Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
blupo said:
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
Click to expand...
Click to collapse
What do you mean by System Update? What are you on now? Are you trying to flash a ROM? Going to /Downloads and flashing OTA sharp shooter; not sure what you mean by this at all......
blupo said:
Ive just about tried everything to get my phone to do a system update. When i do try to update it. It starts up Teamwin Recovery and says updated aborted. So i tried to flash the update manually by going to /downloads then trying to flash the OTA Sharp shooter and thats when i get the E:Error in /tmp/sideload/package.zip (status 7) at the end. So if anyone could help would be greatly appreciated.
Click to expand...
Click to collapse
A HTC OTA update cannot be flashed using a custom recovery, that is why you are getting the second error. Also a OTA will fail when HBoot attempts to run it when you have a custom recovery installed, that is probably the source of. First error.
Bottom line is that an OTA cannot be installed when you have a custom recovery, so just fine a custom, rooted Rom that is based on the OTA and flash that instead.
all you gotta do is go to recovery try to install it when you get the error pull the battery and go back into recovery from bootloader
Thanks i would make you kool-aid but im fresh out... and that didnt work either
---------- Post added at 12:45 AM ---------- Previous post was at 12:40 AM ----------
Yea i think your right... O well
Hey guys,
I had a similar problem when trying to flash my Nexus s with CyberGR mod.
Tried pretty much everything from trying to wipe system/dalvik/cache/factory reset and also disabled signature check.
Nothing really happened, i kept getting the error again.
Then i had flashed the recovery image (had a TWRP 2.0 running... changed it to CWM) and then the flash went on just fine.
So my guess is that this something to do with the recovery ROM. I would want to ensure that the recovery image used by the dev and mentioned in the install instructions be used.
Hope this helps.
I just reboot recovery and that fixes it when that happens. Have you tried that? No need for battery pull imo
Related
I am new to the flashing rom thing.
Well what happened was....I thought was flashing the viper rom, and I had to use my recovery to unscrew what I didy. Can someone give a short tutorial on flashing roms? I am not a complete **** nugget btw haha.
I loaded the zip file on my SDcard and used the TWRP to flash from zip. Was that wrong?
install error with teamwin recovery.
e:error in /tmp/sideload/package.zip
(status 1)
That is what i got. I read that binary thing was not the updated.
ive tried everything to get my tablet back to stock. as of now i am on overcome ROM. ive followed every guide i could fiund to get back to stock and nothing works. wheni try to flash anything i get 2 errors.
when i try to flash the hc-3.1_ota-full_sam_tab_10.1.zip i get this error:
assert failed: getprop("ro.bootloader") == "P7100BUKB7"
E:Error in sdcard/hc-3.1_ota-full_sam_tab_10.1.zip
(Status 7)
Installation aborted.
when i try to flash anything else, i get this error:
assert failed: getprop("ro.bootloader") == "P7100BUKB7" || assert failed: getprop("ro.bootloader") == "P7100BUKB8"
any help on this is greatly appreciated. i mean any help. thank you.
so, i tried again this morning and have still got the same results. has ANYONE else had this issue? or something simular? i am at my end. this is what ive tried so far:
flash the stock
flash another rom
factory reset
flash restock from overcome
nothing is working. someone has to have some information on this.
thanks!!
SOLVED!!!
this is what i did to get back to stock after getting the errors above.
first thing, i re-rooted my tab.
once re-rooted, i flashed the hc-3.1_ota-full_sam_tab_10.1.zip
then i did used ODIN to flash the stockrecovery file. (everything you need is ont the files for dummies zip
on the tab re-booted, it was stuck in a bootloop.
so i got back into recovery and did a factory/data reset/wipe.
tab rebooted and everything is working fine. back on stock.
android version 3.1
kernel 2.6.36.3
[email protected]#1
build number
hmj37.uekf3 p7510uekf3
hope this helps anyone having the same problem.
Which method to re-root did you use? I have the same issue.
EDIT: Nevermind! Got it! Thanks
jcporter80 said:
Which method to re-root did you use? I have the same issue.
EDIT: Nevermind! Got it! Thanks
Click to expand...
Click to collapse
Ack! Which method did you use to re-root? I'm getting the same error. I'm trying to root by flashing the root zip file in CWM. It flashes fine, but then I still get the same error. Is there another way to do it?
The problem seems to be the CWM version. I was on 5.x that came with one of the ROMs. So I used ODIN to flash the older CWM 4.0.0.4. Then I was able to flash the stock hc-3.1_ota-full_sam_tab_10.1.zip file.
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
error in /tmp/sideload/package.zip status 0
Help some 1 walk me through this mess. Matts download is taking 10 hours to download. Is there an external link I can use>?
n30r3b3l said:
Im trying to flash Cool ICS v5 and when it gets to Installing SYSTEM Partition I get an error E:Error in /tmp/sideload/package.zip (status 0) does anyone have any ideas on how to get around this? I would really like to use this rom. I unlocked the bootloader using HTC unlock and then i flashed the boot.img included in Cool-ICS-v5-EvoC.zip.
Click to expand...
Click to collapse
you have two options...one is redownload the zip file from a different site or open up the one you have and manually delete that zip file from there and it should bypass and continue on... what it ma do to the rom is on you ... if you extract the package.zip and then open it youll see what files the zip contains...if it contains no files it is likely corrupt and need to download a new rom...what site did you download the ROM from and are you a cdma or gsm model phone?
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
ishsed said:
see im having the same problem i tried the [Cool Sense] Rom and the ZR3D-XL SENSE Rom and TeamGenesisRom3d and it all gave me the Error in /tmp/sideload/package.zip (status 0) so i had to install my old rom back MikVirgin Rom. Can it be because im still using twrp recovery and not 4EXT Recovery Control
Click to expand...
Click to collapse
I've noticed all the people who get that error are using twrp. So I recommend using 4ext.
Read, Search, Read again, ... Then Ask with Tapatalk 2
Hi, I was running CM11 for xt910 and was planning to return to stock.
It wouldn't work via bootmenu manager. it would give the following error:
Installing: /sdcard/0/update.zip
Finding update package...
Opening update package...
Installing update...
Warning no file_contextsVerifying current system...
assert failed: apply_patch_check("/system/bin/app_process", "76c3a9a7a6d400a9ff3e4db391327daa33aa0663", "2a221441bf06f2618aa6c35ae0cade13bd4f6e1b")
E:Error in /sdcard/0/update.zip
(Status 7)
Installation aborted.
or something similar.
So I attempted flashing via RSD lite, after temporary unrooting via voodoo root manager.
It says successfully installed, but at the rebooting process it hangs. (or is it usual that first startup takes over 5-10 minutes and recovery mode gives an android with a red triangled exclamation, not enabling me to do any of the actions?).
So my only chance is to fix this with fastboot. what should I do?
aki93 said:
Hi, I was running CM11 for xt910 and was planning to return to stock.
It wouldn't work via bootmenu manager. it would give the following error:
Installing: /sdcard/0/update.zip
Finding update package...
Opening update package...
Installing update...
Warning no file_contextsVerifying current system...
assert failed: apply_patch_check("/system/bin/app_process", "76c3a9a7a6d400a9ff3e4db391327daa33aa0663", "2a221441bf06f2618aa6c35ae0cade13bd4f6e1b")
E:Error in /sdcard/0/update.zip
(Status 7)
Installation aborted.
or something similar.
So I attempted flashing via RSD lite, after temporary unrooting via voodoo root manager.
It says successfully installed, but at the rebooting process it hangs. (or is it usual that first startup takes over 5-10 minutes and recovery mode gives an android with a red triangled exclamation, not enabling me to do any of the actions?).
So my only chance is to fix this with fastboot. what should I do?
Click to expand...
Click to collapse
CM11? Are you sure?
If you have the SBF Fastboot file, located Here, RSDLite under AP Fastboot, and start from scratch!
I've never used BMM, I'm a Safestrap advocate (since it's all I've used). It will retain Stock (as long as you don't overwrite it), and then all you have to do, if you encounter a really glitchy rom, is wipe that Romslot (partition), and recreate/reinstall whatever you want.
I hope I was of SOME assistance.
LuckiestNut419 said:
CM11? Are you sure?
If you have the SBF Fastboot file, located Here, RSDLite under AP Fastboot, and start from scratch!
I've never used BMM, I'm a Safestrap advocate (since it's all I've used). It will retain Stock (as long as you don't overwrite it), and then all you have to do, if you encounter a really glitchy rom, is wipe that Romslot (partition), and recreate/reinstall whatever you want.
I hope I was of SOME assistance.
Click to expand...
Click to collapse
Aah cool, thanks! In desperacy i continued trying to fix it through the night.
This rom fixed it.
http://click.xda-developers.com/api...font></font>&jsonp=vglnk_jsonp_13789119385876
Good deal, glad you're rolling again. Now on to the next mistake! Ha. I pulled my hair out for two weeks battling mine. Live and learn.
Sent from my SCH-I535
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Make sure u are using the latest version of cmw... Most of the status 7 fails have to do with this.
Sent from my GT-I9300 using xda app-developers app
I am using the most updated... and tried with other recoveries but no sign of progress. And I have read some threads with some possible solutions but still stuck... :/
vncsalencar said:
Hey guys.
So, I need some help here... I am trying to flash the PPX Stock V3 rom for Galaxy S3 but I always get the (status 7) error. I tried with another roms and it is the same problem. But I got to flash the ones with aroma installer and it works fine, but I want exactly this PPX Stock rom... I was using the Clockwordmod Touch Recovery and it wasn't working (getting this error) and I've changed to PhilZ Touch and it the problem continues...
Do you have some ideas on what to do?
So, thanks to all.
[EDIT]~
By the way, the problem starts in this line while flashing the .zip
Pure Performance X Firmware
Installing System...
Simlinking...
set_perm: some changes failed
E: Error in /storage/sdcard1/[ROM~[XXUGNA7][4.3.1] PPX Stock V3.zip
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
Try reading the FAQ for philz recovery