Related
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
prinnyvaca said:
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
Click to expand...
Click to collapse
How are you flashing the ROMs?
Kangburra said:
How are you flashing the ROMs?
Click to expand...
Click to collapse
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
prinnyvaca said:
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
Click to expand...
Click to collapse
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Do a factory reset after the flash
Kangburra said:
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Click to expand...
Click to collapse
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
prinnyvaca said:
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
Click to expand...
Click to collapse
Can you flash a JB stock ROM?
Kangburra said:
Can you flash a JB stock ROM?
Click to expand...
Click to collapse
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
slaphead20 said:
Do a factory reset after the flash
Click to expand...
Click to collapse
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
prinnyvaca said:
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
Click to expand...
Click to collapse
no, but always worth a try, but backup first
I just solve it and its weird. I had to do a full reset with stock recovery and then I can boot in stock rom and even use rom's like cyamogenmod or aosp.
I don't know what was the problem but now is solved
Thanks a lot to all for your help
Enviado desde mi GT-I9300 usando una tostadora
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.
Hi there,
Can you please help me, I am a NOOB and I been looking and trying to fix my phone for a week and I cant work it out, therefore I come here seeking your help, I would very much value ideas or solutions you could provide.
I will be as brief as possible.
When I try to flash a new Rom, my phone gets stuck on the boot screen, there are only two roms that load, one freezes, the others roms wont boot.
All started like this:
I originally had RR JB V3.1.3 AOKP 4.2.1 I9100
Then changed to
AllianceROM_I9100_XWLSS_V8, look good but thought of trying the aokp i9100 jb-mr1 milestone-1, when trying to swap I made the mistake of doing a factory reset to find out that I could not access the roms on my sdcard.
so I then installed (I9100_CODE_I9100XXLP2_CL57619_REV02_user_low_ship.tar) it all worked as it went to stock. I rooted the phone again, tried installing the AllianceRom, but it didnt want to load, tried the Aokp again it did work, but then once the screen turns off it wont respond...
tried super nexus, did not want to work. tried updating CMW, it doesnt want to... Tried Jellybam, did not load...
So I tried and reloaded RR JB V 3.1.3 as I already have and it works, it is the only rom that works successfully, But if I try to go on to CMW, it doesnt work anymore, and it seems that once I try to use CMW it makes the rom unstable... So it seems that I can only use one Rom at the moment. Clearly I must of done something wrong at some point but I dont know what. I dont even know what to search for to fix it.
I tried different tools to see if they would help and no luck, such as, GS2ROMNuke, Romreset and Romwipe, Darkside cache and superwipe.
I hope someone can help me out in working out what I did wrong or what is happening.
Thank you so much for your time and help.
Bump, Any help would be very much appreciated.
Thnaks
Bumping inside 24 hrs is not permitted.
MistahBungle said:
Bumping inside 24 hrs is not permitted.
Click to expand...
Click to collapse
Thanks for letting me know... Will keep that in mind next time.
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
andrewwright said:
Try kernel nuke then flash another kernel say siyah as its got cwm. Should be good then mate. Then install alliance rom. Also when you installed and booted for first time on these roms did you try wipe cache and dalv cache fix Permission ??
sent from my I9100 Alliance v8
Click to expand...
Click to collapse
Thanks for the tip... I did try however I dont have access to cwm anymore once I install RR.
The only way I can get CWM to work again, is installing speedmod-kernel-s2-k2-21- through Odin but then the rom doesnt work anymore.
I tried the kernel nuke, I have tried installing siyah kernel with RR, but no luck it doesnt go into cmw. keep getting a message Kernel Panic...
anymore suggestions?
Could I have done something on the mounts? I dont know, but I cant think of what is going on.
Could it be that my phone has emmc brick?
I came across two apps
Got Brickbug?
Verdict
Danger! This eMMC chip is known to have the brick bug!
and
eMMC check
Brick Bug?
Yes. Insane chip....
Could someone please give me an indication what this means for me? Thanks
Yes, it's sticked in the general forum.
Sent from the little guy
gastonw said:
Yes, it's sticked in the general forum.
Sent from the little guy
Click to expand...
Click to collapse
Thanks mate!!!
One final question, why is it that the RR Rom is the only one to work rather well? (CMW does not work once the rom is intalled)
Thanks heaps!
Where did you hear that?
Sent from the little guy
gastonw said:
Where did you hear that?
Sent from the little guy
Click to expand...
Click to collapse
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
swifteagle said:
RR is runing rather well,I have tried it... I have currently stock installed and it is working just fine....
Any ideas? Thanks
Click to expand...
Click to collapse
"Serenity now, insanity later"
gastonw said:
"Serenity now, insanity later"
Click to expand...
Click to collapse
hahahaha, so is my s2's chip insane?
Thanks
swifteagle said:
hahahaha, so is my s2's chip insane?
Thanks
Click to expand...
Click to collapse
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
gastonw said:
Yes, but you don't need to worry (as long as you're not on 4.0.4), and that's that.
Click to expand...
Click to collapse
Thanks...Fantastic!!!
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Wipe phone flash stock rom and test and or read the rom thread .
rromao1 said:
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Click to expand...
Click to collapse
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
JJEgan said:
Wipe phone flash stock rom and test and or read the rom thread .
Click to expand...
Click to collapse
I did that and temperature stays ok
sriram231092 said:
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
Click to expand...
Click to collapse
did that as well but same happens.
funny enough I had version 5 for some time and worked fine.
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
cooza said:
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
Click to expand...
Click to collapse
there is no cutom kernel for the leaked f/w buddy
sriram231092 said:
there is no cutom kernel for the leaked f/w buddy
Click to expand...
Click to collapse
Yeah I just saw that. My bad. I guess he could always reflash the rom kernel incase its corrupt.
reinstalled rom after complete wipe and it´s working fine.
thanks
im having trouble with revolution rom v10 but since v8 if im not mistaken.
Everything seems to work except camera. It shows camera failure.
I did full wipe but nothing seems to work.
Can somebody help me?
I had to post here since i dont have enough posts to do it in android development section.
Thanks in advance .
decathlon said:
im having trouble with revolution rom v10 but since v8 if im not mistaken.
Everything seems to work except camera. It shows camera failure.
I did full wipe but nothing seems to work.
Can somebody help me?
I had to post here since i dont have enough posts to do it in android development section.
Thanks in advance .
Click to expand...
Click to collapse
Hi!
You need to install ROM with the stock kernel first time and flash other kernel if you want. I solved this problem doing this procedure.
yup
iagomach said:
Hi!
You need to install ROM with the stock kernel first time and flash other kernel if you want. I solved this problem doing this procedure.
Click to expand...
Click to collapse
:good: also you can flash the Note 3 camera .zip from CWM search well on that threat...