Does anyone know if a stand (could serve as a case too) that would be sturdy enough to allow me to also draw on the tablet while propped up?
I keep my Flyer on my desk and use it a lot for note taking while on Skype calls, etc. and it would be nice to prop it up and write on it instead of holding it.
So I guess also the degree of angle it would be propped up at would ideally be adjustable or at least lower for being able to put the downward pressure on it as well as not feel like you're writing on a chalkboard or something at an awkward angle.
Ideas? Has anyone done the same thing and found a good stand? I'm scouring Amazon...but it's hard to tell by just looking at pictures. I know the intended purpose of propping up the tablet is for viewing/watching movies and not so much utility uses.
I'm also hoping to find a non-leather case...I think leather cases on electronics are just ugly =)
This was one that I was curious about.... http://www.amazon.com/gp/product/B0..._m=ATVPDKIKX0DER&pf_rd_r=19RVNBZXHECA55BMGZK5 ... but there's only one review which doesn't have any details.
Thanks in advance for any suggestions.
I say get the one you saw on Amazon. Return if it doesn't work.
The one from Amazon should be strong enough.
I have that Navitech stand. You can write on it as long as you don't write too hard, particularly in the corners. However, it doesn't fold down that flat, the lowest it will go is maybe a 45 degree to the table. To me that's not a comfortable writing angle, although it's fine for reading.
Any other stand suggestions? I'm starting to have the urge to get one, or maybe ghetto make one at home....heh guess I could go the lego route!
Related
I've been looking for a solution that would offer an easier way to hold the TF with one hand and still allow full 360 rotation. I came across these two on Amazon and I was wondering if anyone here has tried them. Here's the quick pros & cons that I can see:
Hand-e-holder: http://amzn.to/jQ5jzc
+ Hold with one hand / 360 rotation
+ Comfortable wide neoprene backing for your hand
+ Size doesn't matter Uses an adhesive disc to mount one side of the holder to the back of your tablet - so it should work with any tablet out there
- I see the adhesive as a con also - not sure I want to stick anything on the back of my TF. Plus, once it's stuck on there it's semi-permanent in that you can't take it off one day and then stick it back on the next (you'll need to buy a new disc for $6)
- Price is kinda high IMO at $40
Video (47 seconds in): http://video.foxnews.com/v/966135816001/gadget-gift-guide-for-dads/
HeloStrap: http://amzn.to/jKnO39
+ Hold with one hand / 360 rotation
+ Comes in multiple colors (red, green, blue, black)
+ Price: Only $25, so $15 cheaper than the Hand-e-holder above
+ Attaches to your tablet via elastic bands or grips so you can easily attach or remove it. Also will work while your table is in a sleeve.
- "Officially" only supports ipad, ipad2, & Xoom. I did a comparison and while the TF is longer on one side, it's shorter on the other. So I jumped into my wayback machine (and google) to figure out the "hypotenuse" and it looks like the TF is ~20mm longer. From what *I* can see of the HeloStrap in the images it certainly looks like the elasticity could accommodate that extra 20mm.
- The part of the HeloStrap that your hand fits into doesn't look as comfortable as the Hand-e-holder. Actually, that was the only con mentioned for it on the Amazon reviews - that it could be a tad more comfortable. But it also wasn't bad enough for folks to warrant it any less than 4 stars.
Video: http://www.youtube.com/watch?v=IpZ4-pdq3ag
I put in an order for the HeloStrap (black) because I like that I can pop it on and off easily - with or without my TF in the sleeve. I'll post back here when it shows up and let folks know how it works out.
I'd still like to hear from anyone else that's tried one of these - OR that has found another option that allows for the 360 rotation.
Please post up how you like it when you get it.
I smell a broken Transformer...
frosty5689 said:
I smell a broken Transformer...
Click to expand...
Click to collapse
LOL
Ya thing so?? Why? The HeloStrap seems to hold fine on the iPads - and it will be a bit more snug on the TF.
Even on the other one, the adhesive seems pretty tight.
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Unfortunately neither one was Amazon Prime so it may take a several days to get here. Hopefully before the weekend though and I'll be sure to report back!
Never even knew anything like these existed. Of the two I like the HeloStrap more... really tempted to buy one, but I've wasted too much money lately so ill wait for a review.
pogul said:
I'm not going to be doing any BMXing with it - I'm just looking for easier one-handed holding while couch surfing and swyping with the other..
Click to expand...
Click to collapse
Exactly. Worst case scenario for me would be it falls onto me lol.
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
I look forward to impressions
skeeterpro said:
Hmmmm...imagine what happens when one swipes at some annoying flying bug....methinks major fail?
Unique but pass.
Click to expand...
Click to collapse
What? You'd likely shatter your pad doing that no matter what.
I went a similar but slightly different route with the Padlette (padlette.com) which I bought off of Amazon. It's not as fancy as the other options, but it's pretty heavy duty and I have little to no fear about it breaking or slipping off. You can either hold it in one hand or you can slip you hand in behind.
In either case, an option worth looking at.
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Also, a question about the Helo, Do the straps at the corners mark/scratch the tablet trim or screen?
Excellent FIND...and I think I am tending towards ordering one too....
I will do more research as well and keep you'al updated...
Good luck with yours.
Regards,
Misfitz
nv88 said:
How comfortable is the padlette on your hand? Does it feel tight after an hour or two holding the Transformer? Is it equally comfortable in portrait and landscape? Also, how is the fit on the tablet?
Click to expand...
Click to collapse
I find it very comfortable. I was participating in an event this weekend that required that I hold the pad for roughly four hours and I did so with no problems. You can either grab it with your fingers (my preferred method) by hooking them around the straps, or you can simply slide your hand in behind.
Because it's at the same angle in either portrait or landscape it's equally easy to hold it in either configuration. I also like that it's removable without leaving any evidence that it was there. The only (minor) problem I've seen is that I have to have it oriented in SW to NE because in the NW to SE direction it covers up the volume rocker.
Thanks. I'm very interested in the padlette... sounds like it may be worth $20.
Sorry for the delay in following-up. I wanted to put a short video up, but my Sony Vegas just hasn't been cooperating with me.
I received the HeloStrap last Thursday and finally had a chance to play with it last night.
Overall, I think it's great. I definitely agree with the 4/5 stars rating on Amazon. The only con being that the hand part of the strap could have been more comfortable. It's not horrible by any means. You just notice it when you first start using it, but then quickly forget about it.
It still looks like the Hand-e-holder would win in the comfort category, BUT - I prefer the HeloStrap because of the lower price and the fact that I can slip it on or off easily vs having to semi-permanently stick the Hand-e-holder on. If I didn't have the Asus sleeve for my TF that probably wouldn't be as much of a factor.
BTW, the HeloStrap gives a nice snug fit on the Transformer with or without the sleeve. It's snug, but not so tight that it would be a concern (this is what I wanted to show in the video). It definitely feels very secure - I don't see the TF "falling out" of it or anything.
It certainly made the couch surfing MUCH more enjoyable last night which was my primary goal!
If I didn't have the sleeve I would be much more tempted to try out the Hand-e-holder, but the HeloStrap is the one that gives me the option of using it easily with the sleeve or without. Now i just need to see if my wife can come up with some idea for making the hand part a lil cushier!
I'll take another crack and getting a video together and will post that as soon as I can.
I finally got around to shooting a quick video of the HeloStrap on my TF. Hopefully this will give you an idea of how it fits - with and without the sleeve.
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
lost101 said:
http://sleeve360.com/
This looks great; wonder if it would fit the Transformer.
Click to expand...
Click to collapse
Not sure, but given that it's a full sleeve/case made to fit the ipad, I don't think it would work for the TF. The dimensions are too different.
The HeloStrap just needs to stretch diagonally from one corner to another - whereas that sleeve360 would have to fit all 4 corners.
Let us know if you give it a shot though!
That extra tension on the corners of my Transformer would amplify the screen bleed issue I'm having by 200%. Looks cool though.
Sent from my Transformer TF101 using Tapatalk
Know what - I think you can stick this to the outer part of your folio and use it. So that the TF remains pristine.
Even better - with the Techtree stand, you can create your own 360 degree rotating hand holder.
I was at Fry's today and decided to look at cases. They had none for the Asus but they had one for the Toshiba 10.1 Tablet. I did not have the EEE with me but I went ahead and got it. List was $59.99 but they matched online price so I got it for about $42. Here it is:
http://www.amazon.com/Toshiba-Thriv...?s=electronics&ie=UTF8&qid=1309054174&sr=1-11
So far I love it - it fits well and has access to all the important stuff (except camera). I don't know if I will keep it. I also love the quality and the fact that it rotates 90 degrees from Portrait to Landscape.
It does say TOSHIBA on it but that is also a good thing - if it said ASUS there would be a much bigger chance that it would get stolen.....
Anybody else have this?
i bought a case for the Toshiba too from best buy, $40...lil different from yours but made for the same tablet...i am happy with it...it works just fine...excellent build quality too...no camera access without sum modifying but overall just wat i needed...
http://www.toshibadirect.com/td/b2c/adet.to?poid=512069
MasterJack said:
http://www.amazon.com/Toshiba-Thriv...?s=electronics&ie=UTF8&qid=1309054174&sr=1-11
So far I love it - it fits well and has access to all the important stuff (except camera). I don't know if I will keep it. I also love the quality and the fact that it rotates 90 degrees from Portrait to Landscape.
Click to expand...
Click to collapse
I really like that! been looking for a case which uses bumpers to hold the tablet. How well does it actually fit (is it slightly loose, too tight that it bends the clips slightly or just right?) and are the lengths good?
Any chance you could post pictures because I would really love to get this if it fits good!
I also forgot to ask if the holes for docking the keyboard are unobstructed?
masterjack said:
it does say toshiba on it but that is also a good thing - if it said asus there would be a much bigger chance that it would get stolen.....
Click to expand...
Click to collapse
lol lol lol lol
Definitely interested in seeing pictures of this. I bought the case that Staples has, but I'm not satisfied with it at all.
Bumping this thread. Has anyone else tried this case? Have any pics to share?
Looking at the specs, the Toshiba is 6mm taller (in landscape mode). Do the clips hold the TF securely? Thanks.
I just received it...very disappointing.
Hey everyone. I just wanted to let you know that I ordered this from Amazon thinking it would be a good fit. It was somewhat close, but it does not hold the TF securely. I could easily see the tablet sliding all the way out and hitting the floor if you were not paying attention. In fact, when in portrait mode the tab slides out on most of the angles. There are some fairly big gaps.
I have uploaded some pictures, so hopefully they will illustrate some of the issues.
It is also poorly put together. The tab that snaps in place was loose. I barely pulled on it and it came out somewhat such that now it is off angle and no longer lines up naturally to secure the tab.
On the plus side, it would leave openings for accessing anything you needed to and also folds down flat so you could just use it in your hands.
Bottom line, I am sending it back.
Hope this helps others who where/are interested.
^^^
Feel bad for you man, never understood the attraction with the clip type cases, those things are made of plastic, one involuntary quick movement and this thing could send the Tf flying. The wrap around cases are much better at overall protection.
It's not a big deal. I know that I am picky and was fairly sure I would be sending it back. I didn't have enough experience with these to even know about the clip type cases, so I am glad that I now know to avoid them in the future. I mostly just wanted to let the few people that had bumped this post know that the product was maybe not so good and provide the pictures that had been requested.
I actually like the clip style. I just wish there were options similar to those that the iPad has, where the back is basically a plastic shell that clips. My wife has a Targus case for her iPad2 that does this. Personal preference, I guess. I wouldn't be against a non-clip case if it was very well implemented. I picked up the Solo case from Staples as a temporary measure until some more options are available. Works OK, but I really don't like the corner-cover means of securing the tablet.
Just noticed this on eBay. Looks pretty substantial and possibly an acceptable option for the non-existent desktop stands from Asus.
Ordered one. Will post up some pictures once I get it.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140583405716&ssPageName=STRK:MEWAX:IT
FWIW, there are a handful of other generic stands like that on Amazon too. Most of these stands that are marketing for iPads will work fine too.
True enough. First one I've encountered while waiting for Asus!
I've bought a self-made in a german-forum (android-hilfe.de).
If somebody is interested i will send the link (At the moment it's not possible to post --> < 8 posts)
I've got these:
Folding wire stand
...and:
Folding milled aluminum stand
I like the first one better because it's super light and super adjustable. But you really have to tighten the thumb nuts if you don't want it to slowly collapse.
The second one claims to be made of aluminum, but its as heavy as brass or steel and it's a noticeable addition to a shoulder or backpack.
I am using one of these i got at burlington for like $6. use for the kitchen. Only issue is the angle could be back alittle bit more.
I think I will go and play around with some card tonight/over the weekend and see if I can come up with an Origami/pepakura-style stand (dual-angle of course) which I can make from thin Plastic-card. I have access to a greeting card creaser and would really like a light and portable stand that gives the ability to plug in the charge cable. If I get anything worth taking a snap of I will stick it up, with plans of course.
amazon.com/ gp/ product/ B000CKVOOY
This is a magnificent stand that I bought two of. It folds away to an easily storable size and has plenty enough flexibility and stability to be used in multiple orientations. The only negative is that the charging plug won't fit if you orient the tablet right-side-up though this is easily solvable if you invert the tablet.
I just found this on amazon and bought one for myself. Looks like it will hold the Transformer and Dock perfectly.
http://www.amazon.com/CaseCrown-Che...EM/ref=sr_1_59?ie=UTF8&qid=1316128965&sr=8-59
Only $0.01 with $4.99 Shipping (3-5 days)
Dont know how long the price is good for, better get one quick!
edit: It sure looks like polyurethane, but I guess their description says it has a "canvas like" stylish exterior. Not PU Leather like i assumed.
Update: Just got it in the mail. Took about a week or so, not too bad. However I can't say the same for the case. In my opinion its total crap.
The material on the outside of the case is anyones guess. It looks and feels like a combination of canvas and polyurethane faux leather. The whole thing is monstrous, measuring in at 12" wide x 11" long x 1" thick (when compressed and empty) You can only fit the Transformer in the case in one direction because of the velcro placement. Once you get your tablet inside the case it does feel like it would be very safe. The extra 2-3 inches of fabric hanging from either side of the device adds some extra protection but also makes the whole thing absurdly large. And to top it off the whole thing smells very strongly of DRY ERASE MARKERS!
All said and done 5 bucks was overpaying for this. They probably have them marked so low because nobody buys them. But if you absolutely need a case and your local Value Village Thrift doesnt have something better, give it a try. Just make sure to wash it first.
P.S. Im not going to bother putting up any pictures unless you guys really want them. Im hoping to pawn this thing off on one of my brothers if I'm lucky.
Pretty cheap, but it kinda ugly and seems like it would be a hassle getting you tablet in and out.
Are those flaps supposed to hold papers or something? I'm trying to imagine bringing my tablet into the office and trying to "unpack" it from that case. Seems a little bulky from the pictures.
What holds it closed? I don't get it? A magnet? It does seem ugly and might an indication why it's so cheap.
Tubular said:
What holds it closed? I don't get it? A magnet? It does seem ugly and might an indication why it's so cheap.
Click to expand...
Click to collapse
Looks like a closer look at one of the pics reveals the answer: Velcro. I thought they were pockets for papers or something but they are strips of velcro, which must be what holds it shut.
Looks like a decent case for travel and storage.
I want to start reading some books on my tablet, but due to the large size and small bezel it's awkward to use. Any recommendations for a case with a handle or strap to make things easier?
I haven't seen any cases with built in straps, but something like this might work for you:
http://www.amazon.com/Padlette-in-Black/dp/B004DLUZ4I/ref=pd_sim_e_2
I haven't used it myself, but it looks like it could be an easy way to hold the Prime, as you can just slide your hand under the strap. It should also be able to stretch over any folio case you might choose to use.
I use the Sikai microfiber case, and while it doesn't have a strap I find that its soft grippy texture makes it much easier to hold the Prime for extended periods. It also offers excellent protection for the tablet.
http://www.amazon.com/Sikai-Microfi...1?s=electronics&ie=UTF8&qid=1339617190&sr=1-1
That looks interesting, but $20 for a elastic band seems kind of ridiculous to me. If I can't find anything better though I may give it a shot.
Mine just came in today, so I cannot pass full judgement but so far so good.
http://www.amazon.com/rooCASE-Slim-Fit-Adjustable-Transformer-10-1-Inch/dp/B0079MAUNE
Something like this?
http://www.censuspc.com/product-pr-12059.html
Disregard.
richardmkovach said:
Mine just came in today, so I cannot pass full judgement but so far so good.
http://www.amazon.com/rooCASE-Slim-Fit-Adjustable-Transformer-10-1-Inch/dp/B0079MAUNE
Click to expand...
Click to collapse
thats the one i'm currently using
overall the case is pretty good but if you put it on a unleveled surface, the stand won't stand very well as the tablet doesn't sit in the nudge very well
other then that i have no complaints about it
been using it for about a month or so now