I ve got this weird problem. While on a call using the headset the volume is very low. But the music volume is fine and loud.
I tried entering service mode *#*#197328640#*#*
there when I select option 5 AUDIO nothing happens and all other options work.
Currently I am on KPN 2.3.3 FLA.SH 2.3.
So please help me fix this problem.
PS- Volume +, Equilizer, DSP manager etc do not work.
I have tried Google as well as searching the forum for related posts. but couldn't find any help.
I d very grateful if someone could help me.
Thank you
Click to expand...
Click to collapse
So after waiting for couple of days and no reply from any member and my constant battle with the phone gave me some answers...
I flashed XXKPH and then tried to goto Service Mode and then Audio ... VOILA!!! It works...
So for those who are in KPN or KPN based firmware eg. fla.sh 2.2 ..Good news
You can now hack the in-call volume to get it louder and use it outdoors ..
INSTRUCTIONS:
Requirements:
1. Rooted Phone.
2. RootExplorer or some other explorer with root permissions. can also use adb if u know it .
1. copy the attached file using root exporer to /system/app
2. Edit permissions to rw-r-r and REBOOT
3. Open Dialer and type *#*#197328640#*#*
4. Navigate as
[5] Audio >> [2] Headset >> [2]RX Value >> [1] Rx Codec/Volume >> [1] Rx Codec Gain:
5. Select it and input value ffff
the result will be 12db
P.S.
1. Dont forget to backup your original settings as well as the original servicemode.apk, just in case
2. If you can already access the Audio settings then skip the copying part just go ahead with the value editing.
CHEERS
If i helped you then Press thankx...
BTW: I am disappointed by the community support for Galaxy Ace, because before this i had Galaxy5 and the thread there was superb. Ask anything and you will get n answer no matter what, atleast u would know that noone can help you rather then just view the post and pass by. I m a medical student and do not know much about android , just trying to play my part.. Thank you
I'm using cyanogenMod7.2 RC1 BY VO-1 MIRACLE and I notice that the in-call volume is too low. I've notice in other roms.
Can I use your solution with this rom?
Thanks
tiagobouca said:
I'm using cyanogenMod7.2 RC1 BY VO-1 MIRACLE and I notice that the in-call volume is too low. I've notice in other roms.
Can I use your solution with this rom?
Thanks
Click to expand...
Click to collapse
no because those codes will work on stock roms only
just clean ur speaker.
simply get service manual or find video on youtube and do like it's said there. but be very careful.
Related
i clean installed a rom but forgot how to get into the menu and change the audio levels?
Don't know what you meant, but there are some threads related to Volume Boosting,
1- http://forum.xda-developers.com/showthread.php?t=1069015
2- http://forum.xda-developers.com/showthread.php?t=1127103&highlight=Volume++
3- http://forum.xda-developers.com/showthread.php?t=1146825&highlight=Volume++
Regards.
Do you mean system sound levels etc in settings /sound ??
jje
found it just after posting this thread. typical. i meant as in a code you enter to get access to menus and up the audio levels.
ta guys
Hi,
Like many of you you are not able to change the Audio settings in Service mode on your Galaxy S II after updating to 2.3.4+ or after updating to ICS. I for one need to re-enable WB AMR, which significantly increases your voice call quality. Some others like to change the setting to increase call volume outgoing or receiving.
Seems like Samsung removed this menu to prevent users from filing warranty claims after mucking with their audio settings.
Can someone please post their Service Mode APK that allows you to enter into the [5] Audio category?
If you were unaware, you can enter service mode on the Galaxy S II by dialing *#*#197328640#*#*
-rw-r--r-- 1 root root 118051 Mar 1 21:52 /system/app/serviceModeApp.apk
Still no one ?
@Class said:
Hi,
Like many of you you are not able to change the Audio settings in Service mode on your Galaxy S II after updating to 2.3.4+ or after updating to ICS. I for one need to re-enable WB AMR, which significantly increases your voice call quality. Some others like to change the setting to increase call volume outgoing or receiving.
Seems like Samsung removed this menu to prevent users from filing warranty claims after mucking with their audio settings.
Can someone please post their Service Mode APK that allows you to enter into the [5] Audio category?
If you were unaware, you can enter service mode on the Galaxy S II by dialing *#*#197328640#*#*
-rw-r--r-- 1 root root 118051 Mar 1 21:52 /system/app/serviceModeApp.apk
Click to expand...
Click to collapse
This one is taken from a leaked ICS ROM (XWLP3), but it may work.
Here is the link: https://docs.google.com/open?id=0B1MA3Lj0J2l4UDI5TjlWbGNScjYyVXRxeDhpeUYxUQ
http://www.contentsd.nl/apk/serviceModeApp.apk
Hmm, I was able to replace the application no problem but it won't run. The system /system/data/packages.xml contains information and signatures for the the file.
@Class said:
Hmm, I was able to replace the application no problem but it won't run. The system /system/data/packages.xml contains information and signatures for the the file.
Click to expand...
Click to collapse
Are you sure that the serviceModeApp.apk file is sitting in the system/app directory? If it is just saved to your phone and installed normally, it will appear in data/app directory. Use something like RootExplorer to move it to the system/app directory and reboot, and try it again.
Chris.
I did try to install it. I actually removed the references from Packages.xml without any luck.
When trying to install via ADB I get the following error:
INSTALL_FAILED_SHARED_USER_INCOMPATIBLE
@Class said:
I did try to install it. I actually removed the references from Packages.xml without any luck.
When trying to install via ADB I get the following error:
INSTALL_FAILED_SHARED_USER_INCOMPATIBLE
Click to expand...
Click to collapse
Try the process on this thread: http://forum.xda-developers.com/showthread.php?t=1219029
Chris.
That didn't work the shared user 1000 is not in the /data/system/packages.xml file.
@Class said:
That didn't work the shared user 1000 is not in the /data/system/packages.xml file.
Click to expand...
Click to collapse
did you get any joy with this? I'm looking to do the same - the call volume on headset is ridiculously low and is too frustrating.
Hey there,
I'm sorry if this question has been asked before but i'm looking for a way to increase my media volume via headphones. I've tried using free apps and what not but it's simply not loud enough! Could some kind person point me in the direction of how to do this please?
Things I've tired:
Rooting my phone.
Shouting at it.
Any tips ?
EDIT: Flashed the phone with this ROM and all was sorted: http://forum.xda-developers.com/showthread.php?t=2080065
Dannyuk5 said:
Hey there,
I'm sorry if this question has been asked before but i'm looking for a way to increase my media volume via headphones. I've tried using free apps and what not but it's simply not loud enough! Could some kind person point me in the direction of how to do this please?
Things I've tired:
Rooting my phone.
Shouting at it.
Any tips ?
EDIT: Flashed the phone with this ROM and all was sorted: http://forum.xda-developers.com/showthread.php?t=2080065
Click to expand...
Click to collapse
Theres one thing I know you can do,, You can flash this
http://forum.xda-developers.com/showthread.php?t=2249874 .
just follow ,, and then you can tweak it there,, EXPERIMENT
Follow the Beats Audio!!
1. Download files attached and copy them to your SD card.
2. Reboot to CWM and make backup!
3. Mount data, mount system, install beats_by_contradictor_V2.07_Alsa.zip update.
4. Reboot. First boot will take some time, not afraid - it is normal)
5. Install com.namakerorin.audiofxwidget.apk download it from Attachments..
6. Start audiofxwidget and choose "Dialog" option in Select mode section. Choose 40% transparency (later you can change this parametr as you want to).
7. Disable any other equalizers in your player.
8. Add audiofxwidget to your Android Home Screen and choose EQ and BASS you prefer.
NOTE!! Dont install com.namakerorin.audiofxwidget.apk On SD card.. it should be iinstall nside your internal memory
Enjoy!! :good::laugh::angel:
Hit Thanks If i helped you!!
Hello, this is my first post , so please tell me if my english is bad , or if you couldnt understand.
I want to share here my viper4android settings, I use these viper profiles, vocals are more clear , can notice the bas on earphones , crystal clear sound on your speakers . time to say goodbye to bad sound quality on our device GT-S5360
Code:
[CENTER]
Attention
1. I do not guarantee the results are 100% the same as you would expect , because everyone's music taste is different!
2. I can not guarantee if your device face bootloop, or sd card get damaged or defective hardware or a nuclear war even though
[/CENTER]
I have tested this tweaks on these ROMS
--Nougat ME CM7.2
--Hyperion 9
--Hyperion 8
--CM 11
--CMX 11 BETA
--Mango Me
--JellyBlast
with stock music player. If you try on other ROMS, report me! And do not forget to leave a review/comment!
Suggestions are welcome!
------------------------------!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Important!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!---------------------------------------
Don't try another EQ with it, only use ViperFX EQ!
if anyone wants to use these settings in the ROM,surely you can use it! But dont forget to mention me on credits!
INSTALLATION:
1. Turn on your smartphone first!
2. Please download required files from attachments
3. After the download gets completed , place the files on the SD card, dont place them on any folder.
4. Then extract and wait a while , after extracting make sure the directory / sdcard folder contained Viper4Android
5. Install Viper4android based on version of your android . then open the app. And install the driver, while opening the app it will ask you for access to superuser , select yes all the way! Reboot your phone when it asks to!
6. After the phone restarts , open the app viper4android , tap menu button , select "load preset "
7. Select which one you want .
ADD THIS CODE AFTER YOU TYPE DOMAIN DEV-HOST:
Code:
/B4im
[/CENTER]
[/CODE]
- Clarity = Bass balanced and sound clarity . ( Only for Headset )
- Master of Bass = natural bass sound balance and noise . (Can be a headset or speaker )
- Master of Headset = aloud to a headset with a noise that is balanced .
- Master of louds = aloud without reducing the quality of the Sound.
Thanks To: team Viper4Android and raisul2010.5396 for teach i, how to post in forum
zhypr4tam4 said:
hello , this is my first post , so please at advised if my english is very bad , could not understand, or make you feel dizzy .
I want to share viper4android settings . I still use to this day , his voice grew clearer , with the support of a booming bass voice on the headset , crystal clear sound on your speaker . time to say goodbye to the small and the sound quality is less clear on the GT - S5360 .
Attention
1. I do not guarantee the results are 100% the same as you would expect , because everyone is different tastes .
2. I can not guarantee if you have a smart phone bootloop , sd card is damaged or defective hardware or a nuclear war even though
I have a test on Rom Nougat ME CM7.2 , Hyperion 9 , Hyperion 8 , CM 11 , CMX 11 BETA , Mango Me , JellyBlast with based player. Another ROM please try , and do not forget to give me a comment.
Any ROM or Device Welcome.
------------------------------!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Important!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!---------------------------------------
Don't join another Eq, just this Eq always
if anyone wants to use these settings in the ROM homemade please , but do not forget you get it from anyone .
INSTALLATION:
1. The your smart phone first.
2. Please download first the material in the my comment
3. after the download is complete , place the files are on the SD card out of the folder .
4. then extract and wait a while , after extracting make sure the directory / sdcard folder contained Viper4Android
5. install Viper4android based version of OS your phone . then open the application . and install the driver dialog box appears , select the " yes " and give access to superuser , then " yes " when asked to reboot phone
6. after the phone restarts , open the app viper4android , push the menu button , select "load preset " preset select which one you want .
- Clarity = Bass balanced and sound clarity . ( Only for Haedset )
- Master of Bass = natural bass sound balance and noise . (Can be a headset or speaker )
- Master of Headset = aloud to a headset with a noise that is balanced .
- Master of louds = aloud without reducing the quality of the Sound.
Thanks To: team Viper4Android
Click to expand...
Click to collapse
Check your PM and for those who is seeking for link here it is>> http://d-h.st/B4im
raisul2010.5396 said:
Check your PM
Click to expand...
Click to collapse
ok, Thank you Friend, i hope you lead my, b'cause i'm newbie
zhypr4tam4 said:
ok, Thank you Friend, i hope you lead my, b'cause i'm newbie
Click to expand...
Click to collapse
I included your files link on 2nd comment Credit is all yours!
Hi there,
This is a copy paste of my post I made on reddit.
( https://www.reddit.com/r/Mi9T/comments/fcmplg/viper4android_profiles_for_mi_9t_k20_lets_share/ )
I've been messing around with V4A since yesterday and feel like we should share profiles and ressources, as I didn't find anything worth it for Mi 9t / k20 .
So here are my two cents and I hope you'll join in with yours.
First, ressources.
I downloaded an IRS pack (300+ samples) to use with the convoler option (put the files in /VIPER4ANDROID/KERNEL then load one within V4A). It changes everything. There are a lot of them on the net, just look for .irs files (impulse response sample). There's also an official link for this on the V4A xda lab page.
Here's the link to the one I used : https://forum.xda-developers.com/zenfone2/general/collection-convolver-samples-389-t3140299
Now, profiles (or is it presets ? ).
IMPORTANT EDIT : I use Ainur Narsil, the following profiles will probably sound a lot different if you don't ! I recommend that you do by the way (just be careful with the headset volume then, its max can kill a man !).
Here's my headphone profile, which I'm really happy with, I couldn't stop listening to music when I finished it. I used "basic" Iphone earphones while setting it up :
https://mega.nz/#!BnYiCayY!TbKgbA1Pn9gkth0S-Qu8j-KymR-Cn58R8iUQt1ddfdI
In case it wouldn't be saved within the .xml, it uses FRC - Sennheiser HD 595 (50% Correction).irs at 0% cross channel (included in archive).
Here's my speaker profile. I was satisfied with it yesterday but not that much now that I tasted the one above. I probably can't do as good with the phone speaker as with headphones but still. It looses in gain and has to be even further lowered because it otherwise saturates (distords ? - not sure about my english here). So there's definitly room for improvement here but still :
https://mega.nz/#!YvICnCwT!wMy5A1vrQ2UmHUDiA_oxqezvX7xX2n3z6b5o0AP 5aCs
This one uses Clear Bass +3 & ClearAudio+ 70.irs at 100% (included in the archive as well).
(Re)Edit : Here's my new speaker profile, I feel like it's the best I can do, and I'm quite happy with it, let's hope I still am tomorrow ! It uses Clear Bass +.irs at 16% cross channel (included in the archive of course). Enjoy !
https://mega.nz/#!pvoRQBRb!B4ew2eK1HZW49TJ9kQoZ_7v6o-2hWMi2rhBktCj2e14
That's it, I hope it will help and start an exchange thread.Please share yours if you feel like it... especially the speaker ones !
Cheers
Excellent, mate! Thanks for sharing!
Gonna test them asap
Good morning.
Any tutorial or video to install V4A and driver?
How do I install the zip file of your profile?
Thank you.
wahuka said:
Good morning.
Any tutorial or video to install V4A and driver?
How do I install the zip file of your profile?
Thank you.
Click to expand...
Click to collapse
Hi there, here is the guide I followed. Just as they say it's kind of a hit or miss, try again and if it doesn't work, try harder !
A note about it though, in my experience it seems to work better in the long term when one keeps AML activated in the end, so try to do that first, and again if doesn't work at first, insist for a bit, just in case.
*ah, sadly I'm a new user so I can't post links yet. The guide is on the website "the custom droid dot com" all attached , use the search engine on it and look for : "How to Install ViPER4Android on Android 10 Q (Fully Working)", you'll find it .
Now regarding presets archives, once everything is installed and working, unpack the archive in /Viper4Android , just use a file manager, the folder is not hidden or anything. It will paste kernel into kernel and presets into presets. Then, in V4A you just log press the speaker (or whatever) icon on the bottom and release, it will prompt the menu to load your presets.
Just so you get everything, the kernel folder contains those .irs files for the convolver option. The presets folder contains the presets files (right ? ) with all the tweaks settings.
I hope it helps.
Cheers !
wahuka said:
Good morning.
Any tutorial or video to install V4A and driver?
How do I install the zip file of your profile?
Thank you.
Click to expand...
Click to collapse
This works also for Mi 9T:
https://forum.xda-developers.com/k20-pro/themes/guide-viperfx-miui-11-android-10-t3994621
Thank you both.
I'm going to follow the tutorials to try.
I just installed Viper 2.7.1.0.apk, there's no need for flashing...
Sent from my Redmi K20 using XDA Labs
Actually, using combo V4A + Equilizer:
https://play.google.com/store/apps/details?id=music.basss.booster.effect.equalizer
In the Equilizer app using only equilizers, turned down Boosts, Virtualization and so (using V4A instead)
Hi, I have an issue with presets.
I have extracted the 2 zip but when I long press in Viper4android nothing appears.
What should I do ?
Anakill said:
Hi, I have an issue with presets.
I have extracted the 2 zip but when I long press in Viper4android nothing appears.
What should I do ?
Click to expand...
Click to collapse
There are three different actions, on short press, long press and mid-long press (you need that one). So lttle experiment with your finger
zgfg said:
There are three different actions, on short press, long press and mid-long press (you need that one). So lttle experiment with your finger
Click to expand...
Click to collapse
Actually, I've found the mid-long press but it only shows new preset
Anakill said:
Actually, I've found the mid-long press but it only shows new preset
Click to expand...
Click to collapse
It doesn't find Preset file
Hello my friend, thanks for sharing ...
I have a request, will there be sharing for bluetooth headset?
The model I use; Haylou GT1
zgfg said:
It doesn't find Preset file
Click to expand...
Click to collapse
Yes it doesn't.
PotentieL said:
Now regarding presets archives, once everything is installed and working, unpack the archive in /Viper4Android , just use a file manager, the folder is not hidden or anything. It will paste kernel into kernel and presets into presets...
Click to expand...
Click to collapse
Anakill said:
Yes it doesn't.
Click to expand...
Click to collapse
With Viper4AndroidFX v2.7.1.6, its settings apparently moved to (as on the screenshot):
Internal memory
/Android/data/com.pittvandewitt.viperfx/files
Anakill said:
Hi, I have an issue with presets.
I have extracted the 2 zip but when I long press in Viper4android nothing appears.
What should I do ?
Click to expand...
Click to collapse
Load The pre-configs with doble tap in the (¿Source of sound?) (Headphone, Speaker, Bt, etc)
Hi! Have any a good profile for BT headphones? (Air 2 se) I have a good volumen in poweramp but in youtube the max volumen its too low, thanks!
Enviado desde mi Mi 9T mediante Tapatalk
Hi all,
I would like to share my preset for the speaker of xiaomi 9T