[Q] Samsung Galaxy S Captivate stock in loop boot after FubuRoot flash - Android Q&A, Help & Troubleshooting

Hello,
I upgraded my Captivate to 2.3.4 samsung leaked stock ROM with any issue using ODIN 1.82, after that I tried to rooted it again because I lost it, so I followed this post http://forum.xda-developers.com/showthread.php?t=1010141 I flashed the FubuRoot kernel "fine" using ODIN, at least ODIN said PASS, I kept the usb cable plugged to avoid boot loop as the post said but the phone got stock at AT&T world phone screen, so I removed battery, sdcard and SIM and tried to get into Download mode but all that the phone does is boot loop to AT&T world phone screen... please I need help to get into download mode again...
Thanks
Solution:
1. Pull the battery
2. Press volume up/down (right in the middle)
3. Plug the USB cable (connected to the PC)
4. Insert the battery
(this will get you into the download mode, from here I flashed 2.3.4 stock kernel again)

Related

[Q] Galaxy I9100 bricked - Request help

Hi Everyone,
Need help with my I9100 which doesn't boot. I got this phone yesterday and was using it fine. Today i installed Kies and it prompted to upgrade firmware. I researched and found that it had improvements in battery life and decided to go for it. It downloaded the firmware and everything went fine until it prompted saying firmware upgrade failed and asked me to do firmware emergency recovery.
I googled to see more info regarding this error and couldnt get much information. Decided to go ahead with recovery as instructed. Again i got error " Firmware emergency recovery stopped due to GT-I9199 error". If the problem persistes please contact samsung service center.
Please suggest if this is recoverable error and any links to proceed and have a working phone.
Currently when i power on, i get a logo of phone connected to PC with yellow bang in middle. Any pointers much appreciated....
Thanks.
Don't worry, I think you can fix this yourself using ODIN. I mean, flash a custom rom through Download mode. (Turn the phone off, hold Volume Down + Home + Power for 4 seconds)
In this mode you can flash any kind of rom without doing your phone any harm. Just go to the Rom Development forum and choose your rom. I suggest Lightning Rom, because it uses ODIN, and has a very well-explained tutorial.
You can also flash a stock rom, you can get it from the Stock Rom thread, and flash that through ODIN.
Or get it fixed by Samsung and wait two weeks. (where they use exactly the same program, ODIN, to reflash the stock rom)
Look here
And here
And finally here
If all that doesn't work, take it back to samsung.
Also, KIES is a PoS, use Odin in future
Yep, KIES may look all official and reliable, but it actually seems to brick some SGS2's.
Thanks for the info's. Will try them and update soon.
No luck. I tried multiple times to update ROM using ODIN in download mode. Everytime it says NAND write operation failed and comes out. I am searching to see if any other option left before i take it back to samsung
Don't forget to try it with a different computer. Sometimes it's not the phone, it's the PC or the USB port.
Also, you can try flashing with Heimdall instead of Odin.
First of all;
Yellow triangle means you are running custom kernel/rom.
Press home+volume down and then power, to get into download mode , on your phone. If that works, take battery out, to stop it.
Go to:
Samfirmware.com
Download firmware from there. It is a rar file, I think. Open rar file to see what is in. 5 files? The biggest file has all of the other files in it.
Install via Odin. Select pda in Odin and select the biggest file from the rar.
Put your phone into download mode, connect usb and run Odin.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
Make sure that all kies processes are closed or odin will fail.
Sent from my GT-I9100 using XDA Premium App
Keis? Hmm.
Adrian.
SGS2 I9100
Lite'nin rom 3.2
it gets worse...
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
mightygoose said:
my brother let the battery fall out of his S 2 while flashing with odin, now it wont power on in any mode, the PC wont recognise it at all, when i plug in the charger the phone gets hot, but does nothing.... whats the recovery method? or is it dead well and truly...
Click to expand...
Click to collapse
You can buy a usb jig, specially designed to put you phone into download mode. Search for it on ebay. Take the battery out, plug in usb jig, replace battery and it should boot into download mode. If it does not, then the phone is dead.
Sent from my GT-I9100 using xda premium

Bricked my phone. Any help?

Hi guys,
Here's what I've done.
Galaxy S2, rooted several days ago using CF-Root no problem.
Flashed Cyanogen 7.1 been using it for a couple of days, no problem.
I had the yellow triangle on boot and I bought a USB Jig thinking that would remove it.
It put the phone into Odin mode, but didn't remove the triangle.
So then, still with Cyanogen 7.1 on the phone, I powered off the phone, connected it up on Odin and used the PDA button to flash an official Samsung Kernel (Kernel_I9100XWKI4) - I remember XKWI4 was on my phone originally before I did anything. I guess this had changed with Cyanogen being installed.
Now the situation is I cannot power the phone on at all, just black screen.
Plugging in the USB jig does absolutely nothing.
If I have Odin open and connect the phone to the PC, Odin does recognise the phone.
Can anyone help me please - only had the phone a week!
Remove battery wait 10s, put battery back and either use the jig or boot while holding home vol-down and power.
i remember when i was fixing my brother galaxy s captivate after i flashed cyanogenmod i had to install google aosp drivers as opposed to samsung drivers to get odin to recognize his phone. So...try that.
Thanks for the replies guys.
Basically ODIN can see the phone.
I had managed to get the phone to boot to the Samsung screen (triangle gone as now on Stock Kernel) however it would stay on this screen forever.
I have used ODIN and flashed CWM recovery 4.0.1.5 to the phone which I can access using the 3 key combo. Obviously after doing this, the phone now boots with the triangle however it stays on the Samsung screen permentantly.
I figured I would try to re-flash Cyanogen.
Problem I now have is that Cyanogen is on the removable SD card - the phones internal 16Gb "card" is empty.
I can't get CWM to see anything on the removable SD card.
If I simply power on the phone currently, I get the Samsung flash screen with the triangle (no longer bothered about removing this, I just want the phone to work!) and it stays like this permentantly.
I can access CWM Recovery Mode, however it cannot see the removable SD card.
I can also access ODIN download mode and the phone is detected with ODIN.
I am unsure as to what Kernel is currently on the phone.
Either connect your phone to the pc while in recovery, go to mounts and storage and mount sd (or internal memory, no idea what the actual name is) and copy the rom to the internal sd card. Or use odin to start fresh again.

[Q] YP-G70 2.2.2 stuck in boot loop

Hello there,
I was trying to flash Rj's Custom Kernel to my Glaaxy Player 5 which I had just rooted using SuperOneClick.
I went into download mode (Power+Volume-down+Back button) on my phone, opened up Odin and selected the tar file I downloaded as a PDA, Only Auto Reboot and F. Reset Time were checked, nothing else was changed.
Clicked Start and the process appeared to go Successfully in Odin, when the phone was reset the Samsung Logo appeared for longer than usual, and my computer (which was still connected via USB) complained that the USB device was not recognised, then eventually the phone rebooted to the Samsung Logo and the process repeats itself ad infinitum.
The only thing I can do is get the phone back into Download Mode, and flash another rom, but I don't know what to try, can anyone please help me get my phone back to working order?
Cheers,
Blaiz0r.
Blaiz0r said:
Hello there,
I was trying to flash Rj's Custom Kernel to my Glaaxy Player 5 which I had just rooted using SuperOneClick.
I went into download mode (Power+Volume-down+Back button) on my phone, opened up Odin and selected the tar file I downloaded as a PDA, Only Auto Reboot and F. Reset Time were checked, nothing else was changed.
Clicked Start and the process appeared to go Successfully in Odin, when the phone was reset the Samsung Logo appeared for longer than usual, and my computer (which was still connected via USB) complained that the USB device was not recognised, then eventually the phone rebooted to the Samsung Logo and the process repeats itself ad infinitum.
The only thing I can do is get the phone back into Download Mode, and flash another rom, but I don't know what to try, can anyone please help me get my phone back to working order?
Cheers,
Blaiz0r.
Click to expand...
Click to collapse
Does your player have a mechanical home button because if it has a home button that is a light capacative and also if its capacitive you need entropeys kernel search on google

[Q] Samsung Galaxy SII HD LTE Stock Recovery Problems

Hello, I have a Samsung Galaxy SII HD LTE (SGH-1757M) on Bell (Canada).
I've been having some problems with this phone and I really need some help.
Okay so I need to flash stock firmware onto my phone, but I can't use ODIN or Kies because my computer will not recognize my phone (USB port damage). So I've been trying to use the Stock Recovery on the phone but every time I try to flash it, my phone just reboots and reloads Stock recovery and doesn't do anything after that. I have to pull my battery out to restart the phone normally. What I did was download my stock rom for my phone (correct region, and firmware) and when I tried to flash the .zip file it said "E:verification failed" so I unzipped it and tried the md5 file and this time it takes a little while then the screen flashes black then restarts the Stock Recovery UI but then freezes and I am forced to pull the battery out.
The reason I want to reflash my rom is because my phone acts very odd. If I try to shut down my phone it just reboots, I can't charge my phone (have to use other Samsung phone to charge battery), computer won't recognize phone.
Thank you in advanced! :fingers-crossed:
natemac1 said:
Hello, I have a Samsung Galaxy SII HD LTE (SGH-1757M) on Bell (Canada).
I've been having some problems with this phone and I really need some help.
Okay so I need to flash stock firmware onto my phone, but I can't use ODIN or Kies because my computer will not recognize my phone (USB port damage). So I've been trying to use the Stock Recovery on the phone but every time I try to flash it, my phone just reboots and reloads Stock recovery and doesn't do anything after that. I have to pull my battery out to restart the phone normally. What I did was download my stock rom for my phone (correct region, and firmware) and when I tried to flash the .zip file it said "E:verification failed" so I unzipped it and tried the md5 file and this time it takes a little while then the screen flashes black then restarts the Stock Recovery UI but then freezes and I am forced to pull the battery out.
The reason I want to reflash my rom is because my phone acts very odd. If I try to shut down my phone it just reboots, I can't charge my phone (have to use other Samsung phone to charge battery), computer won't recognize phone.
Thank you in advanced! :fingers-crossed:
Click to expand...
Click to collapse
Replace USB port first...get it from eBay.

[Q] galaxy p1000 cant boot

HI,
Im using a galaxt tab GT-p1000 3g froyo 2.2 which is bought from dubai . there were few issues since last few weeks where i could not boot the device. I have done the factory reset few times also. After that i rooted the device using oneclick(SuperOneClickv1.9.5-superoneclickdownload.com) it was completed and rooted where i got the superuser too.now the device is not getting booted again. it shows the samsung logo and getting dragd.i tried reset and reboot through the recover mode that also dosnt work.
please help me with this
kasun
Download Odin. http://www.android.gs/download-odin-3-07/
Find the original firmware for your device and download to your PC. (I can't help you with this)
Turn your phone off.
Boot into download mode on your phone (volume down + power button; hold for about 3 seconds whilst it boots).
Plug your phone into your PC via USB. Wait for the ID:COM message to show in Odin.
Follow the instructions here to flash the firmware onto your device: http://forum.xda-developers.com/galaxy-s3/help/guide-odin-flash-guide-t1671969
Reboot.
You WILL lose any data you have that isn't on an external SD card. That is the only data which will be safe.

Categories

Resources