Can you? Because my Streak Gets Stuck on Dell logo
or it gets in a bootloop and I want to install a new rom hopefully that works
I was running Streak Stood 2.0
I can boot into Clockwork
Streakmod is what has been especially written for the Streak... look for it in the development threads
Related
ok so i was trying to downgrade my dell streak to 2.1 so i could go to 1.6 and after i flashed it i got the dell logo and a blank black screen. i cant get into my custom recovery and everytime i press upgrade from .pkg it goes to the black screen. i believe it might be bricked because nothing is working. any help would be greatly appreciated thanks!
sounds like you have flashed a custom recovery... try going back to that site and download the alternate recovery. Try flashing one of these custom recoveries, if one gets you the black screen then the other one should get you through.
http://forum.xda-developers.com/showthread.php?t=754563h
no. it doesnt have anything to do with the custom recovery when i turn the phone on it shows the dell logo and goes to a black screen. i have the alt version of the custom recovery from that thread but not even that will show up. all of this happened when following the upgrade downgrade guide by homeiss please help
dkwelton said:
no. it doesnt have anything to do with the custom recovery when i turn the phone on it shows the dell logo and goes to a black screen. i have the alt version of the custom recovery from that thread but not even that will show up. all of this happened when following the upgrade downgrade guide by homeiss please help
Click to expand...
Click to collapse
Boot into fastboot mode
flash the stock recovery
flash the official update.pkg
fixed
Haha I figured this out as soon as I posted that
Sent from my Dell Streak using XDA App
dkwelton, can you please explain exactly what you did to fix this?
Thanks,
Christopher
i went to http://android.modaco.com/content/d...to-get-your-streak-back-to-factory-condition/ and downloaded the stock recovery and flashed it with fastboot then i put a stock o2 2.1 rom on it
I have a Dell Streak! I have done everything that Modaco's Dell streak roms page has instructed. I just cant get it. I have Rom Manager, I have flashed clockwork recovery. its just not working. Anybody have any advice? HELP!
paulsendrake said:
I have a Dell Streak! I have done everything that Modaco's Dell streak roms page has instructed. I just cant get it. I have Rom Manager, I have flashed clockwork recovery. its just not working. Anybody have any advice? HELP!
Click to expand...
Click to collapse
I'd go fully back to stock and start again if i were you.
Flash stock recovery
Flash stock 1.6
Flash clockwork recovery
Flash paul's 2.1 (I think this is necessary, i can't remember)
Flash 2.2
Done
Also, what's ROM Manager? Oo
Hello,
I rooted my phone with z4root, and then installed SuperUser and ROM Manager v4.2.1.0.
I flashed ClockworkMod 2.5.0.7 (selecting Dell Streak version). When I try to "reboot into Recovery" (using ROM Manager), the phone will reboot to the startup screen, not to ClockworkMod Recovery screen. If I try to boot to recovery by holding the VOL + and -, it will reboot to the stock recovery screen.
I bought this Streak USED, and I think that the previous owner had flashed a 2.2 version on it before the official upgrade. Is there a way to reset this back to the original settings? I would like to use StreakDroid 2.0.0. Am I missing a critical step in the procedure? Thank you all for your help in advance.
Android Version 2.2
Baseband - GAUSB1A130500-US
Kernel 2.6.32.9-perf
OEM - GAUSB1A130500
Build 10688
Stop using rom manager, qdltool the phone, then try again. Rom manager has caused a lot of problems for a great deal of people I know.
shinryu77 said:
Hello,
I rooted my phone with z4root, and then installed SuperUser and ROM Manager v4.2.1.0.
I flashed ClockworkMod 2.5.0.7 (selecting Dell Streak version). When I try to "reboot into Recovery" (using ROM Manager), the phone will reboot to the startup screen, not to ClockworkMod Recovery screen. If I try to boot to recovery by holding the VOL + and -, it will reboot to the stock recovery screen.
I bought this Streak USED, and I think that the previous owner had flashed a 2.2 version on it before the official upgrade. Is there a way to reset this back to the original settings? I would like to use StreakDroid 2.0.0. Am I missing a critical step in the procedure? Thank you all for your help in advance.
Android Version 2.2
Baseband - GAUSB1A130500-US
Kernel 2.6.32.9-perf
OEM - GAUSB1A130500
Build 10688
Click to expand...
Click to collapse
You don't need to go back to the original settings if you plan on using a custom ROM, it's a waste of time....
You should've read through more threads and found out ROM Manager doesn't play well with the 5" Streak. Anyway, you need to look for the thread under Streak Android Development called Streakmod Recovery and download that recovery image...
Secondly you need to look for the "fastboot" folder download and get that on your computer so you can flash the Streakmod recovery image.
Thirdly you need to download the baseband you wanna use.... I think most have gone from the 318 baseband that was engineered to work for StreakDroid 1.9 to the 351 baseband and it's working for StreakDroid 2.0 also. (if you are just getting started I would personally suggest using StreakDroid 1.9 until DJ Steve has worked the kinks out of 2.0)
Aside from all I just told you you should look this link up to make sure you get all the correct drivers installed:
http://streakdroid.com/?page_id=92
This is also a very helpful BUT instead of using Clockwork Mod Recovery you will be using StreakMod:
http://forum.xda-developers.com/showthread.php?t=872214&highlight=flash+amss
Get this reading done and then start tinkering, it'll save you a lot of head ache.
I used to freak out when my Streak would take longer than normal to boot or all of a sudden reboot or something like that.... Now I've learned enough to where I'm not scared to tinker and do about anything to it because I've learned how to get it back
shinryu77 said:
Hello,
I rooted my phone with z4root, and then installed SuperUser and ROM Manager v4.2.1.0.
I flashed ClockworkMod 2.5.0.7 (selecting Dell Streak version). When I try to "reboot into Recovery" (using ROM Manager), the phone will reboot to the startup screen, not to ClockworkMod Recovery screen. If I try to boot to recovery by holding the VOL + and -, it will reboot to the stock recovery screen.
I bought this Streak USED, and I think that the previous owner had flashed a 2.2 version on it before the official upgrade. Is there a way to reset this back to the original settings? I would like to use StreakDroid 2.0.0. Am I missing a critical step in the procedure? Thank you all for your help in advance.
Android Version 2.2
Baseband - GAUSB1A130500-US
Kernel 2.6.32.9-perf
OEM - GAUSB1A130500
Build 10688
Click to expand...
Click to collapse
I don't think rom manager works with the streak
Disregard, it's volup+voldown+power button... too much mountain dew and not enough sleep. Please delete this thread
Hey all, I need some help with my streak5. I flashed it to base 2.2.2, then the latest streakmod, and then installed streakdroid 1.9.0 via streakmod. My install.txt was
Code:
tabmail
bios
volboost
Streakdroid looks fantastic and definitely works fast than stock froyo, however I can't seem to get back into recovery. When holding power+volup on reboot, the screen stays black, and in order to boot up after that I have to first remove and replace the battery. After replacing the battery, the phone once again boots up just fine into streakdroid, but trying to boot into recovery still gives me a black screen.
Is this an incompatibility between streakmod and the streakdroid 1.9.0 bios?
Any help is appreciated!
Regards
edit----
android 2.2.2
baseband 130500
kernal 2.6.32.9-DJ_Steve-BFS-CFQ-KGSL2D-Vol-OC
OEM 190
Build Streakdroid 1.9.0
Help!! my Dell venue Got Bricked. i installed a custom rom and it run successfully. I changed my font then rebooted my phone then suddenly i got stuck in boot logo. I tried to reformat it and nothing happened. Please help me how to unbrick my phone. I havent unbrick any phone this is my first time. Im begging guys my phone is rooted.
Try to reflash the rom by booting into recovery.
Sent from my Dell Venue using xda premium
dell venue custom ROM installation
I want to Flash my Dell venue with CM9 custom ROM . I downloaded the ROM and tried to flash it, But i`m getting a error the Encrypting failed. Can anybody help me with the complete flashing guide.
Thanks in Advance
Even I bricked my Dell Venue, Now I am stuck on SW Upgrade from update.pkg screen it doenst go beyond this. I tried flashing custom recovery, dell recovery using fastboot.
I have installed custom CM9 from following link
http://forum.xda-developers.com/showthread.php?t=2002361
It was working fine but I wanted to update libs.zip so I can able to use internet over this phone. Now not able to flash it.
Any help?
Hello Guruj,
Any help? please :crying::crying::crying: