you ask in the thread of the rom?
What part of THIS in the download links did you not see?
RLS2 Official= http://www.megaupload.com/?d=ASTSJ0BJ
RLS2.1 Official= http://www.multiupload.com/55TTHGV3ES
RLS3 Official= http://www.multiupload.com/1FSRM98PLL [Just Flash Over 2.1 And Wipe Dalvik And Cache]
Click to expand...
Click to collapse
That's just sad. Why would you search anywhere else except the thread itself?
To answer your question: No you cannot just flash RLS3 by itself. This is only an update to the RLS2.1 ...So flash RLS2.1 then wipe cache and dalvik and then flash the RLS3.
budroux said:
To answer your question: No you cannot just flash RLS3 by itself. This is only an update to the RLS2.1 ...So flash RLS2.1 then wipe cache and dalvik and then flash the RLS3.
Click to expand...
Click to collapse
Which it clearly states in the download section.
Related
Hi there!
As i have try to find info about downgrading ROM's with no success. (It's big forum indeed).
I have installed ICS XXLPH. Rooted and CWM-ed with Chainfire kernel.
If i want to install custom GB ROM's with CWM are there some precautions that has to be taken prior to go from ICS to GB?
Thanks a lot!
Brgds,
M.
You can just flash immediately from CWM with no problems, there are no actual precautions. However, you will need to wipe all of your data, cache and dalvik COMPLETELY before flashing because any ICS data will not be compatible with GB (otherwise, you'll just have non-stop crashing and force close issues)
Step 1 - use the search button
BigMrB said:
Step 1 - use the search button
Click to expand...
Click to collapse
I DID!!!! But haven't found what i was looking for ( Thanks!
Reboot into cwm, wipe everything (data, cache, dalvik), flash zip - rom and reboot.
Sent from my GT-I9100 using XDA App
So i guess no big deal to jump from ICS to GB. Thanks guys!
Brgds,
M.
mesnati said:
I DID!!!! But haven't found what i was looking for ( Thanks!
Click to expand...
Click to collapse
http://www.google.com/cse?q=downgra...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
So the answer is not in one of those threads
mesnati said:
So i guess no big deal to jump from ICS to GB. Thanks guys!
Brgds,
M.
Click to expand...
Click to collapse
You may need to change the bootloader .
jje
Use Odin and flash a rom(2.3.6) which have bootlader for example XWKK5.
Here is bootlader:
Hello
After I rooted my phone, I freezed a couple of programs, and got carried away. Now twlauncher is not working. I've tried factory reset. But that didn't work. Now I am stuck at a screen telling me twlauncher stopped working.
I cannot do anything. I am using the danish version of ICS. There are to many threads on how to flash ICS. I have no idea which one to trust, that works. So I would really appriciate it, if somebody could help me. I am kinda scared/freaking out.
Thanks.
Hey. Do not worry. Have you got CWM Recovery installed in your ROM? Go into recovery mode and clear both Cache Partition and Then go into Advanced and clear Dalvik Cache. If that does not work i recommend you flash the most stable rom which is Litening ROM. I am using it for nearly a year and it is the most trustable rom.. Also installation guide os very well provided on Litening ROM thread.
Sent from my GT-I9100 using xda premium
Here is a link for you
http://forum.xda-developers.com/showthread.php?t=1095274
Sent from my GT-I9100 using xda premium
Rikko97 said:
Hey. Do not worry. Have you got CWM Recovery installed in your ROM? Go into recovery mode and clear both Cache Partition and Then go into Advanced and clear Dalvik Cache. If that does not work i recommend you flash the most stable rom which is Litening ROM. I am using it for nearly a year and it is the most trustable rom.. Also installation guide os very well provided on Litening ROM thread.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I do not have CWM installed. I only rooted. I would love if you could help me install stock ICS
TheStigx said:
I do not have CWM installed. I only rooted. I would love if you could help me install stock ICS
Click to expand...
Click to collapse
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
ICS
http://forum.xda-developers.com/showthread.php?t=1544487
jje
TheStigx said:
I do not have CWM installed. I only rooted. I would love if you could help me install stock ICS
Click to expand...
Click to collapse
Come on, do the work yourself. 290 posts and you can't be bothered searching?! Use the FAQs and stickies, that's why they're there.
You've given no info as to how you managed to bork TW launcher either. "Got carried away"... "freeze a couple of programs"... Very helpful.
For future reference - always handy to have another launcher installed for emergencies.
B3311 said:
Come on, do the work yourself. 290 posts and you can't be bothered searching?! Use the FAQs and stickies, that's why they're there.
You've given no info as to how you managed to bork TW launcher either. "Got carried away"... "freeze a couple of programs"... Very helpful.
For future reference - always handy to have another launcher installed for emergencies.
Click to expand...
Click to collapse
I know, I know. I just, freaked out a bit. I did some research, and found the link I was searching for(http://forum.xda-developers.com/showthread.php?t=1075278)
But I have a hard time, finding the danish version of ICS..
But do you think cleaning cache and dalvik will help, as post 2 said ?
I just tried cleaning dalvik and cache partition, It didn't work.
Sorry posted by mistake
Sent from my GT-I9100 using Tapatalk 2 Beta-5
Install cwm recovery make a flash able zip of a launcher and flash it
Then you will have your language rom, booted
Sent from my GT-I9100 using Tapatalk 2 Beta-5
TheStigx said:
I know, I know. I just, freaked out a bit. I did some research, and found the link I was searching for(http://forum.xda-developers.com/showthread.php?t=1075278)
But I have a hard time, finding the danish version of ICS..
But do you think cleaning cache and dalvik will help, as post 2 said ?
Click to expand...
Click to collapse
Don't know if there's a specific Danish version - not even sure if there is an official ICS in Scandinavia yet, never use Kies (I'm in Norway). Scandinavian firmwares have NEE as a CSC code.
Try Check Fus to find the most recent dansk firmware, then samfirmware.com for downloads.
Lykke til.
B3311 said:
Don't know if there's a specific Danish version - not even sure if there is an official ICS in Scandinavia yet, never use Kies (I'm in Norway). Scandinavian firmwares have NEE as a CSC code.
Try Check Fus to find the most recent dansk firmware, then samfirmware.com for downloads.
Lykke til.
Click to expand...
Click to collapse
Jo tak, I found the file I needed, know When I wanted to download the Odin file, the link doesn't work
sahibunlimited said:
Install cwm recovery make a flash able zip of a launcher and flash it
Then you will have your language rom, booted
Sent from my GT-I9100 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I would love to know if you had that kind of file, because I sadly have no idea on how to do that.
TheStigx said:
Jo tak, I found the file I needed, know When I wanted to download the Odin file, the link doesn't work
Click to expand...
Click to collapse
View attachment Odin.zip
Here you go.
Edit - or did you mean the firmware file to be installed with Odin, not actually Odin itself?
If I were you, I'd worry about ICS later, and get stock GB flashed first - at least you'll have a working phone. Follow the guides jjegan linked you to.
B3311 said:
View attachment 978783
Here you go.
Edit - or did you mean the firmware file to be installed with Odin, not actually Odin itself?
If I were you, I'd worry about ICS later, and get stock GB flashed first - at least you'll have a working phone. Follow the guides jjegan linked you to.
Click to expand...
Click to collapse
Yes, I wanted the Odin file itself
I get what you mean buy doing the flashing GB. To be honest, I want it to be fixed as fast as possible, and with ICS.
I am gonna flash It now, and hope for the best. Again thank you very much for your help, I really appreciate it
No problem, let us know how it went.
B3311 said:
No problem, let us know how it went.
Click to expand...
Click to collapse
It went well! Twlauncher now works, like it should !
Now I need to download all the apps and setup, but that is nothing compared to I have a working phone
Thank you and everybody who helped me,
deleted
I don't understand your question/problem at all and I doubt I'm alone. Try and rephrase it. If you're unable, the rules allow you to post in another language (i.e. your native language), as long as you also include a translation to English. Doing this might give you better results.
if im correct he wanted to know why after wipe and flashing a new rom which i think is stock Gb he is not getting welcome screen / first setup screen, where you set time, region and language...
atifsh said:
if im correct he wanted to know why after wipe and flashing a new rom which i think is stock Gb he is not getting welcome screen / first setup screen, where you set time, region and language...
Click to expand...
Click to collapse
thanks and yes you are correct and also for ice cream roms
hamadazh said:
thanks and yes you are correct and also for ice cream roms
Click to expand...
Click to collapse
When you say you wipe before flashing, did you wipe data, cache, and dalvik?
Kaze105 said:
When you say you wipe before flashing, did you wipe data, cache, and dalvik?
Click to expand...
Click to collapse
yes and also format cache and system and data from Mounts and Storage but sorry this happens when i flash icecream roms only but working on GB
hamadazh said:
yes and also format cache and system and data from Mounts and Storage but sorry this happens when i flash icecream roms only but working on GB
Click to expand...
Click to collapse
What ics rom? Cm9
if thats the case you need to flash Google apps also.
atifsh said:
What ics rom? Cm9
if thats the case you need to flash Google apps also.
Click to expand...
Click to collapse
no i flash many roms like JPLPC and JHLP9 and XWLP7 and wanam rom
hamadazh said:
no i flash many roms like JPLPC and JHLP9 and XWLP7 and wanam rom
Click to expand...
Click to collapse
Flash Gapps after flashing a ROM.
Usually a gapps link is included on every OP page of a ROM thread if not built in the ROM.
P.S.
I almost had a heart attack reading your 1st post. Joke!
clifffhanger said:
Flash Gapps after flashing a ROM.
Usually a gapps link is included on every OP page of a ROM thread if not built in the ROM.
P.S.
I almost had a heart attack reading your 1st post. Joke!
Click to expand...
Click to collapse
ha ha ha ha sorry i could't explain my problem because my English not good but i am try to do my best sorry and thanks for help
I've looked through DNA Q&A as well as general Q&A but I couldn't seem to find the answer.
I'm running slimbean and saw that there was a recommendation to use a specific crpalmer kernel. I have downloaded the kernel and I saw its .zip so I may just flash it in my recover I'm assuming. Correct?
Also, what if I don't like it? Do I need to retain a copy of my current kernel, is it available here, or is it already in the ROM's zip? I looked at the ROM and kernel zip files and they both appear to have contents for boot.
Finally, is there an order to install the kernel? If my assumption of the ROM also having a kernel then i'm guessing I should install the kernel after the ROM?
Thanks
rockfreak101 said:
I've looked through DNA Q&A as well as general Q&A but I couldn't seem to find the answer.
I'm running slimbean and saw that there was a recommendation to use a specific crpalmer kernel. I have downloaded the kernel and I saw its .zip so I may just flash it in my recover I'm assuming. Correct?
Also, what if I don't like it? Do I need to retain a copy of my current kernel, is it available here, or is it already in the ROM's zip? I looked at the ROM and kernel zip files and they both appear to have contents for boot.
Finally, is there an order to install the kernel? If my assumption of the ROM also having a kernel then i'm guessing I should install the kernel after the ROM?
Thanks
Click to expand...
Click to collapse
im stalking you lol.
yes just flash it make sure its the AOSP one if you are running slimbean. if you are flashing a fresh rom, make sure you let the rom boot up first and settle before you flash a kernel (or anything else for that matter). you probably wont dislike crpalmers kernel, but in TWRP you can make a back up of just the /boot partition, not sure if you can in CMW though. you could also dirty flash the rom.
and if you have more questions, just keep asking them on the same thread. dont start a new one, its causes clutter. also you can quote people and it notifies them, so they know you responded.
[indiferenc] said:
im stalking you lol.
yes just flash it make sure its the AOSP one if you are running slimbean. if you are flashing a fresh rom, make sure you let the rom boot up first and settle before you flash a kernel (or anything else for that matter). you probably wont dislike crpalmers kernel, but in TWRP you can make a back up of just the /boot partition, not sure if you can in CMW though. you could also dirty flash the rom.
and if you have more questions, just keep asking them on the same thread. dont start a new one, its causes clutter. also you can quote people and it notifies them, so they know you responded.
Click to expand...
Click to collapse
Thanks. I will do that from now on. I might try twrp sometime.
Sent from my HTC6435LVW using Tapatalk 4 Beta
[indiferenc] said:
im stalking you lol.
yes just flash it make sure its the AOSP one if you are running slimbean. if you are flashing a fresh rom, make sure you let the rom boot up first and settle before you flash a kernel (or anything else for that matter). you probably wont dislike crpalmers kernel, but in TWRP you can make a back up of just the /boot partition, not sure if you can in CMW though. you could also dirty flash the rom.
and if you have more questions, just keep asking them on the same thread. dont start a new one, its causes clutter. also you can quote people and it notifies them, so they know you responded.
Click to expand...
Click to collapse
Well. I "soft bricked" my phone for lack of a better word. I used that kernel in the thread from slimbean and phone went black after flashing HTC screen twice...thank goodness for ADB reboot recovery. But I reinstalled back and all is well. Wish I could post in that exact forum.
Sent from my HTC6435LVW using Tapatalk 4 Beta
rockfreak101 said:
Well. I "soft bricked" my phone for lack of a better word. I used that kernel in the thread from slimbean and phone went black after flashing HTC screen twice...thank goodness for ADB reboot recovery. But I reinstalled back and all is well. Wish I could post in that exact forum.
Sent from my HTC6435LVW using Tapatalk 4 Beta
Click to expand...
Click to collapse
really? thats weird. did you wipe the dalvik cache after you installed the kernel? i dont use aosp or CMW, but it shouldnt be any different.
I did not wipe davlik cache. Apparently I should try that...I didn't know. Maybe I'll get up the courage again tomorrow.
Sent from my HTC6435LVW using Tapatalk 4 Beta
[indiferenc] said:
really? thats weird. did you wipe the dalvik cache after you installed the kernel? i dont use aosp or CMW, but it shouldnt be any different.
Click to expand...
Click to collapse
I think I'll re download the kernel too.
Sent from my HTC6435LVW using Tapatalk 4 Beta
rockfreak101 said:
I've looked through DNA Q&A as well as general Q&A but I couldn't seem to find the answer.
I'm running slimbean and saw that there was a recommendation to use a specific crpalmer kernel. I have downloaded the kernel and I saw its .zip so I may just flash it in my recover I'm assuming. Correct?
Also, what if I don't like it? Do I need to retain a copy of my current kernel, is it available here, or is it already in the ROM's zip? I looked at the ROM and kernel zip files and they both appear to have contents for boot.
Finally, is there an order to install the kernel? If my assumption of the ROM also having a kernel then i'm guessing I should install the kernel after the ROM?
Thanks
Click to expand...
Click to collapse
Hi,
Can u d/l the latest aosp kernel from crpalmer.
Chk 2nd post of my slimbean thread. It was not updated.
Below steps for installing kernel only ::
1. DL zip file
2. Wipe cache and dalvik cache
3. Flash zip file.
Make sure u flash ROM and gapps first. Let it boot up.
Then try with above mentioned steps for kernel
DNA | ⓣⓐⓟⓐⓣⓐⓛⓚ | TF300T
Thanks. I will try again tomorrow and provide feedback.
Sent from my HTC6435LVW using Tapatalk 4 Beta
amit_sen said:
Hi,
Can u d/l the latest aosp kernel from crpalmer.
Chk 2nd post of my slimbean thread. It was not updated.
Below steps for installing kernel only ::
1. DL zip file
2. Wipe cache and dalvik cache
3. Flash zip file.
Make sure u flash ROM and gapps first. Let it boot up.
Then try with above mentioned steps for kernel
DNA | ⓣⓐⓟⓐⓣⓐⓛⓚ | TF300T
Click to expand...
Click to collapse
[indiferenc] said:
really? thats weird. did you wipe the dalvik cache after you installed the kernel? i dont use aosp or CMW, but it shouldnt be any different.
Click to expand...
Click to collapse
Thanks to both of you. I checked the forum, followed the directions, and successfully installed the kernel.
I bricked my sgs2 i777 because of rom manager, i paid for fixing my phone and i want to flash Cyanogenmod but im afraid to brick it again, so i'd like to know, an easy way to install a rom without PC step by step please. Thanks
Best advice i have for ya is to do a lot more reading before trying to flash anything.
There is a lot of info here in the stickied threads, etc. And as well in the more up to date threads. U will have to do some searching in the q & a and general forums, but it shouldn't be to hard to find ur answers. But u need to be sure of what u r doin before u do it, so u don't end up with a messed up phone again. There are members here that constantly help, but i think it is best to help urself 1st and then ask ?s later if ya can't find an answer or resolve an issue.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Read about it but can't find anything
4-2ndtwin said:
Best advice i have for ya is to do a lot more reading before trying to flash anything.
There is a lot of info here in the stickied threads, etc. And as well in the more up to date threads. U will have to do some searching in the q & a and general forums, but it shouldn't be to hard to find ur answers. But u need to be sure of what u r doin before u do it, so u don't end up with a messed up phone again. There are members here that constantly help, but i think it is best to help urself 1st and then ask ?s later if ya can't find an answer or resolve an issue.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
I read about Cyanogenmod but i cant find a post about flashing a rom without rom manager or pc, does someone know how?
Friend, you need to read/research... a lot. I don't know of a way to flash a rom using just a PC. But flashing CM is just like flashing any other rom for your device. Please read the thread of the rom you're wanting to install thoroughly (especially the OP) before proceeding.
And most definitely stay away from Rom Manger; it just isn't completely compatible with the i777.
SteveMurphy said:
Friend, you need to read/research... a lot. I don't know of a way to flash a rom using just a PC. But flashing CM is just like flashing any other rom for your device. Please read the thread of the rom you're wanting to install thoroughly (especially the OP) before proceeding.
And most definitely stay away from Rom Manger; it just isn't completely compatible with the i777.
Click to expand...
Click to collapse
Isnt there a CWM for i777? I found the app recovery tool that installs CWM but before installing it you see the SCARY rom manager logo, i researched a lot, but i dont know what to do, most of posts and videos are using rom manager.
On the i777 the recovery (in most cases it's CWM) is included in the kernel. So there's no need to install it separately.
The only time you'd ever need to install CWM manually is if you're trying to get from JB to KK. Is this the case? You state you want CM but you fail to list which version. More information would be helpful, such as what you're currently running and what you're trying to accomplish.
SteveMurphy said:
On the i777 the recovery (in most cases it's CWM) is included in the kernel. So there's no need to install it separately.
The only time you'd ever need to install CWM manually is if you're trying to get from JB to KK. Is this the case? You state you want CM but you fail to list which version. More information would be helpful, such as what you're currently running and what you're trying to accomplish.
Click to expand...
Click to collapse
Im running at&t 4.1.2, i want to flash CM 10.2
OP,
Ok here ya go...
U can get Root with Framaroot apk (found here on XDA).
U can use Mobile Odin (available on XDA or Play Store) to flash a compatible 4.1.2 dev'd kernel, that includes cwm recovery (see AJK thread in Dev forum).
Flash the AJK kernel (boot.img) initially through Mobile Odin, then reboot into said cwm and flash the AJK kernel again (the whole kernel.zip) so that the capacitive buttons work correctly. Then reboot into recovery and flash ur Rom of choice, per that Rom's OP install instructions. This has been posted quit a few times by myself and others, specifically creepyncrawly. Plz continue to read up thoroughly in the threads i mentioned above and happy flashing. :thumbup:
Sent from my SAMSUNG-SGH-I747 using Tapatalk
4-2ndtwin said:
OP,
Ok here ya go...
U can get Root with Framaroot apk (found here on XDA).
U can use Mobile Odin (available on XDA or Play Store) to flash a compatible 4.1.2 dev'd kernel, that includes cwm recovery (see AJK thread in Dev forum).
Flash the AJK kernel (boot.img) initially through Mobile Odin, then reboot into said cwm and flash the AJK kernel again (the whole kernel.zip) so that the capacitive buttons work correctly. Then reboot into recovery and flash ur Rom of choice, per that Rom's OP install instructions. This has been posted quit a few times by myself and others, specifically creepyncrawly. Plz continue to read up thoroughly in the threads i mentioned above and happy flashing. :thumbup:
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
Thank you so much, excuse my next stupid question, when should i wipe? Before or after flasing the kernel .zip? And before (boot.img) should i wipe?
Enmanuelng said:
Thank you so much, excuse my next stupid question, when should i wipe? Before or after flasing the kernel .zip? And before (boot.img) should i wipe?
Click to expand...
Click to collapse
It's not critical when you wipe. It's probably best to wipe before you flash the rom of your choice, though it can be done after. The worst that can happen is that it won't boot properly before you wipe, but the wipe will fix it.
creepyncrawly said:
It's not critical when you wipe. It's probably best to wipe before you flash the rom of your choice, though it can be done after. The worst that can happen is that it won't boot properly before you wipe, but the wipe will fix it.
Click to expand...
Click to collapse
So first cwm, wipe cache, dalvik, install ajk kernel and rom? Or install kernel, wipe and install rom?
Enmanuelng said:
So first cwm, wipe cache, dalvik, install ajk kernel and rom? Or install kernel, wipe and install rom?
Click to expand...
Click to collapse
From stock 3e recovery, you should perform a wipe data/factory reset, then install AJK kernel and the rom. You will not be able to perform wipe cache and dalvik from stock 3e recovery as far as I remember. But either way, the important wipe is wipe data/factory reset from within recovery.
Wow guys thank you so so much it worked i admire what you guys do but no i installed cyanogen 10.1 which ajk kernel is compatible because i think Ajk kernel noswap wont work anymore.
AJ has an AOSP kernel in the OP of his [Kernel] AJK thread.
Sent from my SAMSUNG-SGH-I747 using Tapatalk