I have problem with my Dell Streak. When i connect it to PC (any PC) with USB cable, nothing happen, just charging.
Even notification about USB Debugging and Mass Storage didn't appear on my notification bar.
I've done everything about the driver and it just didn't work.
When i look at my device Manager (W7 PC), no new hardware found when i connect my Streak.
I've search on the net about my problem but i haven't found any working suggestion.
Can anyone help me?
And because of this problem i can't root my Streak. Is there anyway to allow me rooting my Streak without connect it to PC?
I've tried Z4root and Androot, now i'm trying Gingerbreak.
maybe you have a problem with the storage card, change with another and try again, and yes for rooting use the Gingerbreak, is very good and easy to use. Goodluck
Storage Card changed, still nothing happened.
Is it possible there's something wrong with my data cable?
Charging is fine, just can't connect to PC.
And any other apps suggestion for rooting?
All apps above not working with my Streak.
Do i have to bring it to Dell Service Center?
Anyone can help me with my problem?
Sounds incredibly simple, but have you tried using a different USB slot?
Sent from my Dell Streak using XDA App
same problem with me now any solution
I got the same issue, actually I think we all damaged the dell streak pdmi connector. My phone gets lots of crap stuck to it while its in my pocket like tissue paper, also the pins on the pdmi look broken..maybe due to me forcing the cabling in.
I've looked to getting it repaired but its not cheap however someone told me that 02 will fix it for free as its still covered by warrenty until 2012.
Related
I just got a new T-Mobile Samsung Vibrant. Running 2.1 Froyo Update 1, on JI6 modem and 2.6.29 kernel. Stock unrooted so far.
When I plug in my Samsung Vibrant into my Windows 7 64bit Machine, it is not being detected by Windows Explorer. I installed Samsung's Kies Mini and to STILL not being detected by the program. I installed 64 bit drivers and nothing. I've tried a combination of setting under USB settings Samsung Kies, Media Player, Mass Storage and Ask on Connection. None of them work.
I enabled/disabled USB Debugging in combination with some of the usb settings. I've disconnected and tried every single USB port on the back of my motherboard. I've reset the phone, and my computer. NOTHING WORKS. If someone can point me in the right direction if would be GREATLY appreciated. This is my first android phone and so far its not going so well....Will give THANKS to anyone who helps. What my main goal is to wipe the phone clean, and install a 2.2 rom on it or even Vanilla 2.2 With Root. Still new to this stuff....
Have you gone to the samsung website and downloaded/installed the drivers for your phone?
Here's a link for within XDA that has both the 64 and the 32 bit drivers
http://forum.xda-developers.com/showthread.php?t=728929
I think my issue is my LG Data cable. I've read around and apparently I need a Samsung Certifed USB Data Cable?
Edit: And yes I got the EXACT same drivers off the Softpedia page. Gonna reinstall for a another try but I'm 100% sure its my gimpy USB Cable.
Ah. I suppose that's possible as well. It's the same with car charger sometimes too. If it isn't setup with the exact same pins that your phone has then it won't work. So, even if the connectors look identical, apparently they're not.
Ah. I suppose that's possible as well. It's the same with car charger sometimes too. If it isn't setup with the exact same pins that your phone has then it won't work. So, even if the connectors look identical, apparently they're not.
You need a samsung certified data cable.
The pins look the same, but they aren't. Once you get the cable (I'm sure it's not more then $5), it should work. If you have T-Mobile around you (you have canada, so go to the provider that offers the equivalent of the Vibrant), ask to buy a "SAMSUNG CERTIFIED DATA CABLE". Nothing else.
Ordered one off of ebay should be arriving shortly. Hopefully this fixes my problems.
Same Problem
I'm having almost the same issue. However, rather than not being recognized by Windows, it tells me that there's a problem with the driver. And that's after I reinstalled Samsung's driver.
I'm not sure if the problem is with the phone, or with the cable, or with my computer. I'll try again at work on Monday.
In the meantime, assuming the problem is with the phone, how do I hard reset the phone, wiping the Samsung update, etc.? If I do so, will the Android Store know that I purchased all my apps, or will I have to buy them again?
And what backup program do you recommend for copying all my user data to my micro-SC card so that I don't loose everything.
Used my old BB cable and voila. Thanks for the help guys it was the USB cable indeed.
I get the message when i connect the x10 to the pc "usb device not recognized" i´ve tryed other cables and uninstalling the drivers and reinstalling them. Even anoher pc. but i get the same message where ever i try.
Is it possible that some of the pins are broken?
Is this something i can fixed on the warranty?
If so, even if i have installed a custom rom?
------
I turned the phone in and they replaced the SWAP-Unit. All on warenty! When i turned the phone in i asked the dude there about custom rom and repairs, he said it dident matter aslong as its something wrong with the hardware and not the software ofcaurse
Can u run the phone on flashtool or SEUS from SE on the computer? Or is the phone not reconized on that either?
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
it says not recognized when i connect the phone to the pc even in flash mode, and the programs dont detect that its conneced.
leivz0r said:
it says not recognized when i connect the phone to the pc even in flash mode, and the programs dont detect that its conneced.
Click to expand...
Click to collapse
Then you propably got broken usb connector or your IC controler on motherboard stopped working. If you look at your connector and all the pins just looks fine then connector is really ok. Now, it is surely IC controller. You have to send your phone on warranty, and you are going to receive a new one. Yes, a new phone. There is no other way to fix this. And from what I know, you don't have to bother about different ROM installed. No one else bothers bout it too.
edit:
Oh BTW, if this happened now, then propably in short time you will loose ability to charge your phone VIA USB connetected to PC, if not immedietly then after this charging won't be possible at all, even with AC charger.... So... be prepared.
No my connections looked fine but on metering from the USB connector to the filtering circuit it was open circuit I flowed solder on the joint I then had continuity reassembled and all worked great, no need to go to the interface circuitary. I am saying if the system cannot read the voltage drop across the shunt resistor it cannot control the current and will not charge.
Sent from my X10i using XDA Premium App
+1, in my case it took about 2 weeks from pc unable to read phone to cannot charge at all.
diament said:
Then you propably got broken usb connector or your IC controler on motherboard stopped working. If you look at your connector and all the pins just looks fine then connector is really ok. Now, it is surely IC controller. You have to send your phone on warranty, and you are going to receive a new one. Yes, a new phone. There is no other way to fix this. And from what I know, you don't have to bother about different ROM installed. No one else bothers bout it too.
edit:
Oh BTW, if this happened now, then propably in short time you will loose ability to charge your phone VIA USB connetected to PC, if not immedietly then after this charging won't be possible at all, even with AC charger.... So... be prepared.
Click to expand...
Click to collapse
Sent from my X10i using XDA App
Since u guys are discussing this, I wanted to know how does one disconnect the phone from the the PC.what is mount and unmount?? Will it harm my device in anyway??? Which is the safest mode to connect it to PC??
first, try a different usb cable, I had the same problem. as for the mounting problem, should have made a new thread, but you should mount usb to transfer files, but no need to if just charging, but be sure to unmount or else you could corrupt your sd card, and it also creates another drive on your computer if you don't 'safely remove usb' after unmounting
Sent from my X10 using XDA Premium App
denenatse said:
first, try a different usb cable, I had the same problem. as for the mounting problem, should have made a new thread, but you should mount usb to transfer files, but no need to if just charging, but be sure to unmount or else you could corrupt your sd card, and it also creates another drive on your computer if you don't 'safely remove usb' after unmounting
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
m sorry didn't want to make a new thread so I asked my question here...am sorry..but where is the unmount option..on the comp or on the PC??
circleofomega said:
m sorry didn't want to make a new thread so I asked my question here...am sorry..but where is the unmount option..on the comp or on the PC??
Click to expand...
Click to collapse
on your phone - settings--}SD card and phone storage--}unmount SD card
circleofomega said:
m sorry didn't want to make a new thread so I asked my question here...am sorry..but where is the unmount option..on the comp or on the PC??
Click to expand...
Click to collapse
no no, its the one in the notification bar.
Sent from my X10 using XDA Premium App
Hey guys, I did try searching, but if I missed a post please link.
Problem is this: Randomly at the beginning of the week 3G stopped working, and along with that (probably unrelated, but never-the-less...) the phone, when plugged into any computer, would not be recognized ("Unrecognized Device" and under device status is it would say "This device cannot start. (Code 10)"). I did fix the 3G issue, but the phone still won't connect to any computer.
I've tried on computers with and without samsung drivers, with the phone both in and out of debug mode, usb storage both on and off. Currently on my PC it sees that it is a samsung device, but it has the yellow triangle, signifying that it still cannot start the device. Cannot ADB into it obviously, and cannot even get ODIN to see it when in download mode. Yes, I've also tried 2 different cables.
Using Windows 7 on all the computers I've tried it on (don't own anything older unfortunately/fortunately) and currently using ComRom 2 RC 2 PBJ (though this started on ComRom 1.3, and have tried the OTB kernel as well) thoughts?
Thanks guys!
Have you tried booting to CWM while plugged into the usb? That usually fixes it for me.
what i do is go to device managers look for your device and make sure the right drivers are installed once you install the drivers everything should be good
bryan901 said:
what i do is go to device managers look for your device and make sure the right drivers are installed once you install the drivers everything should be good
Click to expand...
Click to collapse
correct drivers are definitely installed.
hecantbreathe said:
Have you tried booting to CWM while plugged into the usb? That usually fixes it for me.
Click to expand...
Click to collapse
just gave that a shot. new dialog box popped up "usb device not recognized".
I'm probably going to try and go back to stock, but I'm not sure if that is really the issue.
Same thing here.. no idea what to do.. last time this happened I installed/uninstalled drivers until I thought I was going to puke.. even now I'm on a fresh install of Windows 7 x64 with SP1.. so .. this is really starting to suck!! Plug in the device and INSTANTLY "device unknown"... Yeah.. right!
Have both of you tried changing usb setting from mass storage to ask on connection? Uncheck usb debugging, go into usb settings change it from mass storage to ask on connection, go back and turn on usb debugging, then connect phone to computer.
landshark68 said:
Have both of you tried changing usb setting from mass storage to ask on connection? Uncheck usb debugging, go into usb settings change it from mass storage to ask on connection, go back and turn on usb debugging, then connect phone to computer.
Click to expand...
Click to collapse
I will do this promptly and post if there is a success story.. har har!! Thanks for the tip.. we'll see..
/EDIT/ Does nothing... nothing at all.. I hear the sound when USB is connected to Win7 ... then immediately says "unknown device" doesn't even seem to try and pull drivers.. it's almost ready to fly out the window...
/EDIT2/ Well I just got one step closer... I basically uninstalled ALL USB hosts, etc. Restarted, they installed.. then plugged phone in.. recognized, got the "installing device drivers", then FAILED to install... I'm lost.
Now here is the actual message that I am getting, I can only assume OP is too...
Windows has stopped this device because it has reported problems. (Code 43)
Click to expand...
Click to collapse
jbarcus81 said:
Now here is the actual message that I am getting, I can only assume OP is too...
Click to expand...
Click to collapse
Oddly enough, I'm not getting that. I'm getting error 10, device failed to start. I'm sure these are related somehow.
Also, I did try the above suggestion, with no success. I did notice though after I unchecked "usb debugging", told it to ask on connection, then re-enabled usb debugging i get "no accessibility services" which I'm not sure is an issue, but it is never-the-less an error message. does everyone get that message?
thanks for the help everyone
dopepope said:
Oddly enough, I'm not getting that. I'm getting error 10, device failed to start. I'm sure these are related somehow.
Also, I did try the above suggestion, with no success. I did notice though after I unchecked "usb debugging", told it to ask on connection, then re-enabled usb debugging i get "no accessibility services" which I'm not sure is an issue, but it is never-the-less an error message. does everyone get that message?
thanks for the help everyone
Click to expand...
Click to collapse
I get that message everytime I check usb debugging. Just click OK and everything should be fine.
All I know is that it's out-right ridiculous.. I seriously doubt there is anything wrong with either of our phones since this has worked fine to this point.. I'm just trying to get back to stock using ODIN .. but can't .. I am so frustrated I can't figure it out..
Something interesting here.. I plugged the USB cable into a port and windows said it was an unknown device.. I just plugged the cable in.. bad cable issues??
I have been attempting to fix this very problem for weeks. Nothing has worked. It won't even recognize the phone in Recovery or Download mode (Odin or Heimdall). I'm getting tempted to request a phone replacement.
For me it started right after I installed blackberry drivers on Win7 x64. Does anyone else have this in common? Maybe recently installed other USB drivers? Perhaps the problem and the install are mere coincidence? Anyway I ordered a new USB cable so I'll give that a try.
Also, has anyone trided naven's format utility? I'm starting to think this may be the signs of the USB port dying.
I wonder.. will there be an issue for service if I have a rooted phone with custom rom installed? That's the only issue right now about sending the phone back.. and the more I think and mess around with it.. if I hold the plug snug in the phone and wiggle the cable some, I can connect and disconnect... I think my cable is messed up ...
I think I have my issue resolved... Usb cable is bad... My buddy has the same cable end to his phone charger and it will charge my phone... And now my cable won't even do that... Need to find a usb cable to verify but it seems these cables are very sensitive... Check your cable OP...
Sent from my SCH-I500 using XDA App
I will update on if my issue is fixed when I get my usb cable on wednesday. Fyi, the samsung cable is available on amazon with prime shipping for around $2-3.
Sent from my SCH-I500 using XDA Premium App
Just picked up a USB cable from Walmart .. not a bad deal and guess what? Fixed 100% ... Was a bad USB cable. Never again will I use the Samsung USB cables.. only lasted about 3 months.. LoL.. All fixed!!! YAY!!!! OP - I think you will be all set as well once you get your new cable..
Replaced the cable and I still have the error. =(
I'm not sure what else I can even try...
EDIT: Fixed it. Uninstalled all USB drivers from my system and let windows reinstall them. toggled USB debugging on the device and mock locations on and it works. What an odd problem..
I Also solved this issue with a new cable. I had tried a different cable and still had the same problem.
So I wasted much of two days troubleshooting. Finally arranged for a warranty replacement but still had the same problem. I was getting ready to do a clean installation of windows and it struck me. Try a new cable, even though the two cable test ruled that out.
I figured that was worth a try before rebuilding windows.
The new cable fixed the problem. The 2 cable test should have revealed this. It's possible I had two issues and the warranty replacement and the cable fixed it.
Sorry that a second cable didn't fix the problem for the person above me.
Sent from my SCH-I500 using XDA Premium App
My vibrant usb no longer works, Phone charges and detects usb cable (option to mount) but my PC doesn't show phone in device manager...
I've tried cleaning usb, multiple usb cables, and different PC's!
Has anyone had problems like this before? I find it hard to believe out of the blue my usb hw failed... Hoping this is some how fixable... because I need odin access to the phone
any help would be appreciated, thanks
make sure you have drivers?
http://forum.xda-developers.com/showthread.php?t=728929
Yes, I've tried new and old drivers making sure to properly remove them before trying the other... Problem is even if drivers weren't installed Device manager would indicate a unusable or unrecognized device? all PC's i've tried don't indicate any device connected.
My other vibrant works fine on all PC's only my Gf's is having a problem...
Could be usb failing I had to send mines in 2 weeks ago and they replaced the usb at no cost. Just make sure you call the galaxy s support if you plan on sending it in to fix. I got ny phone back within 4 days.
Sent from my SGH-T959 using Tapatalk
Going to call Monday thanks for the info
Sent from my T959 using xda premium
Hey Guys!
I have a suspect problem with my Atrix. I dont get an USB connection to my PC (Win7 64bit) or to my laptop (Win7 32bit).
So when I connect the USB cable, I get the message "USB connection" in the status bar, but only for 1-2 seconds and than its gone.
Sometimes (rarely) it works when I press fast on this message (but it can be only luck).
But I flashed today a new ROM (AURA) and with fastboot I havent had any problems.
The drivers are installed on my PC and with this PC it worked at beginning (some month ago).
I have tried:
-different-ROM flashed (aura, Vodafone 2.3.4)
-Debuggin-on / off
-2 Different USB cable
Can it be a hardware problem? But I wonder why I have no problems with fastboot (charging via USB also works of course!)...
After the flash I try to root with Oneclickroot-package, but the programm cant find my atrix.
Someone else has an idea or maybe the same problem with fix?
EDIT: Have somebody experience with the motorola warranty support? Have somebody problems with warranty (not only motorola) beacause of custom ROM or something..?
TT-DD said:
Hey Guys!
I have a suspect problem with my Atrix. I dont get an USB connection to my PC (Win7 64bit) or to my laptop (Win7 32bit).
So when I connect the USB cable, I get the message "USB connection" in the status bar, but only for 1-2 seconds and than its gone.
Sometimes (rarely) it works when I press fast on this message (but it can be only luck).
But I flashed today a new ROM (AURA) and with fastboot I havent had any problems.
The drivers are installed on my PC and with this PC it worked at beginning (some month ago).
I have tried:
-different-ROM flashed (aura, Vodafone 2.3.4)
-Debuggin-on / off
-2 Different USB cable
Can it be a hardware problem? But I wonder why I have no problems with fastboot (charging via USB also works of course!)...
After the flash I try to root with Oneclickroot-package, but the programm cant find my atrix.
Someone else has an idea or maybe the same problem with fix?
EDIT: Have somebody experience with the motorola warranty support? Have somebody problems with warranty (not only motorola) beacause of custom ROM or something..?
Click to expand...
Click to collapse
my first atrix was replaced free (i was inside of the first 30 days) the second one my screen cracked and i did have warrenty however it would cost 140 +shipping so i just bought a new one for 99 lol and am planing to crack open the 2nd atrix and try to replace rhe screen
cause u can buy a new screen for like 40-60 bucks
then i plan to sell it on craigslist
dont think that answers your question
however if they can determine if its "hardware" related and not due to abuse and "normal use they prolly just extchange it
and yes all three of my atrixes were /are rooted and unlocked
Sent from my MB860 using Tapatalk
This may sound silly but my atrix really does not like the USB ports on the front of my case
Have you tryed a different USB port
You have made sure that the usb mode is not "none" right? Because otherwise it will charge like normal and fastboot will work because that is pre OS but it won't transfer data when the phone is on.
oddbubble said:
This may sound silly but my atrix really does not like the USB ports on the front of my case
Have you tryed a different USB port
Click to expand...
Click to collapse
Ya, I know this with some other phones or equipment. I test it, but no change.
bonez565 said:
You have made sure that the usb mode is not "none" right? Because otherwise it will charge like normal and fastboot will work because that is pre OS but it won't transfer data when the phone is on.
Click to expand...
Click to collapse
Can you my how? I think this selection come when the USB cable get connected?!
If I connect the cable to my phone, I get shortly the message "USB Connection - Mass storage" (sry, I dont know the true message in english)
TT-DD said:
Ya, I know this with some other phones or equipment. I test it, but no change.
Can you my how? I think this selection come when the USB cable get connected?!
If I connect the cable to my phone, I get shortly the message "USB Connection - Mass storage" (sry, I dont know the true message in english)
Click to expand...
Click to collapse
I have problems if I move my phone while plugged in. Have you tried setting it on a table and plugging in and making sure not to move it?
rquinn19 said:
I have problems if I move my phone while plugged in. Have you tried setting it on a table and plugging in and making sure not to move it?
Click to expand...
Click to collapse
Of course! Now I tested if I get connection with MSU or RSD to my phone. But no... nothing. DAMN!
EDIT: RSD works! Now I think it gets more and more suspekt.
EDIT2: I tested it in the cardock. But it dont goes to the "carmodus", loading only!
If its under warranty, warranty it out. I'm on my 3rd atrix in 11 months. Faulty digitizers...
erick161 said:
If its under warranty, warranty it out. I'm on my 3rd atrix in 11 months. Faulty digitizers...
Click to expand...
Click to collapse
Seeing how the Atrix is less than a year old I don't understand why we can't just walk into the store and get warranty work as long as it's not something done by the user of course. They know if it's one of their phones they sold by the imei. What difference does it make if I bought it 2nd hand?
Just ranting...
So, the problem was a defect mainboard. I sent it back to motorola and now it works again. Thx for help!
Close//
Gesendet von meinem MB860 mit Tapatalk