I've recently got myself a vpn account with a US vpn server. I can connect fine from my desktop always, and only when I'm on wifi from my SGS 2. I don't think it's software related, because I can connect on wifi, so in theory (I think) I should be able to do so over 3G. Am I right to suspect that T-Mobile blocks or does not support the service? Is there a work around for that? Not that it's terribly important, just wondering.
I currently run CM7 nightlies and never managed to get this to work, never had the chance to try it with stock rom.
Thanks
What error do you get when trying on 3G? I can't even connect over WiFi...
This is the error I get;
Server hung up, The username or password that you entered could be incorrect, Do you want to try again?
Username & password are ok. I know that cause it works when on wifi
.
anyone knows the reason?
Thanks
ioluas said:
This is the error I get;
Server hung up, The username or password that you entered could be incorrect, Do you want to try again?
Username & password are ok. I know that cause it works when on wifi
.
anyone knows the reason?
Thanks
Click to expand...
Click to collapse
Possible blocked ports on the Tmo network?
Related
Has anyone got VPN connectivity working with DCD 3.2.5? I have been trying for hours with no luck. Every time I try to connect I just get the generic unable to connect message (VPN Server problems. Verify your username and password..... I do know its not a user name / password issue. I set the VPN up and administer it. Its a ClarkConnect Community Edition Firewall Router 4.3.
I can however use the phone with Internet Sharing and connect to the same VPN end point with my laptop. I know the VPN is working.
Any one have any experience with this?
scrosler said:
Has anyone got VPN connectivity working with DCD 3.2.5? I have been trying for hours with no luck. Every time I try to connect I just get the generic unable to connect message (VPN Server problems. Verify your username and password..... I do know its not a user name / password issue. I set the VPN up and administer it. Its a ClarkConnect Community Edition Firewall Router 4.3.
I can however use the phone with Internet Sharing and connect to the same VPN end point with my laptop. I know the VPN is working.
Any one have any experience with this?
Click to expand...
Click to collapse
I'll be honest. I haven't really tried yet, but I am interested in getting this working myself, as I need to set it up; in addition to somehow getting this damn thing to connect to my school's network - which it has refused to for many weeks now.
scrosler said:
Has anyone got VPN connectivity working with DCD 3.2.5? I have been trying for hours with no luck. Every time I try to connect I just get the generic unable to connect message (VPN Server problems. Verify your username and password..... I do know its not a user name / password issue. I set the VPN up and administer it. Its a ClarkConnect Community Edition Firewall Router 4.3.
I can however use the phone with Internet Sharing and connect to the same VPN end point with my laptop. I know the VPN is working.
Any one have any experience with this?
Click to expand...
Click to collapse
Did you try using the kitchen and enabling the Enterprise IPSEC checkbox? It's the first item on the list. I assumed this was for those who needed VPN connections, so have not used it myself personally.
BTC
BillThyCat said:
Did you try using the kitchen and enabling the Enterprise IPSEC checkbox? It's the first item on the list. I assumed this was for those who needed VPN connections, so have not used it myself personally.
BTC
Click to expand...
Click to collapse
yep you need that for IPSEC vpn, but PPTP vpn would work without it.
BillThyCat said:
Did you try using the kitchen and enabling the Enterprise IPSEC checkbox? It's the first item on the list. I assumed this was for those who needed VPN connections, so have not used it myself personally.
BTC
Click to expand...
Click to collapse
Yes. Im going to flash back to a stock ROM later today and test.
I'll post the results.
DCD have you ever got PPTP to work?
scrosler said:
Yes. Im going to flash back to a stock ROM later today and test.
I'll post the results.
DCD have you ever got PPTP to work?
Click to expand...
Click to collapse
Telus ROM can authenticate just fine. Hmmmm. DCD Any thoughts?
PPTP VPN works
Here is what I did:
Configured the VPN connection.
Create a nework exception for a valid DNS name or use wildcards:
*.myvpnconnection.com
Anything you go to in that domain will use the VPN. IE seems to be the only thing that will initiate the connection.
It sounds like you might have something wrong on the server side.
MM
I just setup mine to use the vpn into my office and it worked slick as "stuff"... but we use a MS VPN server with AD...
I'm able to use VPN on 3.2.5 (stock, not cooked in kitchen) It works, but often time I have to soft reset before it will let me connect. Windows even suggests it... I haven't figured out a way around this when it happens, other then to soft reset.
Also I'm having a problem where VPN locks up the phone if I leave it connected, and the phone goes into lower power mode. It won't wake up with power. I have to soft reset.
Lastly, I'm trying to figure out the fastest way to actually launch the connection. It seems horribly buried / inefficent, the way I'm doing it:
I'm going to Start -> Settings -> Connections Tab -> Connections Icon -> Under the VPN Connection hitting "Manage Existing Connections -> VPN Tab -> Selecting the VPN Connection and "right clicking (hold until context menu pops up) and hitting "Connect".
Anyone know of a faster way?
Thanks in advance!!
PPTP and L2TP work fine here. I do have an issue where if I leave the connection live and the device goes to sleep it doesn't wake up and requires a soft reset. It's been like that for a number of revisions. Other than that it works fine.
Data connecitity does not work since yesterday. Was using Shep's ROM, tried NATF's 4.7 same result. Get a "cannot connect for unknown reason" error. Talked to att they asked me to remove the wap username and password in the connection settings, saying its not needed. Anyone has seen this problem? All the ROMs seem to have a built in username and pwd for media net.
Thanks
Thanks for the clue. Removing the user and pass worked for me. I developed the same problem yesterday as well and figured that someone here at xda would know what's going on.
does this work for anyone? i have never been able to on my 101
I have no problems connecting to my unsecured network at home (don't worry, there's only maybe five houses on my street that could even reach it!) How far can you get in connecting? For example, will it see the network when you scan? Will it fail when you try to select it? Will it select, but not have a web connection?
lbhocky19 said:
does this work for anyone? i have never been able to on my 101
Click to expand...
Click to collapse
Never had a single issue. Are you sure it's not Adhoc or something? What channel is the AP?
i've been unable since i first bought it... and ive updated firmware and done full restores before.
it connects fine but doesn't actually have internet once it does. happened on a few different networks but most notably would be my phone when i made it a hotspot it would work fine if i put a password on but wont if i do it unsecured
lbhocky19 said:
i've been unable since i first bought it... and ive updated firmware and done full restores before.
it connects fine but doesn't actually have internet once it does. happened on a few different networks but most notably would be my phone when i made it a hotspot it would work fine if i put a password on but wont if i do it unsecured
Click to expand...
Click to collapse
I have to reconnect to my phone sometimes when using hotspot, seems like the routing breaks every once in a while, but I connect to multiple unsecured networks(actually using radius auth, but that won't change anything) on a regular basis. Sorry, I can't really think of anything that would cause that even after reformatting. I'd start looking at the dmesg logs for an error.
The subject says it all. Has anyone gotten the Cisco AnyConnect for Rooted Devices to work on an AT&T Motorola Atrix?
Seems that no matter what I do, I get:
Could not connect to server. Please verify internet connectivity and server address.
I did download tun.ko and successfully insmoded it ,and verified it was loaded with lsmod, but, I still get the error above.
And yes, I have internet connectivity, and I have checked and re-checked the server address.
Any other thoughts or ideas? Anyone else gotten this to work?
Thanks,
-Mark
I am also interested as we have a Cisco 3000 Concentrator for our VPN. I have not had any luck myself. Now that I did the OTA to 2.3.4, I guess I have to go through the tun.ko process again.
mbobak said:
The subject says it all. Has anyone gotten the Cisco AnyConnect for Rooted Devices to work on an AT&T Motorola Atrix?
Seems that no matter what I do, I get:
Could not connect to server. Please verify internet connectivity and server address.
I did download tun.ko and successfully insmoded it ,and verified it was loaded with lsmod, but, I still get the error above.
And yes, I have internet connectivity, and I have checked and re-checked the server address.
Any other thoughts or ideas? Anyone else gotten this to work?
Thanks,
-Mark
Click to expand...
Click to collapse
exact thing happening for me. asked one of the IT guys and he said they don't have it set up for anyconnect access.
My phone is HTC 620G but I think its not important because I've factory reset it and it didnt help. The problem is I'm connected to wifi but I can't access to internet. Sometimes I can but its way too slow, way way slow so as I said I formatted the phone but it didnt help. Waiting for your help
edit: I dont have any problems at other devices like laptop or phones but my phone...
edit2:When I connected to wifi near any device, the other devices internet connection got lost, its been so annoying i wanna get rid of this issue immediately
2.4 or 5ghz? What encryption ie wpa wep open? Can other devices connect to the wifi? Is the channel congested?
Edit I see you edited!
OLderDan said:
2.4 or 5ghz? What encryption ie wpa wep open? Can other devices connect to the wifi? Is the channel congested?
Edit I see you edited!
Click to expand...
Click to collapse
Yeah there isnt any problem with other devices, btw i forgot the wifi on my phone, rebooted both phone and modem and it was perfect for a moment,then it goes back and its bad now, its 2.4,wpa/wpa2 i guess and i already tried digferent channels
Have you tried going to maccas or wherever is a free wifi near you and seeing if the phone can connect to something other than your router?
OLderDan said:
Have you tried going to maccas or wherever is a free wifi near you and seeing if the phone can connect to something other than your router?
Click to expand...
Click to collapse
Sorry forgot that,i was at my cousins and it was working perfect, problem is only at my home
I realised something now, i entered my gmail account on laptop and it sent my phone a notification, when i opened it I saw that one of my last connected location is Ireland. I didnt download any vpn apps so why is this saying that?
You might want to check the router settings. Some routers have a default limit on how many devices can be connected at once. It sounds like either that or IP address conflicts.
es0tericcha0s said:
You might want to check the router settings. Some routers have a default limit on how many devices can be connected at once. It sounds like either that or IP address conflicts.
Click to expand...
Click to collapse
It could be about ip address because there isn't so much device, so what should I do? And I think it could be about dns settings, I tried something for that but couldn't solve it