hello
having some trouble to activate my Photon 4G im not US resident
and every time after reboot the phone trying to connect to sprint network
but it couldn't of-course because i live in Israel and using different Sim card.
before the Update MR5 i was able to register my device but after the MR5
it's switch's to the Sprint network and says to call the costumer care service.
what is wrong?
Settings, wireless and networks, mobile network and then network mode? Have you tried that? That way it wouldn't search for Sprint.
Sent from my MB855 using XDA App
afive720 said:
Settings, wireless and networks, mobile network and then network mode? Have you tried that? That way it wouldn't search for Sprint.
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
what im sayng that im dont have sprint network in israel.
it wont activate it i dont know why.
the stupid update*&*&*&* all up.
----------------------
update
i dont know what i just did but its activated but again giving me "WIFI ERROR"
** MOD EDIT - Please refrain from vulgar language **
You need to put it in GSM only mode in network to work off your sim. If its set to cdma it will only search for those specific networks. Also you can do a manual setup by using the codes in the dialer. Not sure if they work but try *#*#3282*#*# and you will need your msl from your carrier to access. Or root it and use the msl app from the market
Edit its ##3282#
Sent from my MB855 using xda premium
ok im in the menu but i dont see any GSM in none of the menu's
what i see that i can enter 6 digital code to enter
but i dont have it
i send an email to the seller that i'v bought this phone from.
hope that he can give me answer soon.
Why do you need your phone activated on Sprint if you're not going to be using Sprint?
The phone works fine without Sprint activation on an International SIM...
GUARDIANBD said:
hello
having some trouble to activate my Photon 4G im not US resident
and every time after reboot the phone trying to connect to sprint network
but it couldn't of-course because i live in Israel and using different Sim card.
before the Update MR5 i was able to register my device but after the MR5
it's switch's to the Sprint network and says to call the costumer care service.
what is wrong?
Click to expand...
Click to collapse
What is most likely happening is that the phone is trying to roam by default on Pelephone's old CDMA network (they have not shut it down, it is running in parallel with their newer 850/2100Mhz UMTS network). You can try to go into Settings->Wireless Networks->Network Mode and change it to "Any GSM/UMTS". See if that helps.
becuase everytime after the stupid update i was restarting the phone its trying to
access the Sprint network from some reason.
after i was activated the phone the wifi stopped working entirely.
I'm on an un-activated Photon and just updated myself. I do not seem to have the Wi-Fi issue you are having. Maybe it's something else...
Beach_Head said:
I'm on an un-activated Photon and just updated myself. I do not seem to have the Wi-Fi issue you are having. Maybe it's something else...
Click to expand...
Click to collapse
allot of user complain about it globally
the photon is great but after the update all the problems came to life.
you are lucky
I posted in your other thread.
Try that...
GUARDIANBD said:
allot of user complain about it globally
the photon is great but after the update all the problems came to life.
you are lucky
Click to expand...
Click to collapse
try'd 7
no luck...
GUARDIANBD, I am not sure why you are having wifi problems. With respect to your network issues, please confirm that you have indeed changed your network mode to "Any GSM/UMTS". If you have not done this then by not registering on Cellcom, your phone is actually acting as designed. Please understand that this phone is primarily a CDMA phone with GSM/UMTS capabilities added by Sprint as a "bonus" to their customers who go overseas.
Sprint is a CDMA carrier and if your network mode is set to just "Any Network" then they have correctly designed it to first look for a CDMA signal. If it finds one (which in your case it is finding Pelephone's old network), then it ignores any GSM/UMTS networks. If you did indeed change your network mode to "Any GSM/UMTS" and it still is trying to lock onto Pelephone's CDMA network then (and only then) you are right, the phone's software does appear to have a bug in it.
the first thing after i powerdup the phone for the first time i changed it to GSM mode.
like i say'd before its a bug in this update so i want to reverse the process and
return to MR1 update.
if i restart the phone in Airplane mode the wifi works like a charm
but after i change it back to GSM (and for some reason enables the 4G network with it) it disconnected from wifi.
Is 4G enabled on your phone?
Again, if you aren't on Sprint, it would be pretty useless to have 4G enabled.
Un-check 4G in Settings->Wireless & Networks and see if that fixes the issue for you...
GUARDIANBD said:
the first thing after i powerdup the phone for the first time i changed it to GSM mode.
like i say'd before its a bug in this update so i want to reverse the process and
return to MR1 update.
if i restart the phone in Airplane mode the wifi works like a charm
but after i change it back to GSM (and for some reason enables the 4G network with it) it disconnected from wifi.
Click to expand...
Click to collapse
i dont have 4 in my country (yet) so idont enable it in firstplace.
the stupid.update must be enables it auto.
how.do i get the mr1 sbf? i will flash it back to stock.
You should be on the Motorola forums. I have heard they are very helpful.
Sent from my MB855 using Tapatalk
i registered there since the problem started..
no luck though.
what about the MR1 stock sbf?? can any 1 redirect me to download it?
Have you tried flashing mr3?
bricky23 said:
Have you tried flashing mr3?
Click to expand...
Click to collapse
no i haven't where i can find it? i prefer the mr1 because i was working with it
before the OTA MR5 and was working perfectly.
strange but if i restart the phone in airplane mode the wifi works if i enabled the gsm network the wifi shut itself down
and i cant enable it again having the "wifi error"
Related
hi
if you'll look into those threads
http://forum.xda-developers.com/showthread.php?t=1240704
http://forum.xda-developers.com/showthread.php?t=1247278
http://forum.xda-developers.com/showthread.php?t=1202666
http://forum.xda-developers.com/showthread.php?t=1245163
i was very busy looking where are all the WiFi Error come from.
i found the solution but its not final until Motorola release some update
to separate the WiFi network from Sprint Super idiotic apps "Sprint Zone"
i just reflash'd the phone with the MR5 after reflashing it over and over again
with the MR3 & MR5 updates.
the solution is yet simple and is only for those who using the GSM\UMTS network only until a fix will made by Motorola & Sprint :
after re-flashing the phone with RSDLite to MR5 it will ask you to activate the
phone account with Sprint Zone.
don't allow it because after the activation the phone will restart and will **** the **** out of the WiFi.
the Sprint Zone is looking for Sprint network every time you restart the phone
so you need to change it again to UMTS on every Restart
how to close the Sprint activation you say?
for those who dont have data connection available it will be more
easy the Sprint Zone requires Data connection or sending free SMS
with Domestic Call & Data to Activate the phone.
after the Activation fails change the network back to GSM\UMTS and un-tick Roaming Guards and the wifi returns to Normal.
the major problem is when restart the phone all of the Settings
that you have done will begone so you will need to wait
again 2~4 minutes the phone to "Fail" in activation in order to
regain WiFi and network activity.
hope that helps...
This is relevant to development.
Sent from my MB855 using xda premium
well..im in the right thread havn't ?
GUARDIANBD said:
well..im in the right thread havn't ?
Click to expand...
Click to collapse
No. I am glad your wifi is working. I would suggest posting in the general section as this is has nothing to do with the development of this phone or android.
ok so..may the devs be with me and move this thread to the right and suitable place?
Amen!
hello all,
about two weeks ago a flood came through pa and ever since that flood came through the tower by my house is putting off a "bad 4g" or "h+" signal, which my atrix is forced to used, when i make a phone call the atrix drops down to 3g and i can get on the internet no problem and i can get on any other tower no problem, i called att about the problem and they said the tower by my house is in a degraded state and they don't know how long it will be before it gets fixed, to me it doesnt seem to be a priority since the problem only affects those who's phones use the bad h+ signal. I know the phone would function fine if there were some way to drop the phone down to 3g or edge as my wifes captivate works off the sme tower no problem. I have tried the #*#*4636*#*# option - gms blah blah and it didnt do anything to change the h+, i even figured out how to modify the settings under etc/motorala/android.phone/settings.xml to get the network settings ungreyed only to find out that changing the settings to 2g or 3g did nothing to change the h+ symbol, i am running stock rom 2.3.4 att, one thing i did noticed don't know if it is related but the apn's are locked, do i need to unlock my phone to force edge? those of you who have atrix and are able to force edge please let me know how you are able to and weather or not your phone is locked. if at all possible i would like to avoid flashing roms but would be willing to unlock my phone if it goves me the ability to force edge. this is ridicous that att would lock this option out. please help me as having no internet on my phone sucks
*#*#4636#*#* -> phone information -> set preferred network type to -> GSM only -> Press back button to exit out of it.
Do not attempt to change anything else.
anupash said:
*#*#4636#*#* -> phone information -> set preferred network type to -> GSM only -> Press back button to exit out of it.
Do not attempt to change anything else.
Click to expand...
Click to collapse
i Tried that and it did not change the h+ down to edge and when i go back in it is set back to gsm auto/ are your apns unlocked or phone unlocked if this actually does work for you?
apn wap.cingular and set to use 2g only. wap.cingular is edge. hsdpa will be 3g speeds.
i know i thought of that too, except att has locked all of their apns they have a little lock next to them? any one know how to remove the locks or is this the same thing as unlocking the phone?
voltmeter101 said:
i know i thought of that too, except att has locked all of their apns they have a little lock next to them? any one know how to remove the locks or is this the same thing as unlocking the phone?
Click to expand...
Click to collapse
Add a new apn and select it. You can only have one active at any time anyways.
Sent from my MB860 using xda premium
Alcapone263 said:
Add a new apn and select it. You can only have one active at any time anyways.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
There isn't a 2G option in APN settings.
Hi All,
I know its a topic which has been addressed differently in different threads. I am a user from India and have a GSM SIM. I have got a Verizon S4 phone. I tried using it with Vodafone SIM and get a problem in using it. Surprisingly a NOTE 2 from Verizon works just fine. I am able to use it for data with 3G but not able to use it for voice. Following steps have been tried already.
- Default Options of using Global Mode and GSM/UMTS ** Doesnt search the network at all.
- Hidden Menu Changes using # codes. ** Shows network but emergency mode only.
- Phone Info app to change the mode. ** Shows network but emergency mode only.
- RF Band change using the hidden menu. ** Shows network but emergency mode only.
It does say that it has GSM radio but cant be used for some software reason I suppose. I checked with Verizon Rep and was told that it cannot be used in India with a GSM SIM and would need the Verizon SIM only to connect with International Roaming.
Can I install a I-9505 ROM on this and then would it pick up the GSM signal for voice and data. Please help.
I don't think your Verizon rep is correct. I bought a Verizon S4 just before going to Europe for 1 month. I used first a gsm SIM card from Germany, and then a gsm card from France. I had to add APN's to get data (I used "offline sim APN database" from the market to help get the necessary APN info), but had no trouble with voice or data for my entire trip. The gps and navigation services on the phone were extremely valuable on a couple of occasions, as was the wifi hotspot. In France, you can purchase 2 GB of data service for 20 Euros. I checked with Verizon global services ( 908-559-4899 outside the US or 800-711-8300 from inside ) before I left, and the Verizon S4 was sim unlocked out of the box. They did not make a big deal of my plan to use other SIM cards either.
Sent from my SCH-I815 using xda app-developers app
Installed WamanLite I9505 ROM
Hello All,
I found that Wanam Lite I-9505 ROM can be installed on Verizon S4. I installed it and patched it with Loki-Doki patch to boot up as I got the Verizon Software error. Yet my phone doesnt pick up the GSM signal for voice and SMS. It picks up the signal and I am able to browse internet on it but no calls or SMS. Please help...!!
Is there any way that I can install or flash a regular GSM radio over the phone ? Or tweak it in someway to use the GSM signal as primary for voice and sms.
phrozenwire said:
Hello All,
I found that Wanam Lite I-9505 ROM can be installed on Verizon S4. I installed it and patched it with Loki-Doki patch to boot up as I got the Verizon Software error. Yet my phone doesnt pick up the GSM signal for voice and SMS. It picks up the signal and I am able to browse internet on it but no calls or SMS. Please help...!!
Is there any way that I can install or flash a regular GSM radio over the phone ? Or tweak it in someway to use the GSM signal as primary for voice and sms.
Click to expand...
Click to collapse
I have also Verizon's S4 (i545) and use it in GSM network with only one small problem - it will not send SMS with in-ROM SMS apk to international-formatted numbers (+380-XX-XXX and so on), but send without problem to local-formatted numbers (XX-XXX...) All the rest is working good.
Could you tell me please - how did you get to install i9505's ROM on your device? I have also Verizon's error after installation, and don't know how to run it...
Hi I too have the vzw s4 in india.. and niether voice nor sms is functioning on it.
By rooting it and installing apn manager I was somehow able to get the data 3g working for vodafone ind.
I too am struggling to find a solution to this.
Ive haventvyet flashed it. I came across a guy who said he will be able to get it working but somehow I havent yet been abke to follow up with him.
Guess we both are on the same boat.
Lets keep in touch and update if any of us finds a solution to this.
Sent from my SCH-I545 using xda app-developers app
You all can try to flash my port of ARHD 2.0 ROM, that can be found it this thread:
http://forum.xda-developers.com/showthread.php?t=2346365
It is fully GSM and as international as regular GSM-version of S4. CDMA can be turned on only on hidden test application. Everything else is working and was tested in different networks.
I too created a post seeking help in this regard but didn came across anything concrete yet.
Everyone out here believes it to be a world phone and some have even been using the gsm network in europe but its not working in india.
Ive failed to understand that how come its detecting signals with functioning data is not working on either voice or sms.
Tmobile and atnt gs4 guess have this service menu from where they can be network unlocked explicitly..but unfortunately I havent yet come any such thing for vzw gs4.
Sent from my SCH-I545 using xda app-developers app
ashroh said:
I too created a post seeking help in this regard but didn came across anything concrete yet.
Everyone out here believes it to be a world phone and some have even been using the gsm network in europe but its not working in india.
Ive failed to understand that how come its detecting signals with functioning data is not working on either voice or sms.
Tmobile and atnt gs4 guess have this service menu from where they can be network unlocked explicitly..but unfortunately I havent yet come any such thing for vzw gs4.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
Zer0r said:
You all can try to flash my port of ARHD 2.0 ROM, that can be found it this thread:
http://forum.xda-developers.com/showthread.php?t=2346365
It is fully GSM and as international as regular GSM-version of S4. CDMA can be turned on only on hidden test application. Everything else is working and was tested in different networks.
Click to expand...
Click to collapse
I tried installing the ARHD 2.0 ROM but still the same issue persists. The phone picks up the signal for data but when tried selecting network manually or automatic using the GSM / UMTS option, it says disable data to search networks, when data is disabled, the phone shows available networks says phone registered to network but the status still says Emergency Calls Only. Also if tried dialing a phone it says no network available. There has to be something in the modem settings which can be tweaked through the service menu which will change the use of GSM for voice and data and not use CDMA.
phrozenwire said:
I tried installing the ARHD 2.0 ROM but still the same issue persists. The phone picks up the signal for data but when tried selecting network manually or automatic using the GSM / UMTS option, it says disable data to search networks, when data is disabled, the phone shows available networks says phone registered to network but the status still says Emergency Calls Only. Also if tried dialing a phone it says no network available. There has to be something in the modem settings which can be tweaked through the service menu which will change the use of GSM for voice and data and not use CDMA.
Click to expand...
Click to collapse
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Zer0r said:
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Click to expand...
Click to collapse
I did a full wipe. I have 2 Galaxy S4's and also an Optimus G. The card that I am using is my regular SIM card so its not an issue with the card for sure. The ROM was installed on both the phones and neither of them picked up the signal for voice and SMS.
phrozenwire said:
I did a full wipe. I have 2 Galaxy S4's and also an Optimus G. The card that I am using is my regular SIM card so its not an issue with the card for sure. The ROM was installed on both the phones and neither of them picked up the signal for voice and SMS.
Click to expand...
Click to collapse
Ok. To go and chose type of radio-band you may install Battery Monitor Widget from Google Play (well, the main purpose of this app is different, but it is what comes first in my mind). Put it's widget on the desktop, open it and go for bottom right button, named Test. There you can first menu (Device Info) and there you will be able to change all variations of the radio bands and their combinations, available for i545. If non of the combinations will help - mosty probably your operator works on unsupported for this phone cellular format.
Zer0r said:
Did you do a full wipe when flashing ROM? It is mandatory. You will lose all your data though. If there will be no changes after full wipe - then try to install this card into another phone and ckeck if voice calling is working.
Click to expand...
Click to collapse
Zer0r said:
Ok. To go and chose type of radio-band you may install Battery Monitor Widget from Google Play (well, the main purpose of this app is different, but it is what comes first in my mind). Put it's widget on the desktop, open it and go for bottom right button, named Test. There you can first menu (Device Info) and there you will be able to change all variations of the radio bands and their combinations, available for i545. If non of the combinations will help - mosty probably your operator works on unsupported for this phone cellular format.
Click to expand...
Click to collapse
I have the Phone Info app which allows band select. Tried on all possible modes. Same issue persists. Strangely the Note 2 purchased from Verizon works flawlessly without any mods or changes. I am thinking of giving to some professional phone guy who may have code level flashing or modding tools to try and fiddle around with settings of the modem or the radio to pick up the signal here.
phrozenwire said:
I have the Phone Info app which allows band select. Tried on all possible modes. Same issue persists. Strangely the Note 2 purchased from Verizon works flawlessly without any mods or changes. I am thinking of giving to some professional phone guy who may have code level flashing or modding tools to try and fiddle around with settings of the modem or the radio to pick up the signal here.
Click to expand...
Click to collapse
Hey phrozenwire, I am able to use both voice n sms now in my VZW GS4.
And I literally did nothing to make the voice n sms functional. I too had troubles for like 2 weeks and it didn work for me then.
I rooted the phone to add apn settings and the data got activated. But today morning when I woke up ... surprise surprise .. it began to work.. rcvd sms and calls and I was so happy. . Last I remember I switched on the power save mode and my cell fell down twice and guess it did the trick for me.
Thanks all for your help and comments.
Sent from my SCH-I545 using xda app-developers app
Hello Folks,
I was planning to by VZW S4 to use in India & by looking at all your comments it makes me not to buy. Any further updates after so much of discussion on this phone to make it work in India's cellular service. I see the last post was on July 2013 & now any further lucks/success in making this phone work over there in India??
Tx,
Naraynar
---------- Post added at 11:22 PM ---------- Previous post was at 11:21 PM ----------
Hello Folks,
I was planning to by VZW S4 to use in India & by looking at all your comments it makes me not to buy. Any further updates after so much of discussion on this phone to make it work in India's cellular service. I see the last post was on July 2013 & now any further lucks/success in making this phone work over there in India??
Tx,
Naraynar
Anyone have issues roaming? I'm in Paris and can't connect to a local network at all. Won't even register. WiFi calling seems to work, but I can't get even an emergency call to connect unless on wifi
Sent from my M7 using xda premium
gtkansan said:
Anyone have issues roaming? I'm in Paris and can't connect to a local network at all. Won't even register. WiFi calling seems to work, but I can't get even an emergency call to connect unless on wifi
Sent from my M7 using xda premium
Click to expand...
Click to collapse
Did you add Roaming to your account before leaving to France? I would also make sure that:
1. Network mode is GSM/WCDMA/LTE Auto
2. If you search for Network Operators from your phone, does it find anything?
3. Ensure that Data Roaming is selected
Also, power off your device completely and wait for 5 min before switching on (NOT AIRPLANE MODE). These tips have worked for me in the past, not with this phone but with other GSM phones. Please let me know any resolution, I will be going to the EU very soon and I'm hoping to know the experience from another TMo user.
Hope it helps!
Hey guys, I have a few questions that I need to get resolved which MAY help in getting LTE Working solid on Verizon One maxes for those who Have T-Mobile, but I would like to confirm that T-Mobile LTE does work on the Verizon one Max. You don't need to flash ANY special Radios. You can even use Verizon's Latest Radios and it works. All that needs to be done is use *#*#4636*#*# to change the preferred network type to GSM/WCMDA/LTE and boom, it works. The Problem I am having is that you have to switch to GSM Only first, just to get it to Work on T-Mobile before you switch to GSM/WCDMA/LTE. Another problem is that when you reboot once or Twice, my radio keeps on going crazy Rapidly switching from No Service to T-Mobile and Back. I go back into *#*#4636*#*# and I see that it changed to EvDO+CMDA/LTE Mode. I would have to go back and switch to GSM only to fix the problem then back to GSM/WCDMA/LTE Mode to connect to the network again. And yes I have the fast.T-Mobile.com APN Already inputted. This is with both Verizon and Sprint Sense 5 or 6 Roms. So we know LTE works on T-Mobile with the Verizon HTC One Max, But it won't stick. However, I decided to Flash a Cyanongen 11 Rom to the One Max, I am able to go System > Mobile Networks > Preferred Network Type and switch it to GSM/WCDMA/LTE, Reboot, then go into dialer and enter *#*#4636#*#* and Switch to LTE/GSM auto (PRL) and it works flawlessly. No matter how many times I restart, I still instantly connect to T-Mobile's LTE Network. Texting and MMS works with no issue. So what I think the issue is that On Sense roms there is only 6 Different Preffered Network types to choose from but on the Cyanongen 11 Rom, there are over 15. Also, On Sense ROMS there is only a GSM/WCDMA/LTE type with no Auto and I think that's the issue. There is no LTE/GSM auto (PRL) Selection in Sense roms. Because when I choose GSM (auto) on Sense, I can connect to HSPA, 3G, and EDGE with no issues. So I am asking for some help in How can we get more Preferred network type selections under *#*#4636*#*#. Or is there some scripts we can change with the current ones that resemble a LTE/GSM auto (PRL) Selection. But I think that is the culprit in Getting LTE fully working.
And just to Confirm that LTE is working on HTC One Max Verizon Version.
Even when I put my phone in wcdma/gsm/lte my service stays outputting no signal. Even when I reboot it stays like that until I change the network mode.
I wish t mobile released a one max so we could get WiFi calling
Sent from my HTC0P3P7 using XDA Free mobile app
I have come to use xposed module Intelli3G to auto select the network. It has to be set to you liking of network chose.
I'm trying to do this too. But the roms I have tried so far won't let me get into *#*#4636#*#*. What Rom did you use to get into it?
snyper2k2 said:
I'm trying to do this too. But the roms I have tried so far won't let me get into *#*#4636#*#*. What Rom did you use to get into it?
Click to expand...
Click to collapse
I am using NuSenseSIX-KitKat Rom. If you cant get into the Settings, Download Network App from the app Store.
jerrycycle said:
I have come to use xposed module Intelli3G to auto select the network. It has to be set to you liking of network chose.
Click to expand...
Click to collapse
This does seem to fix one of the Issues, but I am getting Signal Dropouts on LTE when going from Tower to Tower and have to turn on and off Airplane Mode to get it working agian. Do you ever experience this issue?
I don't have to use airplane mode to regain a signal. In my area T-Mobile has spotty signal strength. That is one reason I use LTE but only when signal is fair to good and for long video streaming. Hspa+ for me is better on battery and suffice for Tapatalk, email, mms, market downloads, apk even short videos, etc. I stream more on the weekend because it football season.
theslimed2013 said:
This does seem to fix one of the Issues, but I am getting Signal Dropouts on LTE when going from Tower to Tower and have to turn on and off Airplane Mode to get it working agian. Do you ever experience this issue?
Click to expand...
Click to collapse
I get these drops too.Mainly when I switch wifi off or on.
Any way to get this to work on a spint variant . I really don't think it's hard ware.. and more of soft ware.. please chime in if you Have any suggestions thanks in advance
Sent from my HTC0P3P7 using XDA Free mobile app
jraz305 said:
Any way to get this to work on a spint variant . I really don't think it's hard ware.. and more of soft ware.. please chime in if you Have any suggestions thanks in advance
Sent from my HTC0P3P7 using XDA Free mobile app
Click to expand...
Click to collapse
I use to Have a Sprint One Max with it Unlocked as well and I only got HSPA+ Speeds with it. I never Went about getting LTE to work because I though it didn't have the Compatible Radio inside of it. I am hearing that the Sprint Version has the Same LTE bands as the Verizon Network Uses. But I would try to go into you *#*#4636#*#* (or Download Network from the Play Store) And try switching your preferred network to GSM/WCDMA/LTE and see if it works. Make sure, that your APN Is set to the Fast.t-mobile.com One also. That is all I did to get it to work on the Verizon Version.
snyper2k2 said:
I get these drops too.Mainly when I switch wifi off or on.
Click to expand...
Click to collapse
Same here. Also, I tried switching bands and it did seem to fix the Problem, However it prevents me to Call out or Receive Calls because usually when making or Receiving a Call, the LTE Band goes back to 3G/H/H+ because T-Mobile hasn't Activated VoLTE yet. But it is good to know that LTE does work but it's not really Stable and Global Phone Friendly. The Problems really happen when Driving around or Going from Tower to Tower. Signal goes from perfect to NULL and just stays at 1 or 0 Bars no matter where you go. And you either have to Restart the Phone, Turn the Radio off then on, or Just simply Turn on and Off Airplane Mode to fix it. So I am just using WCMDA or GSM Only for the time being and I don't really want to go to a AOKP CM11 Rom because most of the Features I use aren't there. And just to Clarify, Switching/Flashing Radios and basebands does NOT Fix the problem. I have tried All sorts of Radios, even from T-Mobile HTC One Phones and just doesn't work.
I had used the steps in the link pasted under this to get my LTE working perfectly on the stock Verizon ROM with Sense 5.5 but after upgrading to Sense 6 these changes have caused some issues. The changes worked fine for a day but then the second day mobile data stopped and nothing I did could bring it back. I ended up having to flash a stock rom RUU to get mobile data to come back. I'm not sure why the data stopped on the second day, I may have been from other changes I made to dpi or adding on screen buttons or re-locking the bootloader to use the fingerprint scanner. For now I'm just using gloabal mode which gets me good 3G till I re-gain my courage to try modifying the settings to get the LTE again.
http://forum.xda-developers.com/showthread.php?t=2538998
Hey message me .. I have a Sprint variant .. what radio did u try ... To get lye working from another Carrier I want to try .. to flash another radio on my Sprint variant with a Verizon radio and see if I can get it to catch lte but for fear of loseing my GSM don't want to do it . Thanks in advance
Sent from my HTC0P3P7 using XDA Free mobile app
help not rooted
I've done everything you said step by step and still only EDGE works I've networks and telinfo I'm currently on family mobile