Hi community,
I tried to pair my phone with my laptop (Bluetooth) and I didnt succeed so far. My laptop is recognized by my phone, Com 7 is activated but the proposed passwords by the phone, i.e. 0000 or 1234 do not fit. Pairing is always refused?
Any help would be appreciated.
Update: I just succeeded to pair my two devices. But I failed when I tried to send a file to the laptop?
albert12 said:
Hi community,
I tried to pair my phone with my laptop (Bluetooth) and I didnt succeed so far. My laptop is recognized by my phone, Com 7 is activated but the proposed passwords by the phone, i.e. 0000 or 1234 do not fit. Pairing is always refused?
Any help would be appreciated.
Click to expand...
Click to collapse
I did that with my win7 Microsoft Bluetooth stack failed to get it works. I need to download my phone content to my pc. I use this stock ware ''kies air'' as long as ur laptop and ur s2 connected to the same network u can connect to ur phone with ie or firefox by entering the address given in kies air.
Sent from my GT-I9100 using XDA Premium App
Related
The problem is in the cable .
my phone now without software, and when i want to connect it with the personal computer via cable it dosn't connect
what ever in the past i was used bluetooth device to connect with pc
but after the format I cant use it.
I hope someone to help me, and aplogize me to my english
[email protected]
Hi there,
I upgraded to WM5 but wanted to downgrade to WM2003. But halfways the downgrade the PDA hung. The only thing I can see in the screen is Serial at the top and v1.06 at the bottom. When I put the PDA in the cradle, Serial changes into USB. When I try to install firmware from a ROM, after a while I get an Error 101: Connection Error. I think that in some way the connection cannot be esthablished between cradle (PDA) and the computer.
Trying a soft or a hard reset doesn''t seem to do anything.
Can anyone help?
MDA II
i have the same problem. it keeps on giving me a connection error. please can some one help.
the same problem with SPV M1000. anyone have the solution?
do a hard reset guyz by this method
HOLD DOWN UR POWER BUTTON+RESET (pin at bottom)..u will see 1.06 or what ever ur bootloader version is at bottom and at top u will see SERIAL..when u connect it to USB it will change to USB....and VOILA !!!
Happy Flashing
Same Problem
Did as you said and my computer doen't pick up the connection through the cradle. HELPPPPPPPP!!!!!!
prob
HERE already tried to hardreset and then trying flashing
but can't sucess
The same problem..
we are on the same trouble...
until now, there's no way to resolve this problem,
the lucky if we can connect to PC,
i think its the connector problem,
maybe using a new sync cable rather then the cradle then
the cradle was always hit or miss for me
but i still had my wallaby cradle which always worked
Rudegar said:
maybe using a new sync cable rather then the cradle then
the cradle was always hit or miss for me
but i still had my wallaby cradle which always worked
Click to expand...
Click to collapse
I have tried about 3 different cables and the cradle one.
and so tried to 3 different PC's to connect and got same error
btw, thanks...
From what I've seen so far problems can be caused by:
1. A firewall needs configuring or temporary disabling.
2. The usb connection shouldn't be through a hub but straight to the usb on the motherboard.
3. Dubious connection to the cradle.
rhilton said:
From what I've seen so far problems can be caused by:
1. A firewall needs configuring or temporary disabling.
Click to expand...
Click to collapse
my firewall is active exception activesync service
some time disable
2. The usb connection shouldn't be through a hub but straight to the usb on the motherboard.
Click to expand...
Click to collapse
i have modding motorola like e398, e1, e2, L7, v3i etc before
i never use USB-hub, i have 8 port USB straight to motherboard,
3. Dubious connection to the cradle.
Click to expand...
Click to collapse
i dont understand about this (dubious ?)
when dopod 838 friend connected to my PC it was OK, no problem,
thanks rhilton
no pc usb connect
Have checked your phone connector? it happened to me once:1 pin was out and no way to sync !!!
CENTER]ion[/CENTER]
imamlab said:
my firewall is active exception activesync service
some time disable
i have modding motorola like e398, e1, e2, L7, v3i etc before
i never use USB-hub, i have 8 port USB straight to motherboard,
i dont understand about this (dubious ?)
when dopod 838 friend connected to my PC it was OK, no problem,
thanks rhilton
Click to expand...
Click to collapse
Pls help
Have d same problem and i've tried all these but no change. Any newer ideas ?
Pls help
Have d same problem and i've tried all these but no change. Any newer ideas ?
Pls help
Have d same problem and i've tried all these but no change. Any newer ideas ?
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
I would backup my files and factory reset the tab. Should help.
i have done factory reset twice
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I often connect my tablet to my Win7 PC so I can copy TV shows from Media Center to the tablet. Sometimes the PC doesn't recognise the tablet unless I power down the tablet and turn it back on again. No idea why though.
follow this
download samsung 7510 usb drive, then download kies and last download windows media 11. if your xp its not original, follow some tutorial on youtube about how to install windows media player 11.
i has this issue with windows xp few days ago..
z31k said:
Make sure debugging is unchecked.. What version of windows are you running?
I find that my tablet will not recognize on XP or Window 7 since I have owned it. (Google I/O bought in July of last year) Once I installed CM9 it would then be recognized through Macbook Pro Android transfer.. (something like that. I sold the Macbook awhile back) I resort to Dropbox.. Its a *****.. But I don't complain and I stream most of my files anyway...
Click to expand...
Click to collapse
if you can't connect to a pc, then how were you able to install cm9?
mawells787 said:
if you can't connect to a pc, then how were you able to install cm9?
Click to expand...
Click to collapse
Actually you can. I don't know how he did it but if you want to know here's what I did.
Go here: http://forum.xda-developers.com/showthread.php?p=15693193.
You can root through an update.zip, flashed from the stock recovery (at least for the 3g version). After that install rom manager and flash cwm. Finally download cm9 or aokp or everything else you want and flash away!
Btw, I have no problem connecting to PC. I just did it that way.
Sent from my amazing 10.1 galaxy tab
PC recognizes the tablet but...
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Dominus357 said:
The pc recognizes my tablet, but even after it says safe to use, the tablet never shows up under my computer to transfer files. Any suggestions?
Click to expand...
Click to collapse
Do you have MTP enabled under storage > USB computer connection?
Same Problem
ammad53 said:
My galaxy tab 10.1 is on 3.2 honeycomb official. Its not rooted and its 3g version
My tab would not connect, i have searched for many forms, i could not find the solutions.I have done factory reset twice and have reinstalled kies twice also. My problem still persist. When i connect my tab to my laptop which is running on Windows 7. Three thing happens
1. Some time it will show mtp initializing and then it shows usb connected (mtp connected). No where is galaxy folder on my computer is found. When i go to devices and printer. No galaxy tab icon is shown.
2.Some times, galaxy tab charges only, there is no mtp instializing like 1 scenario etc
3. Nothing will happens.No mtp instializing or no charging
Lastly i have tried on my destop computer and another laptop but the problem still persist
Help would be appreciated.
Click to expand...
Click to collapse
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
deepakgupta said:
I bought a new Samsung Galaxy Tab GT-P7500 yesterday, unboxed it and when i connected it to my laptop for the first time, it showed this problem.. When i connect it to my laptop, it says MTP Initialization, with a message on my laptop "USB Device not recognised" & a 'X' on the battery of my tablet.
I have tried to reinstall the usb drivers & kies several times, but still i am having this problem.. i have bought a new one and not able to use it for 2 days now.. feeling very sad.... Please Help....!!
Click to expand...
Click to collapse
XDA is no longer worth my time.
TimOster said:
Read the Kies information on Sammy's site. Make sure you have the settings as they tell you. You can make the tab act like this if USB Debugging is turned on for instance.
Click to expand...
Click to collapse
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Problem with computer not seeing phone
deepakgupta said:
Thanks for your advice, but i have done everything right as descibed in manuals, but still i am unable to connect my tab to my laptop, as usb connection is the only way to connect, i am feeling very disturbed.... Please help......!!
Sent from my GT-P7500 using xda app-developers app
Click to expand...
Click to collapse
I had problem with my phone not being seen by my computer, I tried almost everything I read on these forums,
and nothing work, uninstalled drivers, changed settings on my phone, still nothing, then at last I change the setting
by dialing *#7284# (phone utility) made sure UART was set to PDA, USB set to PDA then Qualcomm USB Settings set to MTP,
now my computer sees my phone, I hope this will help others, it worked on mine, I have a Sprint Galaxy Note 2 flashed to Page plus,
with the help of Viper32, I get 3g service, pic messaging etc....
Evening all I'm hoping someone here might be able to help me sort this little problem I have here. I am trying to pair my phone to my pc which has a small Bluetooth dongle installed in it.
I have windows 7 on the pc and Omega v45 ( 4.2.2 ) yet everytime I try to connect I get various problems. When windowz detects the phone it comes up with an issue locating a driver and just shows Bluetooth peripheral Device driver unknown, ie it can't find it.
I am wanting to run the EVGA Precision app ( https://play.google.com/store/apps/...lt#?t=W251bGwsMSwyLDEsImV2Z2EucHJlY2lzaW9uIl0.) and run that from my phone but no matter what I try I can't get my phone and PC to talk to each other.
Has anyone else had this issue and been able to fix it please.
Hey mate,
does other devices can connect properly to your PC ?
which BT provider do you use ?
eytan123 said:
Hey mate,
does other devices can connect properly to your PC ?
which BT provider do you use ?
Click to expand...
Click to collapse
Everything else works fine i just can't get the bluetooth to sync from the phone to the PC
Hi all. So I'm trying to get my watch out of demo mode and download new firmware via Odin3. I put the watch into download mode and it connects to the laptop with an IP address but Odin does not see the IP address. I've downloaded all necessary files, installed Samsung USB drivers for Windows
Is there something I'm missing. I've searched everywhere I've found tutorials for issues with USB connected devices buy nothing for devices connected through WIFI
Thanks for any help
Galaxy Firmware - How to Flash Samsung Galaxy Watch3 SM-R840
How to Flash or unbrick Samsung Galaxy Watch3 SM-R840 with Odin tools.
galaxyfirmware.com
Try using a USB cable, idk how the watch connects so try that.
Odin usually only connects with usb cable
Keno_I said:
Galaxy Firmware - How to Flash Samsung Galaxy Watch3 SM-R840
How to Flash or unbrick Samsung Galaxy Watch3 SM-R840 with Odin tools.
galaxyfirmware.com
Try using a USB cable, idk how the watch connects so try that.
Odin usually only connects with usb cable
Click to expand...
Click to collapse
The link you provided is for a wireless connection to Odin since the only way to plug into USB port would be to remove the back of the watch and attach a cable by soldering to the MB of the watch itself, the watch connects like a hot-spot through IP address
Im not sure odin works wirelessly...
The wireless is for debugging but odin dosent connect wirelessly...
Pretty sure you need to connect the charging station to the PC via USB, as opposed to the watch. In the article you linked it shows that it has a COM connection, which is almost certainly a local USB port. COM can be used over TCP/IP but it's not a usual thing. You should have gotten a USB cable with the docking station surely?
So last night was success, I did manage to flash the watch with new firmware wirelessly. It is not longer a demo watch, I'm so very pleased since it unlocks the phone full capabilities, launching Odin3 as administrator allowed it to pick up the IP of the phone, took a little over 9 minutes to accomplish.
Thanks for all the responses to my query
Regards
MikeThor said:
So last night was success, I did manage to flash the watch with new firmware wirelessly. It is not longer a demo watch, I'm so very pleased since it unlocks the phone full capabilities, launching Odin3 as administrator allowed it to pick up the IP of the phone, took a little over 9 minutes to accomplish.
Thanks for all the responses to my query
Regards
Click to expand...
Click to collapse
Nice!