Can we simply flash 'stock ICS' over CM9? I mean will there be any probs?
I don't have an S2. This is for my friend. I tried to search for it but I couldn't find anything regarding CM9.
Thanks in advance!
Jazz Like That said:
Can we simply flash 'stock ICS' over CM9? I mean will there be any probs?
I don't have an S2. This is for my friend. I tried to search for it but I couldn't find anything regarding CM9.
Thanks in advance!
Click to expand...
Click to collapse
Their is no stock ICS yet.
jje
Jazz Like That said:
Can we simply flash 'stock ICS' over CM9? I mean will there be any probs?
I don't have an S2. This is for my friend. I tried to search for it but I couldn't find anything regarding CM9.
Thanks in advance!
Click to expand...
Click to collapse
Just try it and report back.
If you get bootloops, you may have to to a factory reset in recovery mode (press Volume UP + Home + Power until recovery menu appears).
Good luck !
JJEgan said:
Their is no stock ICS yet.
Click to expand...
Click to collapse
Of course there is Stock ICS but not official one. The latest one that is released for i9100 is XXLPJ ICS 4.0.3 firmware.
Now my doubt is can we just flash it directly over CM9?
Heard from one of my friend that in 'samsung galaxy s' we cannot simply restore CM7 backup over CM9. Firsly we have to flash CM7 over CM9 and then we have to restore the CM7 backup.
For S2, downgrading to GB from CM7 is fine. But what about from CM9? Can we directly flash ICS or do we have to come to GB first and then upgrade to ICS?
Actually I would have flashed it yesterday itself but am just waiting for some replies. Till today night I am gonna wait and then I will flash it and reply here.
Just get the phone to download mode and flash with Odin. Yes it can be done
Sent from my GT-I9100 using XDA
I agree. I don't think there would be a problem flashing it. Just do a "full wipe" before.
Flashed the latest ICS (XXLPJ 4.0.3) and it is working fine. Thank you guys!
Was your data lost?
DuperMan said:
Was your data lost?
Click to expand...
Click to collapse
I did a wipe before flashing. So all data is lost obviously.
But generally whenever we flash any stock rom or custom rom all data will be lost, right?
Jazz Like That said:
I did a wipe before flashing. So all data is lost obviously.
But generally whenever we flash any stock rom or custom rom all data will be lost, right?
Click to expand...
Click to collapse
It's complicated, but very generally speaking - yes.
I would still wait for a no-wipe cwm of the rom to see how compatible sammy ics and cm9 ics roms are
Related
I've spent the last 2 days trying to fix my mistake. I have the GS2 ATT version, and I didn't realise there was a difference between that and the GTI9100 S2.
I wanted to give some tips I learned on how to recover your phone if you make this mistake.
First, here are some posts you'll want to look at:
http://forum.xda-developers.com/showthread.php?t=1286432 - Stock firwmware
http://forum.xda-developers.com/showthread.php?t=1285823 - Clockworkmod for the ATT
http://forum.xda-developers.com/showthread.php?t=1286192 - Cyanogenmod for our phones.
Using Odin and the stock firmware, you can recover your phone to a 95% working state. Once I got my stock firmware on there, I found that while making calls my phone made no sound, and the mic didn't work. The mic did work when I wasn't making calls though.
I reflashed the modem.bin file found on the stock firmware, not sure if its required but that is what I did first. Then, I unpacked the rooted stock firmware, and flashed JUST THE zImage file. After doing this, I rebooted, and my calls were working again.
After that, I installed the correct version of Clockworkmod, and then CM7 nightly. Now everything seems to be running great on my phone.
Hope this helps someone out there,
-Orbital
Good job thanx man.
Sent from my SAMSUNG-SGH-I777 using XDA App
Been awhile since I messed w/ android. I forgot about the different models myself until I realized I was spending half my day in the wrong section
Could you please explain the flashing of the CM Nightlies process to me? I can flash the signed base build but can't flash any of the added on nightlies...
Alucardis666 said:
Could you please explain the flashing of the CM Nightlies process to me? I can flash the signed base build but can't flash any of the added on nightlies...
Click to expand...
Click to collapse
In other words I can't flash the nightly builds like the latest 77 or any others for that matter.
Alucardis666 said:
In other words I can't flash the nightly builds like the latest 77 or any others for that matter.
Click to expand...
Click to collapse
Those are NOT for our version of the GS2, International only. Our version is here in the development forum.
Sent from my SGH-I777 using xda premium
Yes, it will return a status error 7 which means it's unmatched. Ask me how I know. I flashed international roms last night and used this fix to get me good again.
I flashed a KE7 I9100 build to my I777 and saw no ill effects other than incorrect capacitive button mapping. Which build did you flash? Did you make sure to wipe data factory reset afterwards.
So you are saying that you wre able to flash Euro ROMS and your phone booted just fine? Mine didnt boot at all. Did you flash the KERNEL for ATT on top of it ?
connexion2005 said:
I flashed a KE7 I9100 build to my I777 and saw no ill effects other than incorrect capacitive button mapping. Which build did you flash? Did you make sure to wipe data factory reset afterwards.
Click to expand...
Click to collapse
The simple thing would be to change out the sec_touchkey.kl with rootexplorer and take the sec_touchkey from system/usr/keylayout should fix the i9100 rom to work with the i777. Seeing as how this worked for the Captivate *i897* for jvr, jvs, and jvt darkyrom releases and I would assume that it would work.
daraj said:
So you are saying that you wre able to flash Euro ROMS and your phone booted just fine? Mine didnt boot at all. Did you flash the KERNEL for ATT on top of it ?
Click to expand...
Click to collapse
Personally I would think that you had a bad flash? Did you flash through Odin or CWM? From what I have been reading the gb bootloaders between the i777 and i9100 are different and I can see if you used a custom i9100 rom flashing via cwm could cause that. Since I am not too sure on the sgs2 if the differences between the euro models versus the carrier locked, the Kernel will not fix the button mapping, I learned this with the captivate when I switched over to using DarkyRom jvr and jvs builds since they were the most stable of GB for the i897 captivate. Plus if you are going to run a i9100 rom, I am sure the modem will not work with the att kernel. Especially if the situation with the cappy is any indication that att kernel needs att modem and i9000 kernel needs i9000 modem. I will be able to know more as soon as I get my i777 tomorrow.
HTH,
Charlie
Does anyone know how to remove the i9100 splash screen?
Google Talk Video does not work after updating to CyanogenMod 7 and back to stock rom. Any suggestion ?
spbluffmaster said:
Google Talk Video does not work after updating to CyanogenMod 7 and back to stock rom. Any suggestion ?
Click to expand...
Click to collapse
wipe data/factory reset
tried that three times... didnt help..
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
SO why do you say this flashes you back to 95%? Is there no 100% return to stock fix?
DiscipleDOC said:
Does anyone know how to remove the i9100 splash screen?
Click to expand...
Click to collapse
Speedy350z said:
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1311975
re: get rid of i9100 boot logo
Speedy350z said:
Did the same thing and made it back to ATT version and running CM7 for now. Still have an I9100 boot screen with a yellow logo. How do I get rid of that?
Click to expand...
Click to collapse
Use a download mode jig or flash entropy 512's stock TAR kernel with Odin from the link below.
http://forum.xda-developers.com/show....php?t=1286432
Good luck!
highaltitude said:
SO why do you say this flashes you back to 95%? Is there no 100% return to stock fix?
Click to expand...
Click to collapse
Some people need to wipe or also flash the modem for 100%.
Also, people who managed to flash a bootloader without hardbricking can't get back to stock with any confirmed method.
I have posted bootloader dumps, but no one has flashed them and I'm not messing with trying to flash them. They are dumps from my device and that is the ONLY guarantee I provide for them.
Entropy512 said:
Some people need to wipe or also flash the modem for 100%.
Also, people who managed to flash a bootloader without hardbricking can't get back to stock with any confirmed method.
I have posted bootloader dumps, but no one has flashed them and I'm not messing with trying to flash them. They are dumps from my device and that is the ONLY guarantee I provide for them.
Click to expand...
Click to collapse
i messed up and flashed an i9100 rom and am having the call prob u described. can i just flash the modem or stock rooted kernel and be back to 100%? if so do i use odin and do i need to check the box for repartition or anything like that? thx in advance!!!
Hey guys i have been having some signal problems with my ace, but I only have them when inside my house. This started happening when I flashed gingerbread 2.3.5 to get a custom rom for my Ace (which is awesome btw!) the rom I am currently using is WP7 Rom by Jinavs. I have googled & searched a lot and all I found was a code to change the GSM too 900/1800 but I tried the code and it said that it was invalid, the code is *#2263#. Then I read something about changing the phone's modem is this possible on custom firmware? I never had any problems when I was on Stock Froyo 2.2.1. Any help guys?
Also master reset or factory reset does not work :/
what I do sometimes is airplane mode or turn off the phone and it sometimes works
and it only happens inside my house it works fine in any other place.
Any help will be appreciated
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
shailpancholi said:
Use 2.3.4 Asia version ddkq6 no signal problems.and use cm7.2 fat kang by frozen ace more steadier ...
Hit thanxs if I helped
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
I'm from Puerto Rico if that changes anything. Also is this risky? would it brick my phone because the Rom I'm using is based on XWKS2
Also how would I flash the modem only?
And I would like to keep this rom because I love WP7 xD
Anyone? :/
Reflash with stock gb rom for your region
Sent from your phone
an0nym0us_ said:
Reflash with stock gb rom for your region
Sent from your phone
Click to expand...
Click to collapse
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
iAreBeRtii said:
But if I do that I will lose the custom rom
I wanna find a way to keep custom rom but get rid of signal problems inside my house.
Is it possible?
Click to expand...
Click to collapse
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
an0nym0us_ said:
create a cwm backup then. the point of reflashing stock rom is to get correct modem for your region. after that u can just restore the cwm backup, it wont overwrite the modem.
Click to expand...
Click to collapse
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
iAreBeRtii said:
Ok I found stock 2.3.4 for my region does that work?
My phone is in 2.3.5
Click to expand...
Click to collapse
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
an0nym0us_ said:
yes. even if its 2.3.3 it doesnt concern u. u only need the modem.
Click to expand...
Click to collapse
Ok but the firmware is a 1 package.
Am I going to flash only the modem or the whole rom?
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
an0nym0us_ said:
whole rom. even if after flashing it doesnt boot/stuck on boot/bootloop, just restore previous cwm backup and see if the modem version in phone setting changed
Click to expand...
Click to collapse
Ok so let me get this right.
1. Backup with CWM
2. Flash Rom with ODIN
3. go into CWM and restore backup
4. check modem
am I missing anything?
Sorry if I ask a lot I just don't wanna eff up my phone
yes correct.
an0nym0us_ said:
yes correct.
Click to expand...
Click to collapse
Ok I will do that and get back to you
If it works I'll click thanks on all your posts 'till I run out of thanks for the day
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
Oh ok then imma search the forum for the CWM
already restoring backup
OMG THANKS DUDE you made a guy in puerto rico really happy right now I will try the FW out and will report back well here I go as I promised thanks to your posts
an0nym0us_ said:
whoops.. need to correct a thing.
after flashing with odin u need to reflash cwm from stock recovery first before u can restore previous cwm backup, because odin overwrite the whole phone to stock including recovery
Click to expand...
Click to collapse
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
iAreBeRtii said:
This is off-topic but can you help me with a sound issue i have?
it seems the system sounds (dialer, keyboard, etc) stopped working lately :/
also i downloaded those 3rd party apk's and they didn't do anything.
I remember like last saturday I did something and they started working but I don't remember what D:
Do you know how to fix this?
Click to expand...
Click to collapse
clear data/factory reset from cwm. note that u'll lost all data when doing so, but if its not working either even after factory reset then just restore the cwm backup
its worth a try
I upgraded my sgs2 from unnamed 2.2.1 to SHOStock 2.1 and I was wondering how I could go back to UnNamed 2.2.1? I tried looking around, but I couldn't find a definite answer. Should I just boot into recovery and flash the unnamed zip? Or what should I do?
Thanks
Just do a full wipe and flash whatever ROM you want. I don't think it matters if you're coming from ICS.
AraboDroid said:
Just do a full wipe and flash whatever ROM you want. I don't think it matters if you're coming from ICS.
Click to expand...
Click to collapse
that's right, but make sure the modem flashes as well.
You could just restore the nandroid backup, which you saved right before you flashed...
Scrambo said:
that's right, but make sure the modem flashes as well.
Click to expand...
Click to collapse
All modems that work with this device are interoperable. I'm still on UCKH7 with ICS.
Just restore your nandroid, that's all.
Sent from my GT-N7000 using Tapatalk 2
Like the others said, if you don't have a nandroid backup, just do a full wipe & flash unnamed. I'm pretty sure it will flash the modem that unnamed comes with, but you wouldn't have to worry about modems anyway.
further to add I think unNamed comes with KH6
Nosferatu. said:
further to add I think unNamed comes with KH6
Click to expand...
Click to collapse
KK6. No such thing as KH6.
mattdm said:
KK6. No such thing as KH6.
Click to expand...
Click to collapse
typo
Good
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
prinnyvaca said:
First of all i apologize if i don't post this thread in the right place and if there's already a thread about this but i looked a lot and found nothing.
My problem is that i cant make my phone boot in stock rom ics.
I tried with lots of stock roms, not just from my country, but also from anothers, but i can use JB rom (from Poland right now, in omega rom) without any problem.
The phone is stuck at bootloader, and if i wipe data/factory reset, it get's stuck in the language selection screen and if i touch it, anything happens.
Also i tried to flash roms like cyanogenmod and aosp rom and they just stay on bootloader and nothings happen if i wipe everything.
I appreciate if someone helps me and sorry for my bad english.
Click to expand...
Click to collapse
How are you flashing the ROMs?
Kangburra said:
How are you flashing the ROMs?
Click to expand...
Click to collapse
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
prinnyvaca said:
From Odin3 in download mode and the problem is only on ics roms and i just noticed that is also on ics nandroid backups
Click to expand...
Click to collapse
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Do a factory reset after the flash
Kangburra said:
I don't know, but if JB are OK I would not worry, just stay with a JB ROM.
Click to expand...
Click to collapse
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
prinnyvaca said:
I actualy loved JB, but the main reason is because that i can't test any rom other than Omega (they just get stuck on the bootloader and i read it may be because my JB stock rom) and the other reason is because that's a very weird bug, and i'm very curious about it
Click to expand...
Click to collapse
Can you flash a JB stock ROM?
Kangburra said:
Can you flash a JB stock ROM?
Click to expand...
Click to collapse
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
slaphead20 said:
Do a factory reset after the flash
Click to expand...
Click to collapse
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
prinnyvaca said:
I just tried with only one(XXDLIB) and no problem (tomorrow i will try with some others to know if it's only the rom or any JB)
I did a factory reset before and after the flash and it's still the same. Do i have to format the complete sdcard? including the pictures and the music and all that stuff?
Click to expand...
Click to collapse
no, but always worth a try, but backup first
I just solve it and its weird. I had to do a full reset with stock recovery and then I can boot in stock rom and even use rom's like cyamogenmod or aosp.
I don't know what was the problem but now is solved
Thanks a lot to all for your help
Enviado desde mi GT-I9300 usando una tostadora
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.