hi
if you'll look into those threads
http://forum.xda-developers.com/showthread.php?t=1240704
http://forum.xda-developers.com/showthread.php?t=1247278
http://forum.xda-developers.com/showthread.php?t=1202666
http://forum.xda-developers.com/showthread.php?t=1245163
i was very busy looking where are all the WiFi Error come from.
i found the solution but its not final until Motorola release some update
to separate the WiFi network from Sprint Super idiotic apps "Sprint Zone"
i just reflash'd the phone with the MR5 after reflashing it over and over again
with the MR3 & MR5 updates.
the solution is yet simple and is only for those who using the GSM\UMTS network only until a fix will made by Motorola & Sprint :
after re-flashing the phone with RSDLite to MR5 it will ask you to activate the
phone account with Sprint Zone.
don't allow it because after the activation the phone will restart and will **** the **** out of the WiFi.
the Sprint Zone is looking for Sprint network every time you restart the phone
so you need to change it again to UMTS on every Restart
how to close the Sprint activation you say?
for those who dont have data connection available it will be more
easy the Sprint Zone requires Data connection or sending free SMS
with Domestic Call & Data to Activate the phone.
after the Activation fails change the network back to GSM\UMTS and un-tick Roaming Guards and the wifi returns to Normal.
the major problem is when restart the phone all of the Settings
that you have done will begone so you will need to wait
again 2~4 minutes the phone to "Fail" in activation in order to
regain WiFi and network activity.
hope that helps...
Related
Hello there I currently have an unlocked vibrant currently on the mobilicity network in Toronto, Canada.
The phone works well, no issues except for establishing and securing a connection with the network provider. Every time I go to an area where it loses service, like parking garages or subways it loses the connection- obviously- but when you get back to an area where there should be service I only connect to the roaming service. This is leading to extra costs since my plan has charges for that.
What I do now is when i go somewhere with no service i switch to flight mode. When i get back where there is service i have to usually turn the phone off and restart it and search for a network manually.
Are there any apps, hacks, or fixes that can stop me from seeing or detecting roaming services, and force the phone to lock on to my network provider's service?
I want to use it only in the current home zones, and if out of one, i accept the fact that the phone does not work at all. I am always in the coverage zone and never want to use it while roaming.
can anyone help?
At the setting, there is an option there Data Roaming, you need to check or uncheck it. Select the option that will prevent you from doing data roaming and that should fix your problem.
On the otherhand, I have a question for you. I have the same phone and same provider, mobilicity. Our problem is the 3g connection. It is spotty sometimes the 3g icon appears and then disappears. Does this happen to you? I noticed the problem occurs when I go under like basement when there is no signal. After resurfacing, I gell signal reception sometimes full but the 3g or data connection won't work. To solve this, we would usually shut down the phone and restart it. Do you experience the same problem? If yes, what was your fix. Thanks.
David
Same problem here. Any guidance will be appreciated.
I've done the suggestions for Wind but to no avail.
same mobile , same provider , same issue
hai guys i have the same issue , but my thing is more worser than you.....when ever i go to an underground parking my 3g gets turned off and wen i come out from that place i cant able to make or receive any calls .....i need to restart the phone to turn on the signal again...its really weird any one have the solution ?????
Hey all, I have a Vibrant on Wind, this is what I do.
Go to settings.
Wireless and Network -> Mobile Network -> Network Mode ->WCDMA only
This enables that you stick to Mobilicity's 3G network and not roam on the Rogers 2G network.
If you lose signal, you will not roam, but simply not be connected until you move out and pick up Mobilicity's signal again.
Hope that helps.
Mobilicity Fix.
I found this on Howard forumns:.... I know this post is old but the solution could help someone who recently bought a old for to get used to customization /flashing.>>> Hope its useful
From Post:
--------
It works!!! It totally works!!!! I love it! Thank you so much guys!!!! Now I don't have to restart my phone EVERY morning as soon as I pull out of the underground garage in my car!!!
Thank you, Thank you, THANK YOU!!!!!!
Dial: *#*#197328640#*#*
Click [1] debug screen
Click [8] phone control
Click [7] network control
Click [2] band selection
This is where you make a change, default setting is [1] automatic, which means it chooses automatically between gsm/cdma (Edge vs 3g). So we are going to change this and set it to wcdma band which is 3g.
Click [2] wcdma band
Click [1] wcdma all []
Now it should display “select wcdma all bands[*]"
Now on the bottom of your phone, click the menu key, it’s the one next to the home key, now click back, menu again one more time, back one more time, this is just to confirm it set to number 2 wcdma band.
Now click menu key one last time, click end.. and you are done. Now to double verify that the phone is locked into 3g, dial in: *#*#4636#*#*
Then click phone information Then scroll down to “set preferred network type” It should now have listed “wcdma only.” PS, if you tried to do a shortcut, and just set wcdma this way first without doing the lock above, it would just go back to gsm/cdma auto once you exit the screen.
Your phone should now be locked into 3g.
----------
Again found on Howard forumns and copied and pasted to word doc. to keep for my mum as she gets the phone.... I got her the the 27.50 holiday plan so she can call anywhere to anyone in North america with unlimited data....coverage is good so far...
P.S. i dont allow roaming as to not incure more charges.
I know this is an oldish thread but.
Trying to fix connection issues and the Dial code does not work for me. It just does nothing when I enter that. The only code that works is *#*#4636#*#* and that does not help me.
Anyone else having this issue and know why it's not working. I have an Amaze 4G. Only posting here about this phone because this is the only thread I could find related to my issue.
Searched all over now. Those codes are to be the only solution and they don't do anything on my phone.
Anyone have answers?
I have a mytouch 4g (it's actually the htc panache) that just suddenly wouldn't connect to the network after I restarted it. When I try to add a network manually, the only option I have is to connect to Canadian roaming...
hi
if you'll look into those threads
http://forum.xda-developers.com/showthread.php?t=1240704
http://forum.xda-developers.com/showthread.php?t=1247278
http://forum.xda-developers.com/showthread.php?t=1202666
http://forum.xda-developers.com/showthread.php?t=1245163
i was very busy looking where are all the WiFi Error come from.
i found the solution but its not final until Motorola release some update
to separate the WiFi network from Sprint Super idiotic apps "Sprint Zone"
i just reflash'd the phone with the MR5 after reflashing it over and over again
with the MR3 & MR5 updates.
the solution is yet simple and is only for those who using the GSM\UMTS network only until a fix will made by Motorola & Sprint :
after re-flashing the phone with RSDLite to MR5 it will ask you to activate the
phone account with Sprint Zone.
don't allow it because after the activation the phone will restart and will **** the **** out of the WiFi.
the Sprint Zone is looking for Sprint network every time you restart the phone
so you need to change it again to UMTS on every Restart
how to close the Sprint activation you say?
for those who dont have data connection available it will be more
easy the Sprint Zone requires Data connection or sending free SMS
with Domestic Call & Data to Activate the phone.
after the Activation fails change the network back to GSM\UMTS and un-tick Roaming Guards and the wifi returns to Normal.
the major problem is when restart the phone all of the Settings
that you have done will begone so you will need to wait
again 2~4 minutes the phone to "Fail" in activation in order to
regain WiFi and network activity.
hope that helps...
This is relevant to development.
Sent from my MB855 using xda premium
well..im in the right thread havn't ?
GUARDIANBD said:
well..im in the right thread havn't ?
Click to expand...
Click to collapse
No. I am glad your wifi is working. I would suggest posting in the general section as this is has nothing to do with the development of this phone or android.
ok so..may the devs be with me and move this thread to the right and suitable place?
Amen!
Here's the deal, I bought my Rezound in 2012 and flashed it to PagePlus Cellular using CDMA WS.
I've used it and it's been fine, running CM10 most of the time. I just bought a Evo 4G LTE and switched to that. So I RUU'd my Rezound, and it says a SIM card is required, etc.. but there are no signal bars.
I go into About Phone > Network >
and Operater name is "Unknown," signal strength is "0", service state is "out of service."
Now, the question is, is that normal? Does the phone need a sim card to connect to verizon towers?
I don't want to sell it while it's not working. I did call up Verizon and they said the ESN was clear for activation though.
So if I sell it and the new user puts in a SIM card, will it clear up all the signal issues? Or have I done the RUU incorrectly? [I did it a couple times because it didn't work the first time (the SD card method, then I did fastboot method)]
Thank you!
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
PhantasmRezound said:
That is not normal behavior and you may need to do some more work before you sell it.
Make sure all related network settings are correct for Verizon instead of GSM under Settings > Mobile Network menu.
Try entering on the stock dialer *#*#4636#*#* to access the hidden testing menu as well for the phone radio and verify it is on CDMA. If that code doesn't work on the dialer try it via an app like "Hidden Menus" or even "Battery Monitor Widget" by 3C (click "Tests" icon > Phone information from main page of app.)
Background: I broke off of my Verizon contract six months in and used my phone as a WiFi-only device (VoIP and internet texting apps) for the longest time. While I typically hid my signal icon and ran the phone in Airplane mode with WiFi toggled back on, I would occasionally turn my radio on to resync time and date to the cellular network. With no SIM in it clearly was syncing off Verizon CDMA signal still; I simply wasn't fully activated on the network any longer.
I just made the StraightTalk AT&T SIM card plunge the past couple of weeks and did an NV edit in CDMA WS as well, all alright on GSM. I am on the stock global ICS ROM at the moment, one I know could sync time on CDMA before. However, I cannot get the phone to switch off of GSM even in the hidden testing menu, even without SIM in... Likely has to do with the NV edits I made, and perhaps that may be your case too.
You *could* repurpose the sale as a GSM enabled unit... If it was even set up and working well as such. But due to the current technical issues of getting GSM mobile data above 2G I'd suggest to get it fixed and working back on stock CDMA for the consumer's sake if you can. Again AFAIK It should pick up a CDMA signal even without active service or the Verizon LTE SIM in, did so for over a year lol.
Click to expand...
Click to collapse
in the mobile network, I have it set to "CDMA / LTE" but I tried "CDMA only" and "Global" but none worked.
*#*#4636#*#* didn't work in stock dialer, it just disappeared when I finished typing it.
then I downloaded Hidden Menu, found *#*#4636#*#* in the list, tapped it, and it did nothing. I did some other ones and they did do something. I found htc diag mode, the same one I used to program it originally. I clicked read, and the phone number and min were blank. so I went to the prl and tried flashing a verizon prl file, then rebooted, and still nothing.
I'm going to try to RUU again and hope that solves it.
Update
I RUU'ed again, but still no luck..
Can anyone confirm whether or not, say you got a Rezound out of the box never activated, would you need a SIM card to get the signal initiated? I'm thinking either that's the case and my phone just needs a sim card to jump start it, or my rezound is toast.
phone says no sim card and i don't have data, still able to use sms and phone calls when I'm around wifi even if wifi is turned off. In settings/status under service state it says voice: in service / Data: in service. Under cellular network state it says disconnected. It recognizes my network: sprint and my cellular network type : lte and my phone number as long as I'm around wifi even if it's turned off. As soon as I get out of range for wifi all of that data in settings/status is "unknown" until i find wifi again and reboot. Was told to call the carrier and get a PIN to unlock my sim card but it didn't work. Any help please?
Since you're in the Sprint forum, and there's no official Sprint Lollipop ROM, I assume you're running an unofficial AOSP ROM. If so, the traditional sprint fixes (update profile / PRL, for example) won't work. If you have a nandroid of an official Sprint ROM, you might try restoring to that, updating Profile & PRL, enter ##72786# in the dialer (the phone will reboot a couple of times--that's normal) and then reinstall the AOSP ROM.
That may not help, so I'd suggest asking in the thread for the ROM you're running.
Standard htc one m9 with ATT. not rooted and up-to-date with android 5.1.
I went to domincan republic for 2 weeks and I purchased the att passport package. Once I was there, I searched for networks and used the Claro 4g network over there the whole time. Once I return to the US, the phone refuses to automatically connect to the ATT network and continues to search for the claro network.
What Ive done so far.
-muliple restarts
-remove sim
-When I go into network operators, both options "search networks" and "select automatically" are greyed out and I cant select them
-When the phone is restarted, the "network operators" screen pops up and lists ATT, sprint and verizon. But when I try select any of them, i get an error message saying "operation failed"
-ive reset the APN to default multiple times
Heres where it gets weird. I popped out the sim and put it into my htc one m7 and the phone works fine and connects to the att network. I can make calls and use the web. Once I place the sim back into the M9, it will connect to the att 4g network briefly. I can make a call to my voicemail very quickly once i gain service and it will work and I can browse the web during the call. Once the phone call hangs up, the connectivity bars slowly go down until i lose service and the a msg pops up saying "Claro Network unavailable". I can repeat this cycle over and over.
I tried placing the sim card back in and resetting the APN right away a bunch of times. This actually allowed me to stay connected to the ATT network for a few days. HOWEVER, I had to restart the phone and I was back to square one.
ATT was no help and they basically told me to hard reset the phone. WTF.
Any advice?
anyone?