Related
Hi everybody
I need help for my friends xperia x10.
I dont know a lot about Sony Ericsson because im using Samsung Galaxy S.
This xperia x10 was with firmware 1.6 and he tried to upgrade to 2.1. After upgrade he had a lot of problems whith the phone, actually the sound was not working for some days then according to my friend it didnt boot anymore.
The problem with the phone is like this: when you press the power button it vibrates and you can see only the black screen for few seconds. After that restarts and this repeats all the time. When i connect to pc it cant find the drivers.
Please if somebody can help me to solve this because in my country we dont have Sony Ericsson care center.
Thanks in advance and sorry for my bad english
Sent from my GT-I9000 using XDA App
Download SEUS and do a repair.
Sent from my X10project using XDA Premium App
realunited123 said:
Download SEUS and do a repair.
Sent from my X10project using XDA Premium App
Click to expand...
Click to collapse
I used SEUS and updated to 2.2 but i have again the same problem, it keep restarting. I cant get even the boot animation or logo. Anyway thanks for trying to help
cipiculla said:
I used SEUS and updated to 2.2 but i have again the same problem, it keep restarting. I cant get even the boot animation or logo. Anyway thanks for trying to help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928343
rendeiro2005 said:
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thanks for the help but this didnt work too
During the flash I dont get the pop up message and in the end of the flash i get this lines
INFO - Flashing finished.
INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging
After i turn the phone on it repeats again the same thing. It does'nt display anything just after few seconds it restarts again and again, all the time.
Please if somebody can help me. I just want to know if it can be repaired or not, or is it maybe any hardware problem!!!
if SEUS, PCCompanion or flashtool can´t do the job you may have some hardware issues. in that case, if you have warranty still valid, use it.
cipiculla said:
Thanks for the help but this didnt work too
During the flash I dont get the pop up message and in the end of the flash i get this lines
INFO - Flashing finished.
INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging
After i turn the phone on it repeats again the same thing. It does'nt display anything just after few seconds it restarts again and again, all the time.
Please if somebody can help me. I just want to know if it can be repaired or not, or is it maybe any hardware problem!!!
Click to expand...
Click to collapse
Here is an even more specific step by step guide for AT&T noobs....
http://forum.xda-developers.com/showthread.php?t=1012380
Usually when the flash tool aborts like that, it is due to either a) battery isn't fully charged or b) there's a problem with the ftf file you downloaded. Try charging battery first and a new download of the ftf firmware.
hy i have an xperi x10 and i upgrade it whit the xperia mini firmware an now my phone freezes on startup and companion says tht i have the latest update and it wount do anything pls help !
wizzard_2009 said:
hy i have an xperi x10 and i upgrade it whit the xperia mini firmware an now my phone freezes on startup and companion says tht i have the latest update and it wount do anything pls help !
Click to expand...
Click to collapse
Have you tried to repair (not update) in PC companion ?
Have you tried with SEUS ?
wizzard_2009 said:
hy i have an xperi x10 and i upgrade it whit the xperia mini firmware an now my phone freezes on startup and companion says tht i have the latest update and it wount do anything pls help !
Click to expand...
Click to collapse
Why would you update it with an xperia mini firmware anyway?
No Xrecovery backup ?
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Painkille5 said:
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Click to expand...
Click to collapse
You have a faulty xrecovery installed mate!
Use SEUS to repair. Flashtool to root.
Once done, let me know. I have a safe, simple way of installing xrecovery (that works).
Also check http://forum.xda-developers.com/showthread.php?t=1054818
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Hl
Painkille5 said:
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Click to expand...
Click to collapse
Seus will reinstall 2.3.3.
Flashtool doesn't create backup.
Yes, if u made a backup through xrecovery, you can restore it.
But b4 installation of xrecovery let me know
Hit thanks if helpful.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Painkille5 said:
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Click to expand...
Click to collapse
You can use pc companion too.
Check these :
gadgets.apnafundaz.com/2010/07/downgrade-xperia-x10-to-original-generic-firmware-using-seus-new-debranding-method/
ucanphone.com/sony-ericsson/sony-ericsson-xperia-x10-update-service-165.html
www.livesony.com/forum/search.php?searchid=139999
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Painkille5 said:
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Click to expand...
Click to collapse
You should contact doomlord
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
who is doomlord?
Painkille5 said:
who is doomlord?
Click to expand...
Click to collapse
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
aR_ChRiS said:
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Painkille5 said:
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Click to expand...
Click to collapse
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
aR_ChRiS said:
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thats what i said i already know..
can you answer me to the rest of my questions please?
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate if you think you backed up properly from xrecovery and it still in sd card, use card reader to retrieve it to pc. The file should be under sdcard/xrecovery/backup/xxxxx.zip. then try recover it from working phone with xrecovery. Hope this help n good luck.
Sent from my SO-01C using xda premium
milton.bain said:
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
thank you very much!!!
when i will find a way to churge my battery ill tell you what ended up with this!
Thanks!!
Hello, I have a sonyericsson xperia X10 suddenly stopped turning, i tried to repair it with the FlashTool, the flash process its ok , but at the end of the process and turn it , vibrates only once and not on the lcd (black), and when i reconnect to the PC, the phone is in flash mode again., pls which files or Fw additional need install first for repair?? thks for your time pd i use the fw x10i generic stock and pc companion not repair it display a error in upload the sw to phone.
Please use search tab all is there.Take your time and read.
thks for your time, itried all methods mentioneh in the posts but nothing work, for this reason i need help thks...
I installed a Rom that went wrong and had to use flashmode with sony's update program, not sure how it's called these days. I if you install that and plug it into the pc holding down the Back button, it recognizes it and will all you what you want to do. Select restore (or something similar). It'll restore it back to 2.3.3. After that you can install xRecovery again with flash tool.
Be aware that this worked for my semi bricked X10i, no guarantee it'll work for you ofcourse.......good luck
Sent from my X10S using xda premium
Thks, i tried this for 2 days, but in the Pc companion display the message " no exist software update for your phone", later, put on the phone and noting, only one vibrate and the lcd is permanently black, i put again to usb/pc and display the message SEMC flash.... , pls exist a solution for this issue??? thks
You only get that message when you plug in the phone too early
Update>repair>select x10i>then press continue etc>THEN connect phone.
And run stuff as administrator if you got w7.
Sent from my X10i using xda premium
I tried to repair with pc companion , but adter the finish os the process display ok , but the phone stuck in flash mode all time...
Yoy can try flashing a different kernel.Ive had all sirts of errors and failures,something always works.
Charge battery
Try other flashtool version
Try x10 flasher
sent by my x10i using xda premium
ok i tried this options thks
I tried with diffrent kernels but not working , exist a guide for repair this issue, my x10i its always in flash mode, flash with flash tool and again stays in flash mode
Use SE update service maybe it works for you..
Sent from my X10 using XDA
My phone was just rooted and did factory reset yesterday.
After that my phone is crazy as many functions not working anymore,
Abyss ways to save my phone?
WiFi not working
Screen lock not working
Usb to pcbs can be detected but not able to connect
Home button not working
t-up
xksimon said:
t-up
Click to expand...
Click to collapse
device ?
things you did exactly ?
try a seus reset ...
matmutant said:
device ?
things you did exactly ?
try a seus reset ...
Click to expand...
Click to collapse
Eh? It is x10i forum, of coz i am using x10 mini pro
I told what i did in the first post already.... check it out plz
What is seus reset by the way.
If you can goto xrecovery install any custom rom that works with stock kernel...and later after installing custom rom use pc companion and flash the fresh stock rom
xksimon said:
Eh? It is x10i forum, of coz i am using x10 mini pro
I told what i did in the first post already.... check it out plz
What is seus reset by the way.
Click to expand...
Click to collapse
hmmm right, it's in title
you dunno SEUS ?
read miniCM7 miniFAQ, answers to your Q is there (in "usefull links" post)
Yashu1019 said:
If you can goto xrecovery install any custom rom that works with stock kernel...and later after installing custom rom use pc companion and flash the fresh stock rom
Click to expand...
Click to collapse
I didn't install xrecovery before the wiping, so there are nothing that i could do even i had xrecovery
How can i install custom rom? Since it is my first smart phone.
Moreover, right now the phone can't connecting to a computer at all.
I checked a lot of topics that required the phone is able to connect to a pc,
In order to install any custom roms.
matmutant said:
hmmm right, it's in title
you dunno SEUS ?
read miniCM7 miniFAQ, answers to your Q is there (in "usefull links" post)
Click to expand...
Click to collapse
Sorry i am new to this forum, can't found the topic that you are talking about.
Could you mind give me a direct link? Thank you!
the two threads on top of where you posted your thread ...
the ones with written "Read Before Asking Please"...
http://forum.xda-developers.com/showthread.php?t=1266911
the usefull links post : http://forum.xda-developers.com/showpost.php?p=17651751&postcount=3
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
LukBoy99 said:
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
Click to expand...
Click to collapse
Eh....
WiFi not working
Screen lock not working
Usb to Computer can be detected but not able to connect
Home button not working
That's mean even my computer has installed pc companion, The computer can't read the phone correctly, so it is impossible to recovery in this way
Yes i don't mind my phone becoming unrooted
LukBoy99 said:
If ur totally stuck officialy unbrick ur phone (will delete all PHONE memory,not memory card)
1-download and install sony erricson pc companion from official site.
2-click on support zone
3-click on update software
4-click on repair phone
5-accept agreements etc.
6-choose phone type (from what I understand your is x10 mini pro,like me.
7-start installing
8-phone should bee like the day you bought it
P.S:root is removed so if u want u should root again
But boot loader stays unlocked(if u had unlocked it)
If what I said help better click the thanks button
Sent from my U20i using XDA
Click to expand...
Click to collapse
If your provider didn't change the software on your phone too much, this will work. It will work best if you leave your phone disconnected from your pc until step 7
SmG67 said:
If your provider didn't change the software on your phone too much, this will work. It will work best if you leave your phone disconnected from your pc until step 7
Click to expand...
Click to collapse
Usb to Computer can be detected but not able to connect
U should try to connect to flash mode what I did when it was rebooting on self
1-removed battery till step 7
2-quickly insert it (dont even use back cover till ur done)then hold back button and plug the cable in ur phone untile led flashes(plug usb in pc b4 starting this)
Wish this helps
Sent from my U20i using XDA
If non of above helps ur last solution would be flashing stock kernel (which can be found on xda) with flashtool with the battery quick in and backbutton method but youll need ur bootloader unlocked
Sent from my U20i using XDA
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
did you try flashing any stock ftf rom file using flashtool?
or repair using PCC or SEUS.
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Repair with Pc Companion or Update Service
Instructions:
Hold your back button (3button) , then connect with ur USB to x10 untill the LED light appear, after that wAAAit ur cpu install ur driver, then go pcc update ur phone, if it pop out that u have last software just continue it , AAAfter that all, ur bricked x10 hAAAve been repair
Hope helps
Superman™
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
gordonx10i said:
It wont boot into flash mode or recovery , i know how to flash etc but i cant get it into flashmode (downloading mode) . Pc not picking it up either
Thanks anyways
Any other ideas
Click to expand...
Click to collapse
Then I guess you cant do anything about it
Also if if it wont boot in recovery or to the rom I dont think SE people can know that its running unofficial roms
gordonx10i said:
Hi everyone,
I flashed incorrect kernel for my baseband and broke my x10 now it just stuck at se logo. I would just go into recovery but I'm pretty sure the charegmon file thats on my system at the moment is not monitoring the back button.
so no recovery
Phone is also not going into flashmode so i cant use flash tool to flash a new rom with correct kernel etc.
so no flash mode
Usb seems to be broken aswell since before i flashed incorrect kernel it would not charge any ideas on what i can do if anything.
so usb broken
my next port of call would be to send it in for repair on usb but prob not to sony center as its not stock and therefore void of warranty
Already have new phone and upgrade due (probably going to get s3 but would like to get this phone working too)
( When i switch on it vibrates once but no leds )
Thanks
Click to expand...
Click to collapse
Hey gordonx10i, did you try with "x10_2.3_aro"?
Try flash by this, then try to start xRecovery into SEXperia
Check the following XDA Post: http://forum.xda-developers.com/showthread.php?p=16118511
Directly link provided by efx_d3
http://mir.cr/0OIDEZNA
Problem is device not even seen by pc anymore it so dunno how to get it into flash mode is there perhaps not a script exploit that can be run from sd card ......
Sent from my GT-P7500 using xda app-developers app
How to get back to stock even with a broken USB
While I think this might help you :
http://forum.xda-developers.com/showthread.php?t=1054818
Take care mate !
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
+1 on that
Always works
If you had ferakernel, you don't even need to hold back lol
Sent from my Xperia X10 using xda premium
gordonx10i said:
Apologies will try flashing 2.3.3 seems like it might work
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
ARO 2.3.3 kernal saved my life bro, i think you'll have the same luck too go ahead with that :good:
Unbricked from se logo screen
THeLogiC said:
You can try flashing stock ftf file download from link in my signature
To go in flash mode:
Take battery out
Connect your phone to pc via usb cable
Press back button continuously and insert battery simultaneously
Green led should go on
Sent from my X10
Click to expand...
Click to collapse
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
raghava_teja said:
thanx dude..
I have da same problem as gordonx10i
It worked for me from your firmware collection :good:
Click to expand...
Click to collapse
Glad it helped
Sent from my X10
does this method can fix my problem also?
also got stuck bootloader,
because of trying to unlock bootloader..
i guess its my fault, tryng to unlock while im in custom rom?
currently im downloading 2.3.3 stock rom,
and will try to flash it later..
ive tried already PCC and SEUS and still no luck.. (no available updates) =(
THeLogiC said:
Glad it helped
Sent from my X10
Click to expand...
Click to collapse
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
jrennald said:
wow it works.. thnx! ive downloaded the rom in your link!! thnx a lot! ive managed to fix my fone.. =)
thanks!!
Click to expand...
Click to collapse
No problem again
Sent from my X10
THeLogiC said:
No problem again
Sent from my X10
Click to expand...
Click to collapse
Remember guys X10 can't be bricked... it can always be unbricked and that too very easily all required is bit of patience to go through the forum
Sent from my Transformer TF101 using xda app-developers app