use this method
Note – This method of rooting currently doesn’t allow you to flash new kernels (so no overclocking) but you can flash new ROMs.
Before we begin, check the software number on your phone by going to Settings->About Phone->Software Information.
Your software number should be 2.08.651.2 or LATER. If not, go do the software update under Settings->System Updates->HTC software update and start over.
For Mac users, please replace “fastboot” with “./fastboot-mac” in the instructions below.
For Linux users, please replace “fastboot” with “./fastboot-linux” in the instructions below.
Step 1. Download rootevo3dnew.zip file and unzip to root folder of your hard disk or desktop
http://downloadandroidrom.com/file/HTCEvo3D/rooting/rootevo3dnew.zip
Step 2. Put your Evo 3D in fastboot mode by first going to Settings->Power and make sure “Fast boot” is checked off.
Step 3. Turn off your phone then power up by holding down Power Button and Volume Down button.
Step 4. Hit Power again to enter Fastboot.
Step 5. Connect your Evo 3D to your computer, your phone should say “Fastboot USB”.
Step 6. For Windows, install the HTC drivers HTCDriver3.0.0.007.exe in the zip file. For Linux and Mac you don’t need to install drivers.
Step 7. Open up a command prompt in Windows by typing “cmd” under Start->Search and for Linux and Mac, open up a terminal.
Step 8. Go browse into the directory where you unzipped rootevo3dnew.zip, for Windows:
cd \rootevo3dnew
or
cd Desktop\rootevo3dnew
if you unzipped to your desktop.
For Mac and Linux, likewise:
cd /rootevo3dnew
or where you unzipped the files to.
Step 9. Next type:
fastboot oem get_identifier_token
You should get a bunch of code. If you don’t, you have an older OTA, go do the software update under Settings->System Updates->HTC software update and start over.
Step 10. Now, copy everything starting with <<<< Identifier Token Start >>>> and ending with <<<<< Identifier Token End >>>>> .
*Note – In Windows, when you copy, sometimes it adds a white space to the beginning, if you get errors, try copying the token to Notepad then getting rid of spaces before pasting it to HTC’s site.
Step 11. Go to HTCDev.com and sign up as a user. Then goto Unlock Bootloader->Get Started->Begin Unlock Bootloader. Agree to the legal terms, proceed all the way to Step 10 and paste the token you just copied.
Step 12. If you get errors, try the Notepad tip above, otherwise you should be getting a file called Unlock_code.bin as an attachment in your e-mail.
Download this file off your e-mail then copy the file over to the rootevo3dnew directory.
Step 13. Next go back to your command prompt/terminal and type:
fastboot flash unlocktoken Unlock_code.bin
Step 14. Go to your phone and hit the Volume Up button and then Power button to unlock bootloader.
Step 15. If you got this far, congratulations, your Evo 3D’s bootloader has been unlocked!!!
Step 16. Your phone will reboot.
Step 17. Put your Evo 3D in fastboot mode by first going to Settings->Power and make sure “Fast boot” is checked off. (Again, yes).
Turn off your phone then power up by holding down Power Button and Volume Down button.
Hit Power again to enter Fastboot.
Step 18. Type the following to install ClockworkMod Recovery:
fastboot flash recovery cwm-4.0.1.4-shooter.img
Step 19. Go back to your phone and choose Bootloader then hit the Power Button.
Then choose Recovery then hit the Power Button.
Step 20. When you get Revolutionary CWM blue menus, go to “mounts and storage” using your Volume buttons and hit the Power button.
Then choose “mount USB storage” and hit the Power button.
Step 21. Go to your computer and copy over su-2.3.6.3-efgh-signed.zip to your Evo 3D.
Step 22. Go back to your phone and hit Power button to get out of USB mode. Then choose “+++++Go Back+++++” and hit the Power button.
Then choose “install zip from sdcard” and hit the Power button.
Then choose “choose zip from sdcard” and hit the Power button.
Then choose su-2.3.6.3-efgh-signed.zip and hit the Power button.
Choose “Yes” and hit the Power button.
Step 23. Reboot and enjoy root!
FAQ
After rooting my Evo 3D using HTC Unlock method, I still get S-ON?
It doesn’t matter, the HTC Unlock method gives you a fully unlocked bootloader, the S-ON is meaningless once you unlock as you can install recovery and ROMs.
You CAN flash Kernels with HTC Method!!!!!
and really another one of these guides?
Related
My girl has the HTC EVO 3D and I'm trying to downgrade the Hboot from 1.5 to 1.4. Is there a way to do this with just using a Windows PC? I don't have Linux. LMK. Thanks
You need to download a linux live cd or you can download this one in this thread.
http://forum.xda-developers.com/showthread.php?t=1563342
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Tutorial for S-Off & Rooting EVO 3D GSM Hboot 1.49.0007
-1.49.0009 & 18 + S-On Checking Hboot version: Step 1:
Unlock phone. Step 2: On your EVO 3D select settings. Step 3:
Select Power. Step 4: Uncheck Fast Boot if it isn't already
unchecked. Step 5: Hold the Power Button and select Power
Off. Step 6: Wait for phone to completely Power Down. Step 7:
Hold the volume down button and then press and hold the power
button at the same time untill a white recovery screen
appears. Step 8: Note down your Hboot version for future
reference. Step 9: Select Reboot using volume keys and power
button. Note before proceeding: Hboot: 1.49.0009 &
1.49.0018 Please follow the following guide:
http://forum.xda-developers.com/show....php?t=1316578 Make
sure to thank ngod for his work. (Credit to Navrasis - here)
Downgrading Hboot to 1.49.0007 if needed: . This instruction
for all version hboot and all main version. Downgrade to
hboot 1.49.0007 1. Download all the files. PG86IMG.zip
Official firmware with European HBOOT 1.49.0007. xvi32.rar
xvi32 hex editor. adb.rar adb.exe and fastboot.exe. 2. You
need unlock and root your phone. htcdev.com for unlock your
phone. 3. Plug Evo 3D in charge mode. 4. Extract adb.rar to
C:\ Run command line and enter next commands cd c:\adb adb
shell dd if=/dev/block/mmcblk0p31
of=/mnt/sdcard/mmcblk0p31.img Dont close command line and
plug your sd card. 5. Extract xvi32.rar and open
mmcblk0p31.img. Change version in xvi32 1.22.720.1 to
1.20.720.1 and save file. (You version may be different? you
need change it to 1.20....) 6. Plug your phone in charge
mode. Go to command line and enter this command adb shell dd
if=/mnt/sdcard/mmcblk0p31.img of=/dev/block/mmcblk0p31 adb
reboot-bootloader \\Change CId fastboot oem writecid HTC__001
\\Lock bootloader fastboot oem lock 7. Power off phone.
unplug battery and copy PG86IMG.zip to root SD card. Then
power off phone to bootloader (vol down+ power button).
PG86IMG.zip cheking from phone< then you need press vol up
for update, or vol down for not update. Press vol up. Wait.
You have hboot 1.49.0007.) Congratulation.) 8.Unlock
bootloader from htcdev.com and s-off from revolutionary.io.
P.S. All manipulations you do at your own risk. S-Off &
Root Pre Installation: Download & Install
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe Step 1:
Open a web browser window & navigate to:
http://revolutionary.io/Step 2. Scroll down to Downloads and
select appropriate operating system and download zip file
(this tutorial currently only covers windows OS series)
(minimize browser window after this) Step 3. Extract to
C:\rev\Step 4. Connect phone in charge only mode. Step 5.
Open settings on the phone and select Applications ->
Development -> Check that USB Debugging is checked. Step
6. Open my computer or explorer to c:\rev\Step 7. Right click
and select run revolutionary.exe as administrator Step 8.
Copy down the device serial number (minimize command prompt
window) Step 9. Open back up your browser window Step 10.
Enter your serial number and select generate key Step 11.
Copy generated key into the command prompt window. Step 12.
Follow on screen prompts as the phone will S-Off. When asked
to flash clock work recovery select y and then the enter key:
Step 13. To root the rom permanent download
http://goo-inside.me/superuser/su-2....fgh-signed.zip Step
14. Transfer the zip file just downloaded to the SD card and
flash via the new recovery (Power On + Volume Down the select
recovery.) (If you get a triangled exclamation clockwork
didnt install) Go down the bottom of this post for
instructions. Step 15. Reboot phone and it should all be
done! S-On for warranty purposes: (WARNING: Some users have
reported failures not sure if this is due to device
compatibility..) It worked for me on a phone with 1.49.0007 -
SFR France) (WARNING: YOUR ORIGINAL RUU MUST BE FLASHED
FIRST!!!) (WARNING: Check you have reverted back from the
revolutionary HBOOT should be the one that came with your
phone!!!) Step 1. Download applicable rom from this thread:
http://forum.xda-developers.com/show....php?t=1208485 Step 2.
Flash rom from attached thread. (PG86IMG.zip method from
bootloader) Step 3. Download and extract android SDK Step 4.
Connect phone in USB debug mode Step 5. Open an elevated
command prompt and cd to the extracted tools folder Step 6.
type "adb reboot bootloader" Step 7. type "fastboot oem
writesecureflag 3" Step 8. type "fastboot reboot-bootloader"
Thats it! reboot and check S-On via (Power + Vol Dwn)
Flashing CWM after Revolutionary: Step 1: Download and
extract the Android SDK Step 2: Download
http://downloads.unrevoked.com/recov...4-shooteru.img Step 3:
Transfer the above step file into the tools folder of the
extracted SDK in step 1 Step 4: Open a windows command prompt
right click and run as administrator Step 5: cd to the
extracted tools directory Step 6: reboot your phone holding
the (power + vol down) Step 7: Plug in the phone and wait for
usb fastboot to appear Step 8: In command prompt type
"fasboot flash recovery cwm-4.0.1.4-shooteru.img" Step 9:
Wait for completion after completion you can resume steps 13
- 15 above. (Make sure fastboot is enabled as it was disabled
in previous steps) Keep in mind everything is provided as is
and everything is done at your own risk and acceptance of
said risks.
Sent from my HTC EVO 3D X515m s off using xda premium
Hello,
I've rooted my atrix today using rootzwiki without any problems and there was a boot loader unlock tutorial, my device is 2.3.4 4.5.91 at&t but unfortunately I used .sbf for international users and not for at&t..ending up with "no os" no boot/recovery so tried to flash "1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf" (mistake?) with no success, then flash "4547-fix-try2.sbf" for at&t but no success.
Don't know what to do Plz help me
Download fastboot here:
http://dl.dropbox.com/u/30173981/fastboot.zip
Download a ROM such as
CM7 Based ROM (Neutrino ROM)
http://forum.xda-developers.com/showthread.php?t=1398819
CM9 Alpha/Beta
http://forum.xda-developers.com/showthread.php?t=1445052
http://forum.xda-developers.com/showthread.php?t=1500535
OR Blur Based Rom (NottachTrix4G)
http://forum.xda-developers.com/showthread.php?t=1567241
Have the ZIP file ready
Extract contents of the fastboot zip in the c drive root in a folder called "fastboot" without the quotes
Install the Motorola Drivers, included in the fastboot folder I provided
Next, download a recovery, such as romracer's recovery
http://forum.xda-developers.com/showthread.php?t=1204500
(Rename img file to recovery.img)
And put the recovery.img file in the fastboot folder
Open a command window (Start > Run > CMD OR Start > type 'Command Prompt'), type "cd\fastboot" without the quotes > Press enter
Next power on phone, in fastboot mode (hold power button and volume down and press volume down to look for fastboot, volume up to select it), plug it in
Go to your command window and type
"fastboot flash recovery recovery.img” without the quotes
Once that is done, do
"fastboot reboot" without the quotes
Once the phone is at the Motorola logo, power it off.
Power it back on and go into Android Recovery (hold power button and volume down and press volume down to look for Android Recovery, volume up to select it), plug it in
(recovery navigation is volume up/down is up and down, select is power button)
From here, go to mount and storage and mount USB and dump the rom zip in the root and go back on the phone and factory reset, wipe cache and install zip from SD card. Find the zip file and install it. Once that’s done reboot and your phone should boot up in the ROM of your choice.
TNX! but it fails to flash recovery
Leonoduzit said:
TNX! but it fails to flash recovery
Click to expand...
Click to collapse
You did not unlock your boot loader, download this if you have an at&t atrix
http://diamantephoto.com/pudding.rar
or if its an international atrix
http://diamantephoto.com/IHOP_Bell.rar
download the sbf and flash using rsdlite and retry my steps again
OK OK
Once you enter that line, if you don't get an error make sure the command prompt says "C:\path\to\fastboot\ > __" confirming that you are working in the right directory. Now type 'fastboot oem unlock' (fastboot tells command prompt to work with fastboot.exe and oem unlock is a command within the program). It will reply a warning about breaking warranty, etc., and also a lengthy ID for your phone.
Now type 'fastboot oem unlock ####' where #### is your ID. And finally 'fastboot reboot'. Your phone will obviously restart and you can close out of the command prompt.
When turning on your phone will say! "Unlocked" on the Motorola boot screen, jump up and down in joy!!!
Sorry, I did not give the link to the pudding thread; those are the instructions
Sent from my MB860 using XDA
i am running stock 4.0.4 ICS on XPERIA S. official... bootloaders have been unlocked... i wanna root my phone.. is there any way?? please help!!!
stock ics.. i dont wanna revert to GB again.. root the ics phone directly.. any solutions.. please help.. im INDIAN
If your bootloader is unlocked, just flash Advanced Stock Kernel.
Root your XPS
Refer the next post.
Root your XPS
Download the following all the files that i have attached and save the files on your PC and put a copy of recovery,CMW superuser.zip and kernel.sin on your device. (DONT FORGET TO EXTRACT Kernel.sin from kernel.zip)
1. Place the files on your computer.
2. Extract files from fastboot.zip
3. Copy kernel.sin and recovery.img in the same folder where you have extracted fastboot files. (Paste extracted kernel.sin in this folder too)
4. On your device go to Setting-->Developer option--> USB debugging mode. Select it.
5. Now switch of your fone. Wait for few seconds
6. Now keep pressing Vol up button and connect your fone through USB cable to your desktop.
7. You will see BLUE LED turned on. Now your fone is in fastboot mode.
8. Now go to the folder where you unzipped the fastboot files and press SHIFT key + Right mouse button.
9. You will see an option "Open command window here".
10. In that window just type the following command :
fastboot flash boot recovery.img
11. After the process completes. Disconnect your fone. Turn on your fone and keep on pressing Vol up key. You will be in recovery mode.
12. Scroll in menu using volume keys and to select option use switch on/off key.
13. Select option "Install from SD card".
14. Go to the location where you have copied the "CWM-SuperSU-v0.95.zip".
15. Just go into the zip file by turn on/off button. you will see the installation file superuser.apk. Just click on it by using turn on/off button.
16. Super user will be installed.
17. Now turn off your fone. (Dont worry if your fone keeps booting in recovery mode. you just need to be little quick. As soon as you turn it off just keep pressin vol up key and connect to your pc.)
18. Now press volume up key and connect your fone through usb cable to computer.
19. Now the go into the command prompt and type the following command:
fastboot flash boot kernel.sin
fastboot reboot
Above method worked for me and my fone is rooted.
PLEASE DON'T BLAME ME IF YOU BRICK YOUR DEVICE.
ill try
bhanujallandhra said:
Download the following all the files that i have attached and save the files on your PC and put a copy of recovery,CMW superuser.zip and kernel.sin on your device. (DONT FORGET TO EXTRACT Kernel.sin from kernel.zip)
1. Place the files on your computer.
2. Extract files from fastboot.zip
3. Copy kernel.sin and recovery.img in the same folder where you have extracted fastboot files. (Paste extracted kernel.sin in this folder too)
4. On your device go to Setting-->Developer option--> USB debugging mode. Select it.
5. Now switch of your fone. Wait for few seconds
6. Now keep pressing Vol up button and connect your fone through USB cable to your desktop.
7. You will see BLUE LED turned on. Now your fone is in fastboot mode.
8. Now go to the folder where you unzipped the fastboot files and press SHIFT key + Right mouse button.
9. You will see an option "Open command window here".
10. In that window just type the following command :
fastboot flash boot recovery.img
11. After the process completes. Disconnect your fone. Turn on your fone and keep on pressing Vol up key. You will be in recovery mode.
12. Scroll in menu using volume keys and to select option use switch on/off key.
13. Select option "Install from SD card".
14. Go to the location where you have copied the "CWM-SuperSU-v0.95.zip".
15. Just go into the zip file by turn on/off button. you will see the installation file superuser.apk. Just click on it by using turn on/off button.
16. Super user will be installed.
17. Now turn off your fone. (Dont worry if your fone keeps booting in recovery mode. you just need to be little quick. As soon as you turn it off just keep pressin vol up key and connect to your pc.)
18. Now press volume up key and connect your fone through usb cable to computer.
19. Now the go into the command prompt and type the following command:
fastboot flash boot kernel.sin
fastboot reboot
Above method worked for me and my fone is rooted.
PLEASE DON'T BLAME ME IF YOU BRICK YOUR DEVICE.
Click to expand...
Click to collapse
ill try and do whats mentioned above... thanx for the quick response... i dint want brick my phone or do something hafazard.. is there a way to find out if my phones bootloader is unlocked properly or not??
Command prompt error
sivramkaushik said:
ill try and do whats mentioned above... thanx for the quick response... i dint want brick my phone or do something hafazard.. is there a way to find out if my phones bootloader is unlocked properly or not??
Click to expand...
Click to collapse
THe command prompt not accepting the code "fastboot flash boot recovery.img".. what do i do.. done the earlier part
sivramkaushik said:
THe command prompt not accepting the code "fastboot flash boot recovery.img".. what do i do.. done the earlier part
Click to expand...
Click to collapse
Don't go through this pain dude.. As you have already unlocked your bootloader than simple flash an advanced ICS kernel and enjoy
Q&A for yuphoria usb driver
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for yuphoria usb driver. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nikhil3737 said:
i am unable to connect my phone while in fastboot mode,.........due to driver issue,,......please provide me a link for the driver
Click to expand...
Click to collapse
Before anything please note to disable Driver Signature Verifications in Windows (Google it).
Than download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
Now boot into fastboot mode -
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from here and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Step 8. Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
Step 9. After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Yu-Yuphoria-Rooting-Commands
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Strep 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Download the TWRP file for the phone here and paste the same on the ADB folder on your C drive.
Step 4. Download the SuperSU zip file here and save on your phone internal SD card.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
here is the solution
nikhil3737 said:
i am unable to connect my phone while in fastboot mode,.........due to driver issue,,......please provide me a link for the driver
Click to expand...
Click to collapse
Before anything please note to disable Driver Signature Verifications in Windows (Google it).
Than download Universal Naked Drivers
from--
http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/
Now boot into fastboot mode -
In the Device Manager locate your Android device. Then right-click on it and select "Update Driver Software".
Select "Browse my computer for driver software".
Select "Let me pick from a list of device drivers on my computer".
Select "Show All Devices".
Press the "Have Disk" button.
Enter the path to the Google USB driver. (path where you have extracted universal naked drivers)
Select "Android bootloader Interface" from the list of device types.
Confirm the installation of the driver by pressing "Yes".
Confirm the installation again by pressing "Install".
When the installation is done, press "Close".
50 % done :good:
**NOW BEGINS THE ROOTING**
Step 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Now install the ADB and Fastboot file on your windows desktop from here and the setup will create a ADB folder on your C Drive (C:\adb)
Step 4. Connect your phone with PC/Laptop.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now open the ADB folder on your desktop the same folder that you created in Step 3. In the folder press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command to confirm if your YUphoria is detected by PC in Fastboot Mode or not:
fastboot -i 0x2A96 oem devices
Step 8. Now Run the following command to unlock bootloader:-
fastboot -i 0x2A96 oem unlock
Step 9. After that to reboot the phone run the following command:-
fastboot -i 0x2A96 reboot
Yu-Yuphoria-Rooting-Commands
Now the bootloader is unlocked and next step is to install TWRP and root the phone.
INSTALL TWRP AND ROOT YU YUPHORIA
Strep 1. Enable the USB debugging on your phone. Go to Settings > About Phone > Scroll down and tap build number 7 times until you will see a popup stating ‘You are now a developer.
Step 2. Now go back and you will see the Developer option on the settings just above About Phone. Open it and enable it and turn on Advanced Reboot option, Now scroll down and turn off Update Cyanogen recovery.
Step 3. Download the TWRP file for the phone here and paste the same on the ADB folder on your C drive.
Step 4. Download the SuperSU zip file here and save on your phone internal SD card.
Step 5. Press and Hold Power button, then select and hold Reboot. You will get four options. Select the one stating Fastboot Mode.
Step 6. Now again open the ADB folder and press the Shift key on your keyboard, right click in the folder in blank area and select Open Command Prompt Here.
Step 7. Now run the following command on your phone to install TWRP:-
fastboot -i 0x2A96 flash recovery twrp.img
Step 8. Once flashed phone will restart and boot it into Recovery mode. Press Volume Up+Volume Down+Power button altogether. YUphoria will boot into recovery mode TWRP which was flashed by you.
Step 9. Once you are on recovery mode. Select Install zip >> Choose zip from /sdcard >> 0/ >> Select Supersu.zip >> Yes – Install Supersu.zip
Step 10. Go Back and Select Wipe Cache Partition >> Yes Wipe. >> It will take 2-3 minutes to wipe.
Step 11. After this select advanced and select Wipe Dalvik Cache >> Yes Wipe.
Step 12. And now select Reboot System Now >> Yes.
Now your phone will reboot and first boot will take some time, So, Be patient. Now, you phone is rooted. Enjoy.
Yup Same here
Yeah!
I installed Pdanet+ and minimal adb & fastboot etc! Not working!
disabled usb debugging and i am stuck on yu logo
QA Bot said:
Q&A for yuphoria usb driver
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for yuphoria usb driver. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
i installed custom recovery on my android and custom boot file but i am stuck on yu logo. when i connect my mobile to pc in fastboot mode, in devices it shows that drivers are properly installed(i installed the drivers you told Pda Net+) but when i give fastboot command it show "waiting for the device"
Hi, guys. I'm Sakib Hasan. This thread is for them who want to root Symphony R100. Today I'm gonna tell you how to Symphony R100. Let's start.
What you need :
1. A 'Symphony R100' (2GB or 3GB; both works).
2. A 'PC'. If you are using Windows 8 or 10 then you need to disable 'Driver Signature Verification'.
3. Universal ADB drivers.
4. SuperSU and TWRP recovery.
Now follow this instruction :
(Bootloader must be unlocked. Otherwise this won't work. I will tell 'How to unlock bootloader' in my next post.)
1. Download the SuperSU and Twrp in your PC and extract it.
2.Get SuperSu.rar to your android and place it on the root of SD card.
3. Go to Developer Options on your phone and tick the 'OEM Unlocking' and 'USB Debugging'. (If you don't find Developer Option then go to About Device and tap the BUILD NUMBER for 7 or 8 times).
4. Now connect your android to your PC using USB cable.
5. Now Install Universal ADB drivers and go to the file where you have installed it on your PC. Now hold Shift button and then press mouse right button and click on ' Open CMD here.'
6. After that, type - 'adb devices' on CMD and press Enter. Now it will show a device number and the word 'device'. Example :- 12345abcde device (If it shows the word 'unauthorized' then see your phone and allow your PC to USB debugging).
7. Now type 'adb reboot bootloader' and press Enter. Now look at your phone. Your phone will reboot in bootloader. Don't panic. Your phone will be OK.
8. Now type 'fastboot devices' and press Enter button. It will show a device number and the word 'fastboot'. Example :- 123456889abcd fastboot
9. Now type 'fastboot flash recovery' (don't press Enter button) and copy and paste that twrp img on the CMD and press Enter button. Now recovery will be flashed.
10. Now type 'fastboot reboot' and press Enter button.
11. Now type 'adb wait-for-devices' and press Enter button.
12. Now type ' adb reboot recovery' & press Enter button. Your device will reboot into recovery mode and you will see TWRP is installed on your device.
13. Now tap on Install.
14. Find the SuperSU.zip and tap on it.
15. Now you will see 'Swipe to confirm flash' bar. Swipe it and wait for about 30 seconds. SuperSU will be installed on your device.
16. Now tap on 'Reboot System'. Your device will be rebooted.
17. Now you will see SuperSU app is installed on your device.
18. Go to Play Store and search and install a root checker app. Now open the app and check that your device is rooted or not. I'm sure you will see your device is rooted.
In my next post I will tell you how to unlock bootloader.
If you have any problem please comment or inbox me. Stay with me.☺☺
And tell me is it helpful for you or not.☺☺
I tried rooting my phone and it worked!
But I somehow wiped the whole EMMC!!
Now there is no ROM !!
I need the stock ROM for symphony R100 2GB
It will be really a great help if you share the ROM
T I A
How Can I Unlock Bootloader & Root & Install TWRP in symphony V110