im having trouble with revolution rom v10 but since v8 if im not mistaken.
Everything seems to work except camera. It shows camera failure.
I did full wipe but nothing seems to work.
Can somebody help me?
I had to post here since i dont have enough posts to do it in android development section.
Thanks in advance .
decathlon said:
im having trouble with revolution rom v10 but since v8 if im not mistaken.
Everything seems to work except camera. It shows camera failure.
I did full wipe but nothing seems to work.
Can somebody help me?
I had to post here since i dont have enough posts to do it in android development section.
Thanks in advance .
Click to expand...
Click to collapse
Hi!
You need to install ROM with the stock kernel first time and flash other kernel if you want. I solved this problem doing this procedure.
yup
iagomach said:
Hi!
You need to install ROM with the stock kernel first time and flash other kernel if you want. I solved this problem doing this procedure.
Click to expand...
Click to collapse
:good: also you can flash the Note 3 camera .zip from CWM search well on that threat...
Related
Hi all,
Firstly thanks to all the devs and senior members who ported CM10 mini, and also helped me with all the questions i had. I didnt necessarily have to ask these questions , coz the related threads worked like an FAQ and troubleshooting guide for me.
But now im stuck at a point where i need to ask. After trying CMX mini, though i loved it, i feel i prefer a speedy snappy phone rather than a fully loaded ergo slow phone. So i decided to roll back to GingerDX rom.
The issue im facing is that since ive flashed nAa's JB kernel, i wanna re-flash the nAa GB kernel ( or zombie panic etc). Once i flash any of the older GB kernels ( ive tried a few) the phone gets stuck at the boot screen. I just cannot go into recovery to do a wipe and flash the GingerDX rom.
So my questions are:
Is there any known work around.?
Do i need to roll back to a gb kernel to run Ginger DX or can i stay on JB kernel. Im guessing it shud be GB kernel for a GB rom, but cant find any literature online.
Do i need to do a data wipe before i switch kernels?
Pls help.
Thaks in advance.
deathw15h said:
Hi all,
Firstly thanks to all the devs and senior members who ported CM10 mini, and also helped me with all the questions i had. I didnt necessarily have to ask these questions , coz the related threads worked like an FAQ and troubleshooting guide for me.
But now im stuck at a point where i need to ask. After trying CMX mini, though i loved it, i feel i prefer a speedy snappy phone rather than a fully loaded ergo slow phone. So i decided to roll back to GingerDX rom.
The issue im facing is that since ive flashed nAa's JB kernel, i wanna re-flash the nAa GB kernel ( or zombie panic etc). Once i flash any of the older GB kernels ( ive tried a few) the phone gets stuck at the boot screen. I just cannot go into recovery to do a wipe and flash the GingerDX rom.
So my questions are:
Is there any known work around.?
Do i need to roll back to a gb kernel to run Ginger DX or can i stay on JB kernel. Im guessing it shud be GB kernel for a GB rom, but cant find any literature online.
Do i need to do a data wipe before i switch kernels?
Pls help.
Thaks in advance.
Click to expand...
Click to collapse
yes, do data-wipes, or maybe format the partitions before you flash the gb kernel. GB roms won't work on the JB kernel.
SmG67 said:
yes, do data-wipes, or maybe format the partitions before you flash the gb kernel. GB roms won't work on the JB kernel.
Click to expand...
Click to collapse
will i be able to enter recovery then..
coz right now i can atleast use the CMX mod. i shouldnt happen that i do a wipe .. and then cant even enter recovery. That'll be a mess
deathw15h said:
will i be able to enter recovery then..
coz right now i can atleast use the CMX mod. i shouldnt happen that i do a wipe .. and then cant even enter recovery. That'll be a mess
Click to expand...
Click to collapse
Do a nandroid of your ROM, it will have you working again in about 2 minutes if it doesn't work.
SmG67 said:
Do a nandroid of your ROM, it will have you working again in about 2 minutes if it doesn't work.
Click to expand...
Click to collapse
That is only if i am able to enter recovery isnt it. .. and thats the problem im facing right now. Correct me if im wrong.
deathw15h said:
That is only if i am able to enter recovery isnt it. .. and thats the problem im facing right now. Correct me if im wrong.
Click to expand...
Click to collapse
pop the JB kernel back on, I figured that was the obvious thing to do in order to wipe and/or format everything...
SmG67 said:
pop the JB kernel back on, I figured that was the obvious thing to do in order to wipe and/or format everything...
Click to expand...
Click to collapse
wiped data, partition. flashed gb kernel... still cant enter recovery
deathw15h said:
wiped data, partition. flashed gb kernel... still cant enter recovery
Click to expand...
Click to collapse
repair with seus or pc companion and after that, flash gb-kernel.
SmG67 said:
repair with seus or pc companion and after that, flash gb-kernel.
Click to expand...
Click to collapse
ok sir will check it out. hope it works
deathw15h said:
ok sir will check it out. hope it works
Click to expand...
Click to collapse
Good luck
Hi,
After hard brick my s2 back to live with only 9GB and "i9100_u1_02_20110310_emmc_EXT4-patched-ums-bricked+0524288-kB".
Now I'm in stock LPH rom.
If I install a custom rom through recovery semi brick again.
Can I flash a custom rom thourgh odin? it seems i need the modified pit to be able to instal anything..
thanks
bye
edit: solved installing other custom rom, no problems now!
dalvalle said:
...
edit: solved installing other custom rom, no problems now!
Click to expand...
Click to collapse
As you already solved the problem, can you please add "[SOLVED]" to the title of your first post?
Would be very nice for other users who look through the Q&A posts trying to help others ... just like me spending some time to read your post and finally read at the end, that you don't need help any more.
Hello everybody,
I have problem, after I flashed omega v39(after that I try flash another roms and still the same) is my galaxy s3 laggy, some aplication doens´t work and wipe data/factory reset takes little bit longer.
I tried another version of CWM and it doesn´t help.
Thanks for help
Well... What do you want to know?
try aosp then. Read up on how to install
orangerot. said:
Well... What do you want to know?
Click to expand...
Click to collapse
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
dada.cz said:
well, what´s wrong? I don´t understand why this happed right now because I flash allmost every new omega roms. I need to get it back. Hope it´s possible.
Click to expand...
Click to collapse
Omega questions in the Omega thread do not post multiple times the same question .
A guess is that it was a bad flash wipe phone re download rom or use V40 and flash again .
Problems flash stock rom .
jje
I Get a notification about the update to version 4.4 BETA 1 of Paranoid Android rom, after downloaded, i flash it via CWM normaly, then flash gapps, but when the phone reboot it stucked at the Galaxy S2 boot logo, and it can boot into recovery, only download mode, but when i open odin to flash CWM but odin can't access the phone and i can't flash, i tried to install usb driver but not success, so what can i do now, please help!
Sorry for my bad English
1) Your English is better than a lot of native English speakers I know.
2) Hopper8's 'Odin troubleshooting' thread stickied in General has all the info you need to get a successful Odin flash. Find the thread, try as many of the troubleshooting steps as many times as you need to in order to get a successful flash.
However, don't try one or two things from the thread, come back here & say 'But I tried some of the stuff in the thread & it didn't work. That thread covers this issue from every possible angle, and it's often persistence that fixes these. There's no easy fix in this situation because we're not there looking over your shoulder seeing what you're doing/not doing, and there's nothing which isn't in the thread that can be suggested in this situation.
So...I've (and Hopper has) given you the tools to get your phone fixed, up to you to fix it now.
@nguyenducanh did you manage to fix this?
I have been speaking with the dev (ayysir) of ParanoidAndroid, 4.4beta1 for S2 had a bug with the kernel. The ROM wouldn't boot at all with the stock kernel, but would with any compatible custom kernel (Dorimanx, Gustavo, Apolo -correct versions of these).
The dev has uploaded a new build now which fixes the problem, so if you've managed to recover your phone the new build is safe to use (tested by me)
Hopper8 said:
@nguyenducanh did you manage to fix this?
I have been speaking with the dev (ayysir) of ParanoidAndroid, 4.4beta1 for S2 had a bug with the kernel. The ROM wouldn't boot at all with the stock kernel, but would with any compatible custom kernel (Dorimanx, Gustavo, Apolo -correct versions of these).
The dev has uploaded a new build now which fixes the problem, so if you've managed to recover your phone the new build is safe to use (tested by me)
Click to expand...
Click to collapse
Ok, tks u, i fixed my phone via odin, and i'm using c-rom v6.6, i will try newest pa now because i'm a big fan of pa
nguyenducanh said:
Ok, tks u, i fixed my phone via odin, and i'm using c-rom v6.6, i will try newest pa now because i'm a big fan of pa
Click to expand...
Click to collapse
Good job, I like to hear that someone recovered their phone using that guide and odin :good: make sure you re-download the ROM, you need the build on 0605, not 0604. 0604 is busted, but 0605 is good
Hopper8 said:
Good job, I like to hear that someone recovered their phone using that guide and odin :good: make sure you re-download the ROM, you need the build on 0605, not 0604. 0604 is busted, but 0605 is good
Click to expand...
Click to collapse
Ok, using 0605 now, and missing see through option
nguyenducanh said:
Ok, using 0605 now, and missing see through option
Click to expand...
Click to collapse
That's because of the new theme engine... I saw something on google+ about that. I think it's planned to be re-implemented but may take a while due to complexity..
Hopper8 said:
That's because of the new theme engine... I saw something on google+ about that. I think it's planned to be re-implemented but may take a while due to complexity..
Click to expand...
Click to collapse
I hope "see through" will come back in the next update
Haven't signed in to XDA since 2012 LOL. But anyway I have been seeing a few post from some users with a little problem after flashing a custom ROM. Mostly with an AOSP ROM (CM11, AOKP) Etc. This problem only seems to occur after taking the sprint KitKat OTA and then flashing TWRP with Auto Rec, Followed by flashing a custom rom. I've had this same problem when flashing CM11 to unlock my sprint variant for T-Mobile. The sound was completely gone.!!! Zip Ziltch!! No where to be found. Couldn't place calls because the call screen would go black and then come back with a call ended error. I've been searching for a solution for this for the longest and it seems like on every forum when everyone has this issue and needs help there is no response from any member. So I'm here to help in any way that I can. I found this solution after unlocking 3 G2's yesterday.
*I AM NOT RESPONSIBLE IF YOU SOMEHOW BRICK OR FRY YOUR DEVICE. BY FOLLOWING THIS GUIDE YOU AGREE THAT EVERYTHING STEP YOU TAKE IS ON YOU. YOU.!! THIS HAS BEEN TESTED ON 3 G2'S AND WAS CONFIRMED WORKING. I SUGGEST THAT NOOBS WAIT FOR A CONFIRMATION FROM A DEV BEFORE PROCEEDING. THANK YOU.
I AM GOING TO ASSUME YOU ARE BACK TO YOUR STOCK ROM BEFORE DOING THIS, IF NOT JUST GO INTO RECOVERY, DO A FULL WIPE AND FLASH THE ZIP.
Before you begin download the KitKat modem from this link h t t p : / / forums (dot) xda - developers (dot) com / showthread (dot) php?t=2705509 ( can't post links) and place the zip on the root of you internal storage.
STEP 1 - FLASH THE CUSTOM ROM OF YOUR CHOICE.
STEP 2 - AFTER FLAHSING DO NOT FLASH GAPPS JUST YET. BOOT INTO THE ROM AND COMFIRM THAT THE SOUND IS INDEED DEAD.
STEP 3 - TURN OFF THE DEVICE AND BOOT INTO RECOVERY.
STEP 4 - DO A FULL WIPE AND FLASH THE KITKAT MODEM YOU DOWNLOADED. I DIDNT FLASH GAPPS YET TIL AFTER I BOOTED UP AND CONFIRMED WORKING SOUND, BUT YOU CAN FLASH THEM IF YOU WANT *BE CAUTIOUS, IM NOT SURE IF IT WILL DAMAGE ANYTHING*
But after you boot back up do some sound checks. Place a call and you should now have working sound. Congrats!! You did it! I have done this method on 3 sprint G2's so far. Have not tried other variants but they all should work the same.
Androtopia12 said:
Haven't signed in to XDA since 2012 LOL. But anyway I have been seeing a few post from some users with a little problem after flashing a custom ROM. Mostly with an AOSP ROM (CM11, AOKP) Etc. This problem only seems to occur after taking the sprint KitKat OTA and then flashing TWRP with Auto Rec, Followed by flashing a custom rom. I've had this same problem when flashing CM11 to unlock my sprint variant for T-Mobile. The sound was completely gone.!!! Zip Ziltch!! No where to be found. Couldn't place calls because the call screen would go black and then come back with a call ended error. I've been searching for a solution for this for the longest and it seems like on every forum when everyone has this issue and needs help there is no response from any member. So I'm here to help in any way that I can. I found this solution after unlocking 3 G2's yesterday.
*I AM NOT RESPONSIBLE IF YOU SOMEHOW BRICK OR FRY YOUR DEVICE. BY FOLLOWING THIS GUIDE YOU AGREE THAT EVERYTHING STEP YOU TAKE IS ON YOU. YOU.!! THIS HAS BEEN TESTED ON 3 G2'S AND WAS CONFIRMED WORKING. I SUGGEST THAT NOOBS WAIT FOR A CONFIRMATION FROM A DEV BEFORE PROCEEDING. THANK YOU.
I AM GOING TO ASSUME YOU ARE BACK TO YOUR STOCK ROM BEFORE DOING THIS, IF NOT JUST GO INTO RECOVERY, DO A FULL WIPE AND FLASH THE ZIP.
Before you begin download the KitKat modem from this link h t t p : / / forums (dot) xda - developers (dot) com / showthread (dot) php?t=2705509 ( can't post links) and place the zip on the root of you internal storage.
STEP 1 - FLASH THE CUSTOM ROM OF YOUR CHOICE.
STEP 2 - AFTER FLAHSING DO NOT FLASH GAPPS JUST YET. BOOT INTO THE ROM AND COMFIRM THAT THE SOUND IS INDEED DEAD.
STEP 3 - TURN OFF THE DEVICE AND BOOT INTO RECOVERY.
STEP 4 - DO A FULL WIPE AND FLASH THE KITKAT MODEM YOU DOWNLOADED. I DIDNT FLASH GAPPS YET TIL AFTER I BOOTED UP AND CONFIRMED WORKING SOUND, BUT YOU CAN FLASH THEM IF YOU WANT *BE CAUTIOUS, IM NOT SURE IF IT WILL DAMAGE ANYTHING*
But after you boot back up do some sound checks. Place a call and you should now have working sound. Congrats!! You did it! I have done this method on 3 sprint G2's so far. Have not tried other variants but they all should work the same.
Click to expand...
Click to collapse
Hello, I have this problem on a Samsung Galaxy Epress GT 18730. Which modems would I have to use?
Are you running a custom ROM.? I can't really speak for the express. First you have to make sure the sound drivers are there. If they are then try and locate the latest modem. It might be hard to find since the express doesn't really get a lot of attention.
Sent from my XT1056 using XDA Free mobile app
toxious651 said:
Hello, I have this problem on a Samsung Galaxy Epress GT 18730. Which modems would I have to use?
Click to expand...
Click to collapse
Non of the above link cause they're meant for the g2 so not the express. Try to find modems in the galaxy express thread if there are any but just dont flash this modem, dont even try it. It would definetly not work.
Androtopia12 said:
Are you running a custom ROM.? I can't really speak for the express. First you have to make sure the sound drivers are there. If they are then try and locate the latest modem. It might be hard to find since the express doesn't really get a lot of attention.
Sent from my XT1056 using XDA Free mobile app
Click to expand...
Click to collapse
Yes i'm running cm11. But no one on the cm11 thread knows how to fix this rare problem. I brought my android back to the original firmware 100% and this problem is still there
. I think only a modem can help me, but I don't know where to get one.. One that will bring my sound back.
wulsic said:
Non of the above link cause they're meant for the g2 so not the express. Try to find modems in the galaxy express thread if there are any but just dont flash this modem, dont even try it. It would definetly not work.
Click to expand...
Click to collapse
What galaxy express thread? I'm new to xda and I find it hard to navigate around. >_<
Sent from my GT-I8730 using XDA Free mobile app
toxious651 said:
Yes i'm running cm11. But no one on the cm11 thread knows how to fix this rare problem. I brought my android back to the original firmware 100% and this problem is still there
. I think only a modem can help me, but I don't know where to get one.. One that will bring my sound back.
What galaxy express thread? I'm new to xda and I find it hard to navigate around. >_<
Sent from my GT-I8730 using XDA Free mobile app
Click to expand...
Click to collapse
Maybe there is no thread for express yet idk for sure since i am on tapatalk now :/,
Toxious if you already flashed your phone back to stock with odin then it could be an hardware problem maybe cause odin flashed also modem and the other stuff as far as i know so...:crying:
wulsic said:
Maybe there is no thread for express yet idk for sure since i am on tapatalk now :/,
Toxious if you already flashed your phone back to stock with odin then it could be an hardware problem maybe cause odin flashed also modem and the other stuff as far as i know so...:crying:
Click to expand...
Click to collapse
Hmm.. well if Odin should bring back everything, is there a problem I did something wrong during flashing back to stock firmware? What are the exact steps I should take to get back to stock firmware?
toxious651 said:
Hmm.. well if Odin should bring back everything, is there a problem I did something wrong during flashing back to stock firmware? What are the exact steps I should take to get back to stock firmware?
Click to expand...
Click to collapse
Did you flashed the whole system.tar or whut idk how it goes by samsung anymore :9. Can you like extract from the tar.md5 and flash the modem.bin in the Phone section if I am right. You can just extract the things from the tar.md5 by renaming tar.md5 to tar.
But i believed that if you flash the whole Tar.md5 thing from Samsung that it flashes all files inside
Just try to extract the modem.bin from the tar.md5 and flash it in phone
wulsic said:
Did you flashed the whole system.tar or whut idk how it goes by samsung anymore :9. Can you like extract from the tar.md5 and flash the modem.bin in the Phone section if I am right. You can just extract the things from the tar.md5 by renaming tar.md5 to tar.
But i believed that if you flash the whole Tar.md5 thing from Samsung that it flashes all files inside
Just try to extract the modem.bin from the tar.md5 and flash it in phone
Click to expand...
Click to collapse
I got it fixed!! Running CM11 perfectly too!!
Installed a random firmware and the sound worked lol.
toxious651 said:
I got it fixed!! Running CM11 perfectly too!!
Installed a random firmware and the sound worked lol.
Click to expand...
Click to collapse
Odd random firmare?!?! But okay good to hear you fixed it
wulsic said:
Odd random firmare?!?! But okay good to hear you fixed it
Click to expand...
Click to collapse
Lol yeah, a Netherlands one. Thanks for taking the time out to check on my replies to this thread sir!
I got this problem on my LS980 today.
Let me just quote my post from the rom thread:
"I got no sound after flashing this rom on my LS980. Came from Cloudy's rom, full wipe, flashed rom, gapps and the bloat removal script from the gapps thread. No sound, anywhere-not in youtube, not in music player, not in settings, can't be a hardware issue since I had no problems on previous rom and it doesn't work with headphones, too."
I wanted to flash the modem, but the link is dead ;( any ideas what to do? I'm still on custom rom.
EDIT: back-up from ZVE stock kit-kat solved the problem. Now, what should I do to flash custom rom and have working sound..?