Related
Hi all ...
I have a htc hero for a week now and i have serval question . I hope they wont be the stupid questions and hope u answer them all and sorry for my bad english
1. I installed MCR 3.0 , Is my Phone rooted or i must do extra action to root it ?
2. How Can i Install APPs On my SD card ? Please answer it from the begging to end ( Thansk )
3. I can download apps from Market how can i get Apps by my PC and in APK format and where?
4. My wifi connection is to slow and it didint connect good . its only connect when i reset my Router . how can i fix this problem ?
Thanks for your answers
Hey
Yea your phone is rooted otherwise you would have not been able to install a custom ROM.
I'm not going to describe the APPS2SD method just search it on the forum, there is a tutorial somewhere.
If you download a file manager (Astro/Linda) you can add .apk files onto your SD card and install it through that. There is no specific place for .apk files you just have to search about, your best bet is probably using torrent downloads.
That isgenerally a problem with your internet speed/connection so there is very little you can do unless you are willing to upgrade it. I don't think you can improve the phones WIFI status either :/
Hope I helped
As above. Apps2sd requires you to have partitioned before installing modaco 3.0 though. I didn't bother but if you want it, wipe and partition. Easily done with AMON RAs recovery image
Installing apks is simple with a file manager. I use Astro. Put the apk on to your sd card and navigate to it with astro and choose package manager to install, nothing simpler. It's just getting the apks .
Sometimes it can take a while for me to establish a connection with my router. Other than that, see this thread : http://forum.xda-developers.com/showthread.php?t=548807&page=2
I ve got this weird problem. While on a call using the headset the volume is very low. But the music volume is fine and loud.
I tried entering service mode *#*#197328640#*#*
there when I select option 5 AUDIO nothing happens and all other options work.
Currently I am on KPN 2.3.3 FLA.SH 2.3.
So please help me fix this problem.
PS- Volume +, Equilizer, DSP manager etc do not work.
I have tried Google as well as searching the forum for related posts. but couldn't find any help.
I d very grateful if someone could help me.
Thank you
Click to expand...
Click to collapse
So after waiting for couple of days and no reply from any member and my constant battle with the phone gave me some answers...
I flashed XXKPH and then tried to goto Service Mode and then Audio ... VOILA!!! It works...
So for those who are in KPN or KPN based firmware eg. fla.sh 2.2 ..Good news
You can now hack the in-call volume to get it louder and use it outdoors ..
INSTRUCTIONS:
Requirements:
1. Rooted Phone.
2. RootExplorer or some other explorer with root permissions. can also use adb if u know it .
1. copy the attached file using root exporer to /system/app
2. Edit permissions to rw-r-r and REBOOT
3. Open Dialer and type *#*#197328640#*#*
4. Navigate as
[5] Audio >> [2] Headset >> [2]RX Value >> [1] Rx Codec/Volume >> [1] Rx Codec Gain:
5. Select it and input value ffff
the result will be 12db
P.S.
1. Dont forget to backup your original settings as well as the original servicemode.apk, just in case
2. If you can already access the Audio settings then skip the copying part just go ahead with the value editing.
CHEERS
If i helped you then Press thankx...
BTW: I am disappointed by the community support for Galaxy Ace, because before this i had Galaxy5 and the thread there was superb. Ask anything and you will get n answer no matter what, atleast u would know that noone can help you rather then just view the post and pass by. I m a medical student and do not know much about android , just trying to play my part.. Thank you
I'm using cyanogenMod7.2 RC1 BY VO-1 MIRACLE and I notice that the in-call volume is too low. I've notice in other roms.
Can I use your solution with this rom?
Thanks
tiagobouca said:
I'm using cyanogenMod7.2 RC1 BY VO-1 MIRACLE and I notice that the in-call volume is too low. I've notice in other roms.
Can I use your solution with this rom?
Thanks
Click to expand...
Click to collapse
no because those codes will work on stock roms only
just clean ur speaker.
simply get service manual or find video on youtube and do like it's said there. but be very careful.
my HTC HD2 keep flashing on HTC green logo here's the thing i did before this happened:
1) after having hanged most of the time because of having full internal memory (holding power button "HARD RESET")
2) holding power button and enter into the 1-10 options i dont know what you guys call them but there is a 1-10 option and what i did was do the factory reset and ask me to wipe all the files and hit ok, and some running deleting and i dont know what to call them then it reboot then suddenly it just keep restarting on HTC green logo.
i actually go to the other shop that they said they can repair this kind of problem and i watch them on their computer they just keep searching and posting on the other site asking for help so i said to the technician, we're wasting both our time waiting for your help in the other sites so ask them can you give me back my phone pls. and here i am found the XDA forum so decided to register and look for your genius help i know you guys are pro when it comes to this kind of problem can someone help me pls this phone is all i got, got no money to buy another phone this is like a treasure to me since i dont have a job,
PLS PLS PLS help with this some say i need to reflash? i dont know how or what should i do.
Thanks in advance guys.
any comments is highly appreciated!
info
additional info
using android 2.3
T-Mobile
i read some forums that should i back up first before doing the factory reset using the 1-10 option i somehow factory reset without having a back up of it i thought its just ordinary factory reset
someone help me pls
i will give you any information that you needed in my HTC as long as you help me how to do it im totally noob.
I think you have a nand rom if so tr doing a clean install.
1. Flash a stock WM6.5 rom
2. Flash magldr (which i think u have) or BlackCLK (I personally prefer this for android on NAND and if not dualbooting)
3. Find a cool rom in the NAND section, Flash it and enjoy.
Let me know if you need more info.
reflash with stock rom t-mbole,
folow of procedure how to flash it,,.
Suhaib10 said:
I think you have a nand rom if so tr doing a clean install.
1. Flash a stock WM6.5 rom
2. Flash magldr (which i think u have) or BlackCLK (I personally prefer this for android on NAND and if not dualbooting)
3. Find a cool rom in the NAND section, Flash it and enjoy.
Let me know if you need more info.
Click to expand...
Click to collapse
THanks for your very helpful reply sorry for being noob what is stock WM6.5? magldr or BlackCLK? cool rom? I think you have a nand rom if so tr doing a clean install? what is TR? help me pls i need a step by step guide? i really appreciate your reply this means to me thanks.
Before you start READ THIS. The default os the HD2 comes with is known as Windows mobile 6.5. The developers at XDA have managed to make android work on this device using special secondary bootloaders which need to be flashed(installed) on the HD2.
There are two of them, one is MAGLDR made by cotulla which is the one you have i think (the numbers with options when it starts) the other is CLK which is open source. These bootloaders allow you to boot an Android rom (the os).
Before we start download and install Windows mobile device center on your PC. Once done follow the steps.
Step1 - WINDOWS MOBILE
a. First we are going to put the HD2's default os WM6.5 (THIS WILL ERASE EVERYTHING) Download this
b. Turn off your phone, hold the volume down and power button until it shows a screen with three colors (Bootloader).
c. Connect your phone to the PC (Where it says SERIAL on your phone it should change to USB) and run the file you downloaded in "a" and follow the instructions it says.
d. The phone will reboot after the process and boot the os.
Step 2 - secondary Bootloaders
Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on.
This where you have 2 options one is MAGLDR and the other is CLK (I prefer BlackCLK since you can easily congfiure it to modify the sizes of system and data without a PC). If you'd like magldr try this video it should help
BlackCLK - Download
a. Format an SD card and copy the LEOIMG.nbh from the zip to SD.
b. Put it in the HD2 and boot into the tri colored screen.
c. It should say something to flash it, follow what it says.
d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select
Since you have t-mobile you have enough storage space unlike european hd2
so we'll skip dataonEXT (basically moves data to a secondary partition on your sd) if you want it let me know.
INSTALLING android
a. Find a nice rom (os) in the android nand section since you were on 2.3 you can continue with it or try 4.2 (jellybean) rom Good fast roms are pixelfreaks, nexushd2(from tytung) or most of the older 2.3 roms.
b.1 Once you find one you like download it and copy it (the .zip file) to your sd and put it in your hd2.
b.2. Each rom has size requirements for system and cache (it says it on the thread for the rom).
c. GO to settings ---> resize partition set system and cache according to required by the rom save/apply it. go back format nand. then reboot
c. go to recovery, once loaded click install and choose your rom and follow the instructions it says.
d. reboot and you should be good to go.
Suhaib10 said:
Before you start READ THIS. The default os the HD2 comes with is known as Windows mobile 6.5. The developers at XDA have managed to make android work on this device using special secondary bootloaders which need to be flashed(installed) on the HD2.
There are two of them, one is MAGLDR made by cotulla which is the one you have i think (the numbers with options when it starts) the other is CLK which is open source. These bootloaders allow you to boot an Android rom (the os).
Before we start download and install Windows mobile device center on your PC. Once done follow the steps.
Step1 - WINDOWS MOBILE
a. First we are going to put the HD2's default os WM6.5 (THIS WILL ERASE EVERYTHING) Download this
b. Turn off your phone, hold the volume down and power button until it shows a screen with three colors (Bootloader).
c. Connect your phone to the PC (Where it says SERIAL on your phone it should change to USB) and run the file you downloaded in "a" and follow the instructions it says.
d. The phone will reboot after the process and boot the os.
Step 2 - secondary Bootloaders
Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on.
This where you have 2 options one is MAGLDR and the other is CLK (I prefer BlackCLK since you can easily congfiure it to modify the sizes of system and data without a PC). If you'd like magldr try this video it should help
BlackCLK - Download
a. Format an SD card and copy the LEOIMG.nbh from the zip to SD.
b. Put it in the HD2 and boot into the tri colored screen.
c. It should say something to flash it, follow what it says.
d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select
Since you have t-mobile you have enough storage space unlike european hd2
so we'll skip dataonEXT (basically moves data to a secondary partition on your sd) if you want it let me know.
INSTALLING android
a. Find a nice rom (os) in the android nand section since you were on 2.3 you can continue with it or try 4.2 (jellybean) rom Good fast roms are pixelfreaks, nexushd2(from tytung) or most of the older 2.3 roms.
b.1 Once you find one you like download it and copy it (the .zip file) to your sd and put it in your hd2.
b.2. Each rom has size requirements for system and cache (it says it on the thread for the rom).
c. GO to settings ---> resize partition set system and cache according to required by the rom save/apply it. go back format nand. then reboot
c. go to recovery, once loaded click install and choose your rom and follow the instructions it says.
d. reboot and you should be good to go.
Click to expand...
Click to collapse
Thanks for your reply man i really really appreciate this, im gonna try this one my wife want to try the jellybean since its new :laugh: is jellybean a fast rom? anyway how do i know if the file is in correct hash or not corrupted? i read some forums some files are corrupted? what do you recommend me i would like a fast rom instead? does it need a 100% battery?
(Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on) *what should i do if not 2.08 HSPL?
what should i do to know the verison of my HSPL?
i think i should follow your instruction its because its easy to follow rather than the one you hyperlink in READ THIS, is it ok?
too many questions sorry i just wanted to be sure, thanks for your wonderful help god bless!
lloydchristian said:
Thanks for your reply man i really really appreciate this, im gonna try this one my wife want to try the jellybean since its new :laugh: is jellybean a fast rom? anyway how do i know if the file is in correct hash or not corrupted? i read some forums some files are corrupted? what do you recommend me i would like a fast rom instead? does it need a 100% battery?
(Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on) *what should i do if not 2.08 HSPL?
what should i do to know the verison of my HSPL?
i think i should follow your instruction its because its easy to follow rather than the one you hyperlink in READ THIS, is it ok?
too many questions sorry i just wanted to be sure, thanks for your wonderful help god bless!
Click to expand...
Click to collapse
If you do not have HSPL2.08 (most likely you'll have it since you already had MAGLDR) you should Flash HSPL 2.08
Well not quite sure which rom is the best but, i have tried Pixel freaks AOKP and Slim ROM, they both are 4.2.2 and were pretty good but you'll have to find one which suits you.
Suhaib10 said:
If you do not have HSPL2.08 (most likely you'll have it since you already had MAGLDR) you should Flash HSPL 2.08
Well not quite sure which rom is the best but, i have tried Pixel freaks AOKP and Slim ROM, they both are 4.2.2 and were pretty good but you'll have to find one which suits you.
Click to expand...
Click to collapse
sorry again i just want to be sure i dont want to mess my cellphone, i think i should follow your instructions its because its easy to follow rather than the one you hyperlink in READ THIS, is it ok?
is there a way to view what my current HSPL? i tried this one holding power button and volume down button this is how it shows
PB81120 HX-B3
SPL-2.08. HSPL 8G XE
0x05
CotullaHSPL 0x40
so should i start now the process that you told me?
if i do this does it delete the amagldr?
and also d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select? (if i reach it'll say something cannot be found and go to menu? it means i did something bad? or its normal to reach on that scenario?)
The READ THIS part was for Basic Info.
Yeah your HSPL stuff seems fine
And yes it will remove MAGLDR and in the end youll eventually be using clk (latest one which i put the link for is CLK 1.5.x.) I dont think it'll matter that much since you aren't dual booting (WP7 and android) and have android on NAND(The phone itself). If you want to use MAGLDR over CLK follow the video and Not the CLK part
should i start now?
so should i start now the process that you told me?
i read the some info in clk does it auto configure by default?
"Changed some options under SETTINGS.
Added option to use inbuilt off-mode charging under SETTINGS/SET DEFAULT OFF-MODE CHARGING. From that menu you can select it (option USE INBUILT OFF-MODE CHARGING) and try it out.
If using inbuilt off-mode charging the device wakes up if you press POWER [button].
This is an experimental feature! Only tested with original battery and charger.
High Voltage (as measurement) is set to 4.2 V. Use at your own risk! Otherwise stick to the default way of charging (option USE RECOVERY'S OFF-MODE CHARGING).
Usb detection function changed (option under SETTINGS/ENABLE USB DETECTION). "USB" mark at the bottom of the screen if device connected to pc is replaced by turning led on/off if connected/disconnected.
Added some code as an experiment for a potential off-mode alarm application.
More info in this thread.
Warning : I didn't know java or how to use eclipse and make an android app. Seriously, I still don't. But after some days I managed to write this application mostly because I wanted to know if this idea was possible. So consider it as an example. Any criticism accepted. I just hope that someone may find it useful and make the best out of it."
i dont want to take the risk can you help me configure it to "ALL" default? i know you 're the one who can help me.
<in your previous post what do you mean by this?>
and also d. Once done reboot. it'll say something cannot be found and go to a menu. "if your reach it YAY". Volume keys to move and green key to select? (if i reach it'll say something cannot be found and go to menu? it means i did something bad? or its normal to reach on that scenario?)
thanks man each time you reply you educate me.
should i start now?
Suhaib10 said:
Before you start READ THIS. The default os the HD2 comes with is known as Windows mobile 6.5. The developers at XDA have managed to make android work on this device using special secondary bootloaders which need to be flashed(installed) on the HD2.
There are two of them, one is MAGLDR made by cotulla which is the one you have i think (the numbers with options when it starts) the other is CLK which is open source. These bootloaders allow you to boot an Android rom (the os).
Before we start download and install Windows mobile device center on your PC. Once done follow the steps.
Step1 - WINDOWS MOBILE
a. First we are going to put the HD2's default os WM6.5 (THIS WILL ERASE EVERYTHING) Download this
b. Turn off your phone, hold the volume down and power button until it shows a screen with three colors (Bootloader).
c. Connect your phone to the PC (Where it says SERIAL on your phone it should change to USB) and run the file you downloaded in "a" and follow the instructions it says.
d. The phone will reboot after the process and boot the os.
Step 2 - secondary Bootloaders
Just to be sure before you start this go in to the tricolored screen It should say 2.08HSPL somewhere if it doesn't DO NOT continue. If it does continue on.
This where you have 2 options one is MAGLDR and the other is CLK (I prefer BlackCLK since you can easily congfiure it to modify the sizes of system and data without a PC). If you'd like magldr try this video it should help
BlackCLK - Download
a. Format an SD card and copy the LEOIMG.nbh from the zip to SD.
b. Put it in the HD2 and boot into the tri colored screen.
c. It should say something to flash it, follow what it says.
d. Once done reboot. it'll say something cannot be found and go to a menu. if your reach it YAY. Volume keys to move and green key to select
Since you have t-mobile you have enough storage space unlike european hd2
so we'll skip dataonEXT (basically moves data to a secondary partition on your sd) if you want it let me know.
INSTALLING android
a. Find a nice rom (os) in the android nand section since you were on 2.3 you can continue with it or try 4.2 (jellybean) rom Good fast roms are pixelfreaks, nexushd2(from tytung) or most of the older 2.3 roms.
b.1 Once you find one you like download it and copy it (the .zip file) to your sd and put it in your hd2.
b.2. Each rom has size requirements for system and cache (it says it on the thread for the rom).
c. GO to settings ---> resize partition set system and cache according to required by the rom save/apply it. go back format nand. then reboot
c. go to recovery, once loaded click install and choose your rom and follow the instructions it says.
d. reboot and you should be good to go.
Click to expand...
Click to collapse
i just want to ask which folder should i put the LEOIMG.nbh?
what format of sd card? fat32?
what version of clk that i shall download? stable, legacy or experimental?
which one should i download?
Quote:
cLK (source code)
Experimental
Stable
Legacy
Quote:
ppp wrappers (source code)
0.8b4
0.8b5
where do i download the new clk version?
thanks man
The default CLK settings are fine as they are, the only things you will need to change will be the the partition sizes (system and cache depending on the rom).
Put LEOIMG.nbh on the root not in any folders
Sdcard should be formatted FAT32
CLK Experimental (Although its pretty stable). The latest version is the one i have put the BlackCLK download link for.
Suhaib10 said:
The default CLK settings are fine as they are, the only things you will need to change will be the the partition sizes (system and cache depending on the rom).
Put LEOIMG.nbh on the root not in any folders
Sdcard should be formatted FAT32
CLK Experimental (Although its pretty stable). The latest version is the one i have put the BlackCLK download link for.
Click to expand...
Click to collapse
you mean just copy the LEOIMG.nbh in sd ok, just in the root of the sd what formating tools?
why do i need to change the partition size i read in forum the minimum is 220mb? is ok?
thank you bro
Just regular format the sd through windows fat32.
The Partition size thing is for the PHONE not the SD. Each rom requires different SYSTEM sizes, like for example even though the minimum is 220mb you might want to add more in case you plan on adding stuff to system like GAPPS (Google apps) or any mods.
The reason for this is because even though your phone has 1gb Storage internal you will need to tell it how much each part of it should be used by system, cache (some is used by the recovery) and the remaining will be DATA( where your installed apps go).
When you first put CLK it will have some other system size (150mb i think) set so you'll need to change it.
Sorry forgot this part in the main guide. But if you want to increase you storage you will need to partition your sd card in the recovery before you flash your rom. First partiton -Fat32 and second as partition as EXT4, the size of your EXT4 will be added to your phone and will be counted as internal storage and then while flashing the rom choose with DataonExt. If you dont really care about this just ignore this.
P.S. Ohh in the rom installation IF it asks for PPP or RMNET choose PPP, RMNET is only for MAGLDR.
Suhaib10 said:
Just regular format the sd through windows fat32.
The Partition size thing is for the PHONE not the SD. Each rom requires different SYSTEM sizes, like for example even though the minimum is 220mb you might want to add more in case you plan on adding stuff to system like GAPPS (Google apps) or any mods.
The reason for this is because even though your phone has 1gb Storage internal you will need to tell it how much each part of it should be used by system, cache (some is used by the recovery) and the remaining will be DATA( where your installed apps go).
When you first put CLK it will have some other system size (150mb i think) set so you'll need to change it.
Sorry forgot this part in the main guide. But if you want to increase you storage you will need to partition your sd card in the recovery before you flash your rom. First partiton -Fat32 and second as partition as EXT4, the size of your EXT4 will be added to your phone and will be counted as internal storage and then while flashing the rom choose with DataonExt. If you dont really care about this just ignore this.
P.S. Ohh in the rom installation IF it asks for PPP or RMNET choose PPP, RMNET is only for MAGLDR.
Click to expand...
Click to collapse
oh ok thanks for this wonderful info.
you mean it is rooted automatically?
is it ok if im only using 2gb sd?
and what if i want to repartition the sd card anytime?
All hd2 roms are rooted.
2GB for what, DataonExt?(for data one ext to work youll need to have a second ext partition)
well its best to do it before installation and choose that option while installing the rom, if not you can do it after but it sometimes doesnt work with some roms. You can partition the sdcard later ( so with 2 gb youll want to make 1 gb ext and the remaining 1Gb will be your ext or whaterver is left), but then youl have to flash a dataonext zip (the v2).
But its best to do this before hand althought the best option for tmobile hd2's is just nand (without dataonext,, data onext is usually for EU hd2's since they have smaller storages.), also to use dataonext it needs a fast sdcard otherwise it can slightly slow down the rom(cause the apps will be running of the sd).
Suhaib10 said:
All hd2 roms are rooted.
2GB for what, DataonExt?(for data one ext to work youll need to have a second ext partition)
well its best to do it before installation and choose that option while installing the rom, if not you can do it after but it sometimes doesnt work with some roms. You can partition the sdcard later ( so with 2 gb youll want to make 1 gb ext and the remaining 1Gb will be your ext or whaterver is left), but then youl have to flash a dataonext zip (the v2).
But its best to do this before hand althought the best option for tmobile hd2's is just nand (without dataonext,, data onext is usually for EU hd2's since they have smaller storages.), also to use dataonext it needs a fast sdcard otherwise it can slightly slow down the rom(cause the apps will be running of the sd).
Click to expand...
Click to collapse
my phone has only 576mb (t-mobile) do i have to partition my phone also?
sd card 2 gb.
anyway if i use the partition right after i install the rom the 1 gb isa fat32 and the other 1 gb for ext? so my question is the rom will create the ext system file? because windows doesnt have ext.
so do i have to use this partition thing? its kinda complicated like y ou said im using t-mobile can i skip this partition? or it is necessary to install a rom?
additional info for my phone: sim locked, not yet unlock
can you also help me to sim unlock?
thanks man! God bless!
576mb is RAM which both T-mboile and EU hd2's have, the only difference is T-mobile has 1GB ROM/NAND (the storage) while EU has 512mb.
Just wondering you phone does say T-mobile and has a green call key and red end key right???
First off the phone partition thing is different compared to sd. For the phone look at the system size and cache size required for the rom and resize those in CLK.
Second you can skip the SD partitioning its not a highly required especially for t-mobile I just added that as an extra.
Third Try experimenting you'll never get anywhere if you dont try .
And i have no idea about simlock try googling it
Suhaib10 said:
576mb is RAM which both T-mboile and EU hd2's have, the only difference is T-mobile has 1GB ROM/NAND (the storage) while EU has 512mb.
Just wondering you phone does say T-mobile and has a green call key and red end key right???
First off the phone partition thing is different compared to sd. For the phone look at the system size and cache size required for the rom and resize those in CLK.
Second you can skip the SD partitioning its not a highly required especially for t-mobile I just added that as an extra.
Third Try experimenting you'll never get anywhere if you dont try .
And i have no idea about simlock try googling it
Click to expand...
Click to collapse
my phone it has a green call button to the left and red button to the right but when you turn on the HTC the loading screens are color pink stick together, then it goes to the something says 123456 go go go, then go to HTC queitly brilliant, htc green logo, (in my case it hangs in green logo) lets continue color pink Beats logo, then htc green logo then the regular home screen.
my phone has a t-mobile in front of the face plate near the small speaker when you make a call.
can i skip the dataonext? its kinda complicated
and one more thing after i install the stock rom will the HSPL 2.08 will be deleted?
Thank you very much! God bless!
ps. my internal storage is 500+ only not 1 gb, i dont know if its just locked but im pretty sure my internal memory 569 to be exact i dont know why.
Thanks. God bless!
Hello, this is my first post , so please tell me if my english is bad , or if you couldnt understand.
I want to share here my viper4android settings, I use these viper profiles, vocals are more clear , can notice the bas on earphones , crystal clear sound on your speakers . time to say goodbye to bad sound quality on our device GT-S5360
Code:
[CENTER]
Attention
1. I do not guarantee the results are 100% the same as you would expect , because everyone's music taste is different!
2. I can not guarantee if your device face bootloop, or sd card get damaged or defective hardware or a nuclear war even though
[/CENTER]
I have tested this tweaks on these ROMS
--Nougat ME CM7.2
--Hyperion 9
--Hyperion 8
--CM 11
--CMX 11 BETA
--Mango Me
--JellyBlast
with stock music player. If you try on other ROMS, report me! And do not forget to leave a review/comment!
Suggestions are welcome!
------------------------------!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Important!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!---------------------------------------
Don't try another EQ with it, only use ViperFX EQ!
if anyone wants to use these settings in the ROM,surely you can use it! But dont forget to mention me on credits!
INSTALLATION:
1. Turn on your smartphone first!
2. Please download required files from attachments
3. After the download gets completed , place the files on the SD card, dont place them on any folder.
4. Then extract and wait a while , after extracting make sure the directory / sdcard folder contained Viper4Android
5. Install Viper4android based on version of your android . then open the app. And install the driver, while opening the app it will ask you for access to superuser , select yes all the way! Reboot your phone when it asks to!
6. After the phone restarts , open the app viper4android , tap menu button , select "load preset "
7. Select which one you want .
ADD THIS CODE AFTER YOU TYPE DOMAIN DEV-HOST:
Code:
/B4im
[/CENTER]
[/CODE]
- Clarity = Bass balanced and sound clarity . ( Only for Headset )
- Master of Bass = natural bass sound balance and noise . (Can be a headset or speaker )
- Master of Headset = aloud to a headset with a noise that is balanced .
- Master of louds = aloud without reducing the quality of the Sound.
Thanks To: team Viper4Android and raisul2010.5396 for teach i, how to post in forum
zhypr4tam4 said:
hello , this is my first post , so please at advised if my english is very bad , could not understand, or make you feel dizzy .
I want to share viper4android settings . I still use to this day , his voice grew clearer , with the support of a booming bass voice on the headset , crystal clear sound on your speaker . time to say goodbye to the small and the sound quality is less clear on the GT - S5360 .
Attention
1. I do not guarantee the results are 100% the same as you would expect , because everyone is different tastes .
2. I can not guarantee if you have a smart phone bootloop , sd card is damaged or defective hardware or a nuclear war even though
I have a test on Rom Nougat ME CM7.2 , Hyperion 9 , Hyperion 8 , CM 11 , CMX 11 BETA , Mango Me , JellyBlast with based player. Another ROM please try , and do not forget to give me a comment.
Any ROM or Device Welcome.
------------------------------!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Important!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!---------------------------------------
Don't join another Eq, just this Eq always
if anyone wants to use these settings in the ROM homemade please , but do not forget you get it from anyone .
INSTALLATION:
1. The your smart phone first.
2. Please download first the material in the my comment
3. after the download is complete , place the files are on the SD card out of the folder .
4. then extract and wait a while , after extracting make sure the directory / sdcard folder contained Viper4Android
5. install Viper4android based version of OS your phone . then open the application . and install the driver dialog box appears , select the " yes " and give access to superuser , then " yes " when asked to reboot phone
6. after the phone restarts , open the app viper4android , push the menu button , select "load preset " preset select which one you want .
- Clarity = Bass balanced and sound clarity . ( Only for Haedset )
- Master of Bass = natural bass sound balance and noise . (Can be a headset or speaker )
- Master of Headset = aloud to a headset with a noise that is balanced .
- Master of louds = aloud without reducing the quality of the Sound.
Thanks To: team Viper4Android
Click to expand...
Click to collapse
Check your PM and for those who is seeking for link here it is>> http://d-h.st/B4im
raisul2010.5396 said:
Check your PM
Click to expand...
Click to collapse
ok, Thank you Friend, i hope you lead my, b'cause i'm newbie
zhypr4tam4 said:
ok, Thank you Friend, i hope you lead my, b'cause i'm newbie
Click to expand...
Click to collapse
I included your files link on 2nd comment Credit is all yours!
Hi there,
This is a copy paste of my post I made on reddit.
( https://www.reddit.com/r/Mi9T/comments/fcmplg/viper4android_profiles_for_mi_9t_k20_lets_share/ )
I've been messing around with V4A since yesterday and feel like we should share profiles and ressources, as I didn't find anything worth it for Mi 9t / k20 .
So here are my two cents and I hope you'll join in with yours.
First, ressources.
I downloaded an IRS pack (300+ samples) to use with the convoler option (put the files in /VIPER4ANDROID/KERNEL then load one within V4A). It changes everything. There are a lot of them on the net, just look for .irs files (impulse response sample). There's also an official link for this on the V4A xda lab page.
Here's the link to the one I used : https://forum.xda-developers.com/zenfone2/general/collection-convolver-samples-389-t3140299
Now, profiles (or is it presets ? ).
IMPORTANT EDIT : I use Ainur Narsil, the following profiles will probably sound a lot different if you don't ! I recommend that you do by the way (just be careful with the headset volume then, its max can kill a man !).
Here's my headphone profile, which I'm really happy with, I couldn't stop listening to music when I finished it. I used "basic" Iphone earphones while setting it up :
https://mega.nz/#!BnYiCayY!TbKgbA1Pn9gkth0S-Qu8j-KymR-Cn58R8iUQt1ddfdI
In case it wouldn't be saved within the .xml, it uses FRC - Sennheiser HD 595 (50% Correction).irs at 0% cross channel (included in archive).
Here's my speaker profile. I was satisfied with it yesterday but not that much now that I tasted the one above. I probably can't do as good with the phone speaker as with headphones but still. It looses in gain and has to be even further lowered because it otherwise saturates (distords ? - not sure about my english here). So there's definitly room for improvement here but still :
https://mega.nz/#!YvICnCwT!wMy5A1vrQ2UmHUDiA_oxqezvX7xX2n3z6b5o0AP 5aCs
This one uses Clear Bass +3 & ClearAudio+ 70.irs at 100% (included in the archive as well).
(Re)Edit : Here's my new speaker profile, I feel like it's the best I can do, and I'm quite happy with it, let's hope I still am tomorrow ! It uses Clear Bass +.irs at 16% cross channel (included in the archive of course). Enjoy !
https://mega.nz/#!pvoRQBRb!B4ew2eK1HZW49TJ9kQoZ_7v6o-2hWMi2rhBktCj2e14
That's it, I hope it will help and start an exchange thread.Please share yours if you feel like it... especially the speaker ones !
Cheers
Excellent, mate! Thanks for sharing!
Gonna test them asap
Good morning.
Any tutorial or video to install V4A and driver?
How do I install the zip file of your profile?
Thank you.
wahuka said:
Good morning.
Any tutorial or video to install V4A and driver?
How do I install the zip file of your profile?
Thank you.
Click to expand...
Click to collapse
Hi there, here is the guide I followed. Just as they say it's kind of a hit or miss, try again and if it doesn't work, try harder !
A note about it though, in my experience it seems to work better in the long term when one keeps AML activated in the end, so try to do that first, and again if doesn't work at first, insist for a bit, just in case.
*ah, sadly I'm a new user so I can't post links yet. The guide is on the website "the custom droid dot com" all attached , use the search engine on it and look for : "How to Install ViPER4Android on Android 10 Q (Fully Working)", you'll find it .
Now regarding presets archives, once everything is installed and working, unpack the archive in /Viper4Android , just use a file manager, the folder is not hidden or anything. It will paste kernel into kernel and presets into presets. Then, in V4A you just log press the speaker (or whatever) icon on the bottom and release, it will prompt the menu to load your presets.
Just so you get everything, the kernel folder contains those .irs files for the convolver option. The presets folder contains the presets files (right ? ) with all the tweaks settings.
I hope it helps.
Cheers !
wahuka said:
Good morning.
Any tutorial or video to install V4A and driver?
How do I install the zip file of your profile?
Thank you.
Click to expand...
Click to collapse
This works also for Mi 9T:
https://forum.xda-developers.com/k20-pro/themes/guide-viperfx-miui-11-android-10-t3994621
Thank you both.
I'm going to follow the tutorials to try.
I just installed Viper 2.7.1.0.apk, there's no need for flashing...
Sent from my Redmi K20 using XDA Labs
Actually, using combo V4A + Equilizer:
https://play.google.com/store/apps/details?id=music.basss.booster.effect.equalizer
In the Equilizer app using only equilizers, turned down Boosts, Virtualization and so (using V4A instead)
Hi, I have an issue with presets.
I have extracted the 2 zip but when I long press in Viper4android nothing appears.
What should I do ?
Anakill said:
Hi, I have an issue with presets.
I have extracted the 2 zip but when I long press in Viper4android nothing appears.
What should I do ?
Click to expand...
Click to collapse
There are three different actions, on short press, long press and mid-long press (you need that one). So lttle experiment with your finger
zgfg said:
There are three different actions, on short press, long press and mid-long press (you need that one). So lttle experiment with your finger
Click to expand...
Click to collapse
Actually, I've found the mid-long press but it only shows new preset
Anakill said:
Actually, I've found the mid-long press but it only shows new preset
Click to expand...
Click to collapse
It doesn't find Preset file
Hello my friend, thanks for sharing ...
I have a request, will there be sharing for bluetooth headset?
The model I use; Haylou GT1
zgfg said:
It doesn't find Preset file
Click to expand...
Click to collapse
Yes it doesn't.
PotentieL said:
Now regarding presets archives, once everything is installed and working, unpack the archive in /Viper4Android , just use a file manager, the folder is not hidden or anything. It will paste kernel into kernel and presets into presets...
Click to expand...
Click to collapse
Anakill said:
Yes it doesn't.
Click to expand...
Click to collapse
With Viper4AndroidFX v2.7.1.6, its settings apparently moved to (as on the screenshot):
Internal memory
/Android/data/com.pittvandewitt.viperfx/files
Anakill said:
Hi, I have an issue with presets.
I have extracted the 2 zip but when I long press in Viper4android nothing appears.
What should I do ?
Click to expand...
Click to collapse
Load The pre-configs with doble tap in the (¿Source of sound?) (Headphone, Speaker, Bt, etc)
Hi! Have any a good profile for BT headphones? (Air 2 se) I have a good volumen in poweramp but in youtube the max volumen its too low, thanks!
Enviado desde mi Mi 9T mediante Tapatalk
Hi all,
I would like to share my preset for the speaker of xiaomi 9T