Hi, I got one big problem while I was upgrading my Qtek 2020 from ROM 1.58fr to the Launch ROM fom O2. During the pocess I guess that I lost the connection and the upgrade failed.
I tried to launch it about 10 times without any results. When I switch on my Qtek I just see a grey screen showing me the version of the ROM I tried to install 1.03.
Now, as I cannot do that from my PC I would like to try from a SD card with the XDAtool. However, where do I find a ROM I can use to install my XDA with this tool and how do I boot from my SD card ?
Thanks for your help, I'm a bit disapointed for the moment.
Mav
Information on the SD Card upgrades can be found on another forum topic, here, obviously I don't need to tell you to be cautios when doing this.
As for finding a ROM, you can either use the one from a rom-kitchen, like lumpensteins rom-kitchen, or register and download one from your service provider and start installing it, but remove the files from the temp directory and put those on an SD card. There are plenty topics in these forums with more detailed instructions, so I suggest you search more.
people, it's possible this? i've read others posts!!about unbricker methods... it's possible or not? erofich, help us!!! Thanks
what is a "gold card"?
Man, i've read this in http://wiki.xda-developers.com/index.php?pagename=Elf_GoldCard it's possible to get something like that for HTC S411?
its possible it will work.......cause i think this was originally done on the herald. But then you're still stuck at this step:
Code:
Download a shipped ROM (not a dumped or cooked ROM!) with the [B]same Device ID[/B] as yours
so you're still stuck, since u need a shipped rom for the s411
XtreMe_G said:
its possible it will work.......cause i think this was originally done on the herald. But then you're still stuck at this step:
Code:
Download a shipped ROM (not a dumped or cooked ROM!) with the [B]same Device ID[/B] as yours
so you're still stuck, since u need a shipped rom for the s411
Click to expand...
Click to collapse
Device ID isn't a Carrirer ID
device id in our case means STAR100 or STAR160
yes aldo, i think it will work!
please, could you help me? because this phone is very uncommon in my country, i need the gold card, i don't know who has this phone. please send me the file if you have this phone. thanks
my bad......got my IDs mixed up. So aldo, u are ok with that, u can use either the qtek rom or the dopod rom. all the steps and files you need are in that wiki. you dont need another s411 for this, you just need a working windows mobile phone to obtain the card ID. its really easy, i already created one myself, i just haven't had the time to test it yet.
read the instructions in the wiki article, and if you are having problems, then post in the thread that's linked in that wiki article. And once you are done, if you're successful, post here, so others that have bricked their phone know that they can use this method to unbrick it.
please, attacht the file for test... please
i don't have any WM device, please attacthment the file to test in my phone
dude, there is no file to post, its written directly to the sd card.
if i generated the file instead of directly writing it, this file will only work with my sd card, which is why you need to do this on your own. dont you realize this is why there are only instructions on how to generate the gold card, and no one posted any file. borrow a wm device from someone, it only takes like 3 clicks.
i still cant test if this works.......i need to hunt down a non-sdhc card, i knew i shouldnt have returned that 2gb card.
aldo, you need a gold card image which has own serial number
aldo0203 said:
because this phone is very uncommon in my country, i need the gold card, i don't know who has this phone.
Click to expand...
Click to collapse
you don't need exactly the HTC StarTrek to read your MicroSD card's serial number - you can use ANY Windows Mobile powered device which has a microSD slot
ok, thanks, i'm going to look for someone who has WM device
tomorrow, i'm going to get a WM phone, i still couldn't have to test it... i hope it will work.. cross fingers!!!
dont forget to format your microsd card to fat32 before!
aldo, describe your problem here and stop spamming by both private and visitor messages, or i will add you to black list in my profile
ok, i explain you... when i tried to install the gold key in the SD card, i get a error that it says as follow: You need to set right registry permisions. See the QMAT manual for more info....
Please, tell me what i can do, answer me, thanks and sorry for the inconvenients
http://revskills.de/downloads/QMATManual.pdf
page 38
Oh my God, my phone is live............ it works!!!!!!
oh my god, oh my ****ing god... it works!!!
People follow the steps in http://wiki.xda-developers.com/index...e=Elf_GoldCard; first you have to this is in the WM device working if you don't get the gold card....
This is taken from Manual QMAT: page 38
This tool lets you create a goldcard for HTC devices. The goldcard is a special SD card that unlocks
Diagnostic Features for HTC devices.
Once your device is connected via Activesync / WMDC, you can press "Get SD Card Serial from
WINCE Device" to obtain the serial number of the inserted SDCard in your PDA/Smartphone.
Alternatively you can enter the 16-byte Serial number manually.
To make it work, please check the following :
- On the device, allow start of itsutils.dll
- On some devices you must set the right security permissions via Registry Editor :
HKLM\Security\Policies\Policies\"00001001" set to integer 1
After that, select the device under "device key" to generate a goldcard image.
Then you can choose either "Save Goldcard Image to File" to generate a SDCard Image,
or write the Goldcard directly to the SD Card inserted in your PDA/Smartphone via "Save Goldcard
Image to WINCE SD".
Do it!!! and post your results....
my congratulations
Hi guys,
about one year ago (or more?) I flashed WM6.1 from newplow`s website on my N560.
Since this my N560 destroyed more than 5 (five) SD Cards. The file system is damaged and some folders can`t be deleted. Even new formating of theses cards can`t bring them back to live.
It is very bad, because 4 of 5 times I was on holiday and my TomTom maps weren`t readable anymore!
Is this a problem of an old WM6.1 firmware?
If you tell me how/where to find out the exact firmware version, I can post it here.
Hopefully,
duffy6
Well I got adventurous (read foolish) this morning and I tried to flash my orange uk mozart with an unbranded rom floating around. It started, got to 11% and stalled. Now every time I power on the mozart it is stuck on the boot loader. I could not even get to the usb host to use goldcard anymore.
It appeared as if the only solution for now is getting a proper orange-uk rom or is there any other solution. Please help. Thank you.
Anyone? Please help me!
As long as you can get to the tri color screen you should be ok, just flash the proper ROM back on.
You might find it in the Mozart forum by ansar.
abbas said:
Well I got adventurous (read foolish) this morning and I tried to flash my orange uk mozart with an unbranded rom floating around. It started, got to 11% and stalled. Now every time I power on the mozart it is stuck on the boot loader. I could not even get to the usb host to use goldcard anymore.
It appeared as if the only solution for now is getting a proper orange-uk rom or is there any other solution. Please help. Thank you.
Click to expand...
Click to collapse
I have the same issue as you, using a debrand kit from fonefunshop and now my phone is stuck in USB host mode displaying "Enter USB Host Mode...".
Did you manage to resolve your issue? If so how?
Sorry to hear about your problem. I used a gold card with the european rom posted by Football to resolve it. Give it a go.
Sent from my HTC Vision using XDA App
Problem Solved!
Here are the steps I took to resolve the issue I was having, with the Mozart stuck at bootloader, "Enter USB Host...".
First I formatted the SD-card, then used my brothers Android phone with ASTRO File Manager to extract the CID code from the SD card.
1. Insert the SD card into the Android phone
2. Start the ASTRO File Manager
3. Navigate to sys/class/mmc_host/mmc1/mmc1:aaaa (instead of aaaa there could be something else as well)
4. Long press on the 'cid'-file
5. First select Open as, then Text
6. Then select File-Editor
7. Write down the number 1 to 1 onto your PC/Mac
Once I had the CID code, I used http://psas.revskills.de/?q=goldcard to generate & email me the goldcard image file.
I formatted the SD card at this point, FAT32, 4096 sector size.
I then used HxD Hex Editor and Disk Editor to copy the goldcard.img into the first sector the SD card.
Heres how:
1. Run HxD as Adminstrator
2. Open the SD card by going to Extras > Open Disk > Physical Disks (important) > Removable Drive. Make sure Open as Read only is unchecked.
3. Open the goldcard.img by going to Extras > Open Disk Image.
4. From the goldcard.img, Select All and Copy all bytes.
5. Paste into the first 384 bytes of the SD card - offset(h) 0x0 - 0x170.
Next I copied a European ROM on the the SD card (in explorer as you would with any file) and rename it to MOZAIMG.nbh
With the Y-cable I booted the phone and to my disbelief it started and successfully reflashed the phone.
http://www.youtube.com/watch?v=0t_xNdf9DeQ&feature=player_embedded
Hope this helps!
I just got a g-tab. Its great!
My problem is when I try and download an app, my g-tab is not recognized. The site sees my phone and another tablet I have, but not the g-tab.
I tried to download Google maps, and it says its already installed. It is installed on my cell phone, but not on the g-tab. Same story with other apps. It askes which device I want to download too, but the g-tab is not one of the choices.
The g-tab is as it came out of the box.
Any advice will be appreciated.
Thanks...
A stock gtab doesn't have google market access. I think viewsonic includes a useless "market" app. Your best bet is to use the Amazon marketplace, which can be side loaded.
I didn't spend any time on stock, but I'm certain there is a marketplace hack around here somewhere.
Also any of the available alternate roms will have market access (with the standard market fix).
Go to my site how to section. Link in my signature.
Still Lost
goodintentions said:
Go to my site how to section. Link in my signature.
Click to expand...
Click to collapse
I started at your website about 9:00am. Its now 5:00pm. I got the bluetooth antenna to work, but am unable to get the copilot software to work. I download it for free, but get error messages.
I went back to your website, but am unable to "link in my signature." Sorry, I do not know what that means.
Is it possible to use my cell phone to download it to a sd card. Put the sd card in the gtab and install it that way?
Thanks...
(1) On my website in the How-To page there's a section that tells you how to use the gps.
(2) Co-pilot is not a free app. You have to buy it. You downloaded an illegal version, which gives you errors.
(3) Everything you need to know and to download for turning the gtab into a 10 inch gps is on that How-To page.
(4) Link to my website is in my signature. But just in case, here it is.
(5) There's also instructions to do market fix on the How-To page. The menu in the How-To page to find the various how-to's are on the right hand side.
http://viewsonic-gtablet-for-dummies.webs.com/apps/blog/
Thanks for your help and patience...
goodintentions said:
(1) On my website in the How-To page there's a section that tells you how to use the gps.
(2) Co-pilot is not a free app. You have to buy it. You downloaded an illegal version, which gives you errors.
(3) Everything you need to know and to download for turning the gtab into a 10 inch gps is on that How-To page.
(4) Link to my website is in my signature. But just in case, here it is.
(5) There's also instructions to do market fix on the How-To page. The menu in the How-To page to find the various how-to's are on the right hand side.
http://viewsonic-gtablet-for-dummies.webs.com/apps/blog/
Click to expand...
Click to collapse
Thanks.