First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
prinnyvaca said:
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
Click to expand...
Click to collapse
How are you flashing the ROMs?
Kangburra said:
How are you flashing the ROMs?
Click to expand...
Click to collapse
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
prinnyvaca said:
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
Click to expand...
Click to collapse
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Do a factory reset after the flash
Kangburra said:
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Click to expand...
Click to collapse
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
prinnyvaca said:
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
Click to expand...
Click to collapse
Can you flash a JB stock ROM?
Kangburra said:
Can you flash a JB stock ROM?
Click to expand...
Click to collapse
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
slaphead20 said:
Do a factory reset after the flash
Click to expand...
Click to collapse
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
prinnyvaca said:
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
Click to expand...
Click to collapse
no, but always worth a try, but backup first
I just solve it and its weird. I had to do a full reset with stock recovery and then I can boot in stock rom and even use rom's like cyamogenmod or aosp.
I don't know what was the problem but now is solved
Thanks a lot to all for your help
Enviado desde mi GT-I9300 usando una tostadora
Related
Hey guys i have been having some signal problems with my ace, but I only have them when inside my house. This started happening when I flashed gingerbread 2.3.5 to get a custom rom for my Ace (which is awesome btw!) the rom I am currently using is WP7 Rom by Jinavs. I have googled & searched a lot and all I found was a code to change the GSM too 900/1800 but I tried the code and it said that it was invalid, the code is *#2263#. Then I read something about changing the phone's modem is this possible on custom firmware? I never had any problems when I was on Stock Froyo 2.2.1. Any help guys?
Also master reset or factory reset does not work :/
what I do sometimes is airplane mode or turn off the phone and it sometimes works
and it only happens inside my house it works fine in any other place.
Any help will be appreciated
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
shailpancholi said:
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I'm from Puerto Rico if that changes anything. Also is this risky? would it brick my phone because the Rom I'm using is based on XWKS2
Also how would I flash the modem only?
And I would like to keep this rom because I love WP7 xD
Anyone? :/
Reflash with stock gb rom for your region
Sent from your phone
an0nym0us_ said:
Reflash with stock gb rom for your region
Sent from your phone
Click to expand...
Click to collapse
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
iAreBeRtii said:
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
Click to expand...
Click to collapse
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
an0nym0us_ said:
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
Click to expand...
Click to collapse
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
iAreBeRtii said:
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
Click to expand...
Click to collapse
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
an0nym0us_ said:
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
Click to expand...
Click to collapse
Ok but the firmware is a 1 package.
Am I going to flash only the modem or the whole rom?
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
an0nym0us_ said:
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
Click to expand...
Click to collapse
Ok so let me get this right.
1. Backup with CWM
2. Flash Rom with ODIN
3. go into CWM and restore backup
4. check modem
am I missing anything?
Sorry if I ask a lot I just don't wanna eff up my phone
yes correct.
an0nym0us_ said:
yes correct.
Click to expand...
Click to collapse
Ok I will do that and get back to you
If it works I'll click thanks on all your posts 'till I run out of thanks for the day
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
Oh ok then imma search the forum for the CWM
already restoring backup
OMG THANKS DUDE you made a guy in puerto rico really happy right now I will try the FW out and will report back well here I go as I promised thanks to your posts
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
iAreBeRtii said:
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
Click to expand...
Click to collapse
clear data/factory reset from cwm. note that u'll lost all data when doing so, but if its not working either even after factory reset then just restore the cwm backup
its worth a try
Can we simply flash 'stock ICS' over CM9? I mean will there be any probs?
I don't have an S2. This is for my friend. I tried to search for it but I couldn't find anything regarding CM9.
Thanks in advance!
Jazz Like That said:
Can we simply flash 'stock ICS' over CM9? I mean will there be any probs?
I don't have an S2. This is for my friend. I tried to search for it but I couldn't find anything regarding CM9.
Thanks in advance!
Click to expand...
Click to collapse
Their is no stock ICS yet.
jje
Jazz Like That said:
Can we simply flash 'stock ICS' over CM9? I mean will there be any probs?
I don't have an S2. This is for my friend. I tried to search for it but I couldn't find anything regarding CM9.
Thanks in advance!
Click to expand...
Click to collapse
Just try it and report back.
If you get bootloops, you may have to to a factory reset in recovery mode (press Volume UP + Home + Power until recovery menu appears).
Good luck !
JJEgan said:
Their is no stock ICS yet.
Click to expand...
Click to collapse
Of course there is Stock ICS but not official one. The latest one that is released for i9100 is XXLPJ ICS 4.0.3 firmware.
Now my doubt is can we just flash it directly over CM9?
Heard from one of my friend that in 'samsung galaxy s' we cannot simply restore CM7 backup over CM9. Firsly we have to flash CM7 over CM9 and then we have to restore the CM7 backup.
For S2, downgrading to GB from CM7 is fine. But what about from CM9? Can we directly flash ICS or do we have to come to GB first and then upgrade to ICS?
Actually I would have flashed it yesterday itself but am just waiting for some replies. Till today night I am gonna wait and then I will flash it and reply here.
Just get the phone to download mode and flash with Odin. Yes it can be done
Sent from my GT-I9100 using XDA
I agree. I don't think there would be a problem flashing it. Just do a "full wipe" before.
Flashed the latest ICS (XXLPJ 4.0.3) and it is working fine. Thank you guys!
Was your data lost?
DuperMan said:
Was your data lost?
Click to expand...
Click to collapse
I did a wipe before flashing. So all data is lost obviously.
But generally whenever we flash any stock rom or custom rom all data will be lost, right?
Jazz Like That said:
I did a wipe before flashing. So all data is lost obviously.
But generally whenever we flash any stock rom or custom rom all data will be lost, right?
Click to expand...
Click to collapse
It's complicated, but very generally speaking - yes.
I would still wait for a no-wipe cwm of the rom to see how compatible sammy ics and cm9 ics roms are
Hello everybody,
I have problem, after I flashed omega v39(after that I try flash another roms and still the same) is my galaxy s3 laggy, some aplication doens´t work and wipe data/factory reset takes little bit longer.
I tried another version of CWM and it doesn´t help.
Thanks for help
Well... What do you want to know?
try aosp then. Read up on how to install
orangerot. said:
Well... What do you want to know?
Click to expand...
Click to collapse
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
dada.cz said:
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
Click to expand...
Click to collapse
Omega questions in the Omega thread do not post multiple times the same question .
A guess is that it was a bad flash wipe phone re download rom or use V40 and flash again .
Problems flash stock rom .
jje
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Wipe phone flash stock rom and test and or read the rom thread .
rromao1 said:
I´ve flashed S4 Revolution v6 rom with no problems at all.
After going on a tour my i9300 reached 43º. I thought it was just me getting excited but it still happens.
I´m using titanium backup and removed all apps I didn´t want but didn´t improve.
After idle it´s ok but as I start using net or a few multitasks.... 43º again
Also, I´ve deleted cache, dalvik and factory as well and flashed again with no luck.
On another note, on previous S4 Revolution v5 it was fine.
Any ideas please???
Click to expand...
Click to collapse
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
JJEgan said:
Wipe phone flash stock rom and test and or read the rom thread .
Click to expand...
Click to collapse
I did that and temperature stays ok
sriram231092 said:
any way that is based on a leaked rom and hence bugs are expected. tweak according to your requirements. else mega wipe and flash the rom again.
Click to expand...
Click to collapse
did that as well but same happens.
funny enough I had version 5 for some time and worked fine.
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
cooza said:
Heating can sometimes be caused by the kernel.Wipe cache partition and flash a custom kernel.
Click to expand...
Click to collapse
there is no cutom kernel for the leaked f/w buddy
sriram231092 said:
there is no cutom kernel for the leaked f/w buddy
Click to expand...
Click to collapse
Yeah I just saw that. My bad. I guess he could always reflash the rom kernel incase its corrupt.
reinstalled rom after complete wipe and it´s working fine.
thanks