deleted
I don't understand your question/problem at all and I doubt I'm alone. Try and rephrase it. If you're unable, the rules allow you to post in another language (i.e. your native language), as long as you also include a translation to English. Doing this might give you better results.
if im correct he wanted to know why after wipe and flashing a new rom which i think is stock Gb he is not getting welcome screen / first setup screen, where you set time, region and language...
atifsh said:
if im correct he wanted to know why after wipe and flashing a new rom which i think is stock Gb he is not getting welcome screen / first setup screen, where you set time, region and language...
Click to expand...
Click to collapse
thanks and yes you are correct and also for ice cream roms
hamadazh said:
thanks and yes you are correct and also for ice cream roms
Click to expand...
Click to collapse
When you say you wipe before flashing, did you wipe data, cache, and dalvik?
Kaze105 said:
When you say you wipe before flashing, did you wipe data, cache, and dalvik?
Click to expand...
Click to collapse
yes and also format cache and system and data from Mounts and Storage but sorry this happens when i flash icecream roms only but working on GB
hamadazh said:
yes and also format cache and system and data from Mounts and Storage but sorry this happens when i flash icecream roms only but working on GB
Click to expand...
Click to collapse
What ics rom? Cm9
if thats the case you need to flash Google apps also.
atifsh said:
What ics rom? Cm9
if thats the case you need to flash Google apps also.
Click to expand...
Click to collapse
no i flash many roms like JPLPC and JHLP9 and XWLP7 and wanam rom
hamadazh said:
no i flash many roms like JPLPC and JHLP9 and XWLP7 and wanam rom
Click to expand...
Click to collapse
Flash Gapps after flashing a ROM.
Usually a gapps link is included on every OP page of a ROM thread if not built in the ROM.
P.S.
I almost had a heart attack reading your 1st post. Joke!
clifffhanger said:
Flash Gapps after flashing a ROM.
Usually a gapps link is included on every OP page of a ROM thread if not built in the ROM.
P.S.
I almost had a heart attack reading your 1st post. Joke!
Click to expand...
Click to collapse
ha ha ha ha sorry i could't explain my problem because my English not good but i am try to do my best sorry and thanks for help
Related
Ive been happily using shooter's custom rom on my evo 3d. however i have rs 1 and i want to upgrade to rs3
can anyone describe or point me in the right direction to do this upgrade? do i have to do a full wipe? or can i just apply the new rs3 like i did rs1?
Ive searched here on the forms and via google and did not find anything related.
thanks!
i hope you have thick skin .............
Ive searched here on the forms and via google and did not find anything related.
Click to expand...
Click to collapse
No. You did not.
great here we go..
Download superwipe from virus thread flash it. For rsl 3 you need to first flash rsl 2.1 them flash rsl 3 without wiping
Lastly this is a question wrong forum dude this belongs in evo q and a not development
Sent from my PG86100 using XDA App
i mean i see posts like this:
http://forum.xda-developers.com/showthread.php?t=502985
and
http://forum.xda-developers.com/showthread.php?t=1053877
by doing a search like this, but none of these address my question:
http://www.google.com/cse?q=upgrade...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
Why didn't you ask in the thread of the rom?
What part of THIS in the download links did you not see?
RLS2 Official= http://www.megaupload.com/?d=ASTSJ0BJ
RLS2.1 Official= http://www.multiupload.com/55TTHGV3ES
RLS3 Official= http://www.multiupload.com/1FSRM98PLL [Just Flash Over 2.1 And Wipe Dalvik And Cache]
Click to expand...
Click to collapse
That's just sad. Why would you search anywhere else except the thread itself?
To answer your question: No you cannot just flash RLS3 by itself. This is only an update to the RLS2.1 ...So flash RLS2.1 then wipe cache and dalvik and then flash the RLS3.
budroux said:
To answer your question: No you cannot just flash RLS3 by itself. This is only an update to the RLS2.1 ...So flash RLS2.1 then wipe cache and dalvik and then flash the RLS3.
Click to expand...
Click to collapse
Which it clearly states in the download section.
Hi there!
As i have try to find info about downgrading ROM's with no success. (It's big forum indeed).
I have installed ICS XXLPH. Rooted and CWM-ed with Chainfire kernel.
If i want to install custom GB ROM's with CWM are there some precautions that has to be taken prior to go from ICS to GB?
Thanks a lot!
Brgds,
M.
You can just flash immediately from CWM with no problems, there are no actual precautions. However, you will need to wipe all of your data, cache and dalvik COMPLETELY before flashing because any ICS data will not be compatible with GB (otherwise, you'll just have non-stop crashing and force close issues)
Step 1 - use the search button
BigMrB said:
Step 1 - use the search button
Click to expand...
Click to collapse
I DID!!!! But haven't found what i was looking for ( Thanks!
Reboot into cwm, wipe everything (data, cache, dalvik), flash zip - rom and reboot.
Sent from my GT-I9100 using XDA App
So i guess no big deal to jump from ICS to GB. Thanks guys!
Brgds,
M.
mesnati said:
I DID!!!! But haven't found what i was looking for ( Thanks!
Click to expand...
Click to collapse
http://www.google.com/cse?q=downgra...ub-2900107662879704:fs7umqefhnf&ie=ISO-8859-1
So the answer is not in one of those threads
mesnati said:
So i guess no big deal to jump from ICS to GB. Thanks guys!
Brgds,
M.
Click to expand...
Click to collapse
You may need to change the bootloader .
jje
Use Odin and flash a rom(2.3.6) which have bootlader for example XWKK5.
Here is bootlader:
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
prinnyvaca said:
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
Click to expand...
Click to collapse
How are you flashing the ROMs?
Kangburra said:
How are you flashing the ROMs?
Click to expand...
Click to collapse
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
prinnyvaca said:
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
Click to expand...
Click to collapse
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Do a factory reset after the flash
Kangburra said:
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Click to expand...
Click to collapse
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
prinnyvaca said:
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
Click to expand...
Click to collapse
Can you flash a JB stock ROM?
Kangburra said:
Can you flash a JB stock ROM?
Click to expand...
Click to collapse
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
slaphead20 said:
Do a factory reset after the flash
Click to expand...
Click to collapse
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
prinnyvaca said:
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
Click to expand...
Click to collapse
no, but always worth a try, but backup first
I just solve it and its weird. I had to do a full reset with stock recovery and then I can boot in stock rom and even use rom's like cyamogenmod or aosp.
I don't know what was the problem but now is solved
Thanks a lot to all for your help
Enviado desde mi GT-I9300 usando una tostadora
Hello everybody,
I have problem, after I flashed omega v39(after that I try flash another roms and still the same) is my galaxy s3 laggy, some aplication doens´t work and wipe data/factory reset takes little bit longer.
I tried another version of CWM and it doesn´t help.
Thanks for help
Well... What do you want to know?
try aosp then. Read up on how to install
orangerot. said:
Well... What do you want to know?
Click to expand...
Click to collapse
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
dada.cz said:
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
Click to expand...
Click to collapse
Omega questions in the Omega thread do not post multiple times the same question .
A guess is that it was a bad flash wipe phone re download rom or use V40 and flash again .
Problems flash stock rom .
jje
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Wipe phone flash stock rom and test and or read the rom thread .
rromao1 said:
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Click to expand...
Click to collapse
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
JJEgan said:
Wipe phone flash stock rom and test and or read the rom thread .
Click to expand...
Click to collapse
I did that and temperature stays ok
sriram231092 said:
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
Click to expand...
Click to collapse
did that as well but same happens.
funny enough I had version 5 for some time and worked fine.
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
cooza said:
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
Click to expand...
Click to collapse
there is no cutom kernel for the leaked f/w buddy
sriram231092 said:
there is no cutom kernel for the leaked f/w buddy
Click to expand...
Click to collapse
Yeah I just saw that. My bad. I guess he could always reflash the rom kernel incase its corrupt.
reinstalled rom after complete wipe and it´s working fine.
thanks